* nxos_vlan: fix broken purge behavior (issue #57101)
Symptoms/Analysis:
- `nxos_vlan` `purge: true` would fail when `purge` was trying to delete all unspecified vlans, including vlan 1.
- `nxos` devices do not allow removing vlan 1 and raise a cli exception error
- Previous fix#55144 caused a side effect when `purge` was used: vlan changes specified by `aggregate` were ignored; e.g.
- vlan 4 is not present; playbook specifies `aggregate: { vlan: 4 }, purge: true`
- results in proper purging but vlan 4 is not created
Solutions:
- ignore vlan 1 when purging
- remove the `not purge` check from state present logic
Added additional unit tests and integration tests.
Tested against all regression platforms.
* PEP fixes
* Add agg_show_vlan_brief.txt fixture
* Add warning for removing vlan 1
* change method name check
* Attempt 2 of cert validation fixes
* Remove unused code
* Cleanup the tmp cert using atexit
* Fix linting issues
* Only add SSLValidationHandler when not HAS_SSLCONTEXT
* Catch value errors on non PEM certs
* Only catch NotImplementedError to avoid masking issues
* set self._context even with PyOpenSSLContext for conformity
* Fix error building
* normalize how we interact with the context we create
* Remove unused code
* Address test for py3.7 message difference
* open_url should pass the ca_path through
* Account for new error in url lookup test
* Guard some code behind whether or not we are validating certs
* Make _make_context public
* Move atexit.register up to where the tmp file is created
* Returns zone ID for existing zone or `null`
* route53_zone: add module unit tests
* route53_zone: add compatibility with Python 2.6 to the unit tests
* route53_zone: address pycodestyle warning (add blank line)
- Also return url and update docs for other values to indicate they are only returned on success.
- Add integration tests
- Use info variable for common return values
- Use -1 as default status rather than None. This is lines up with with existing code in urls.py
- Add unit tests to ensure status and url are returned on failure
* Adding New Model onyx_qos for Configuring QoS on Onyx Switches
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Pep8 Failures in onyx_qos
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Pep8 Failures phase 2
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Samer's Comments on onyx_qos Module
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Shippable Comments Phase 3
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Current Version 2.9
Signed-off-by: Anas Badaha <anasb@mellanox.com>
Ensure the module still work with the ESXi where CustomFieldsManager
does not exist.
From: https://www.vmware.com/support/developer/converter-sdk/conv60_apireference/vim.CustomFieldsManager.html
The CustomFieldsManager object is used to add and remove custom fields to
managed entities.
The custom fields values set on managed entities are available through the
customValue property and through the summary objects for VirtualMachine
and HostSystem. They are not available directly through this managed object.
This functionality is only available through VirtualCenter.
Fixes: #56071
* Adding Support For EVPN in BGP Module
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Pep8 Failures in onyx_bgp.py
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Pep8 Failures in onyx_bgp.py Phase 2
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Samer's Comments
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Remove file Variable
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Adding Support for NVE Protocol in onyx_protocol
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Pep8 Failures in onyx_protocol.py
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Adding Support for Traffic Class in Onyx Switches
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Enhancing the code and elemenating code duplicate
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* use navigate_value instead navigate_hash
* add async wait method
* update dict compare
* remove unuse methods
* not all modules have timeouts parameter
* navigate_value, the input data may be None
* remove external grep call and parse with python
* use function for repeated code
* use module.get_bin_path() for iscsiutil on HPUX
* some code opt for HPUX
* clean up non-module code, module being defined is a requirement for this code
* import get_bin_path() directly and use without module prefix
* Add integration tests for AIX and HP-UX
* add changelog fragment
* Apply suggestions from code review
Co-Authored-By: mator <matorola@gmail.com>
* Apply suggestions from code review #2
Co-Authored-By: Sam Doran <sdoran@redhat.com>
* Remove strict requirement on executable to exist for get_bin_path() as
it will allow facts gathering to continue without an error. Almost all
other files under facts do not have "required=True" (except 2 files,
which should be probably fixed). And check return value for
get_bin_path() , before run attempt.
* add check for AIX lsattr run_command return code
* Add custom action class for version info
* Use args from CLI as prog for ArgumentParser object
* Make prog a required parameter of create_base_parser() and update all uses to pass in the newly required parameter.
* Add unit test for checking ansible --version
* Update other related unit tests
* Support using importlib on py>=3 to avoid imp deprecation
* Add changelog fragment
* importlib coverage for py3
* Ansiballz execute should use importlib too
* recursive module_utils finder should utilize importlib too
* don't be dumb
* Fix up units
* Clean up tests
* Prefer importlib.util in plugin loader when available
* insert the module into sys.modules
* 3 before 2 for consistency
* ci_complete
* Address importlib.util.find_spec returning None
* Start of migration to argparse
* various fixes and improvements
* Linting fixes
* Test fixes
* Fix vault_password_files
* Add PrependAction for argparse
* A bunch of additional tweak/fixes
* Fix ansible-config tests
* Fix man page generation
* linting fix
* More adhoc pattern fixes
* Add changelog fragment
* Add support for argcomplete
* Enable argcomplete global completion
* Rename PrependAction to PrependListAction to better describe what it does
* Add documentation for installing and configuring argcomplete
* Address rebase issues
* Fix display encoding for vault
* Fix line length
* Address rebase issues
* Handle rebase issues
* Use mutually exclusive group instead of handling manually
* Fix rebase issues
* Address rebase issue
* Update version added for argcomplete support
* -e must be given a value
* ci_complete
* Remove code but leave the metadata so that they can be listed as
removed in documentation.
* Remove removed modules from validate-modules ignore
* Remove unittests for the removed nodules
* Remove links to removed modules and add list of removed moduels to the
2.9 porting guide
Daniel Mellado Area