* Better cidr_ipv6 validation in ec2_group.py
* Improve warning/error handling, add changelog
* Update unit test for ipv6 validation
* Fix logic that was causing non /128 cidrs with host bits to not be handled
(cherry picked from commit 4308b87d72)
pytest.raises has two parameters, message and match. message is meant
to be the error message that pytest gives when the tested code does not
raise the expected exception. match is the string that pytest expects
to be a match for the repr of the exception. Unfortunately, it seems
that message is often mistakenly used where match is meant. Fix those
cases.
message is also deprecated so removed our usage of it. Perhaps we
should write a sanity test later that prevents the use of
pytest.raises(message) to avoid this mistake.
seealso: https://docs.pytest.org/en/4.6-maintenance/deprecations.html#message-parameter-of-pytest-raises
Also update the exception message tested for as we're now properly
detecting that the messages have changed.
(cherry picked from commit 87601969a3)
Fix root filter test
On python-2.6 the error message is different
(cherry picked from commit 67fb3a8215)
Fix the pytest match test for python-2.6
(cherry picked from commit 8a880d6032)
Correct variable name for skipping of the gitlab test when gitlab python
client is not installed.
(cherry picked from commit 0c992d5ae4)
Co-authored-by: Toshio Kuratomi <a.badger@gmail.com>
Commit b7724fdf85
appears to have caused a regression, where `ip4`, `gw4`, `ip6`, `gw6`
were converted to `ipv4.address`, `ipv4.gateway` etc.
This causes bootproto (or `ipv4.method`) to remain `dhcp`, as noted in https://github.com/ansible/ansible/issues/36615
This commit only reverts the key-value pairs to the original names,
which is in line with both expectation (manual ip addr == no dhcp) and
the language used in the playbook, which is, for example, "ip4" not
"ipv4.address"
Co-authored-by: Stuart Pollock <spollock@pivotal.io>
Co-authored-by: Tyler Ramer <tramer@pivotal.io>
(cherry picked from commit 8d0f2e5725)
* Skip gitlab tests if dependencies aren't met
* Skip certain unittests if passlib is not installed
* Fix tests with deps on paramiko to skip if paramiko is not installed
* Use pytest to skip for cloudstack
If either on Python-2.6 or the cs library is not installed we cannot run
this test so skip it
(cherry picked from commit 8acf71f)
Co-authored-by: Toshio Kuratomi <a.badger@gmail.com>
* Improve error for docker modules when docker-py can't be imported.
* Add changelog.
* Mention platform and Python interpreter in more cases.
* Clarify wording.
* Adjust tests.
(cherry picked from commit 4a12be31fb)
* kubevirt: enable/update tests + fix merge_dicts() (#57685)
* Actually run the unit tests and separate them into two files
* Re-add recursion to merge_dicts()
* Update tests to work with current code
(cherry picked from commit 51add5aa79)
* Changelog fragment
* Replace nested function with dict_transformations.dict_merge
* FTD configuration module: fix a bug with response parsing (#57480)
* Update dependence's name to firepower-kickstart
* Check response type before getting attributes
* Add unit test for construct_ansible_facts method
* Update error message
(cherry picked from commit 4fa93d5b9b)
* Add backlog entry
* nxos_vlan: fix broken purge behavior (issue #57101) (#57229)
* nxos_vlan: fix broken purge behavior (issue #57101)
Symptoms/Analysis:
- `nxos_vlan` `purge: true` would fail when `purge` was trying to delete all unspecified vlans, including vlan 1.
- `nxos` devices do not allow removing vlan 1 and raise a cli exception error
- Previous fix#55144 caused a side effect when `purge` was used: vlan changes specified by `aggregate` were ignored; e.g.
- vlan 4 is not present; playbook specifies `aggregate: { vlan: 4 }, purge: true`
- results in proper purging but vlan 4 is not created
Solutions:
- ignore vlan 1 when purging
- remove the `not purge` check from state present logic
Added additional unit tests and integration tests.
Tested against all regression platforms.
* PEP fixes
* Add agg_show_vlan_brief.txt fixture
* Add warning for removing vlan 1
* change method name check
(cherry picked from commit 6bb13bbb84)
* changelog
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* nxos_vlan: vlan names containing regex ctl chars should be escaped (#55463)
The `nxos_vlan` module may raise with regex error `sre_constants.error: multiple repeat` in the non_structured codepath if the device has existing vlan names with certain regex control characters; e.g.
```
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Eth1/3
14 my-vlan-name-is-*** active
```
(cherry picked from commit de8ce08fd8)
* fix nxos_vlan mode idempotence bug (#55144)
* fix nxos_vlan mode idempotence bug
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* Fix CI failure
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
(cherry picked from commit 57e0567310)
* nxos_vlan fix 2.8 backport
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* Adding Support For Vxlan In Onyx Switches
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Pep8 Failures in onyx_vxlan.py
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Pep8 Failures in onyx_vxlan phase 2
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Shippable failures
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Samer's Comments on PR
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Adding New Model for Configure Buffer Pool on Onyx Switches
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Pep8 Failures in onyx_buffer_pool.py
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* fix missing attribs with dirct module execution
* also make remote tmp handling smarter
update tests
* set default if attrib does not exist
* add simple test
* add asa_og module
* add test
* fix pep8
* fix some sanity pylint
* fix import error order
* fix import
* replace cmd() method
* rename file and class
* add mock for connection
* fix commands in replace test function
* fix lines list
* update unit test
* fix 'and' logic for port-object command
* restore previous unit test; fix pep8 and remove debug
* other unit tests
* Add state present, absent, replace
* Update doc; add default for state
* update unit test with state present/absent
* fix typo in unit test
* fix pep8 too many blank lines
* fix show run for service object ASA Ver 8.x
* Add description field; fix bug for state present and absent
* Re-designed module structure for network, service and port objects
* update integration test for new module structure
* fix pep8
* update EXAMPLES and RETURN
* update units tests
* fix module typos in unit test
* removed provider from examples
* fix missing comma in replace test
* fix module name and remove provider
* update license
* remove register; update license; change import order; chage def state
* remove shebang
* fix doc default state
* change import order
* Update year in banner
* fix integration test as set of tasks
* remove arg_spec
* remove extends_documentation_fragment: asa
* Update DOC, remove unused import, change import order
* Add latest updates from FTD Ansible downstream repository.
- add a better implementation of the upsert operation;
- add API version lookup functionality;
- add filter which remove duplicated references from the list of references;
- fix minor bugs.
* fix issues outlined by ansibot
* fix argument name for _check_enum_method
Currently, if we try to stop or start a network two time in a row, the
second call will fail. With this patch:
- we don't recreate a network, if it exists
- we only stop a network if it's active, and so we avoid an exception
saying the network is not active
* test: mock libvirt
* add integration tests for virt_net
* test: enable virt_net test on RedHat 7 and 8
* ci: use the unsupported alias
* tests that require privileged mode are run in VM
* virt_net/create raise unexpected libvirt exception
* import mock from units.compat
* virt_net: do not call create() on "active" network
* virt_net func test: only clean up the libvirt packages
* test: virt_net: don't use assert_called()
* virt_net: add the destructive alias
* move the test in virt_net dir
* test/virt_net: clean up the network at the end
* Add to_ipv6_subnet function
* Use the correct function for subnet
* Corrected code style and tests
* Corrected testcase assertion
64 bits make 8 octets, or 4 hextets
* Import from correct module directly
* Add support for multiple IPv6 addresses in nxos_l3_interface module
Cisco support multiple IPv6 addresses on each interface but only the first
IPv6 is considered by this module. There is no impact on the configuration
but the module is not idempotent.
* Add internal support for IPv6 list
* Fix module idempotency
* Initialize tests for nxos_l3_interface
* Fix IPv4 removal idempotency
* Fix data extraction from nxos config
* Fix silently ignored interfaces in nxos_l3_interface
* Add warning when interface does not exist in nxos config
* Adding cnos_user module to Ansible
* Update cnos_user.py
* Adding Functional test cases and unit test cases.
* Fixing Bug found in testing with Lenovo Mars.
* Review comments incorporated
* Review comments implemented.
* Copy paste mistake
* Modify EXOS module utils to utilize 'httpapi' or 'network-cli' connection
* Changes to cliconf plugin to support 'json' or 'text' output for compatibility between network-cli and httpapi
* Add HTTPAPI plugin supportng JSONRPC and RESTCONF for EXOS
* exos_facts modify commands with run script cli2json.py to command dictionary specifying 'json' output
Load appropriate fixtures
* Update exos_config module to utilize the get_diff and get_default_flag functionality.
JSONRPC doesn't work well with pipes, regex MULTILINE
* Support for NOS agnostic 'cli_config' module by implementing 'get_default_flag' and 'get_diff' functionality
* Update Ansible Documentation regarding the connections available for EXOS
Wojciech Wypior