Ensure `wait_condition`s with `Status: Unknown` actually
complete
Return k8s object after wait rather than k8s object before
wait when object is patched.
* [docker] images: add support for lookup by sha256 digest
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* [tests] docker image by digest: work on a minimal test case
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* [docker] group branch conditions per lookup
Co-Authored-By: Felix Fontein <felix@fontein.de>
* [misc] add a news fragment for the added digest lookup for docker images
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* Allow python_requirements_facts to cope with packages with dashes
```
python_requirements_facts:
dependencies:
- kubernetes-validate
```
should work as expected
* Ensure tests run for python_requirements_facts
* azure_rm_azurefirewall
* a few updates
* fixed mistake
* updated docs, fixed syntax
* updated priority
* use checkmode for idempotence test, as it's very long
* fix check mode
* Attempt to handle just mode trunk properly
* Add test for trunk-only config and clean up tests
* Add missing eapi tests and remove references to provider as we do not test local
* Unchanged requests now return the original data
* Add changelog fragment
* Add integration tests for returned data for meraki_network
* Add integration tests for returned data
* Improve idempoetent output
- Make MX l3 rules always show default rule
- Add integration tests
* Add integration tests for returned data on meraki_network
* Improved idempotency in a few modules and improved tests
* Add waiter for AWSRegional
* Add support for WAF Regional
* Add support for regional waf web acl
* Remove set_trace, pep formatting
* Add paginator for regional_waf
* Change name of param for waf_regional
This is more in line with how AWS refers to the service. Additional
changes made to how client is called. Used ternary to reduce if
statements
* Change parameter name to waf_regional
* Add support for removal waf regional condition
* Change parameter from cloudfront to waf_regional
* Added state: absent waf rule
* Remove set_trace
* Add integration tests for waf regional
* WIP: adding region parameter to tests
* Add support for waf facts module
* Add region to waf regional integration tests
* Update security policy for waf regional testing
* Add type to documentation for waf_regional param
* Rewrite much of the execution of meraki_switchport
- Previous versions had problems with idempotency and allowed_vlans
* Modified payload creation
- Parameter map is used
- propsed is created using .copy()
- Much cleaner this way
* Add whitespace for lint
* Add bugfix snippet for changelog
* Adds a new vmware module to support getting the folders and their paths within a datacenter
* Add integration tests
* Bump version added
* Refactor integration test
* Improve grammar in docs
* auth_key parameter is required
- This will have to change when httpapi is implemented
* Add integration test
* Add assertion
* Enable VLANs on network
* Add required for auth_key
It is possible we are using a different username then 'ansible' for
testing junos. By using ansible_user_id, this should be a more dynamic
check.
Signed-off-by: Paul Belanger <pabelanger@redhat.com>
* Fixed error handling in github_issue module
Due to recent changes in github3.py library module stopped working.
This fix adds extra error handling for new changes in library.
Fixes: #39627
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Check version
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Refactor github_issue
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Change S3 bucket urls to new method as per #56124
* duplicate / and dded changelog fragment
* Revert "duplicate / and dded changelog fragment"
This reverts commit b89d5cbe6d.
* duplicate /
* Rewrite vmware_portgroup module
* support check mode
* VLAN ID isn't required anymore
* VLAN ID 0 (no tagging) is the default
* Options match values in vSphere Client and vmware_vswitch module
* Policy override is configured properly
* VMware: vmware_portgroup updates
Ensure the module still work with the ESXi where CustomFieldsManager
does not exist.
From: https://www.vmware.com/support/developer/converter-sdk/conv60_apireference/vim.CustomFieldsManager.html
The CustomFieldsManager object is used to add and remove custom fields to
managed entities.
The custom fields values set on managed entities are available through the
customValue property and through the summary objects for VirtualMachine
and HostSystem. They are not available directly through this managed object.
This functionality is only available through VirtualCenter.
Fixes: #56071
The use of the `hostvars[esxi1].ansible_host` was attempt to use
different hostname and IP address. But it's actually the source of
more problems.
VMware expects to be able to resolvable the host name. This means, that
if someone wants to run the test-suite, s/he needs to use a DNS or
update the `/etc/hosts` files on the different hosts.
* nxos_switchport: remove deprecated test target files
* Remove tests for nxos_ip_interface, nxos_portchannel; update nxos_interface
- `nxos_ip_interface` and `nxos_portchannnel` tests have been removed
- `nxos_interface` now uses current module `nxos_l3_interface` instead of `nxos_ip_interface`
* nxos_vpc:Fix idempotency issues with multiple attributes
Several attributes were causing idempotency problems on various platforms:
- `auto_recovery`
- This command can be disabled on certain platforms and will nvgen as `no auto-recovery`
- When enabled it has an additional optional-keyword for changing the `reload-delay` timer value
- This was addressed by adding a new attribute `auto_recovery_reload_delay` to handle setting the timer value
- This new attribute is mutually exclusive with `auto_recovery`
- `/show run vpc/show run vpc all/`
- Changed the command that gets state to `all` so that it could differentiate between `auto-recovery` and `auto-recovery reload-delay`
- This change resulted in also changing some attribute handling withing `get_vpc`, since some attributes like `peer_gw` relied on presence of the config to determine state true or false. With `all` the config is always there so these attrs must specifically check for `'no '` in the string.
- `delay_restore`
- This command has two additional, optional keywords that exist on some platforms and not others.
- New attrs:
- `delay_restore_interface_vlan`
- `delay_restore_orphan_port`
- Modified the `sanity` test to include the new attributes and to fix the platform issues.
- Bugfix Pull Request
`modules/network/nxos/nxos_vpc.py`
- Validated `nxos_vpc` `sanity` test on these platforms, all are now 100% Pass: N35, N3K, N3K-F, N6K, N7K, N9K, N9K-F
- TBD: Future work is needed to add support for `peer_gw_exclude_gw` timers. This could be addressed in the same way as the `auto_recovery_reload_delay` changes included here.
* lint fix
* Add 'version_added' tags for new options
* nxos_snmp_user: platform fixes for get_snmp_user
snmp user output behavior varies quite a bit for the different nxos platforms and required several workarounds:
- N5K/N6k
- These platforms do not support structured output for `show snmp user`.
- The current code lands in an `except` clause when the output is not structured; so I added a new `get_non_structured_snmp_user` method to scrape the state from the regular cli output if it's present.
- N9K-F
- The `group` data in the JSON output is different for this platform; it has a different key (just `group` instead of `TABLE_groups` or `group_names`) and it is not indexed
- For a single group the value is a string, for multiple groups it's a list
- sanity
- N5K/N6K/N9K-F platforms will reject `no snmp user <name> <role>` when it's the last role defined for the user.
- workaround is to use `nxos_user` to remove the user
- Changes validated on:
- `N3K, N3K-F, N35, N6K, N7K, N9K, N9K-F`
- `6.0(2)A8`
- `7.0(3)I2, 7.0(3)I4, 7.0(3)I5, 7.0(3)I6, 7.0(3)I7`
- `7.3(2)D1`
- `7.3(3)N1, 7.3(4)N1`
- `8.3(2)`
- `9.2(2), 9.2(3)`
* fix lint warning
* Same api client can be used for other service as well
* Incorporated Review comments. Modified Category and Guest Fact modules which are also dependent on vmware_rest_client module util
* Adding Integration Tests for vmware_rest_client changes
* Changes to incroporate changes in vcsim testware
* Change to get vm name to attach the tag
* Alter tests to pass
* Change diff_against to make changed work again
* Add another diff_against
* Expose supports_sessions across all EOS connection types
* Change session warning to failure
* supports_sessions needs to be a method to survive the rpc boundary
* Alter tests to match
It is possible the EOS appliance doesn't have an IP address on the
management1 interface, instead just check we have found that interface.
Signed-off-by: Paul Belanger <pabelanger@redhat.com>
* sysctl will now return an error if the value is invalid
sysctl can fail to set a value even if it returns an exit status 0. More
details: https://bugzilla.redhat.com/show_bug.cgi?id=1264080. Because of
this in case of an invalid value or a read-only file system, sysctl
module would return OK, even though it didn't set anything. To be sure
that sysctl correctly applied the changes we also need to check the
output of stderr.
* Run sysctl with LANG=C
Because we are parsing sysctl stderr we need to make sure that errors
are persistent across different system language settings.
* Add changelog fragment for sysctl
- Created `sanity.yaml` to contain all of the tests previously kept in separate files
- Removed `cli` and `nxapi` test directories
- Tested on current supported platforms and versions: `N3K,N6K,N7K,N9K,N3K-F,N9K-F`
Abhijeet Kasurde