* Python 3.11.4 introduces a new parameter 'filter' in extract and
extractall in tarfile. Handle deprecation warning message emitted
in Python 3.12.
* added probing mechanism in ansible-galaxy code to detect broken
data filter implementation in tarfile.
Fixes: #80832
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
Co-authored-by: Matt Clay <matt@mystile.com>
* Enable mypy for the entire packaging directory
* Return CompletedProcess only when capturing output
This allows stdout/stderr on CompletedProcess to be `str` instead of `str | None`.
The unused args on CompletedProcess have been removed.
Overload type hints have been added to reflect these changes.
* Relax return type on ensure_venv
This improves consistency with its usage, since `run` accepts `env` of `dict[str, t.Any]`.
Also removed unnecssary `str()` usage when updating `env`.
* Fix type hint on suppress_when
* Fix callable annotation
* Add type hint for command_parser
PyCharm complains about using a protected member, and also that it can't find the type in the type stubs.
However, mypy properly recognizes the type.
* Avoid unnecessary TypeVar usage
Since man pages aren't accessible to users after a `pip install`, there's no need to include them in the sdist.
This change makes it trivial to build man pages from source, which makes them much easier to iterate on.
It also simplifies creation and testing of the sdist, since it no longer requires building man pages.
The new `packaging/cli-doc/build.py` script can generate both man pages and RST documentation.
This supports inclusion on the docs site without a dependency on `ansible-core` internals.
Having a single implementation for both simplifies keeping the two formats in sync.
Releases are now built using the `packaging/release.py` tool.
This makes the `Makefile` and associated files in `packaging/release/` and `packaging/sdist/` obsolete.
This patch modifies the in-tree build backend to build sdists that swap
out pointers to it in the `pyproject.toml`'s `[build-system]` section.
The effect of this is that the first build from source (for example,
from a Git checkout) uses our PEP 517 in-tree build backend. But the
produced tarball has `build-backend` set to `setuptools.build_meta`
which is the native build backend of `setuptools`. So any following
builds from that sdist will skip using the in-tree build backend,
calling the setuptools' one.
The good news is that if the first build generated the manpages, they
will be included and won't go anywhere even though, a different build
system is in place.
Combined with #80253, this will make sure not to modify the current
source checkout on that first build.
Co-authored-by: Matt Clay <matt@mystile.com>
* Add _convert_rst_in_template_to_manpage arg types
* 📦 Make manpage build dependencies conditional
Previously, said dependencies were declared as unconditionally
required even when manpages not needed to be built. This patch
Makes it so they are only required when needed.
* Correct _generate_rst_in_templates returned type
It was marked as Path before this patch but in fact, it's iterable of
paths.
* 🎨 Convert RST to manpage in-memory @ PEP 517
Previously, the automation was writing a temporary templated RST on
disk and calling a helper CLI script on that. But with this change, it
happens with less unnecessary I/O.
Co-Authored-By: Matt Davis <6775756+nitzmahone@users.noreply.github.com>
* 📦Expose sdist manpage build deps unconditionally
Due to a bug in pypa/build, the `get_requires_for_build_sdist()` hook
is always invoked with `config_settings=None`. This means that we
cannot conditionally extend build requirements in said hook.
As a workaround, this patch makes hook pretend that `--built-manpages`
is always passed.
Ref: https://github.com/pypa/build/issues/559.
---------
Co-authored-by: Matt Davis <6775756+nitzmahone@users.noreply.github.com>
This patch creates a thin wrapper around the `setuptools`' PEP 517
build backend in-tree. It features an ability to request generating
the manpage files in the process of building a source distribution.
This toggle is implemented using the `config_settings` mechanism of
PEP 517.
One must explicitly pass it a CLI option to the build front-end to
trigger said behavior. The packagers are expected to use the
following call:
python -m build --config-setting=--build-manpages
This option has no effect on building wheels.
🧪 The change includes integration tests
This test runs building and re-building sdists and wheels with and
without the `--build-manpages` config setting under the
oldest-supported and new `setuptools` pinned.
It is intended to preserve the interoperability of the packaging setup
across Python runtimes.
An extra smoke test also verifies that non PEP 517 interfaces remain functional.
PR #79606
Co-authored-by: Matt Clay <matt@mystile.com>
Unofficial packaging should be maintained externally since
it is not tested in CI or used in the official release process.
Maintainers of unofficial packages are better equipped with the necessary
expertise and testing resources to support alternative packaging.
* Remove PyCrypto from setup.py and packaging script
* Remove mention of pycrpto from installation docs
* Remove PyCrypto from vault
* Remove pycryto constraint and unit test requirement
* Remove PyCrypto tests from unit tests
* Add docs and fix warning message
* Remove section about cryptography library in Ansible Vault docs
Change:
- Initial set of changes for renaming to ansible-core
- Includes changelog fragment changes from base -> core
- Does NOT include docs changes
- Modifies detection stuff in setup.py to support ansible<2.9 and ansible-base
Test Plan:
- ci_complete
Replace the ansible-base changelog linting and generation tool with antsibull-changelog and make it available for linting collections. Previously changelog linting was limited to ansible-base.
Change:
- Changes for ansible -> ansible base
- Bump to py3 for 2.10 PPA release
Test Plan:
- Local VM; Jenkins after merge.
Tickets:
- Refs #57342
Signed-off-by: Rick Elrod <rick@elrod.me>
Change:
- Nuke `make rpm` and friends from Makefile
- Nuke packaging/rpm
We are no longer going to be pushing RPMs to releases.ansible.com
post-2.10, so this is no longer necessary for us, and users should
prefer RPMs from their distro instead.
Test Plan:
Grepped the Makefile for all of: /rpm/i, /mock/i, /fedora/i
Tickets:
Refs #69539
Signed-off-by: Rick Elrod <rick@elrod.me>
* remove azure extras and extras_require support
* Since Azure will be collectionized, the requirements will float more frequently than Ansible releases; the Azure collection needs to host the requirements now.
* Removed the dynamic extras support as well, since Azure was the only thing using it. If we need it again, it's easy to pull back from history.
* Mark azure-requirements as orhpaned.
This keeps the docs around so that existing links from old test runs remain valid.
Co-authored-by: Matt Clay <matt@mystile.com>
On Ubuntu Precise and Trusty, the build was failing because the Ansible
libs were installed in /usr/lib/python2.7/site-packages.
According to the Debian Policy (2.5), they should actually be install in
/usr/lib/python2.7/dist-packages This is also CDBS default behaviour since
0.4.131.
See: https://www.debian.org/doc/packaging-manuals/python-policy/ch-python.htmlCloses: #64160
* Remove duplicate bundled provides line in the rpm spec file
* Remove jmespath and passlib on RHEL7 as these are optional dependencies
which aren't shipped with RHEL7
RPM builds on Fedora and RHEL create a python shebang line with -s
This is not good for ansible since ansible has a lot of optional
features which need extra dependencies installed. If the user installs
those extra dependencies to their home directory or to /usr/local then
the -s will keep them from being used.
- Generate an extra package for `ansible-test`.
- Manually install the files because CDBS get confused by our two
Python packages
- Refresh the package descriptions to match what is done with the RPM
Abhijeet Kasurde