- Add support for installing specific variants of a port.
- Add support for using yaml lists with 'name' parameter, rather than comma-separated lists.
- Add to and clarify documentation and examples.
- Use Macports nomenclature:
- s/package/port/g
- Rename update_cache to sync_ports but keep update_cache as an alias. Remove undocumented update-cache alias.
- Remove undocumented 'pkg' alias for 'name'. Replace with 'port' alias and document it.
- Print stdout and stderr output if `port sync` fails.
- Print stderr output, rather than stdout, if `port install/uninstall/activate/deactivate` fail.
* Resolve issues in NetApp E-Series Host module
The E-Series host module had some bugs relating to the update/creation
of host definitions when iSCSI initiators when included in the
configuration. This patch resolves this and other minor issues with
correctly detecting updates.
There were also several minor issues found that were causing issues with
truly idepotent updates/changes to the host definition.
This patch also provides some unit tests and integration tests to help
catch future issues in these areas.
fixes#28272
* Improve NetApp E-Series Host module testing
The NetApp E-Series Host module integration test lacked feature test
verification to verify the changes made to the storage array.
The NetApp E-Series rest api was used to verify host create, update, and
remove changes made to the NetApp E-Series storage arrays.
* Correct the default doc for attached in ec2_eni
Also corrected a typo in the summary
* Address ansible-test sanity error about E324
* Fix and remove the E325 suppression for ec2_eni
* Changed Foreman timeout to be setable via a parameter
Added a Parameter to set the timout to wait for the started Foreman actions
by the user instead of using the hard coded 1000 Seconds
* katello module screamed for more docu :)
* fix docu + some ci findings
made docu better and moved chices in relations to other options to the description
* added a quote to description and removed wrong combination of param product
* Removed choices from params
also removed katello from a ignore file
* Documentation change for resizefs
Changed documentation to match the default value of resizefs set in the code.
Added a note on the resizefs use on the example utilizing it.
* Remove test now it validates fine
* Update dnsimple-python minimum version to 1.0.0 as it supports API v2 and API v1 is deprecated.
* Update examples.
* Update documentation.
Fixes: #42495
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* The module now correctly sets the timezone in both the config file and
in /etc/localtime; while hwclock is set in both the config and
/etc/adjtime.
* Module checks if the timezone is actually set by checking
/etc/localtime. Before it only checked if it was set in the config file.
* Fixed module not setting the timezone on RedHat systems if
/etc/localtime was a symbolic link.
* Fixed module failures in case of missing config files or incorrect data
in them.
* Added a lot of integrations tests to cover most of these situations.
* cs_instance: implement host migration support
* fix build
* fail fast on update if user is not admin
* improve tests a bit
* expunge it
* fix typo
* disable temporarly verify for host on starting instance.
* fixing azure sanity tests
* fixing sanity
* fixing some tags issues
* removed unnecessary things from managed disk
* fixed location problem
* more sanity fixes
* sanity test fixes
* final sanity fixes?
* final fixes again
* undo changes related to container instance
* removed container instance
* readd again
* fixed stupid mistake
* removed _azure from changes
* one more mistake
* Set encrypted as default and fix empty password reporting changed
* Starting with Postgres 10 `UNENCRYPTED` passwords are removed and
because of that this module fails with the default `encrypted=no`.
Also encrypted passwords are suported since version 7.2
(https://www.postgresql.org/docs/7.2/static/sql-createuser.html) which
went EOL in 2007 and since 7.3 it is the default. Because of this it
makes a lot more sense to make `encrypted=yes` the default. This won't
break backward compatibility, the module would just update the user's
password in the DB in the hashed format and everything else will work
like before. It's also a security bad practice to store passwords in
plain text. fixes#25823
* There was also a bug with `encrypted=yes` and an empty password always
reported as changed.
* Improved documentation for `encrypted`/`password` parameters, and
removed some obsolete notes about passlib.
* Fix clearing user's password to work with all versions of Postgres
* Add tests for clearing the user password
* Fix documentation atfer rebase
* Add changelog fragment
* Modifying cnos-facts, cnos_command and cnos-config in line with the design followed in Ansible. Adding unit test cases for these modules. Added plugins to support them.
* Removing doc fragment conflicts with other modules
* Replacing show with display
* fix problem with documentation and param definition difference
* removed some E324 from ignore.txt
* fixed mistake
* remove one more E324
* removed function app
* fixing append tags
* leaving append tags for later
This PR includes:
- Fixes to the majority of module validation issues
(deliberate inconsistencies between docs and arg_spec)
- Removal of deprecated parameters 'method' and 'protocols'
- A few typos in the documentation
There are still some left-over validation errors, some are deliberate
(like doc strings as default to indicate ranges, etc.)
* Allow subspec defaults to be processed when the parent argument is not supplied
* Allow this to be configurable via apply_defaults on the parent
* Document attributes of arguments in argument_spec
* Switch manageiq_connection to use apply_defaults
* add choices to api_version in argument_spec
* vdirect modules: fix 'import' sanity test
* Remove passing file from import skip list.
* vdirect modules: fix validate-modules warnings
- Arguments with a default should not be marked as required
- add choices in doc
* vdirect_runnable: use formatting function
* a refactor of pool member and node modules to be inline with current f5 conventions
* Added priority_group_activation to pools
* various other small convention fixes and bug fixes
* Adds gnat provisioning to bigip_provision
* Adds special handling for AFM in bigip_provision
* Add device rebooting for provisioning as necessary
* Refactored route domain module to be inline with current f5 conventions
* Minor refactors across modules
* Use arg_spec type for comparisons on default and choices
* Further improve type casting
* Make sure to capture output in more places
* Individually report invalid choices
* Update ignore.txt after resolving merge conflicts
* Clean up Grafana docs a bit
But more is needed, default values, missing choices, proper
descriptions, actual sentences :-)
* Remove validate-modules entries
Remove module from ignore lists and some documentation fix in
digital_ocean_block_storage and digital_ocean module.
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Ensure we merge doc fragments early, for comparisons
* Perform boolean conversion from arg_spec data too
* Update valdiate-modules ignore.txt due to recent changes
Enforce module deprecation.
After module has reached the end of it's deprecation cycle we will replace it with a docs stub.
* Replace deprecated modules with docs-only sub
* Use of deprecated past deprecation cycle gives meaningful message (see examples below)
* Enforce documentation.deprecation dict via `schema.py`
* Update `ansible-doc` and web docs to display documentation.deprecation
* Document that structure in `dev_guide`
* Ensure that all modules starting with `_` have a `deprecation:` block
* Ensure `deprecation:` block is only used on modules that start with `_`
* `removed_in` A string which represents when this module needs **deleting**
* CHANGELOG.md and porting_guide_2.5.rst list removed modules as well as alternatives
* CHANGELOG.md links to porting guide index
To ensure that meaningful messages are given to the user if they try to use a module at the end of it's deprecation cycle we enforce the module to contain:
```python
if __name__ == '__main__':
removed_module()
```
* Skip parameters that are being deprecated
So in most cases when parameters are deprecated, you may not want to
advertise them in the documentation. One reason for this is because
these parameters were not introduced within Ansible but predate
upstreaming them.
So this change avoids reporting parameters that are not documented and
are deprecated. It's only a small subset of the existing E322 errors.
* Add support for E323 with these changes
* Unsure about the other issues now
* Add better error message with E321
* Restore some erroneously remove files
* Readd false positives to ignore.txt
* compare arg+aliases between docs and argument_spec
* Add some special handling for the network modules provider options that also appear in the top level arg spec
* Fix error code for bigip_hostname
* Address merge conflicts due to changes in f5 modules
* Update validate-modules ignore based off a clean execution
* Address merge conflicts
* Address renamed module
* Address recent changes to modules
* Add ignore for ucs_ip_pool
* Update aci modules to get more reliable documentation comparison, but not mutating the module_utils aci_argument_spec
* Update ignore.txt after recent aci updates
* Add extra guard to ensure we handle provider special only for network modules
* Address additional changes to modules
This patch is primarily a refactor to make the validate-modules arg-spec
no longer generate a traceback. It additionally includes removal of deprecated
code in the virtual server module.
The main patch is to remove the traceback generating code. There are
other small fixes that were made in addition to doing that.
* Removed re-def of cleanup_tokens.
* Changed parameter args to be keywords.
* Changed imports to include new module_util locations.
* Imports also include developing (sideband) module_util locations.
* Changed to using F5Client and plain AnsibleModule to prevent tracebacks caused by missing libraries.
* Removed init and update methods from most Parameter classes (optimization) as its now included in module_utils.
* Changed module and module param references to take into account the new self.module arg.
* Minor bug fixes made during this refactor.
The main purpose of this patch is to do the refactor that
supports replacing tracebacks with fail_json. Additionally, the
following was done.
* Removed re-def of cleanup_tokens.
* Changed parameter args to be keywords.
* Changed imports to include new module_util locations.
* Imports also include developing (sideband) module_util locations.
* Changed to using F5Client and plain AnsibleModule to prevent tracebacks caused by missing libraries.
* Removed init and update methods from most Parameter classes (optimization) as its now included in module_utils.
* Changed module and module param references to take into account the new self.module arg.
* Minor bug fixes made during this refactor.
Primarily, this patch contains refactors to remove tracebacks that
are generated when libraries are missing. There is also,
* Removed re-def of cleanup_tokens.
* Changed parameter args to be keywords.
* Changed imports to include new module_util locations.
* Imports also include developing (sideband) module_util locations.
* Changed to using F5Client and plain AnsibleModule to prevent tracebacks caused by missing libraries.
* Removed init and update methods from most Parameter classes (optimization) as its now included in module_utils.
* Changed module and module param references to take into account the new self.module arg. Minor bug fixes made during this refactor.
This patch was primarily an effort to reduce traceback errors for
work that sivel was doing. Part of (and in some cases in addition to)
that, the following was done.
* Removed re-def of cleanup_tokens.
* Changed parameter args to be keywords.
* Changed imports to include new module_util locations.
* Imports also include developing (sideband) module_util locations.
* Changed to using F5Client and plain AnsibleModule to prevent tracebacks caused by missing libraries.
* Removed init and update methods from most Parameter classes (optimization) as its now included in module_utils.
* Changed module and module param references to take into account the new self.module arg.
* Minor bug fixes made during this refactor.
* Update validate-modules arg_spec introspection to be faster, by only mocking the imports we explicitly list
* The use of types.MethodType in redhat_subscription wasn't py3 compatible, use partial instead
* Remove argument_spec import hacks, make them errors, we can ignore them with ansible-test
* Enable the --arg-spec flag for validate-modules
Matt Martz