* Adding Support For EVPN in BGP Module
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Pep8 Failures in onyx_bgp.py
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Pep8 Failures in onyx_bgp.py Phase 2
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Samer's Comments
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Remove file Variable
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Adding Support for NVE Protocol in onyx_protocol
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Pep8 Failures in onyx_protocol.py
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Adding Support for Traffic Class in Onyx Switches
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Enhancing the code and elemenating code duplicate
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* nxos_vpc:Fix idempotency issues with multiple attributes
Several attributes were causing idempotency problems on various platforms:
- `auto_recovery`
- This command can be disabled on certain platforms and will nvgen as `no auto-recovery`
- When enabled it has an additional optional-keyword for changing the `reload-delay` timer value
- This was addressed by adding a new attribute `auto_recovery_reload_delay` to handle setting the timer value
- This new attribute is mutually exclusive with `auto_recovery`
- `/show run vpc/show run vpc all/`
- Changed the command that gets state to `all` so that it could differentiate between `auto-recovery` and `auto-recovery reload-delay`
- This change resulted in also changing some attribute handling withing `get_vpc`, since some attributes like `peer_gw` relied on presence of the config to determine state true or false. With `all` the config is always there so these attrs must specifically check for `'no '` in the string.
- `delay_restore`
- This command has two additional, optional keywords that exist on some platforms and not others.
- New attrs:
- `delay_restore_interface_vlan`
- `delay_restore_orphan_port`
- Modified the `sanity` test to include the new attributes and to fix the platform issues.
- Bugfix Pull Request
`modules/network/nxos/nxos_vpc.py`
- Validated `nxos_vpc` `sanity` test on these platforms, all are now 100% Pass: N35, N3K, N3K-F, N6K, N7K, N9K, N9K-F
- TBD: Future work is needed to add support for `peer_gw_exclude_gw` timers. This could be addressed in the same way as the `auto_recovery_reload_delay` changes included here.
* lint fix
* Add 'version_added' tags for new options
* nxos_snmp_user: platform fixes for get_snmp_user
snmp user output behavior varies quite a bit for the different nxos platforms and required several workarounds:
- N5K/N6k
- These platforms do not support structured output for `show snmp user`.
- The current code lands in an `except` clause when the output is not structured; so I added a new `get_non_structured_snmp_user` method to scrape the state from the regular cli output if it's present.
- N9K-F
- The `group` data in the JSON output is different for this platform; it has a different key (just `group` instead of `TABLE_groups` or `group_names`) and it is not indexed
- For a single group the value is a string, for multiple groups it's a list
- sanity
- N5K/N6K/N9K-F platforms will reject `no snmp user <name> <role>` when it's the last role defined for the user.
- workaround is to use `nxos_user` to remove the user
- Changes validated on:
- `N3K, N3K-F, N35, N6K, N7K, N9K, N9K-F`
- `6.0(2)A8`
- `7.0(3)I2, 7.0(3)I4, 7.0(3)I5, 7.0(3)I6, 7.0(3)I7`
- `7.3(2)D1`
- `7.3(3)N1, 7.3(4)N1`
- `8.3(2)`
- `9.2(2), 9.2(3)`
* fix lint warning
* use navigate_value instead navigate_hash
* add async wait method
* update dict compare
* remove unuse methods
* not all modules have timeouts parameter
* navigate_value, the input data may be None
* Same api client can be used for other service as well
* Incorporated Review comments. Modified Category and Guest Fact modules which are also dependent on vmware_rest_client module util
* Adding Integration Tests for vmware_rest_client changes
* Changes to incroporate changes in vcsim testware
* Change to get vm name to attach the tag
* Alter tests to pass
* Change diff_against to make changed work again
* Add another diff_against
* Expose supports_sessions across all EOS connection types
* Change session warning to failure
* supports_sessions needs to be a method to survive the rpc boundary
* Alter tests to match
It is possible the EOS appliance doesn't have an IP address on the
management1 interface, instead just check we have found that interface.
Signed-off-by: Paul Belanger <pabelanger@redhat.com>
* sysctl will now return an error if the value is invalid
sysctl can fail to set a value even if it returns an exit status 0. More
details: https://bugzilla.redhat.com/show_bug.cgi?id=1264080. Because of
this in case of an invalid value or a read-only file system, sysctl
module would return OK, even though it didn't set anything. To be sure
that sysctl correctly applied the changes we also need to check the
output of stderr.
* Run sysctl with LANG=C
Because we are parsing sysctl stderr we need to make sure that errors
are persistent across different system language settings.
* Add changelog fragment for sysctl
- Created `sanity.yaml` to contain all of the tests previously kept in separate files
- Removed `cli` and `nxapi` test directories
- Tested on current supported platforms and versions: `N3K,N6K,N7K,N9K,N3K-F,N9K-F`
* remove deprecated get_md5 from stat
fixes#55309
* removed get_md5 from tests involving stat
* keep get_md5 but hide it
* rst it
* ammended comment
* ws
* added ignore for hidden md5
* Make ansible adhoc work with include_role
Fix logic condition so that include_role works
without
```
ERROR! 'async_val' is not a valid attribute for a IncludeRole
The error appears to be in 'None': line 0, column 0, but may
be elsewhere in the file depending on the exact syntax problem.
(could not open file to display line)
```
* Add include_role test for adhoc
* remove external grep call and parse with python
* use function for repeated code
* use module.get_bin_path() for iscsiutil on HPUX
* some code opt for HPUX
* clean up non-module code, module being defined is a requirement for this code
* import get_bin_path() directly and use without module prefix
* Add integration tests for AIX and HP-UX
* add changelog fragment
* Apply suggestions from code review
Co-Authored-By: mator <matorola@gmail.com>
* Apply suggestions from code review #2
Co-Authored-By: Sam Doran <sdoran@redhat.com>
* Remove strict requirement on executable to exist for get_bin_path() as
it will allow facts gathering to continue without an error. Almost all
other files under facts do not have "required=True" (except 2 files,
which should be probably fixed). And check return value for
get_bin_path() , before run attempt.
* add check for AIX lsattr run_command return code
* nxos_snmp_traps: fix 'group: all' for N35 platforms
- `group: all` attempts to enable traps for all features defined in the module's `feature_list`
- `N35` platforms do not support `snmp-server enable traps bfd`; so removing `bfd` from the `feature_list` for that platform
- Minor cleanup in `sanity.yaml` test file
* whitespace lint fix
* Fixes Netconf_config single parameter bug
Fixes 56022
fixed get_config to not require multiple parameters to just run a backup
* Add Integration test for netconf_config
Associated with #56022
tests backup through netconf only using one parameter.
* Added debug to the begin and end of file
* Fix formatting of save config. #56022
* removed blank line at end: #56022
* add vmware_evc_mode module
* alter result message for absent/absent
* Apply suggestions from code review
Co-Authored-By: CastawayEGR <36353334+CastawayEGR@users.noreply.github.com>
* add idempotency test
* change result dict to evc_mode_msg
* refactor to use pyvmomi class
* fix update to only process task on update
* minimize update code
* add single quotes around vars to match other code
* pass datacenter to cluster find
* add check_mode to disable test
This gives us a little more structure to our console logs, which make it
easier for machines / humans to parse. It will be helpful once the
ansible network team starts importing this data into elastic-recheck.
Signed-off-by: Paul Belanger <pabelanger@redhat.com>
This has been broken for some time, but only noticed recently. Because
vyos_command isn't supported on ansible_connection=local, update our
testing to account for that.
Signed-off-by: Paul Belanger <pabelanger@redhat.com>
Otherwise, we get the following error:
ERROR: ncclient 0.6.4 requires selectors2>=2.0.1, which is not installed.
when running ansible-test.
Signed-off-by: Paul Belanger <pabelanger@redhat.com>
Refactoring of the following roles to make use of the new
`prepare_vmware_tests` role.
- `vmware_resource_pool`
- `vmware_resource_pool_facts`
- `vmware_target_canonical_facts`
- `vmware_vcenter_settings`
- `vmware_vcenter_statistics`
- `vmware_vm_facts`
- `vmware_vm_host_drs_rule`
- `vmware_vm_vm_drs_rule`
- `vmware_vmkernel`
- `vmware_vmkernel_facts`
- `vmware_vspan_session`
- `vmware_vswitch`
- `vmware_vswitch_facts`
This patch depends on: https://github.com/ansible/ansible/pull/55719
Original PR: https://github.com/ansible/ansible/pull/54882
* Fix loading namespaced doc_fragments
The syntax for specifying a different fragment name was already
using '.' as a separator, so the code needed to be tweaked to
avoid choking on names like `testns.testcoll.fragname` and
`testns.testcoll.fragname.altvar`.
`get_plugin_class()` returns 'docfragment' for the fragment loader;
mangling `subdir` provides consistent alignment with the normal plugin
directory names and avoids needing special handling of plugin types
with 'module' in the name.
* Add changelog entry
Refactoring of the following roles to make use of the new
`prepare_vmware_tests` role.
- `vmware_drs_group`
- `vmware_drs_group_facts`
- `vmware_drs_rule_facts`
- `vmware_drs_portgroup`
- `vmware_drs_portgroup_facts`
- `vmware_dvs_portgroup_facts`
- `vmware_dvswitch`
- `vmware_dvswitch_pvlans`
This patch depends on: https://github.com/ansible/ansible/pull/55719
Original PR: https://github.com/ansible/ansible/pull/54882
Refactoring of the following roles to make use of the new
`prepare_vmware_tests` role.
- `vmware_inventory`
- `vmware_local_role_facts`
- `vmware_local_role_manager`
- `vmware_local_user_facts`
- `vmware_local_user_manager`
- `vmware_maintenancemode`
- `vmware_portgroup_facts`
- `vmware_resource_pool`
- `vmware_resource_pool_facts`
This patch depends on: https://github.com/ansible/ansible/pull/55719
Original PR: https://github.com/ansible/ansible/pull/54882
* `nxos_acl` may fail with `IndexError: list index out of range` while attempting to delete a non-existent ACL.
The failure occurs when the `acl` var is an empty list.
* nxos_acl: catch 501 'Structured output unsupported' when no ACLs present
With some older image versions, `show ip access-list | json` will raise a 501 error indicating `'Structured output unsupported'` when there are no access-lists configured. This change turns off the `check_rc` and then looks for the failure condition.
* Fix kwarg
* Fix lint issues
* Implement a framework for having common code for release scripts
* Release scripts will go through hacking/build-ansible. build-ansible is
a pluggable script which will set a directory that has common code for
non-enduser scripts. It will then invoke the plugin which implements
that subcommand. Uses straight.plugin for loading each sub-command.
* We're going to add tools which are needed to test ansible (the changelog
generation, for instance) so we need to include the pieces relevant to
that in the tarball.
* Add straight.plugin to the sanity test requirements for the same
reason
* Skip compile test just for build-ansible plugins which won't be run as
part of sanity tests.
Refactoring of the following roles to make use of the new
`prepare_vmware_tests` role.
- `vmware_guest`
- `vmware_guest_boot_facts`
- `vmware_guest_custom_attribute_defs`
- `vmware_guest_customization_facts`
- `vmware_guest_disk_facts`
- `vmware_guest_facts`
- `vmware_guest_find`
- `vmware_guest_move`
- `vmware_guest_powerstate`
- `vmware_guest_snapshot`
- `vmware_guest_snapshot_facts`
- `vmware_guest_tools_wait`
This patch depends on: https://github.com/ansible/ansible/pull/55719
Original PR: https://github.com/ansible/ansible/pull/54882
A couple sanity tests require the packaging module. The azure tests are
dragging it in but list it explicitly in sanity so we don't run into
problems if those are ever split up
* add multi-node manipulation, delete on xpath match only and count capability to win_xml
* fix pep8 and yamllint errors identified by ci tests
* fixed bugs when handling multiple elements, multiple attribute nodes and handling for attribute nodes when using xpaths that only select attributes like //@lang. Added more tests and tweaked documentation.
* fixed line-too-long error
* fixed trailing space errors
* trailing whitespace expunged
* bump version_added to 2.9 for new changes
* fix PSAvoidUsingPositionalParameters sanity check failure
* refix sanity check as it broke the msg return value
* Check variables are defined before using combine filter
* Add tests for the combine filter
* Remove dependencies that should already be installed
* relocate the function to recursively check for undefined vars
add another test
* changelog
This does not fix the tests themselves, only the syntax (converting from playbooks to roles).
The aix_devices test fails due to use of unsupported state values.
* Add custom action class for version info
* Use args from CLI as prog for ArgumentParser object
* Make prog a required parameter of create_base_parser() and update all uses to pass in the newly required parameter.
* Add unit test for checking ansible --version
* Update other related unit tests
* Remove unnecessary delegate_to in tests.
* Remove incorrect delegate_to in tests.
* Remove unnecessary use of local_action in tests.
* Remove incorrect use of local_action in tests.
* Remove unnecessary use of local_action in tests.
* Remove incorrect use of local_action in tests.
* Remove unnecessary use of local_action in tests.
* Use delegate_to instead of local_action in tests.
* Use setup_remote_tmp_dir instead of TMPDIR.
* Support using importlib on py>=3 to avoid imp deprecation
* Add changelog fragment
* importlib coverage for py3
* Ansiballz execute should use importlib too
* recursive module_utils finder should utilize importlib too
* don't be dumb
* Fix up units
* Clean up tests
* Prefer importlib.util in plugin loader when available
* insert the module into sys.modules
* 3 before 2 for consistency
* ci_complete
* Address importlib.util.find_spec returning None
The vmware test roles do a lot of similar operation to prepare
the environment. This role will be used to reduce the amount of
duplicated code.
The role can prepare an environment on a baremetal environment, this
in addition to vcsim.
Original PR: https://github.com/ansible/ansible/pull/54882
* nxos_ospf_vrf:sanity: ignore no default-metric idempotence tests when I7 images
This is a sanity test cleanup to handle a known image bug with (N9K) I7 images.
The I7 image rejects 'no default-metric' configs, so we're skipping the idempotence
tests that involve this bug.
Tested on N9K images: 9.2(2), 7.0(3)I7, 7.0(3)I2
* simplify check for I7
This is a sanity test cleanup to handle a known image bug with (N9K) I7 images.
The I7 image fails to enable some snmp trap link configs causing an idempotency failure in the sanity, so we're skipping the idempotence tests that involve this bug.
Tested on N9K images: 9.2(2), 7.0(3)I7.
* Start of migration to argparse
* various fixes and improvements
* Linting fixes
* Test fixes
* Fix vault_password_files
* Add PrependAction for argparse
* A bunch of additional tweak/fixes
* Fix ansible-config tests
* Fix man page generation
* linting fix
* More adhoc pattern fixes
* Add changelog fragment
* Add support for argcomplete
* Enable argcomplete global completion
* Rename PrependAction to PrependListAction to better describe what it does
* Add documentation for installing and configuring argcomplete
* Address rebase issues
* Fix display encoding for vault
* Fix line length
* Address rebase issues
* Handle rebase issues
* Use mutually exclusive group instead of handling manually
* Fix rebase issues
* Address rebase issue
* Update version added for argcomplete support
* -e must be given a value
* ci_complete
-Add: Test cases for ansible_parent_role_names and ansible_parent_role_paths
-Add: ansible_parent_role_names/paths variables for when a role is being included by another role.
Ensure inventory plugin loading rel to play
fixes#51033
* clarify paths
* now adding dirs funciton in loader
* better warnings
* each cli should handle adding dirs depending on context
* Use module_utils.compat.ipaddress where possible.
* Simplify reverse pointer computation.
* Use dummy for unused variables.
* Remove from ignore list.
* Adjust fix.
* Fix text handling for Python 2.
* Add changelog.
* - initial commit for the modules and tests
* initial implementation based on ec2_asg
* docstring implemtation and further methods initial implementation
* refactoring and pylint changes
* further implementation and integration tests
* added examples and parameter documentation
* removed files that were essentially templates
* added waiter for delete and updated the tests
* removed unit test
* fixed pep8 failure
* fixed pep8 failure
* fixed pep8 password field issue
* fixed pep8 password field issue
* fixed syntax issues
* fixed pep8 defaults
* password property documentation was breaking yaml
* fixed pep8 defaults
* fixed lack of defaults for wait parameter
* added default to boolean parameter
* pep8 fix
* fixed author entry
* adding type to wait parameter
* adding type to wait parameter
* fixed linting issues
* updated description and removed default from docs
* added metaclass
changed default for boolean
* changed declared defaults
* - fixe the delete function
- solved the yaml syntax issue
* added missing defaults for timeout, retry and removed the one for endpointtype as it should be None, becasue parameter is Required anyway
* fixed RETURN documentation issue
* trying to fix the import placement error
* trying to fix the doc error for missing params
* pep8 issues
* added endpoint aliases
* - added documentation
* pep8
* changed to unsupported tag
* changed no_log fact to yes in the integration tests
* added suggested changes to the integration tests
* - making severname use resource_prefix as well as a more generic domain
- removing test fact
* General test improvements.
* Adjust tests to older docker-py versions.
* docker_swarm_server_info: work around problems with older docker-py versions
* Bump minimal docker-py version for options network_filters and disk_usage.
* More general test improvements.
* Correct usage of docker_image.
* Put files into output directory.
* Speed up test.
* Remove old check.
* Add test for generating a CSR with everything, and testing idempotency.
* Proper SAN normalization before comparison.
* Fix check in cryptography backend.
* Convert SANs to text. Update comments.
* Add changelog.
* Warn when log_options values are not strings.
* Add changelog.
* Improve message.
* Improve formatting and formulation of other messages.
* Add test for warning.
* Trying double escaping.
* Remove code but leave the metadata so that they can be listed as
removed in documentation.
* Remove removed modules from validate-modules ignore
* Remove unittests for the removed nodules
* Remove links to removed modules and add list of removed moduels to the
2.9 porting guide
* become mixin is no more
since sudo/su keywords are removed in 2.9 .. no need to keep this code around
* also don't need test for code that is removed
* made preprocess_data on base noop
its not used by anything anymore, but kept for backwards compat since other methods of same name are used
* AWS: add ec2_transit_gateway_info module
* move info module test to main module and ensure unique description for parallel tests
* add type designators to module options in documentation
* assign results and return instead of exit. Add elements directive available with ansible 2.8
* assign results and return instead of exit
* get() method superfluous for module.params
* correct return type in documentation for ASN and format the sample for Tag correctly
* added random uid to test description - removing unstable alias
* change random uuid to resource_prefix to improve source of object identification in testing
* postgresql_idx: improve doc
* postgresql_idx: improve doc, removed unuseless rows from code
* postgresql_idx: misc doc fix
* postgresql_idx: moved common params where they were
* postgresql_idx: moved common params where they were 2
* Adding Support For Vxlan In Onyx Switches
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Pep8 Failures in onyx_vxlan.py
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Pep8 Failures in onyx_vxlan phase 2
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Shippable failures
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Samer's Comments on PR
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Add docker_swarm_service_info module
* Remove unused import
* Limit to retrieving info about one service
* Add exists return value
* Add yaml 3-dash
Co-Authored-By: hannseman <hannes@5monkeys.se>
* Document return value as jinja `none´
Co-Authored-By: hannseman <hannes@5monkeys.se>
* Name is required
* module_utils fixes in collections
* fixed Windows module_utils in collections
* fixed more Python module_utils cases (from X import module)
* "medium style" Ansiballz modules now work properly with collections (ie, non-replacer but also not using basic.py)
* added more tests
* split Windows/POSIX exec
* sanity
* Adding New Model for Configure Buffer Pool on Onyx Switches
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix Pep8 Failures in onyx_buffer_pool.py
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Add podman_image and podman_image_info modules
* Add integration test for podman_image_info
* Change parameter names per feedback
* Add integration tests for podman_image
* Make test-module use default value for interpreter
* Changing from static interpreter path to sys.executable as per #54053
* A little ntegration test for #54053
* Added idempotency logic to openssl_pkcs12
Also decoupled the 'parse' and 'generate' function from the file write
as they are now used in different places that do not need the file to be
written to disk.
* Added idempotency tests for openssl_pkcs12
Also adds a new test for pkcs12 files with multiple certificates
* Regenerate if parsed file is invalid
* pkcs12_other_certificates check was wrong
* Updated ca_certificates to other_certificates
ca_certificates is left as an alias to other_certificates;
friendlyname depends on private key, so it will be ignored while
checking for idempotency if the pkey is not set;
idempotency check only checks for correct certs in the stack
* use different keys for different certs
* Added other_certificates in module docs
* Added changelog and porting guide
* removed unrelated porting guide entry
* renamed ca_cert* occurrence with other_cert
Check allows vmware_dvs_portgroup to fail early if user
specified invalid range in VLAN id(s).
Fixes: #54927
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* win_firewall_rule only changes specified arguments
defaults are controlled by com object
integration test for built in rule
* removed ignore psaliases for win_firewall_rule
* direction and action are no longer required
program and service respect default values
documentation updated to reflect that defaults apply to rule creation
added test to disable a rule and verify other values have not changed
* fixed extra whitespace
* Move each description sentance to a new entry
This reverts commit 85d836171b.
As discussed in WWG IRC meeting, we don't want Get-ADObject to be a dependency of win_domain_membership, and we need to be able to authenticate to the DC in some configs. We can revisit this change a different way for 2.9.
* Use six from ansible.module_utils for inventory scripts
Remove skips from sanity test
* Change all imports of ConfigParser to use module_utils.six.moves
* Remove commented out lines
* Fix six imports
* Don't pollute include_variables. Fixes#51667. Fixes#54618.
* Rename include_variables to include_args, so we can make the distinction about what they are
* Track args and vars separately
* oops
* oops again
* linting fix
* Add test
- Fixed issue #25017,#37567
- Add example for prompt on launch
- Add integration test for prompt on launch
Signed-off-by: Hideki Saito <saito@fgrep.org>
* updated tests and changelog for 54516
* Handle errors if PG does not support partitioning.
* Check for PG > 10 in tasks
* Show changes for partitioned tables in ansible
* Added documentation in the tests
* Update test/integration/targets/postgresql/tasks/postgresql_privs.yml
Co-Authored-By: raymondroelands <raymondroelands@users.noreply.github.com>
* Update test/integration/targets/postgresql/tasks/postgresql_privs.yml
Co-Authored-By: raymondroelands <raymondroelands@users.noreply.github.com>
* Added check for 0 tables after revoking rights
* Added test and moved tests
Added check mode test and moved test right after the change.
* Rebased postgresql_privs.py
* Add win_format
* Some doc changes were missed
* Fixes for ansible-test, additional assertion for check mode
* Fix -WhatIf issues
* Support for idempotency and changes to integration tests
* Fix trailing whitespace
* Fixes from review, and added check for non-empty volumes
* Remove an extra line
* Structural changes
* Minor fixes for CI
Remove test comparing output to platform.linux_distribution() since we are relying on distro.id() and are not concerned about matching the output of platform.linux_distribution()
* Correct behavior so that direction isn't required for default.
* Add more tests.
* 'disabled' values cannot be changed.
* Include 'not specified' in messages.
* netbox_device: Allow device modification
* Add ability to update and existing device
* Allow check_mode
* Fail when device name is missing
* Fail when cannot resolve ID instead of taking ID 1 by default
* netbox_device: Add diff output
* netbox: Some refactoring
* Add diff output and check_mode to netbox_ip_address
* Deduplicate redundant code into netbox_utils
* netbox_utils: A few unit tests
* Update the default test container to 1.7.0.
* Run `pip check` after installing test requirements.
* Support older versions of pip.
* Remove obsolete pip error handler.
* fix missing attribs with dirct module execution
* also make remote tmp handling smarter
update tests
* set default if attrib does not exist
* add simple test
* Remove default use of paramiko connection plugin on macOS
This fix was originally to work around a bug that caused a kernel panic on macOS
that has since been fixed.
* Remove paramiko from requirements.txt
* Move paramiko checking to common place
* Drop the warnings obfiscation code
* Update pip installation instructions to reflect upstream instructions
* Fix tests on CentOS 6 (Python 2.6) that now show Python deprecation warnings
* Add changelog fragment
* add asa_og module
* add test
* fix pep8
* fix some sanity pylint
* fix import error order
* fix import
* replace cmd() method
* rename file and class
* add mock for connection
* fix commands in replace test function
* fix lines list
* update unit test
* fix 'and' logic for port-object command
* restore previous unit test; fix pep8 and remove debug
* other unit tests
* Add state present, absent, replace
* Update doc; add default for state
* update unit test with state present/absent
* fix typo in unit test
* fix pep8 too many blank lines
* fix show run for service object ASA Ver 8.x
* Add description field; fix bug for state present and absent
* Re-designed module structure for network, service and port objects
* update integration test for new module structure
* fix pep8
* update EXAMPLES and RETURN
* update units tests
* fix module typos in unit test
* removed provider from examples
* fix missing comma in replace test
* fix module name and remove provider
* update license
* remove register; update license; change import order; chage def state
* remove shebang
* fix doc default state
* change import order
* Update year in banner
* fix integration test as set of tasks
* remove arg_spec
* remove extends_documentation_fragment: asa
* Update DOC, remove unused import, change import order
The controller's fixup_perms2 uses filesystem acls to make the temporary
file for copy readable by an unprivileged become user. On Python3, the
acls are then copied to the destination filename so we have to remove
them from there.
We can't remove them prior to the copy because we may not have
permission to read the file if the acls are not present. We can't
remove them in atomic_move() because the move function shouldn't know
anything about controller features. We may want to generalize this into
a helper function, though.
Fixes#44412
Co-authored-by: Toshio Kuratomi <a.badger@gmail.com>
* Add latest updates from FTD Ansible downstream repository.
- add a better implementation of the upsert operation;
- add API version lookup functionality;
- add filter which remove duplicated references from the list of references;
- fix minor bugs.
* fix issues outlined by ansibot
* fix argument name for _check_enum_method
* Return UnlockKey
* Add changelog fragment
* Add method to check if a parameter exists in diffs
* Add method to get swarm unlock key
* Add option unlock_key
* Only return unlock key when created or changed
* Rename difference check
* Extend unlock key example
* Assert that unlock_key is a string
* Fix docker_swarm_info authors
* Don’t silence APIErrors
* Test unlock_key on unlocked swarm
* Catch APIError when retrieving unlock key
* Better return value description
* Lint
* Fix UnlockKey return value documentation
Co-Authored-By: hannseman <hannes@5monkeys.se>
* Get unlock key safely
Co-Authored-By: hannseman <hannes@5monkeys.se>
* Return None on empty UnlockKey
* Assert swarm_unlock_key is undefined if unqueried
* Add documentation about swarm_info unlock_key
* Add change log fragment for unlock_key option
* Revert "Add change log fragment for unlock_key option"
This reverts commit e3cb2325b5.
* Use generator expression instead
* Restart docker more decisively
* Use systemctl kill
Co-Authored-By: hannseman <hannes@5monkeys.se>
* Try to restart docker daemon
* [openssh_cert] cleanup the returned certificate info
- Drop the certificate path - it is already present in rc.filename.
- Drop the leading whitespace for all lines.
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* [openssh_cert] add support for a certificate serial number
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* [openssh_cert] fix lint error
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* [openssh_cert] drop explicit default value
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* [openssh_cert] enforce the specified or missing serial number
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* [openssh_cert] passing no explicit serial number ignores any present one
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* cloudstack: remove choice list for hypervisor param
* cloudstack: streamline network_type with returned value by the API
* cloudstack: remove E326
* add changelog fragment
* Add win_hosts module
added win_hosts module for easier manipulation of hosts entries in "%windir%\system32\drivers\etc\hosts" for windows systems
* Update win_hosts.py
* Add alias support to win_hosts module (#1)
* win_hosts supports aliases
added support for adding / removing aliases from a host entry, rather than adding a new entry
added ability for win_hosts to detect aliases:
`192.168.1.1 alias1 alias2 alias3`
```
win_hosts:
host_name: alias2
ip_address: 192.168.1.1
```
will result in `192.168.1.1 alias1 alias3`
also includes `replace` and `add` as options for `ip_action` (`replace` is default)
for example:
```
192.168.1.1 my_reused_alias
192.168.1.2 my_reused_alias
```
with
```
win_hosts:
host_name: my_reused_alias
ip_address: 192.168.1.3
ip_action: add
```
the result will be
```
192.168.1.1 my_reused_alias
192.168.1.2 my_reused_alias
```
but with `ip_action=replace` the result would be
```
192.168.1.3 my_reused_alias
```
* fixed metadata version and version added
* fix line endings
* upload fixed line endings
try to upload the file with the fixed line endings
* aliases and canonical names are separate entities. added IPv4 and IPv6 validation
* only makes changes if "check_mode" is false
* improved behavior for duplicate aliases/entries.
* adding tests
* missing aliases file
* fix trailing whitespace and uses explicit paths
* Tweak tests to copy and restore original hosts file
* win_nssm: rename cmdlets to use approved verbs, rename service name parameters
* win_nssm: improve code style and cmdlets ordering
* win_nssm: always escape all command line parameters with Argv-ToString
fix error when the service name contains quotes
* win_nssm: use Fail-Json instead of exceptions and remove global try/catch
* win_nssm: small refactoring, inline some functions
* win_nssm: refactoring - add a generic cmdlet to idempotently set any nssm service parameter
* win_nssm: refactoring - inline some functions
To make the code more malleable for future changes
* win_nssm: change application, stdout_file and stderr_file options type to path
* win_nssm: deprecates app_parameters, rename app_parameters_free_form to arguments, and add support for list of parameters
* win_nssm: add support of check mode
* win_nssm: add working_directory option
* win_nssm: add display_name and description options
* win_nssm: minor changes
* win_nssm: remove some sanity exclusions
* win_nssm: avoid using aliases and minor style fixes
* win_nssm: doc and ui improvements
* win_nssm: remove sanity exclusions
* win_nssm: minor revision
* win_nssm: deprecates dependencies, start_mode, user and password parameters and some choices of state in favor of win_service
* win_nssm: fix style
* win_nssm: add executable option to specify the location of the NSSM utility
* win_nssm: add missing parameter types
* win_nssm: add diff mode support
* win_nssm: avoid displaying depreciation warning if default value is assigned
* win_nssm: fix variable scope
* win_nssm: use the explicit -LiteralPath parameter name instead of -Path
* win_nssm: fix documentation
* win_nssm: add porting guide entries
* win_nssm: add changelog fragment
* Enable ec2_transit_gateway test in CI.
* Mark the test unstable.
The test sometimes attempts to delete the transit gateway while it
is in the pending state, which is not permitted.
* Fix wrong example, remove strictness and fix tests
It was obvious that (because of an incorrect example) people were using
the **xml** module incorrectly, specifying the `attribute` parameter
where it was not supported (i.e. ignored).
While this functionality would have been useful, it currently returns as
if the information was requested from the parent, so we cannot simply
make it to what would be expected.
Therefor the real solution is to provide a warning when we find
incorrect use, and deprecate this use. Then later we could implement
this functionality correctly.
While troubleshooting this issue, I found that in some cases our
integration tests were not being run when we expected it.
This fixes#53459
* Change warning
* Fix weird sanity test error
* Add a comment to the deprecate-test
* Initial commit for static route module
- Create and query functionality in place today
* Enabled querying both all routes and single route
* Bug fixes and idempotency check
- Requires new idempotency code to validate, blocking on that
* Enabled test cases
* Documentation fixes
* Whitespace fix
* Major improvements based on Dag's commments
- Improved documentation and examples
- Fixed fixed IP assignments and reserved range parameters
- Improved integration tests
- Made check mode work
* Rename str to string in documentation
* Move back to str
* Fix indentation
* Fix documentation for example of fixed_ip_assignments
- Removed default=None for args
* Add support for notes
* Add test for notes
* Device notes changes
- Renamed from notes to note
- Modified tests to work
* Comment device test since it only works once
* Remove assertion stanza and move assertion to existing one
* Add version_added to note documentation
* Converted from tabs to spaces
* Added changelog fragment
* Remove changelog file since it's a feature
* Add changelog fragment
* basic plugin loading working (with many hacks)
* task collections working
* play/block-level collection module/action working
* implement PEP302 loader
* implicit package support (no need for __init.py__ in collections)
* provides future options for secure loading of content that shouldn't execute inside controller (eg, actively ignore __init__.py on content/module paths)
* provide hook for synthetic collection setup (eg ansible.core pseudo-collection for specifying built-in plugins without legacy path, etc)
* synthetic package support
* ansible.core.plugins mapping works, others don't
* synthetic collections working for modules/actions
* fix direct-load legacy
* change base package name to ansible_collections
* note
* collection role loading
* expand paths from installed content root vars
* feature complete?
* rename ansible.core to ansible.builtin
* and various sanity fixes
* sanity tweaks
* unittest fixes
* less grabby error handler on has_plugin
* probably need to replace with a or harden callers
* fix win_ping test
* disable module test with explicit file extension; might be able to support in some scenarios, but can't see any other tests that verify that behavior...
* fix unicode conversion issues on py2
* attempt to keep things working-ish on py2.6
* python2.6 test fun round 2
* rename dirs/configs to "collections"
* add wrapper dir for content-adjacent
* fix pythoncheck to use localhost
* unicode tweaks, native/bytes string prefixing
* rename COLLECTION_PATHS to COLLECTIONS_PATHS
* switch to pathspec
* path handling cleanup
* change expensive `all` back to or chain
* unused import cleanup
* quotes tweak
* use wrapped iter/len in Jinja proxy
* var name expansion
* comment seemingly overcomplicated playbook_paths resolution
* drop unnecessary conditional nesting
* eliminate extraneous local
* zap superfluous validation function
* use slice for rolespec NS assembly
* misc naming/unicode fixes
* collection callback loader asks if valid FQ name instead of just '.'
* switch collection role resolution behavior to be internally `text` as much as possible
* misc fixmes
* to_native in exception constructor
* (slightly) detangle tuple accumulation mess in module_utils __init__ walker
* more misc fixmes
* tighten up action dispatch, add unqualified action test
* rename Collection mixin to CollectionSearch
* (attempt to) avoid potential confusion/conflict with builtin collections, etc
* stale fixmes
* tighten up pluginloader collections determination
* sanity test fixes
* ditch regex escape
* clarify comment
* update default collections paths config entry
* use PATH format instead of list
* skip integration tests on Python 2.6
ci_complete
Currently, if we try to stop or start a network two time in a row, the
second call will fail. With this patch:
- we don't recreate a network, if it exists
- we only stop a network if it's active, and so we avoid an exception
saying the network is not active
* test: mock libvirt
* add integration tests for virt_net
* test: enable virt_net test on RedHat 7 and 8
* ci: use the unsupported alias
* tests that require privileged mode are run in VM
* virt_net/create raise unexpected libvirt exception
* import mock from units.compat
* virt_net: do not call create() on "active" network
* virt_net func test: only clean up the libvirt packages
* test: virt_net: don't use assert_called()
* virt_net: add the destructive alias
* move the test in virt_net dir
* test/virt_net: clean up the network at the end
* Add a force_replace_host flag to win_domain_membership
Satisfies https://github.com/ansible/ansible/issues/53539
* Rework backticks
* Bump version_added
* Check for existence of current hostname as well; use LDAPFilter during search
* Rename $force_replace_host to $allow_existing_computer_account
* Added docs, porting guide and minor nit in code
* win_shell: Implement option 'profile', allowing the user to control powershell profile sourcing before running a command
* Set version_added to 2.8
* Make sure profile directory exists before writing profile file
* Changes to make tests immutable and align with ps args
* Use locking for concurrent file access
This implements locking to be used for modules that are used for
concurrent file access, like lineinfile or known_hosts.
* Reinstate lock_timeout
This commit includes:
- New file locking infrastructure for modules
- Enable timeout tests
- Madifications to support concurrency with lineinfile
* Rebase, update changelog and tests
We need to specify ansible_python_interpreter to avoid running interpreter discovery and selecting the incorrect interpreter.
Remove the import of lock in known_hosts since it is not used.
* Fix service integration test python selection.
* Clean up source in ansible_test_service.
* Rename script to include in python tests.
* Make shebang templating sanity friendly.
* Fix checksum.
* Use realpath of python to avoid selinux issues.
* Add to_ipv6_subnet function
* Use the correct function for subnet
* Corrected code style and tests
* Corrected testcase assertion
64 bits make 8 octets, or 4 hextets
* Import from correct module directly
* Added support for types parameter
- Parameter is used to specify multiple network types
* Fix documentation
* Apply suggestions from code review
Co-Authored-By: kbreit <kevin.breit@kevinbreit.net>
* Reworked type parameter to be a list so types isn't needed
* Re-add tags documentation
* Fix documentation around compatibility
* Convert tags to list from string
* Add changelog fragment
* Add support for multiple IPv6 addresses in nxos_l3_interface module
Cisco support multiple IPv6 addresses on each interface but only the first
IPv6 is considered by this module. There is no impact on the configuration
but the module is not idempotent.
* Add internal support for IPv6 list
* Fix module idempotency
* Initialize tests for nxos_l3_interface
* Fix IPv4 removal idempotency
* Fix data extraction from nxos config
* Fix silently ignored interfaces in nxos_l3_interface
* Add warning when interface does not exist in nxos config
* Adding cnos_user module to Ansible
* Update cnos_user.py
* Adding Functional test cases and unit test cases.
* Fixing Bug found in testing with Lenovo Mars.
* Review comments incorporated
* Review comments implemented.
* Copy paste mistake
* Modify EXOS module utils to utilize 'httpapi' or 'network-cli' connection
* Changes to cliconf plugin to support 'json' or 'text' output for compatibility between network-cli and httpapi
* Add HTTPAPI plugin supportng JSONRPC and RESTCONF for EXOS
* exos_facts modify commands with run script cli2json.py to command dictionary specifying 'json' output
Load appropriate fixtures
* Update exos_config module to utilize the get_diff and get_default_flag functionality.
JSONRPC doesn't work well with pipes, regex MULTILINE
* Support for NOS agnostic 'cli_config' module by implementing 'get_default_flag' and 'get_diff' functionality
* Update Ansible Documentation regarding the connections available for EXOS
* Only update sshd_config for FreeBSD tests.
* Also skip service restart unless config changed.
* Only pip install virtualenv for macOS tests.
* Also add retries and disable pip version check.
* Fix indentation.
* Reduce noise during remote instance setup.
* Refactor and clean up pip install.
* Decrease verbosity of commands.
* Remove unnecessary package install.
* nxos_interfaces_ospf: fix passive-interface states & check_mode
This fix addresses issues #41704 and #45343.
The crux of the problem is that `passive-interface` should have been treated as a tri-state value instead of a boolean.
The `no` form of the command disables the passive state on an interface (allows it to form adjacencies and send routing updates). It's essentially an override for `passive-interface default` which enables passive state on all OSPF interfaces.\*
This `no` config will be present in `running-config`.
\**See `router ospf` configuration.*
Since both enable and disable states are explicit configs, the proper way to remove either of these is with the `default` syntax.
Passive-interface config syntax:
```
ip ospf passive-interface # enable (nvgens)
no ip ospf passive-interface # disable (nvgens)
default ip ospf passive-interface # default (removes config, does not nvgen)
```
Code changes:
* `passive_interface` param changed from boolean to string, restricted to `true`,`false`,`default`.
* Several passive-interface specific checks were added because the existing module logic tends to test for true or false and doesn't handle the None case.
* Fixed `check_mode`.
Sanity verified on: N9K,N7K,N3K,N6K
* Fix doc header
* Unit tests for passive-interface
* doc fix#2
* Fix indent for SA
* Remove 'default' keyword, restore bool behavior
* remove changes to sanity
When using before and after in combination, the opposite behavior was induced. This PR makes the the replacement happen between the specified patterns as intended.
* Added integration tests
* Add changelog, porting guide entry, and minor doc fixes
* Removed required_together, updated tests
Since required_together: privatekey_path -> friendly_name, is not always
required it has been removed.
Updated openssl_pkcs12 integration tests to be in line with other
openssl_* modules, and added a test for export with no privatekey_path.
* linter fixes
* Removed cryptography from tests
* Added changelog fragment
* Removed non-necessary select_crypto_backend
* fix AWS plugin credential precedence for environment variables
* Allow aliases in direct plugins options
Consolidate precedence fix just in the doc fragment using aliases for mismatched options
* Access options with the option name rather than alias
* fix indentation
* update unit tests
* Improve readability
* Adding networks_cli_compatible option.
* Move network tests into own test file.
* Extend tests (for networks_cli_compatible=no).
* Adding tests for networks_cli_compatible=yes.
* There seems to be no way to create a container without at least one network attached.
* Integrate networks / purge_networks with comparisons.
* Speed up tests.
* Removing double dot.
* Add changelog.
* Use comparisons value only if the networks option has been specified. purge_networks on the other hand also removes networks if it has not been specified.
* add missing integration tests for postgresql_schema module
* add missing integration tests for postgresql_schema module
* postgresql_schema: add CI test with function in module from #54237
* postgresql_schema: add CI test with function in module from #54237
* add DROP SCHEMA test with check_mode=yes #54185
* Add the constructed config with legacy settings enabled to match the script
* Add interesting characters in tags and security group names
* add strict to config
* Add a stopped instance in inventory
* Create symlinks in the test
* Add reservation details to mock
* run script and plugin with a virtual env
* call the script with ansible-inventory
* Fix code coverage collection.
* Add write helper.
* Adjust modules (except openssl_certificate).
* Adding tests for mode (with openssl_privatekey).
* Add openssl_certificate support.
* Never, ever remove the output file before actually trying to generate new content for it.
Removal is only allowed when state=absent, or when the object has been regenerated and the result needs to be written to that place.
* Add changelog.
* Extend test.
* Add documentation for tags and network access
* Documentation changes from dag and sam
* Change examples to include proper YAML and not dict
* Update lib/ansible/modules/network/meraki/meraki_admin.py
Co-Authored-By: kbreit <kevin.breit@kevinbreit.net>
Announcements taken from https://github.com/ansible/community/wiki/RelEng:-ReleaseProcess
and then cleaned up:
* Update issue reporting blurb from feedback from acozine and gundalow
* Add a subject and to line for email output
* Ignore long line tests on the jinja templates (as jinja doesn't give
enough control to get rid of newlines when text wrapping)
* Skip shebang and compile tests for older pythons since this is a
release engineer-only script. (ok'd by mattclay)
* New cryptography backend for openssl_certificate
load_* functions in module_utils/crypto.py now have a backend paramter
which when set to 'cryptography' will return cryptography objects so
they can be used for both pyopenssl and cryptography backends.
Added a select_message_digest function too returning a cryptography
digest hash from `cryptography.hazmat.primitives.hashes`
Added new classes for Cryptography backend
* Run test with various backends.
* Prefixing tests.
* Make sure we have the correct backend available.
* Linting (flake8).
* Moved cryptography import to separate try/except
* Make sure certificate is actually valid at some time in the past.
* Improve error handling.
* Trying to fix validation for cryptography backend.
* Fixed issue with keyUsage test in assertonly
* Fixed CI/Lint issues
* Fix private key problem for OwnCA.
* Cryptography backend doesn't support v2 certs.
* issue an expired cert with command when using cryptography backend
* Added warning when backend is auto and v2 cert is requested
* Bumped min cryptography version to 1.6
* Correctly check for failure when backend is cryptography and cert is v2
* Use self.backend where possible
* Use secp521r1 EC when testing on CentOS6
* Fixed pylint issue
* AcmeCertificate support for both backends
* Review fixes
* Fixed missing '(' when raising error
* Fixed date_fmt loop
* Updated docs and requirements with cryptography
* Add openssl_certificate to changelog.
Fixes#40060
* Fix coding style errors
* Use CONNECTION LIMIT (no underscore)
* From review done by amenonsen and bcoca - Set default at None, make the change detection less confusing
* Added EXAMPLE on how to apply a database specific connection limit
* Added some basic tests for conn_limit applied to a database
* Check that conn_limit has actually been set / updated to 200
* Add changelog fragment regarding postgresql_db conn_limit parameter
* Add Bitbucket pipelines variable module
* Add tests
* Remove parameters check for `absent` state
* Update version_added documentation field
* Minor fixes
* A few additional cosmetic changes
* Move to source_control
* Rename lib/ansible/modules/source_control/bitbucket_pipelines_variable.py to lib/ansible/modules/source_control/bitbucket/bitbucket_pipelines_variable.py
* Reflect directory change
* Move these imports as well
* Rename 'key' parameter (API) to 'name' (GUI)
* Add missing __init__.py files to mark modules
* Rename module (pipeline should be singular)
* Adjust module references and variable names after renaming
* cs_volume: add volumes extraction and upload features
* cs_volume: Update doc, remove deprecated code
* cs_volume: Add unit tests for extract and upload features
* Force tests to set ansible_python_interpreter.
This avoids use of interpreter discovery unless tests opt-in to using it.
Avoiding interpreter discovery helps avoid selecting the wrong interpreter for tests.
* Prevent use of global inventory in tests.
This will avoid issues with tests picking up global inventory
instead of using implicit localhost as intended.
* Require hosts to exist in inventory for tests.
This will prevent tests from unintentionally passing
when hosts are not found in inventory. Does not prevent
the use of implicit localhost.
changing status option to statuses in the documentation
Adding choices to the argument spec to match the documentation from AWS.
Adding 'REVOKED', 'FAILED' to statuses documentation to match implementation.
Removing E322, E323 ignores for aws_acm_facts
* Move check_type_str() out of basic.py
* Move check_type_list() out of basic.py
* Move safe_eval() out of basic.py
* Move check_type_dict() out of basic.py
* Move json importing code to common location
* Move check_type_bool() out of basic.py
* Move _check_type_int() out of basic.py
* Move _check_type_float() out of basic.py
* Move _check_type_path() out of basic.py
* Move _check_type_raw() out of basic.py
* Move _check_type_bytes() out of basic.py
* Move _check_type_bits() out of basic.py
* Create text.formatters.py
Move human_to_bytes, bytes_to_human, and _lenient_lowercase out of basic.py into text.formatters.py
Change references in modules to point to function at new location
* Move _check_type_jsonarg() out of basic.py
* Rename json related functions and put them in common.text.converters
Move formatters.py to common.text.formatters.py and update references in modules.
* Rework check_type_str()
Add allow_conversion option to make the function more self-contained.
Move the messaging back to basic.py since those error messages are more relevant to using this function in the context of AnsibleModule and not when using the function in isolation.
* Add unit tests for type checking functions
* Change _lenient_lowercase to lenient_lowercase per feedback
* #50877:
* add support to postgresql_privs to use "FOR { ROLE | USER } target_role"
in "ALTER DEFAULT PRIVILEGES"
* fix sanity errors
* #50877: fix documentation and add a check for correct usage
of target_roles
* #50877: fix missing absent option for default privs with target_role
* #50877: add clear description, when target_roles can be used
* #50877: fix conflicts, formatting, and add a changelog fragment
* #50877: fix sanity error E335
* #50877: swap conditions and fix error to warning msg
* #50877: add tests for default privileges
* #50877: fix tests for default privileges
* #50877: fix tests for default privileges on centos 6
* * `reconcile_candidate()`
* old code searched the ip route configs for a given prefix+nexthop and then tried to remove the route based on prefix+nexthop only; this would fail when a static route was configured with `track` values.
* new code still looks for prefix+nexthop but uses the route config it finds on the device to remove it; e.g.
* search for: `ip route 192.168.20.64/24 192.0.2.3`
* find: `ip route 192.168.20.64/24 192.0.2.3 track 1 10`
* remove: `no ip route 192.168.20.64/24 192.0.2.3 track 1 10`
* logic cleanups:
* old code did a `show run` for every prefix. This can be a lot of data when there are large configs.
* new code uses filters to only return the static route configs.
* The filters now allow a common code path so no need for default vs vrf code paths
* `sanity` test: 100% Pass rate on N9K,N7K,N6K,N3K
- Bugfix Pull Request
`nxos_static_route`
* filter() does not return a list with python3
`filter()` was breaking pytest when it ran with python3, since it returns
an iterable instead of a list with python3.
Found that I didn't really need `filter()` anyway so just removed it
* restore var names /w/want/
The unstable alias wasn't intended for slow but otherwise stable
tests. However, the alternatives are to either dedicate an entire
test group to this one test or mark it unsupported.
Marking it unstable at least permits the test to run when changes
are made to the integration test or the module itself, which is
better than not running the tests at all.
* [WIP] Additional DevTest Lab modules
* updates
* try global schedule again
* dtl schedule
* try full dtl schedule test
* fixing schedule
* fixed problem
* another fix
* fixed test
* different time format
* fixed absent state
* test policy idempotence
* more updates
* updated devtestlabpolicy
* fixed syntax
* updated dtl policy test
* updated image id
* fixed test
* fixed bug
* fixed bugs and docs
* fixed bug
* + small cleanup
* reenabled tests but disabled leaking tests
* disabled test
* Mention Docker SDK for Python instead of docker-py / docker.
* Docs fixes.
* Add myself as docker_container author.
* Use array syntax for running command.
* Break long lines.
* Avoid failure when docker_version is None.
* Improve docker-py vs. docker note in requirements.
* Canonicalize Docker SDK for Python upgrade instructions.
* Split long line.
* Make it clearer which hostnames are meant.
* Adding cnos_system module to Ansible.
* Adding UT, Functional test required for cnos_system. Bugs came up are fixed
* Adding more files to the cnos_system suit.
* Fixed another problem where `group-timeout` was processed before `ip igmp snooping` was enabled
* `sanity` playbook:
* N6K: `show ip igmp snooping | json` succeeds on the device but doesn't return any data in body; added a skip to the sanity playbook to keep it out of CI
* Added a setup task to do initial cleanup on the device
* initial commit
* fix execute and \r\n
* \r attempt 2
* updated with integration tests and using new csharp import
* Apply suggestions from code review
Co-Authored-By: rcanderson23 <rcanderson23@gmail.com>
* fixed small docuement inaccuracies wrt returns
* removal of state in feature result
* removal of rc
* small fixes suggested in code review
* fixed variable assigning to result
* addition of comments on conditionals for clarity on matching
* swap logic of check_mode
* set $reboot_required so it is always returned
* removal of extraneous return information
* addition of integration tests
* set installation of parent features to true
* remove 2008 from tests
* changed test for TelnetClient from NetFx3
* change of tabs to spaces
* Add test check for OS version
* Remove nose from unittests
This PR migrates the last of our unittests from using nose to using
pytest. We don't need to install nose in our testing environments
anymore
* Use local dummy repo for flatpak_remote integration tests
* Excludes versions of Ubuntu older than 16.04 from tests
Since there are no flatpak packages available for these Ubuntu versions
* Adds handler that removes temporary symlink
Adds variable types to docs
Refactors unit tests to remove deprecated parameters
Adds missing Return values to documentation
Removes deprecated modules unit tests
adds ha order, ha group and ha load as failover types
refactors main() function and module manager to accomodate new patterns
updates docs
refactors unit tests
Refactors main() function and module manager in multiple modules in line with recent changes
Adds variable types to docs
Refactors unit tests to remove deprecated parameters
* Revert "changes to clusteR"
This reverts commit 33ee1b71e4bc8435fb315762a871f8c4cb6c5f80.
* Revert "changes to clusteR"
This reverts commit 33ee1b71e4bc8435fb315762a871f8c4cb6c5f80.
* Revert "Revert "changes to clusteR""
This reverts commit f1104a37b4.
* Revert "Revert "changes to clusteR""
This reverts commit f1104a37b4.
* documentation changes
* Revert "documentation changes"
This reverts commit 02c369d0414fdff492d90865c903bdade3174261.
* Issue with port being removed and added on modify
* adds function to do version checks for bigiq
* adds version limitation to bigiq application modules
Refactors main() function and module manager in multiple modules in line with recent changes
Adds variable types to docs
Refactors unit tests to remove deprecated parameters
* win_dns: Initial work
* win_dns: initial commit
* Renaming win_dns -> win_dns_record
* win_dns_record: Fix record leakage in output
* win_dns_record: Fix erroneous minimums enforcement
It is apparently completely legitimate to specify a TTL that is below
minimum; it will just get ignored in favor of the server's minimum.
* win_dns_record: Fix new-host changes reported incorrectly
* win_dns_record: Fix TTL changes reported incorrectly
* win_dns_record: Fix existing records not recognized
* win_dns_record: Remove obsolete object
* Refactorize check mode
* Add computer_name parameter
* Refactorize diff and changed to read DNS end state
* Fix pslint tests PSUseDeclaredVarsMoreThanAssignments and PSAvoidUsingCmdletAliases
* Minor fix, misnamed variable.
* win_dns_record: Fix "changed" state in check mode
* win_dns_record: cleanups
* win_dns_record: fix TTL update not changed regression
* Add initial integration tests
* win_dns_record: integration tests
* win_dns_record: Reverted 9cf5f2d8e6
The approach from that commit breaks check mode.
* win_dns_record: de-scope some records
These are either esoteric (meaning limited realworld testing)
or require additional thought to do properly (eg MX, which
has its "priority" level).
* win_dns_records tests: Ensure DNS services are installed
* Update lib/ansible/modules/windows/win_dns_record.py
Co-Authored-By: johnboy2
* Update lib/ansible/modules/windows/win_dns_record.py
Co-Authored-By: johnboy2
* Aggregated suggestions from dagwieers
* Fix bad powershell test argument
* win_dns_record partially converted to new Powershell module interface
win_dns_record converted to new Powershell module interface, except diff
and required_if
* win_dns_record: convert diff support
* win_dns_record: convert diff support to after-before style
* Don't test for Add-WindowsFeature
* win_dns_record: Fix diff
When check mode is used diff changes must be simulated.
* Style consistency/clean-ups
* Fix integration test typos
* Improve readability of diff output
The original intention of the diff output was to resemble zone file records
(except that the zone-name is added onto each record). In that light, the
missing *record class* information (always "IN" in our case) was an oversight.
This just makes the diff output more "instantly readable" for DNS gurus.
* win_dns_record: Add diff tests
* Fix ansible-test sanity check fails
* Apply suggestions from code review
Added suggestions from dagwieers
Co-Authored-By: johnboy2 <john@jnelson.ca>
* win_dns_record: Skip 2008 and friends
* Reword error messages so they start capitalized.
* Fix sanity error
* win_dns_record: Document ttl range
* win_dns_record: Additional supportability barriers in tests
* win_dns_record: Typo
* win_dns_record: Sanity fix
* win_dns_record: Use OS-test only for compat checking
* Moving comparision functions to compare.py from common.py
* Refactors main() function and module manager in multiple modules in line with recent changes
Adds variable types to docs
Refactors unit tests to remove deprecated parameters
* Moving comparision functions to compare.py from common.py
* fixes issue with data group elements containing IPs with Route Domains
refactors main() function and module_manager to accomodate new patterns
updates doc variables
anasbadaha