* Add --offline option to 'ansible-galaxy collection install' to prevent querying distribution servers
This allows installing/upgrading individual tarfiles to have dependency resolution.
Previously needed to be done manually with --no-deps or else all collections and dependencies needed to be included in the requirements.
Co-authored-by: Sviatoslav Sydorenko <wk.cvs.github@sydorenko.org.ua>
* Add a toggle to control the number of signatures required to verify the authenticity of a collection
* Make the default number of required valid signatures 1
* Add option to make signature verification strict and fail if there are no valid signatures (e.g. "+1")
* Use a regex to validate --required-valid-signature-count
* Add a toggle to limit the gpg status codes that are considered a failure
* Update documentation and changelog
* Add unit and integration tests for the new options
* Fixes#77146
Fix using user-provided signatures when running 'ansible-galaxy collection verify ns.coll --offline'
Add a test for a user-provided signature when running ansible-galaxy collection verify with --offline
Fix displaying overall gpg failure without extra verbosity
Add a test for displaying gpg failure without verbosity
Improve documentation to be more clear that signature verification only currently applies to collections directly sourced from Galaxy servers
* ansible-galaxy collection install|verify:
- Support verifying the origin of the MANIFEST.json when the Galaxy server has provided signatures.
- Allow supplemental signatures to use during verification on the CLI/requirements file.
* ansible-galaxy collection install:
- Support disabling signature verification. This silences the warning provided by ansible-galaxy if the Galaxy server provided signatures it cannot use because no keyring is configured.
- Store Galaxy server metadata alongside installed collections for provenance. This is used by 'ansible-galaxy collection verify --offline'.
* Add unit tests for method that gets signatures from a Galaxy server
* Add integration tests for user-provided signature sources
- Test CLI option combinations
- Test installing collections with valid/invalid signature sources
- Test disabling GPG verification when installing collections
- Test verifying collections with valid/invalid signature sources
* Make signature verification advisory-by-default if signatures are provided by the Galaxy server
- Make the default keyring None
- Warn if the keyring is None but the Galaxy server provided signatures
- Error if the keyring is None but the user supplied signatures
- Error if the keyring is not None but is invalid
* changelog
* add ansible-galaxy user documentation for new options
Co-authored-by: Matt Martz <matt@sivel.net>
Co-authored-by: Sviatoslav Sydorenko <wk.cvs.github@sydorenko.org.ua>
Co-authored-by: Martin Krizek <martin.krizek@gmail.com>
Co-authored-by: Sandra McCann <samccann@redhat.com>
Co-authored-by: Andy Mott <amott@redhat.com>
Co-authored-by: John R Barker <john@johnrbarker.com>
* ansible-galaxy: Clone git collections using shallow clones
This ensures the collection obtained via git url is a result of a
shallow git clone (git clone --depth=1). The git history of the
collection is not used by ansible, and as such, cloning the entire
history of the repo is unnecessary.
Signed-off-by: Tomas Babej <tomas@tbabej.com>
* ansible-galaxy: Only perform shallow clones on non-versioned git urls
In general, the version can be anything we can checkout (branch, tag,
but also a commit hash). In particular for commit hashes we cannot
perform a shallow clone.
Err on the safe side and only perform shallow clones for non-versioned
git urls (cloning HEAD).
* galaxy-install: Make shallow cloning compatible with older Python versions
Signed-off-by: Tomas Babej <tomas@tbabej.com>
* Pass args as a tuple
Add tests for the git command created from different repo and version combinations
* changelog
Co-authored-by: Tomas Babej <tomas@tbabej.com>
* --offline allows in-place verify for installed collections with manifests
* manifest hash, collection name, version, and path are now always displayed
* test updates
PR #72591
This change:
* Adds an artifacts manager that abstracts away extracting the
metadata from artifacts, downloading and caching them in a
temporary location.
* Adds `resolvelib` to direct ansible-core dependencies[0].
* Implements a `resolvelib`-based dependency resolver for
`collection` subcommands that replaces the legacy
in-house code.
This is a dependency resolution library that pip 20.3+ uses
by default. It's now integrated for use for the collection
dependency resolution in ansible-galaxy CLI.
* Refactors of the `ansible-galaxy collection` CLI.
In particular, it:
- reimplements most of the `download`, `install`, `list` and
`verify` subcommands from scratch;
- reuses helper bits previously moved out into external modules;
- replaces the old in-house resolver with a more clear
implementation based on the resolvelib library[0][1][2].
* Adds a multi Galaxy API proxy layer that abstracts accessing the
version and dependencies via API or local artifacts manager.
* Makes `GalaxyAPI` instances sortable.
* Adds string representation methods to `GalaxyAPI`.
* Adds dev representation to `GalaxyAPI`.
* Removes unnecessary integration and unit tests.
* Aligns the tests with the new expectations.
* Adds more tests, integration ones in particular.
[0]: https://pypi.org/p/resolvelib
[1]: https://github.com/sarugaku/resolvelib
[2]: https://pradyunsg.me/blog/2020/03/27/pip-resolver-testing
Co-Authored-By: Jordan Borean <jborean93@gmail.com>
Co-Authored-By: Matt Clay <matt@mystile.com>
Co-Authored-By: Sam Doran <sdoran@redhat.com>
Co-Authored-By: Sloane Hertel <shertel@redhat.com>
Co-Authored-By: Sviatoslav Sydorenko <webknjaz@redhat.com>
Signed-Off-By: Sviatoslav Sydorenko <webknjaz@redhat.com>
* Enable installing collections from git repositories
* Add tests for installing individual and multiple collections from git repositories
* Test to make sure recursive dependencies with different syntax are deduplicated
* Add documentation
* add a changelog
* Skip Python 2.6
* Only fail if no collections are located in a git repository
Add support for a 'type' key for collections in requirement.yml files.
Update the changelog and document the supported keys and allowed values for the type.
Add a note that the collection(s) in the repo must contain a galaxy.yml
* Add a warning about embedding credentials in SCM URLs
* Update with review suggestions
* suppress sanity compile failure for Python 2.6
* ansible-galaxy - remove warning during collection install
If existing collections do not contain a MANIFEST.json, which is common
for collections under development that were not installed from Ansible
Galaxy, fall back to inspecting galaxy.yml rather than displaying a
warning.
A warning will still be displayed in neither a MANIFEST.json nor
galaxy.yml are present.
* Update unit tests
* Support pre-releases via new SemanticVersion. Fixes#64905
* Don't treat buildmeta as prerelease
* Don't inherit from str and int
* Add helper method to try and construct a SemanticVersion from a LooseVersion
* Don't count major 0 as pre-release, it's different
* Guard against invalid or no version in LooseVersion
* return a bool
* Add integration tests for pre-release
* Fix up lingering issues with comparisons
* typo fix
* Always allow pre-releases in verify
* Move pre-release filtering into CollectionRequirement, add messaging when a collection only contains pre-releases
* Update changelog
* If explicit requirement allow pre releases
* Enable pre-releases for tar installs, and collections already installed when they are pre-releases
* Drop --pre-release alias, make arg name more clear
* Simplify code into a single line
* Remove build metadata precedence, add some comments, and is_stable helper
* Improve from_loose_version
* Increase test coverage
* linting fix
* Update changelog
* ansible-galaxy - add config to control the display wheel
* Fix changelog and make test more stable
* Don't use display thread at all if progress wheel isn't being shown
* Refactor galaxy collection API for v3 support
* Added unit tests for GalaxyAPI and starting to fix other failures
* finalise tests
* more unit test fixes
* Add galaxy collections API v3 support
Issue: ansible/galaxy-dev#60
- Determine if server supports v3
Use 'available_versions' from `GET /api`
to determine if 'v3' api is available on
the server.
- Support v3 pagination style
ie, 'limit/offset style', with the paginated
responses based on https://jsonapi.org/format/#fetching-pagination
v2 galaxy uses pagination that is more or less
'django rest framework style' or 'page/page_size style',
based on the default drf pagination described
at https://www.django-rest-framework.org/api-guide/pagination/#pagenumberpagination
- Support galaxy v3 style error response
The error objects returned by the galaxy v3 api are based
on the JSONAPI response/errors format
(https://jsonapi.org/format/#errors).
This handles that style response. At least for publish_collection
for now. Needs extracting/generalizing.
Handle HTTPError in CollectionRequirement.from_name()
with _handle_http_error(). It will raise AnsibleError
based on the json in an error response.
- Update unit tests
update test/unit/galaxy/test_collection*
to paramaterize calls to test against
mocked v2 and v3 servers apis.
Update artifacts_versions_json() to tale an
api version paramater.
Add error_json() for generating v3/v3 style error
responses.
So now, the urls generated and the pagination schema
of the response will use the v3 version if
the passed in GalaxyAPI 'galaxy_api' instance
has 'v3' in it's available_api_versions
* Move checking of server avail versions to collections.py
collections.py needs to know the server api versions
supported before it makes collection related calls,
so the 'lazy' server version check in api.GalaxyAPI
is never called and isn't set, so 'v3' servers weren't
found.
Update unit tests to mock the return value of the
request instead of GalaxyAPI itself.
* ansible-galaxy: support multiple servers on install
* Added docs for the server configuration file
* Fix up doc string for requirements file format
* Fix bugs after testing
* Fix kwarg doc and added version
* Fix typo and doc improvement
* Fix base64 encoding and allow --server to override list
* ansible-galaxy: add collection init sub command
* Fix changelog and other sanity issues
* Slim down skeleton structure, fix encoding issue on template
* Fix doc generation code to include sub commands
* Added build step
* Tidy up the build action
* Fixed up doc changes and slight testing tweaks
* Re-organise tests to use pytest
* Added publish step and fixed up issues after working with Galaxy
* Unit test improvments
* Fix unit test on 3.5
* Add remaining build tests
* Test fixes, make the integration tests clearer to debug on failures
* Removed unicode name tests until I've got further clarification
* Added publish unit tests
* Change expected length value
* Added collection install steps, tests forthcoming
* Added unit tests for collection install entrypoint
* Added some more tests for collection install
* follow proper encoding rules and added more tests
* Add remaining tests
* tidied up tests and code based on review
* exclude pre-release versions from galaxy API
Sloane Hertel