* Fix prompt mismatch issue for ios
Fixes#40884#44463
* If the command prompt is matched check if data is
still pending to be read from buffer.
* This fix adds a new timer `buffer_read_timeout`
which will be trigerred after command prompt
is matched and data is attempted to be read from channel.
If not data is present of channel the timer will expire
and response we be returned to calling function.
* Fix unit test failure
* Update to make buffer timeout float
* Update doc and fix review comment
* Fix CI issues
* Update doc
* Fix review comments
* Fix review comments
* Add support for IOS vlan parsing filter.
Example usage below:
{% set parsed_vlans = vlans | vlan_parser %}
switchport trunk allowed vlan {{ parsed_vlans[0] }}
{% for i in range (1, parsed_vlans | count) %}
switchport trunk allowed vlan add {{ parsed_vlans[i] }}
* Update test_network.py
Add import statement for filter
* Fixed PEP8 issues relating to comments
* Fix PEP8 issues related to blank lines
* Removed magic numbers for line lengths. This should generalize support
to other IOS-like NOS that use similar methods for listing vlans. The
default arguments for line lengths will still be specific to Cisco IOS.
The unit tests for line length are still specific to Cisco IOS.
* Move ansible.compat.tests to test/units/compat/.
* Fix unit test references to ansible.compat.tests.
* Move builtins compat to separate file.
* Fix classification of test/units/compat/ dir.
* allow jinja2 unique filter compat
* detect if unique is provided, fallback with warning
* handle j2 specific params
* now all filters using unique must pass environment
* added env to tests
also normalized on how we normally import and use exceptoins
* Unify login behavior between 1Password lookup plugins and module
- Use the same names for all credential aspects
- Only require the minimal amount of information for each
- Add more examples
* Change parameter terms
- use terms in line with 1Password documentation.
- update examples
- update tests
* Improve error messages in lookup plugin
* Unify onepassword_facts with lookup plugins
- use same methods and logic for signing in or reusing existing session
- unify terms with lookup plugins
* Change rc test for determing login
An rc other than 1 can be returned when a current login session does not exist.
* Create AnsibleModuleError class
ansible.errors is not available to modules, so create an AnsibleModuleError class within the module
Do not user os.path.expanduser since this is already done by virtue of the type being "path" in the argument spec.
* Add note about risk with fact caching sensitive data
* Add note on op version that was used for testing
* Ensure that the src file contents is converted to unicode in diff info. Fixes#45717
* Fix up and cleanup
* The diff functionality in the callback plugins should have the
to_text() calls removed since we're now doing it in ActionBase
* catching of UnicodeError and warnings in the callback diff
functionality from 61d01f549f haven't been
needed since we switched to to_text so remove them.
* Add a note to ActionBase's diff function giving an example of when the
diff function will be inaccurate and how to fix it
* Fix callback get_diff() tests
I believe the unittests of callback's get_diff() were wrong. They were
sending in a list where strings were expected. Because previous code
was transforming the lists into strings via their repr, the previous
tests did not fail but they would have formatted the test cases output
in an odd way if we had looked at it.
* Try to intuit proper plugins to send to ansible-connection
* Move sub-plugins to init so that vars will be populated in executor
* Fix connection unit tests
On all supported Pythons, the io.BytesIO is always a stream
implementation using an in-memory bytes buffer. Makes code slightly more
forward compatible by reducing use of the six module.
* Add check in network_cli to handle all prompts
* Add check_all flag to mandatory handle all the command prompt
in prompts list. By default if any one prompt is handled
remaining prompts are ignored.
* Fix cli_command multiple prompt issue
* If multiple prompt and answers are given as input network_cli
handles only the first prompt that matched by default
* If a command execution results in muliple prompt the fix
add support to set a boolean option C(check_all) to indicate
network_cli to wait till all the prompts and answers are processed.
* Update cli_command
* Update api doc
* Fix unit test failure
* Fix CI failure
* Update network_cli
* Fix review comment
* Add common and Swagger client utils for FTD modules
* Update FTD HTTP API plugin and add unit tests for it
* Add configuration layer handling object idempotency
* Add ftd_configuration module with unit tests
* Add ftd_file_download and ftd_file_upload modules with unit tests
* Validate operation data and parameters
* Fix ansible-doc, boilerplate and import errors
* Fix pip8 sanity errors
* Update object comparison to work recursively
* Add copyright
* Share the implementation of hashing for both vars_prompt and password_hash.
* vars_prompt with encrypt does not require passlib for the algorithms
supported by crypt.
* Additional checks ensure that there is always a result.
This works around issues in the crypt.crypt python function that returns
None for algorithms it does not know.
Some modules (like user module) interprets None as no password at all,
which is misleading.
* The password_hash filter supports all parameters of passlib.
This allows users to provide a rounds parameter, fixing #15326.
* password_hash is not restricted to the subset provided by crypt.crypt,
fixing one half of #17266.
* Updated documentation fixes other half of #17266.
* password_hash does not hard-code the salt-length, which fixes bcrypt
in connection with passlib.
bcrypt requires a salt with length 22, which fixes#25347
* Salts are only generated by ansible when using crypt.crypt.
Otherwise passlib generates them.
* Avoids deprecated functionality of passlib with newer library versions.
* When no rounds are specified for sha256/sha256_crypt and sha512/sha512_crypt
always uses the default values used by crypt, i.e. 5000 rounds.
Before when installed passlibs' defaults were used.
passlib changes its defaults with newer library versions, leading to non
idempotent behavior.
NOTE: This will lead to the recalculation of existing hashes generated
with passlib and without a rounds parameter.
Yet henceforth the hashes will remain the same.
No matter the installed passlib version.
Making these hashes idempotent.
Fixes#15326Fixes#17266Fixes#25347 except bcrypt still uses 2a, instead of the suggested 2b.
* random_salt is solely handled by encrypt.py.
There is no _random_salt function there anymore.
Also the test moved to test_encrypt.py.
* Uses pytest.skip when passlib is not available, instead of a silent return.
* More checks are executed when passlib is not available.
* Moves tests that require passlib into their own test-function.
* Uses the six library to reraise the exception.
* Fixes integration test.
When no rounds are provided the defaults of crypt are used.
In that case the rounds are not part of the resulting MCF output.
NOTE:
1. use os.open() with os.O_CREAT|os.O_EXCL to check existence
and create a lock file if not exists, it's an atomic operation
2. the fastest process will create the lock file and others will
wait until the lock file is removed
3. after the writer finished writing to the password file, all the reading
operations use built-in open so processes can read the file parallel
According to the do_encrypt interface, encrypt arg should be the hash method name used for encrypting returning password. But in the doc and lookup code it's a boolean flag, correct it to string.
* win_reboot: fix 2.6 issues and better handle post reboot reboot
* changed winrm _reset to reset
* Add handler to reset calls when .reset() throws an AnsibleError on older hosts
* Moving back to _reset to get the issue fixed
* Fix tmpdir on non root become
- also avoid exception if tmpdir and remote_tmp are None
- give 'None' on deescalation so tempfile will fallback to it's default behaviour
and use system dirs
- fix issue with bad tempdir (not existing/not createable/not writeable)
i.e nobody and ~/.ansible/tmp
- added tests for blockfile case
* Revert "Temporarily revert c119d54"
This reverts commit 5c614a59a6.
* changes based on PR feedback and changelog fragment
* changes based on the review
* Fix tmpdir when makedirs failed so we just use the system tmp
* Let missing remote_tmp fail
If remote_tmp is missing then there's something more basic wrong in the
communication from the controller to the module-side. It's better to
be alerted in this case than to silently ignore it.
jborean and I have independently checked what happens if the user sets
ansible_remote_tmp to empty string and !!null and both cases work fine.
(null is turned into a default value controller-side. empty string
triggers the warning because it is probably not a directory that the
become user is able to use).
* Create base class for network-style connections
* clean up some differences
* Move NetworkConnectionBase
* Tweak netconf for tests
* Tweak when network_os is checked to avoid failing tests
* Pull back exec_command
* fix minor issues with debug and item labels
- no more `item=None`, we always have a label now
- debug should only show expected information, either msg= or the var in var=
- also fixed method name, deprecated misleading _get_item
* Refactor ios cliconf plugin and ios_config module
* Refactor ios cliconf plugin to support generic network_config module
* Refactor ios_config module to work with cliconf api's
* Enable command and response logging in cliconf pulgin
* cliconf api documentation
* Fix unit test and other minor changes
* Doc update
* Fix CI failure
* Add default flag related changes
* Minor changes
* redact input command logging by default
* All instances of local connection should use _remote_is_local=True. Fixes#40551
* Switch to instance attribute for synchronize
* Add test that shows that synchronize _remote_is_local addresses tmpdir building
* Fix setting the cache when refresh_cache or --flush-cache are used
* Use jsonify function that handles datetime objects in jsonfile cache plugin
* Don't access self._options directly
* Add initial integration tests for aws_ec2 inventory plugin
* Add CI alias
* Fix and add a few more unit tests
* Add integration tests for constructed
* Fix typo
* Use inventory config templates
* Collect all instances that are not terminated by default
* Create separate playbook for setting up the VPC, subnet, security group, and finding an image for the host
Create a separate playbook for removing the resources
* Allow easier grouping by region and add an example
* use a unified json encode/decode that can handle unsafe and vault
* winrm: add better exception handling for krb5 auth with pexpect
* Added changelog fragment
* Added exception handler in case kinit path isn't valid, added test cases
* fixed for Python 2 compatibility
* win_updates: add scheduled tasks back in for older hosts
* Fixed up typo in category name error message
* Fixed up some minor issues after merge
* added changelog fragment
* Default to become but add override to use scheduled tasks
* Added basic unit tests for win_updates
* fix minor typos
* add pytest_cache to gitignore
* onepassword lookup plugin
* fix linter/style test complaints
* second pass at making pycodestyle happy
* use json module instead of jq
* update copyrights, license & version added
* fix python2 compatibility
* doh. fix spacing issue.
* use standard ansible exception
* remove potentially problematic stdin argument
* actually call assertion method
* add support for top-level fields
* make vault uuids pedantically consistent in fixture
* fix new style issues
* ability specify section & correct case handling
* improve error handling
* add onepassword_raw plugin
* Add maintainer info
* Move common code to module_utils/onepassword.py
* Load raw data JSON data for easier use in Ansible
* Put OnePass class back inside lookup plugin
There is no good place for sharing code across lookups currently.
* Remove debugging code in unit tests
* Patche proper module in raw unit tests
* Add changelog entry
Co-authored-by: Scott Buchanan <sbuchanan@ri.pn>
* WIP Pull persistent connection parameters via get_option
* Fix pep8
* Add use_persistent_connection setting to paramiko_ssh plugin
* Add vars section to persistent_command_timeout setting and prevail provider values over config manager
* Use persistent_command_timeout on network_cli instead of timeout
* Fix unit tests
If we don't call loader to get network_cli, then _load_name is never
set and we get KeyError.
* Pull persistent_command_timeout via config manager for ios connection local
* Pull persistent_command_timeout via config manager on connection local
* create module tmpdir based on remote_tmp
* Source remote_tmp from controller if possible
* Fixed sanity test and not use lambda
* Added expansion of env vars to the remote tmp
* Fixed sanity issues
* Added note around shell remote_tmp option
* Changed fallback tmp dir to ~/.ansible/tmp to make shell defaults
* Adding slx_command module and supporting module_utils.
This commit adds the slx_command module and tests as well as the
required slxos module_utils.
* Update copyright in header
* Adding missing module init
* Cleaning up shebangs/licensing.
* Incorporating feedback
Removing reference to `waitfor` alias in `slxos_command` module.
Adding `Extreme Networks` to `short_description` of `slxos_command` module.
* Adding cliconf tests
* Fixing 3.X tests
* Adding docstrings to test methods for slxos cliconf tests
* Adding slxos terminal tests
* Adding slxos module_utils tests
* Adding Extreme Networks team members to BOTMETA.yml
This offers an optimization that allows loading larger
inventories of various structure by improving the
scaling laws involved for adding hosts and groups.
The primary speed benefit is the elimination of duplicate
recusion from traversing converging paths.
* aws ssm parameter lookup test case - fails demonstrating no exception when parameter missing
* aws ssm parameter lookup - fail in case parameter doesn't exist
* aws ssm parameter lookup test case - failing case for nice return from path lookup
* aws ssm parameter lookup - convert incoming taglist to a key-value dictionary
* aws ssm parameter lookup - pep8 / style clean up
* aws_ssm lookup plugin rewrite for more standard interface
* aws_ssm module and lookup - introduce integration test and fix:
* aws_ssm module and lookup - error case integraton test and many PEP8 and other cleanups
* aws ssm parameter lookup - Various fixes in response to review + recursive fix & test
* aws ssm parameter lookup - more in response to review - shertel/abadger
* aws ssm parameter lookup unit test - move to mocker according to abadger
* aws ssm parameter lookup - integrate with new documentation fragment
* aws ssm parameter lookup - accept either aws_profile or boto_profile
* aws ssm parameter lookup - eliminate lookup document fragment until env vars are fixed later
* Imported lookup plugin from Role
* Plugin cleanup, including:
* Use existing Python YAML parsing
* Remove environment variables as connection options
* Added initial debugging information
* Reworked the lookup plugin using the Python Request library. As it's available through Ansible, it makes communication with Conjur much more straight forward.
* Removed un-used libraries
* Fixed linting issues
* Standardized output on `format` and insure it works for 2.6, 2.7, and 3.x.
* Use quote_plus from the six library for improved python 2/3 behavior.
* Refactored identity & configuration to prefer user's file. This also includes a refactor to remove an un-needed dictionary merge method.
* Removed `requests` in favor of `ansible.module_utils.urls`.
* Refactored netrc loading to warn if host is not present.
* Tests and a refactor to support easier testing.
* Added reference to website
* Fixed two linting errors
* Fixed an extra line found by linting
* Updated file write to use binary to insure config files are written correctly
* Resolved linting issues
* Refactored config & identity loading to take advantage of plugin options
* Cleanup a bunch of small items caught by linting
* Removed extra line caught by linting
* Swapped in pytest and added some tests with mocked network responses
* Pushing to see if this approach works better...
* Refactored be open_url mocking based on feedback
* Fixed a couple linting issues & refactored mocking into each method to attempt to resolve a failing test
* Use a generic MagicMock for python 2.6
* Fixes doc typo
require -> required
* Use `type: path` in identity_file and config_file
Also removes `expanduser` calls below (which will now be called automatically on
paths.)
* Defines maintainers for conjur_variable plugin
* BOTMETA.yml:
** defines $team_cyberark_conjur as maintainers of Conjur Variable plugin
** adds myself and @jvanderhoof to that team
* Adds URLs to relevant documentation for Conjur Variable lookup plugin
* Clarifies "the server," "the machine" -> "controlling host"
The machine identity used is that of the Ansible controlling host, not any
server being provisioned or instructed. This documentation change aims to make
that relationship clear.
* Adds response code to exception message on authentication failure
* Enhances exception messages to specify the controlling host
These error messages are less likely to confuse a user as to which machine is
associated with the files, identities, and configurations being described.
* Adds ANSIBLE_METADATA for Conjur variable lookup plugin
aws_ec2 is an inventory plugin intended to replace uses of the `contrib/inventory/ec2.py`
inventory script.
For advanced grouping, please use the `constructed` inventory plugin.
* allow shells to have per host options, remote_tmp
added language to shell
removed module lang setting from general as plugins have it now
use get to avoid bad powershell plugin
more resilient tmp discovery, fall back to `pwd`
add shell to docs
fixed options for when frags are only options
added shell set ops in t_e and fixed option frags
normalize tmp dir usag4e
- pass tmpdir/tmp/temp options as env var to commands, making it default for tempfile
- adjusted ansiballz tmpdir
- default local tempfile usage to the configured local tmp
- set env temp in action
add options to powershell
shift temporary to internal envvar/params
ensure tempdir is set if we pass var
ensure basic and url use expected tempdir
ensure localhost uses local tmp
give /var/tmp priority, less perms issues
more consistent tempfile mgmt for ansiballz
made async_dir configurable
better action handling, allow for finally rm tmp
fixed tmp issue and no more tempdir in ballz
hostvarize world readable and admin users
always set shell tempdir
added comment to discourage use of exception/flow control
* Mostly revert expand_user as it's not quite working.
This was an additional feature anyhow.
Kept the use of pwd as a fallback but moved it to a second ssh
connection. This is not optimal but getting that to work in a single
ssh connection was part of the problem holding this up.
(cherry picked from commit 395b714120522f15e4c90a346f5e8e8d79213aca)
* fixed script and other action plugins
ensure tmpdir deletion
allow for connections that don't support new options (legacy, 3rd party)
fixed tests
* Cache tasks as they are queued instead of en masse
This also moves the task caching from the PlayIterator to the
StrategyBase class, where it makes more sense (and makes it easier
to not have to change the strategy class methods leading to an API
change).
Fixes#31673
* Cleaning up unit tests due to 502ca780
* Provide a way to explicitly invoke the debugger with in the debug strategy
* Merge the debugger strategy into StrategyBase
* Fix some logic, pin to a single result
* Make redo also continue
* Make sure that if the debug closure doesn't need to process the result, that we still return it
* Fix failing tests for the strategy
* Clean up messages from debugger and exit code to match bin/ansible
* Move the FieldAttribute higher, to apply at different levels
* make debugger a string, expand logic
* Better host state rollbacks
* More explicit debugger prompt
* ENABLE_TASK_DEBUGGER should be boolean, and better docs
* No bare except, add pprint, alias h, vars to task_vars
* _validate_debugger can ignore non-string, that can be caught later
* Address issue if there were no previous tasks/state, and use the correct key
* Update docs for changes to the debugger
* Guard against a stat going negative through use of decrement
* Add a few notes about using the debugger on the free strategy
* Add changelog entry for task debugger
* Add a few versionadded indicators and a note about vars -> task_vars
* Change cast_list_to_dict to more generic rekey_on_member
cast_list_to_dict was taking an arbitrary data format in and returning
an arbitrary data format out. Rework this to be a more generic function
which creates a dict of dicts based on a member of the dict.
Remove cast_dict_to_list since rekey_on_member handles the use cases we
know about and cast_dict_to_list suffers from the same problems as
cast_list_to_dict. If this is still needed we could think about filters
we could add to do this in a short jinja2 pipeline.
* Fix bare excepts (bare excepts even catch sys.exit())
* Fix _clean_result for debug callback with 1 char var names
The check in _clean_results was removing any keys that happened
to be one of the chars in ('invocation') instead of the string
'invocation'. This was meant to be a tuple but there was no comma
so the for iterated the string instead of the tuple.
Introduced in 9dba580204
Update unit test to catch this.
Fixes#33723
* Use .pop() to remove invocation from results dict
In base callback _clean_results, simplify the way the
'invocation' item is removed.
Add some more unit tests.
* add type manipulation
* update for py3
* add tests for list to dict
* Add dict to list tests
* Update tests to search for regex in response
* pep8 clean up
* update Exception for py3
* update test to be py2/3 compat
* update for py26 compat
* potential fix for py3 and py26
* potential fix for py3 and py26 take2
* add new line to kick off shippable
* remove cache file created
* fix filter name
* add space for shipable
* Adding aliases for field attributes and renaming async attribute
As of Python 3.7, the use of async raises an error, whereas before the use
of the reserved word was ignored. This adds an alias field for field attrs
so that both async and async_val (interally) work. This allows us to be
backwards-compatible with 3rd party plugins that may still reference Task.async,
but for the core engine to work on Py3.7+.
* Remove files fixed for 'async' usage from the python 3.7 skip list
* Allow the user to circumvent adding -tt on ssh commands to help aid in
debugging ssh related problems.
* Move config to the plugin
* Set version_added
* Change yaml section to "connection"
* Fix ssh unit tests
* Add new filter to parse xml output for network use cases
Fixes#31026
* Add parse_xml filter
* Add documentation for parse_xml filter
* Edited for clarity.
* Fix review comment and add unit tests
* Fix unit test CI failure
* Fix CI issues
* Fix unit test failures
* Fix review comments
* More copy edits.
* included inventory and callback in new config
allow inventory to be configurable
updated connection options settings
also updated winrm to work with new configs
removed now obsolete set_host_overrides
added notes for future bcoca, current one is just punting, it's future's problem
updated docs per feedback
added remove group/host methods to inv data
moved fact cache from data to constructed
cleaner/better options
fix when vars are added
extended ignore list to config dicts
updated paramiko connection docs
removed options from base that paramiko already handles
left the look option as it is used by other plugin types
resolve delegation
updated cache doc options
fixed test_script
better fragment merge for options
fixed proxy command
restore ini for proxy
normalized options
moved pipelining to class
updates for host_key_checking
restructured mixins
* fix typo
* implements jsonrpc message passing for ansible-connection
* implements more generic mechanism for persistent connections
* starts persistent connection in task_executor if enabled and supported
* supports using network_cli as top level connection plugin
* enhances logging for persistent connection to stdout
* Update action plugins
* Fix Python3 RPC
* Fix Junos bytes<-->str issues
* supports using netconf as top level connection plugin
* Error message when running netconf on an unsupported platform
* Update tests
* Fix `authorize: yes` for `connection: local`
* Handle potentially JSON data in terminal
* Add clarifying detail if possible on ConnectionError
* better cleanup on task results display
callbacks get 'clean' copy of result objects
moved cleanup into result object itself
removed now redundant callback cleanup
moved no_log tests
* moved import as per feedback
* Ansible Config part2
- made dump_me nicer, added note this is not prod
- moved internal key removal function to vars
- carry tracebacks in errors we can now show tracebacks for plugins on vvv
- show inventory plugin tracebacks on vvv
- minor fixes to cg groups plugin
- draft config from plugin docs
- made search path warning 'saner' (top level dirs only)
- correctly display config entries and others
- removed unneeded code
- commented out some conn plugin specific from base.yml
- also deprecated sudo/su
- updated ssh conn docs
- shared get option method for connection plugins
- note about needing eval for defaults
- tailored yaml ext
- updated strategy entry
- for connection pliugins, options load on plugin load
- allow for long types in definitions
- better display in ansible-doc
- cleaned up/updated source docs and base.yml
- added many descriptions
- deprecated include toggles as include is
- draft backwards compat get_config
- fixes to ansible-config, added --only-changed
- some code reoorg
- small license headers
- show default in doc type
- pushed module utils details to 5vs
- work w/o config file
- PEPE ATE!
- moved loader to it's own file
- fixed rhn_register test
- fixed boto requirement in make tests
- I ate Pepe
- fixed dynamic eval of defaults
- better doc code
skip ipaddr filter tests when missing netaddr
removed devnull string from config
better becoem resolution
* killed extra space with extreeme prejudice
cause its an affront against all that is holy that 2 spaces touch each other!
shippable timing out on some images, but merging as it passes most
* [password] _random_password -> random_password and moved to util/encrypt.py
* [passwordstore] Use built-in random_password instead of pwgen utility
* [passwordstore] Add integration tests
1fe67f9 introduced retries to the ssh connection put file and fetch
file. Unfortunately, that change broke the smart transport because it
started raising exceptions instead of returning from _run(). This
breakage is documented in #23711.
An attempt to fix it was made at #23717 but the first attempt was
objected to as needing to touch too much code. The second attmept was
objected to as smart was forced to encapsulate retries (thus retrying
a sftp "rety" times before trying scp "retry" times and then finally
moving onto piped). This third attempt has retries encapsulate smart.
So each sub-transport is tried once and if all three fail, another retry
attempt is made which tries each of the three again.
Fixes#23711Fixes#23717
* add first, last and next usable
* add usable ip filters
* add size usable, range usable and wildcard
* add ip prefix and netmask filter
* add network formatting and check if ip in subnet
* clean up order, add comments
* fix pep8
* update format by index
* clean up and updates from jmcgill298
* test/: PEP8 compliancy
- Make PEP8 compliant
* Python3 chokes on casting int to bytes (#24952)
But if we tell the formatter that the var is a number, it works
* eos python3 changes
* changes to convert response from byte to text
* Add dellos6 python3 changes
Make `execute_command` arguments and its
return value complaint to PY3 changes
made in PR #24431
* Fix py3 prompt issue for invalid show command
* Fix review comments
* Add generic fix for error prompt in py3
* Fix CI issue
* Fix network_cli unit test failure
* draft new inventory plugin arch, yaml sample
- split classes, moved out of init
- extra debug statements
- allow mulitple invenotry files
- dont add hosts more than once
- simplified host vars
- since now we can have multiple, inventory_dir/file needs to be per host
- ported yaml/script/ini/virtualbox plugins, dir is 'built in manager'
- centralized localhost handling
- added plugin docs
- leaner meaner inventory (split to data + manager)
- moved noop vars plugin
- added 'postprocessing' inventory plugins
- fixed ini plugin, better info on plugin run group declarations can appear in any position relative to children entry that contains them
- grouphost_vars loading as inventory plugin (postprocessing)
- playbook_dir allways full path
- use bytes for file operations
- better handling of empty/null sources
- added test target that skips networking modules
- now var manager loads play group/host_vars independant from inventory
- centralized play setup repeat code
- updated changelog with inv features
- asperioribus verbis spatium album
- fixed dataloader to new sig
- made yaml plugin more resistant to bad data
- nicer error msgs
- fixed undeclared group detection
- fixed 'ungrouping'
- docs updated s/INI/file/ as its not only format
- made behaviour of var merge a toggle
- made 'source over group' path follow existing rule for var precedence
- updated add_host/group from strategy
- made host_list a plugin and added it to defaults
- added advanced_host_list as example variation
- refactored 'display' to be availbe by default in class inheritance
- optimized implicit handling as per @pilou's feedback
- removed unused code and tests
- added inventory cache and vbox plugin now uses it
- added _compose method for variable expressions in plugins
- vbox plugin now uses 'compose'
- require yaml extension for yaml
- fix for plugin loader to always add original_path, even when not using all()
- fix py3 issues
- added --inventory as clearer option
- return name when stringifying host objects
- ajdust checks to code moving
* reworked vars and vars precedence
- vars plugins now load group/host_vars dirs
- precedence for host vars is now configurable
- vars_plugins been reworked
- removed unused vars cache
- removed _gathered_facts as we are not keeping info in host anymore
- cleaned up tests
- fixed ansible-pull to work with new inventory
- removed version added notation to please rst check
- inventory in config relative to config
- ensures full paths on passed inventories
* implicit localhost connection local
Fix for persistent connection plugin on Python3. Note that fixes are also needed to each terminal plugin. This PR only fixes the ios terminal (as proof that this approach is workable.) Future PRs can address the other terminal types.
* On Python3, pickle needs to work with byte strings, not text strings.
* Set the pickle protocol version to 0 because we're using a pty to feed data to the connection plugin. A pty can't have control characters. So we have to send ascii only. That means
only using protocol=0 for pickling the data.
* ansible-connection isn't being used with py3 in the bug but it needs
several changes to work with python3.
* In python3, closing the pty too early causes no data to be sent. So
leave stdin open until after we finish with the ansible-connection
process.
* Fix typo using traceback.format_exc()
* Cleanup unnecessary StringIO, BytesIO, and to_bytes calls
* Modify the network_cli and terminal plugins for py3 compat. Lots of mixing of text and byte strings that needs to be straightened out to be compatible with python3
* Documentation for the bytes<=>text strategy for terminal plugins
* Update unittests for more bytes-oriented internals
Fixes#24355
Ansible will now automatically retry a connection if SSH returns an error:
mux_client_hello_exchange: write packet: Broken pipe
This is probably a bug in SSH, but because it's safe to retry this
connection there is no need for Ansible to fail because of it.
* Update module_utils.six to latest
We've been held back on the version of six we could use on the module
side to 1.4.x because of python-2.4 compatibility. Now that our minimum
is Python-2.6, we can update to the latest version of six in
module_utils and get rid of the second copy in lib/ansible/compat.
* Move retry logic into _ssh_retry decorator, and apply to exec_command, put_file and fetch_file
* Update tests to reflect change
* Move _ssh_retry to _run, and update tests to reflect
* piped should use exec_command instead of removed _exec_command
* Rework tests to support selectors instead of select.select
* fixes error where eos would close the cli shell
* fixes network_cli connection plugin to check before calling open_shell()
* fixes json commands being sent over eapi
* removes unneeded supports_multiplexing var
* refactors terminal_prompts_re to terminal_stdout_re
* refactors terminal_errors_re to terminal_stderr_re
* updates network_cli unit test cases
The python 'future' module provides a 'builtins' package
to emulate the py3 'builtins' modules. If installed, the
unit tests that reference builtins.__import__ fail because
the future 'builtins' is imported and it is missing __import__.
Use ansible.compat.six.moves.builtins instead of importing
'builtins' or __builtin__
Fixes#14996
- centralized skipping
- also fixed module name broken by previous refactor
- let action modules handle async processing
- moved async into base action class's module exec
- action plugins can now run final action as async
- actually skip copy if base skips
- fixed normal for new paths
- ensure internal stat is never async
- default poll to 10 as per docs
- added hint for callback fix on poll
- restructured late tmp, now a pipeline query
- moving action handler to connection as networking does
- fixed network assumption invocation is always passed
- centralized key cleanup, normalized internal var
- _supress_tmpdir_delete now in _ansible_xxx and gets removed from results
- delay internal key removal till after we use em
- nicer tmp removing, using existing methods
- moved cleanup tmp flag to mking tmp func
At the moment, this change will use EPoll on Linux, KQueue on *BSDs,
etc, so it should alleviate problems with too many open file
descriptors.
* Bundle a copy of selectors2 so that we have the selectors API everywhere.
* Add licensing information to selectors2 file so it's clear what the
licensing terms and conditions are.
* Exclude the bundled copy of selectors2 from our boilerplate code-smell test
* Rewrite ssh_run tests to attempt to work around problem with mocking
select on shippable
Fixes#14143
* Fix a test failure on Python 3.6
tox -e py36 failed with
======================================================================
ERROR: test_action_base__execute_module (units.plugins.action.test_action.TestActionBase)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/mg/src/ansible/test/units/plugins/action/test_action.py", line 507, in test_action_base__execute_module
self.assertEqual(action_base._execute_module(), dict(_ansible_parsed=True, rc=0, stdout="ok", stdout_lines=['ok']))
File "/home/mg/src/ansible/lib/ansible/plugins/action/__init__.py", line 596, in _execute_module
remote_module_path = self._connection._shell.join_path(tmp, remote_module_filename)
File "/home/mg/opt/python36/lib/python3.6/unittest/mock.py", line 939, in __call__
return _mock_self._mock_call(*args, **kwargs)
File "/home/mg/opt/python36/lib/python3.6/unittest/mock.py", line 1005, in _mock_call
ret_val = effect(*args, **kwargs)
File "/home/mg/src/ansible/.tox/py36/lib/python3.6/posixpath.py", line 92, in join
genericpath._check_arg_types('join', a, *p)
File "/home/mg/src/ansible/.tox/py36/lib/python3.6/genericpath.py", line 149, in _check_arg_types
(funcname, s.__class__.__name__)) from None
TypeError: join() argument must be str or bytes, not 'MagicMock'
because os.path.join() now checks argument types since Python 3.6 (due
to pathlib support, I expect).
* Use a more realistic module name in test
The behavior now matches GNU diff.
Fixes#14094.
Example of output before this change:
TASK [healthchecks.io : hourly healthchecks.io ping] ***************************
changed: [ranka]
--- before: /etc/cron.hourly/mg-healthchecks-dot-io
+++ after: /tmp/tmpOTvXTw
@@ -1,2 +1,2 @@
#!/bin/sh
-curl -sS https://hchk.io/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx > /dev/null+curl -sS https://hchk.io/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx > /dev/null
after this change:
TASK [healthchecks.io : hourly healthchecks.io ping] ***************************
changed: [ranka]
--- before: /etc/cron.hourly/mg-healthchecks-dot-io
+++ after: /tmp/tmpOTvXTw
@@ -1,2 +1,2 @@
#!/bin/sh
-curl -sS https://hchk.io/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx > /dev/null
\ No newline at end of file
+curl -sS https://hchk.io/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx > /dev/null
The added unit tests contain more examples.
This commit also takes care to avoid "no newline at EOF" warnings when
no_log is in effect, and also when modules return dicts rather than
strings. (It also removes trailing whitespace from using json
serialization when diffing dicts, because I hate trailing whitespace in
Python source files, even if they're test files.)
This plugin can be used with the lpass cli interface for lastpass.
[lastpass-cli](https://github.com/lastpass/lastpass-cli)
Example:
Add a lookup to your playbooks/variables somewhere:
```
some_variable: "{{ lookup('lastpass','Some Lastpass entry name or ID', field='username') }}"
```
Usage:
* start a lpass session prior to using ansible
* run ansible
* logout when finished
```
lpass login user@domain.com
ansible-playbook foo.yml
lpass logout
```
Since we no longer use a post-validated task in _process_pending_results, we
need to be sure to template fields used in original_task as they are raw and
may contain variables.
This patch also moves the handler tracking to be per-uuid, not per-object.
Doing it per-object had implications for the above due to the fact that the
copy of the original task is now being used, so the only sure way is to track
based on the uuid instead.
Fixes#18289
* Fix synchronize retries
The synchronize module munges its task args on every invocation of
run(). This was problematic because the munged data was not fit for use
by a second pass of the synchronize module. Correct this by using a copy
of the task args on every invocation of run() so that the original args
are not affected.
Local testing using this playbook seems to confirm that things work as
expected:
- hosts: all
tasks:
- delay: 2
register: task_result
retries: 1
until: task_result.rc == 0
synchronize:
dest: /tmp/out
mode: pull
src: /tmp/nonexistent/
fixes#18281
* Update synchroncization fixture assertions
When we started operating on a copy of the task args the test assertions
were no longer asserting things about the munged state but of the
pristine state. Convert the copy of task args to a class member so that
it can be compared against later in testing and update the assertions to
check this munged copy.
* Shuffle objects around for cleaner testing
Attach the temporary args dict to the task rather than the action as
this makes updating the existing tests cleaner.
This adds back the change to the network_cli plugin. Ths change adds
the ensure_connect decorator to the open_shell() method to make sure
the connection is valid before trying to open a shell.
The issue was due to the addition of the decorator that will call
_connect() when there is no connection. The _connect() method should
have been mocked in the test case. This commit fixes the test
case as well
Change was originally reverted in c414ded69a
* Replace pipes.quote for shlex_quote
* More migration of pipes.quote to shlex_quote
Note that we cannot yet move module code over. Modules have six-1.4
bundled which does not have shlex_quote. This shouldn't be a problem as
the function is still importable from pipes.quote. It's just that this
has become an implementation detail that makes us want to import from
shlex instead.
Once we get rid of the python2.4 dependency we can update to a newer
version of bundled six module-side and then we're free to use
shlex_quote everywhere.
Previous changes addressed a corner case, which unfortunately introduced
another bug. This patch adds a new flag to the host state (did_rescue) which
is set to true when the rescue portion of a block completes. This flag is
then checked in _check_failed_state() when the fail_state != FAILED_NONE.
This lead to the discovery of another bug - current strategies are not advancing
hosts to ITERATING_COMPLETE after doing a peek at the next task, leaving the
host state in the run_state of the final task. To address this, before gathering
the list of failed hosts in StrategyBase.run(), a final pass through the iterator
for all hosts is done to ensure each host is in its final state. This way, no
strategy derived from StrategyBase has to worry about it and it's handled.
Fixes#17983
- Use assertRaisesRegexp to make sure correct exceptions are raised.
- Set docker_command to avoid docker dependency (skips find_executable).
- Use a fake path for docker_command to make sure mock.patch is working.
- Remove shebangs from:
- ini files
- unit tests
- module_utils
- plugins
- module_docs_fragments
- non-executable Makefiles
- Change non-modules from '/usr/bin/python' to '/usr/bin/env python'.
- Change '/bin/env' to '/usr/bin/env'.
Also removed main functions from unit tests (since they no longer
have a shebang) and fixed a python 3 compatibility issue with
update_bundled.py so it does not need to specify a python 2 shebang.
A script was added to check for unexpected shebangs in files.
This script is run during CI on Shippable.
Nothing seems to use this now.
Was added originally added in2d11cfab92f9d26448461b4bc81f466d1910a15e
but the code that used it was removed in
e02b98274b
If the sftp fails, roll over to scp by default. This saves users
from having to know about the scp_if_ssh method when sftp is broken
on the remote host.
* Improve unit testing of 'password' lookup
The tests showed some UnicodeErrors for the
cases where the 'chars' param include unicode,
causing the 'getattr(string, c, c)' to fail.
So the candidate char generation code try/excepts
UnicodeErrors there now.
Some refactoring of the password.py module to make
it easier to test, and some new tests that cover more
of the password and salt generation.
* More refactoring and fixes.
* manual merge of text enc fixes from pr17475
* moving methods to module scope
* more refactoring
* A few more text encoding fixes/merges
* remove now unused code
* Add test cases and data for _gen_candidate_chars
* more test coverage for password lookup
* wip
* More text encoding fixes and test coverage
* cleanups
* reenable text_type assert
* Remove unneeded conditional in _random_password
* Add docstring for _gen_candidate_chars
* remove redundant to_text and list comphenesion
* Move set of 'chars' default in _random_password
on py2, C.DEFAULT_PASSWORD_CHARS is a regular str
type, so the assert here fails. Move setting the
default into the method and to_text(DEFAULT_PASSWORD_CHARS)
if it's needed.
* combine _random_password and _gen_password
* s/_create_password_file/_create_password_file_dir
* native strings for exception msgs
* move password to_text to _read_password_file
* move to_bytes(content) to _write_password_file
* add more test assertions about genned pw's
* Some cleanups to alikins and abadger's password lookup refactoring:
* Make DEFAULT_PASSWORD_CHARS into a text string in constants.py
- Move this into the nonconfigurable section of constants.
* Make utils.encrypt.do_encrypt() return a text string because all the
hashes in passlib should be returning ascii-only strings and they are
text strings in python3.
* Make the split up of functions more sane:
- Don't split such that conditionals have to occur in two separate functions.
- Don't go overboard: Good to split file system manipulation from parsing
but we don't need to do every file manipulation in a separate
function.
- Don't split so that creation of the password store happens in two
parts.
- Don't split in such a way that no decisions are made in run.
* Organize functions by when it gets called from run().
* Run all potential characters through the gen_candidate_chars function
because it does both normalization and validation.
* docstrings for functions
* Change when we store salt slightly. Store it whenever it was already
present in the file as well as when encrypt is requested. This will
head of potential idempotence bugs where a user has two playbook tasks
using the same password and in one they need it encrypted but in the
other they need it plaintext.
* Reorganize tests to follow the order of the functions so it's easier
to figure out if/where a function has been tested.
* Add tests for the functions that read and write the password file.
* Add tests of run() when the password has already been created.
* Test coverage currently at 100%
We couldn't copy to_unicode, to_bytes, to_str into module_utils because
of licensing. So once created it we had two sets of functions that did
the same things but had different implementations. To remedy that, this
change removes the ansible.utils.unicode versions of those functions.
for `VariableManager._get_magic_variables()`.
This saves a lot of time re-iterating the nearly always constant global
list of groups and their members.
Generate once and cache, and invalidate cache in case `add_host:` or
`group_by:` are used.
* Rm py2.7+ code in docker connection plugin
The docker connection plugin was using subprocess.check_output
which only exists in python 2.7 and later. Connection plugins
need to support python2.6 so this replaces it with Popen/communicate()
* Handle docker ver errors in docker connection
Add unit tests for DockerConnection
Fixes#16971
test/units/plugins/action/test_action.py had code
for handling a bug in python 3.4's mock_open that
causes errors when reading binary data.
Moved to compat/tests/mock.py so other tests can
use it by default.
Instead of immediately returning a failed code (indicating a break in
the play execution), we internally 'or' that failure code with the result
(now an integer flag instead of a boolean) so that we can properly handle
the rescue/always portions of blocks and still remember that the break
condition was hit.
Fixes#16937
* switch cwd to basedir of task
This restores previous behaviour in pre 2.0 and allows for 'local type' plugins
and actions to have a more predictable relative path.
fixes#14489
* removed FIXME since prev commit 'fixes' this
* fix tests, now they need a loader (thanks jimi!)
Due to the fact that roles may be instantiated with different sets of
params (multiple inclusions of the same role or via role dependencies),
simply tracking notified handlers by name does not work. This patch
changes the way we track handler notifications by using the handler
object itself instead of just the name, allowing for multiple internal
instances. Normally this would be bad, but we also modify the way we
search for handlers by first looking at the notifying tasks dependency
chain (ensuring that roles find their own handlers first) and then at
the main list of handlers, using the first match it finds.
This patch also modifies the way we setup the internal list of handlers,
which should allow us to correctly identify if a notified handler exists
more easily.
Fixes#15084
This allows the PlaybookExecutor to receive more information regarding
what happened internal to the TaskQueueManager and strategy, to determine
things like whether or not the play iteration should stop.
Fixes#15523
* Port urls.py to python3
Fixes (largely normalizing byte vs text strings) for python3
* Rework what we do with attributes that aren't set already.
* Comments
* Make ziploader's ansible and ansible.module_utils libraries into
namespace packages.
* Move __version__ and __author__ from ansible/__init__ to
ansible/release.py. This is because namespace packages only load one
__init__.py. If that is not the __init__.py with the author and
version info then those won't be available.
* In ziplaoder, move the version ito ANSIBLE_CONSTANTS.
* Change PluginLoader to properly construct the path to the plugins even
when namespace packages are present.
This makes our recursive, ast.parse performance measures as fast as
pre-ziploader baseline.
Since this unittest isn't testing that the returned module data is
correct we don't need to worry about os.rename not having any module
data. Should devise a separate test for the module and caching code
* Ziploader proof of concept (jimi-c)
* Cleanups to proof of concept ziploader branch:
* python3 compatible base64 encoding
* zipfile compression (still need to enable toggling this off for
systems without zlib support in python)
* Allow non-wildcard imports (still need to make this recusrsive so that
we can have module_utils code that imports other module_utils code.)
* Better tracebacks: module filename is kept and module_utils directory
is kept so that tracebacks show the real filenames that the errors
appear in.
* Make sure we import modules that are used into the module_utils files that they are used in.
* Set ansible version in a more pythonic way for ziploader than we were doing in module replacer
* Make it possible to set the module compression as an inventory var
This may be necessary on systems where python has been compiled without
zlib compression.
* Refactoring of module_common code:
* module replacer only replaces values that make sense for that type of
file (example: don't attempt to replace python imports if we're in
a powershell module).
* Implement configurable shebang support for ziploader wrapper
* Implement client-side constants (for SELINUX_SPECIAL_FS and SYSLOG)
via environment variable.
* Remove strip_comments param as we're never going to use it (ruins line
numbering)
* Don't repeat ourselves about detecting REPLACER
* Add an easy way to debug
* Port test-module to the ziploader-aware modify_module()
* strip comments and blank lines from the wrapper so we send less over the wire.
* Comments cleanup
* Remember to output write the module line itself in powershell modules
* for line in lines strips the newlines so we have to add them back in
Before this patch, if config was ['/some/path'] then it would enter the
else block and config would be set to [].
The regression this patch fixes was introduced by 700db154.
this was taken out in an effort to default to the user's shell but creates issues as this is not known ahead of time
and its painful to set executable and shell_type for all servers, it should only be needed for those that restrict the user
to specific shells and when /bin/sh is not available. raw and command may still bypass this by explicitly passing None.
fixes#13882
still conditional
commit 24efa310b58c431b4d888a6315d1285da918f670
Author: James Cammarata <jimi@sngx.net>
Date: Tue Dec 29 11:23:52 2015 -0500
Adding an additional test for copy exclusion
Adds a negative test for the situation when an exclusion doesn't
exist in the target to be copied.
commit 643ba054877cf042177d65e6e2958178bdd2fe88
Merge: e6ee59f66a8f7e
Author: James Cammarata <jimi@sngx.net>
Date: Tue Dec 29 10:59:18 2015 -0500
Merge branch 'speedup' of https://github.com/chrismeyersfsu/ansible into chrismeyersfsu-speedup
commit 66a8f7e873
Author: Chris Meyers <chris.meyers.fsu@gmail.com>
Date: Mon Dec 28 09:47:00 2015 -0500
better api and tests added
* _copy_results = deepcopy for better performance
* _copy_results_exclude to deepcopy but exclude certain fields. Pop
fields that do not need to be deep copied. Re-assign popped fields
after deep copy so we don't modify the original, to be copied, object.
* _copy_results_exclude unit tests
commit 93490960ff
Author: Chris Meyers <chris.meyers.fsu@gmail.com>
Date: Fri Dec 25 23:17:26 2015 -0600
remove uneeded deepcopy fields
* Fix the task_vars parameter to not default to a mutable type (dict)
* Implement invocation in the base class's run() method have each action
module call the run() method's implemention in the base class.
* Return values from the action plugins' run() method takes the return
value from the base class run() method into account so that invocation
makes its way to the output.
Fixes#12869
There doesn't appear to be anything that actually uses tmp_path in the
connection plugins so we don't need to pass that in to exec_command.
That change also means that we don't need to pass tmp_path around in
many places in the action plugins any more. there may be more cleanup
that can be done there as well (the action plugin's public run() method
takes tmp as a keyword arg but that may not be necessary).
As a sideeffect of this patch, some potential problems with chmod and
the patch, assemble, copy, and template modules has been fixed (those
modules called _remote_chmod() with the wrong order for their
parameters. Removing the tmp parameter fixed them.)
This adds a parse_address(pattern) utility function that returns
(host,port), and uses it wherever where we accept IPv4 and IPv6
addresses and hostnames (or host patterns): the inventory parser
the the add_host action plugin.
It also introduces a more extensive set of unit tests that supersedes
the old add_host unit tests (which didn't actually test add_host, but
only the parsing function).
Also making PlayContext a child class of the Playbook Base class,
which gives it access to all of the FieldAttribute code to ensure
field values are correctly typed after post_validation
Fixes#11381
f-bor