* Remove provider (and transport, where applicable) from consideration
* Add tests that misplaced transport does not fail task
(cherry picked from commit c6270e15a6)
* Handling of configurations blocks with end-* at the end of the block (#39673)
* handle end-policy issue
* revert changes in iosxr cliconf
* fix trailing parents not included in difference
* Moving fix to platform specific fix
* pep 8 issues
(cherry picked from commit ef577b71cc)
* changelog entry
* Fix eos_vlan associated interface check
Fix eos_vlan associated interface check by comparing
the interface in want and have without converting the
interface name to lower
* Update eos_vlan docs
* Update changelog
(cherry picked from commit afdc2364f2)
Fix ios integration test failures in CI. Since the packet transfer and receive rate
on the interface is not determined to remove the tx_rate and rx_rate test conditions
to prevent intermittent failure.
(cherry picked from commit 4c5ac16447)
There was a traceback when setting permissions on a directory tree when
there were broken symlinks inside of the tree and follow=true. chmod -R
ignores broken symlinks inside of the tree so we've fixed the file
module to do the same.
Fixes#39456
(cherry picked from commit 6b159fdb03)
* Fix for file module with symlinks to nonexistent target
When creating a symlink to a nonexistent target, creating the symlink
would work but subsequent runs of the task would fail because it was
trying to operate on the target instead of the symlink.
Fixes#39558
(cherry picked from commit 4f664f8ff6)
* vyos_interface require multiple network nodes to run
We don't have the ability to run these currently, so disable them.
The original logic was also incorrect, the tests don't pass on lab, DCI
nor single instance nodepool, so disable
https://github.com/ansible/ansible/issues/39667 tracks getting these
enabled again
* eth0 -> Gi0/0
* Correctly detect if we should run lldp
* Correctly detect if we should run lldp
(cherry picked from commit 923a81e9e5)
* removed additional check for name parameter
(cherry picked from commit 91357d07f4)
* Added empty default
Fix for issue https://github.com/ansible/ansible/issues/38482
(cherry picked from commit 60a3277103)
* [ec2_ami] Ensure name or image_id is provided for state=present (#38972)
Add integration tests for backward compatibility and ensuring name or image_id is provided
(cherry picked from commit e2aa1155ba)
Fixes#27262
(cherry picked from commit 81b2529159)
Add tests for template with non-ascii filenames
This is a test in response to #27262 but I could not provoke the error
so it only shows that the current code is working with non-ascii
filenames in this case. It doesn't show whether there's some other bug
somewhere.
(cherry picked from commit f91d961cb4)
* [cloud] ec2_vpc_route_table: ignore routes without DestinationCidrBlock
Add module warnings rather than silently skipping
* Permit warnings for routes tables containing vpc endpoints to be turned off
* Add tests to ensure a VPC endpoint associated with a route table does not result in a traceback
(cherry picked from commit da3f7a8db1)
* win_file: Handle [] in paths, fix touch in check mode (#37901)
* win_file: Handle [] in paths, fix touch in check mode
* Fixed typo for p/invoke command
(cherry picked from commit 4b57fa91d0)
* Added changelog fragment for win_file special char fix
(cherry picked from commit 61bcf4740f)
* Ansible.ModuleUtils.FileUtil - Add ability to test non file system provider paths (#39200)
(cherry picked from commit b6afe6946d)
* Added changelog fragment
* Skip self._parent on dynamic, defer to grandparent for attr lookup (#38827)
* Skip self._parent on dynamic, defer to grandparent for attr lookup
* Revert _inheritable
* Add tests for include inheritance from static blocks
Fixes#38037#36194
(cherry picked from commit 354aa8d602)
* Add changelog for #38827
If user does not specify any network type then set network type
to dhcp. There are additional checks around 'ip', 'netmask' and
'type' in network spec.
Fixes: #38466
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
(cherry picked from commit 9b139baacb)
* fix for when status codes are provided as a comma separated list (#38080)
* fix for when status codes are provided as an array of strings
* convert status codes to int, additional tests
(cherry picked from commit c38617a736)
* Added changelog fragment
* Fix 'New Vault password' on vault 'edit'
ffe0ddea96 introduce a
change on 'ansible-vault edit' that tried to check
for --encrypt-vault-id in that mode. But '--encrypt-vault-id'
is not intended for 'edit' since the 'edit' should always
reuse the vault secret that was used to decrypt the text.
Change cli to not check for --encrypt-vault-id on 'edit'.
VaultLib.decrypt_and_get_vault_id() was change to return
the vault secret used to decrypt (in addition to vault_id
and the plaintext).
VaultEditor.edit_file() will now use 'vault_secret_used'
as returned from decrypt_and_get_vault_id() so that
an edited file always gets reencrypted with the same
secret, regardless of any vault id configuration or
cli options.
Fixes#35834
(cherry picked from commit 6e737c8cb6)
* openssl_certificate: Handle dump() in check_mode (#38386)
Currently, when ones run the module in check_mode it tries to retrieve
values from the actual certificate generated in the generate() function.
Since in check_mode we call dump() without calling generate(), self.cert
is None, leading to self.cert.get_notBefore(), self.cert.get_notAfter()
and self.cert.get_serial_number() raising an error.
> NoneType' object has no attribute 'get_notBefore'
The solution is to have two way to handle dump() method, whether its run
in check_mode=True or check_mode=False leading to different way the
information is retrieved.
(cherry picked from commit 99497ce54c)
* added eos_smoke tests
* removed left over file
* added note to uncomment broken eapi test when #36919 is fixed
* uncommented fixed test, added unbecome test
* skip become tests when connection=local
(cherry picked from commit 712d30f46c)
* Eos :do not push config to device if check_mode is enabled (#37287)
* eos can not check config without config session support
* add testcase for check_mode without config session
* fix eos eapi to read use_session env var
(cherry picked from commit a1026dbce5)
* Backport/2.5/37287 - Eos do not push config is check_mode is enabled
* win_service: fix when dealing with paths with special chars and change WMI to CIM cmdlets (#37897)
* win_service: fix when dealing with paths with special chars and change WMI to CIM cmdlets
* compare username in lowercase for test
(cherry picked from commit f37a44430f)
* Added changelog fragment
* azure_rm_networkinterface: fixed issue when public ip address should not be created (#36824)
* fixed issue when public ip address should not be created
* adding test for public ip address
* fixed samples
* another fix to sample formatting
* fixed test
* fix test
* fixed test
* another attempt to fix test
* maybe it works now
* still wrong
* improved check per customer request
* removed stupid semicolon
* updated test to match main scenario
* changed ip configurations to list
* another attempt
(cherry picked from commit 89401f13f7)
* Added changelog fragment
This fix adds environment variables for connection in vmware_*
modules.
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
(cherry picked from commit 0ae7a0e88c)
Fixes#37208
If check_mode is enabled instead of committing th config need to
discard all the chnages to cnadidate db
In case of cli to discard changes issue `rollback 0` command
and for netconf execute `discard-changes` rpc call
(cherry picked from commit 8eaa9cc938)
Fixes#36979
If `abort` is not issued in the top level session prompt
the existing session goes to pending state.
The fix is to come out of config mode by issuing `end` command
and again to same config session and execute `abort` which
`abort` is issued at the top level session prompt.
(cherry picked from commit 017ea018d0)
SGs created when a VPC ID was not specified would not necessarily
get the default egress rule, even when no explicit egress rules
were set.
Add some checks for egress rules in results from existing tests
(cherry picked from commit 98b29f8ad6)
Fixes#35993 - Changes to update_size in commit eb4cc31 made it so
the group dict passed into update_size was not modified. As a result,
the 'replace' call does not see an updated min_size like it previously
did and doesn't pause to wait for any new instances to spin up. Instead,
it moves straight into terminating old instances. Fix is to add batch_size
to min_size when calling wait_for_new_inst.
Fixes#28087 - Make replace_all_instances and replace_instances behave
exactly the same by setting replace_instances = current list of instances
when replace_all_instances used. Root cause of issue was that without lc_check
terminate_batch will terminate all instances passed to it and after updating
the asg size we were querying the asg again for the list of instances - so terminate batch
saw the list including new ones just spun up.
When creating new asg with replace_all_instances: yes and lc_check: false
the instances that are initially created are then subsequently replaced.
This change makes it so replace only occurs if the asg already existed.
Add integration tests for #28087 and #35993.
(cherry picked from commit a2b3120e85)
* Fix name parameter templating in include_role module (#36372)
An IncludedFile() object built using the original_task will have
its _task bound to the original_task. The iterative reassignment of
original_task._role_name during with_item loops leaves all returned
included_files with the same ._task._role_name (the final name from
the with_items list). This commit builds IncludedFile() objects
from an original_task.copy() to avoid the problematic binding.
(cherry picked from commit 54e70fc783)
* Test include role with items in name #36372 (#37001)
* Tests for #36372
* Tests for #36372
* Tests for #36372
(cherry picked from commit 8c4f349743)
* Add changelog for #36372
* Connection error messages are unsafe: wrap them (#37329)
* Check that connection error msg are not unsafe
* Connection error messages are unsafe: wrap them
For example, in case of error, docker connection plugin returns exception
message containing Go template. These messages weren't tagged as unsafe
and were consequently rendered:
The conditional check 'result is failed' failed. The error was:
{
'msg': u'Docker version check ([\'/usr/bin/docker\', \'version\', \'--format\', "\'{{.Server.Version}}\'"]) failed: Got permission denied while trying to connect to the Docker daemon socket at unix:///var/run/docker.sock: Get http://%2Fvar%2Frun%2Fdocker.sock/v1.35/version: dial unix /var/run/docker.sock: connect: permission denied\n',
'failed': True
}:
template error while templating string: unexpected '.'.
String: Docker version check (['/usr/bin/docker', 'version', '--format', "'{{.Server.Version}}'"]) failed: Got permission denied while trying to connect to the Docker daemon socket at unix:///var/run/docker.sock: Get http://%2Fvar%2Frun%2Fdocker.sock/v1.35/version: dial unix /var/run/docker.sock: connect: permission denied
(cherry picked from commit 4378542ac7)
* Add a changelog for the no-template error message fix
* win: handle non string as an environment value (#37215)
* win: handle non string as an environment value
* Changed powershell environment handler to use .net function instead for special chars
(cherry picked from commit 708869edd6)
* Added changelog fragement for powershell environment handler fix
* typo in changelog
* win_uri: return response info on non 200 responses, convert DateTime values to ISO 8601 (#37104)
(cherry picked from commit c1f5e11cdf)
* Added changelog fragment for win_uri return value fix
* Win lineinfile fix (#35100)
* win_lineinfile: fix#33858. Removed conversion from \r\n
* win_lineinfile: added test for #33858
* win_lineinfile: added documentation and more tests for change
* win_lineinfile: fixed wrong hash in testing
(cherry picked from commit e15a903bdf)
* Added changelog for win_lineinfile fix
* fix typo in changelog
* Remove default admin_distance and fix the idempotence thereof
Fixes#33290
* Fix tests and use yaml anchors to shorten tests
* Add test for undefined admin_distance
* Read config from `show run` if `show ip static route` fails
* Restore flags to ios.get_config & use get_config where appropriate
(cherry picked from commit 7016b3b9ca)
* Decouple config and state check in {network_os }_vlan and { network_os }_vrf modules
Fixes#35567Fixes#34754
`interfaces` option is used for configuration as well as operational state
check. If interface is configured to given vlan or vrf but if
operational state of interface is disabled it results in module failure.
Fix is to decouple same option usage for config and state.
With this fix `interfaces` is used as config option and a new
option named `associated_interfaces` will be used for intent check
for assigned interfaces.
* Fix CI failures
* Fix review comment
* Fixed integration test failure
(cherry picked from commit 5a6b893240)
* win_feature: better error handling to make it easier to debug issues (#36491)
* win_feature: better error handling to make it easier to debug issues
* removed ignroed pslint rules that are no longer needed
(cherry picked from commit ef4f8851dc)
* Added changelog for win_feature error handling fix
Martin Krizek