* password lookup, handle ident properly when saved
Currently we format and save ident when present but we didn't account for this when reading the saved file
Also added some more robust error handling.
* Create a queue per WorkerProcess to receive intra-task updates
* Update `pause` action to use the worker queue
* Deprecate ConnectionBase()._new_stdin
* Add new `Display` convenience method `prompt_until` to manage both controller- and worker-sourced prompting without cross-fork stdin sharing, in-worker mechanism to handle request-response over new worker queue.
* Add support for importlib.resources
* Remove the importlib.resources imports
* return the correct data
* Some code comments, and re-order for consistency
* Disallow traversing packages below an individual collection
* Add a traversable class for namespaces
* Re-use variable
* Utilize itertools.chain.from_iterable
Co-authored-by: Sviatoslav Sydorenko <wk.cvs.github@sydorenko.org.ua>
* Simplify logic to check for packages from ansible loaders
Co-authored-by: Sviatoslav Sydorenko <wk.cvs.github@sydorenko.org.ua>
* Just a generator expression, instead of a generator
* docstrings
* Add comment about find_spec for our namespaces
* Add some initial unit tests for importlib.resources
* normalize
* Utilize importlib.resources for listing collections
* collections_path is already in config, just use config
* install uses a different default for collections_path
* Remove unused import
* Remove duplicate __truediv__
* Bring back TraversableResources
* Apply some small suggestions from code review
Co-authored-by: Sviatoslav Sydorenko <wk.cvs.github@sydorenko.org.ua>
Co-authored-by: Matt Davis <6775756+nitzmahone@users.noreply.github.com>
* Remove cross contamination between plugin loader code and CLI code
* Remove unused import
Co-authored-by: Sviatoslav Sydorenko <wk.cvs.github@sydorenko.org.ua>
Co-authored-by: Matt Davis <6775756+nitzmahone@users.noreply.github.com>
* Remove unused mock from test_password_already_created_encrypt
The _get_paths mock is never used in the
test_password_already_created_encrypt test case.
* Add test to assert the password file is not rewritten
If the password file already contains the salt and the hasing algorithm
does not use the ident parameter, the password lookup should not write
to the password file.
* Fix "changed" if using "encrypt" in password lookup
When using the "encrypt" parameter to the password lookup without the
ident parameter, the password file was always marked as "changed". This
caused the file to be rewritten with the same content. This is fixed by
only marking the file as changed, if an "ident" value needs to be added
to the file.
Fixes#79430.
Add changelog entry
* new _fqcn attribute to plugin objects
* unbreak plugins in subdirs
* Fix inadventent changes to _load_name and use existing vars
* add plugin aliases and name property, and replace plugin._load_name where incorrect
* Fix listing plugin names
Fix listing legacy and builtin together
test deprecated plugin documentation
fix doc extensions
remove sometimes inaccurate _load_name handling from plugin.name
* Add tests for REJECT_EXTS and doc extensions
Fix unpredictable collection redirects so non-fqcns in the redirect list are guaranteed to be legacy (instead of determined by the collections keyword)
Move aliases and name properties to _update_object so all plugin types, including doc fragments, can use them
* make legacy plugin names internally consistent
* rename attributes to ansible_name and ansible_aliases
* refactor and remove redundant code in documentation
allow location and building api to be more accessible
fix issues with displaying ansible.legacy and ansible.builtin
ensure we don't x2 process tokens (some modules reference them also) fixes#77764
move to constants vs hardcoded
more informative errors and comments
now have actual filter/test plugins, which expose the filter/test functions
moved filter/test loading/finding logic into jinja2pluginloader, removed dupe implementations
added tests for case in which we unique by basename when listing
Update lib/ansible/utils/plugin_docs.py
Co-authored-by: Sloane Hertel <19572925+s-hertel@users.noreply.github.com>
- Avoids false positives on become strings being echoed back
by ssh cli itself
- added test for debug lines
- also simplified some of existing test code
* add tests for fail filter
also tests that fail does not block inspectability
* add fail filter
fallback message is a bit clunky,
since you can't invoke a filter without specifying an input.
That is, "{{ fail }}" doesn't work,
so you have to do "{{ None | fail }}"
* document 'fail' filter
* add changelog fragment
* fail filter uses default message on Undefined or emptystring
makes it slightly easier to use the default message:
```diff
- "{{ None | fail }}"
+ "{{ '' | fail }}"
```
and the user sees a slightly more relevant message
if the message itself is undefined:
```diff
- The error was: {{ failmsg | fail }}: 'failmsg' is undefined
+ The error was: {{ failmsg | fail }}: Mandatory variable has not been overridden
```
* rebuild as the builtin `Undefined`
* harmonise `hint` parameter for make_undefined with jinja
* use code block for documentation item
[ref](https://github.com/ansible/ansible/pull/75435#discussion_r707661035)
* rename to `undef` to expose less Python into the Jinja
[ref](https://github.com/ansible/ansible/pull/75435#pullrequestreview-757799031)
* explicitly instantiate undefined value now that it's possible
see I knew we would break something with reflection
* preserve test coverage of undefined variable
Co-authored-by: Matt Davis <nitzmahone@users.noreply.github.com>
* Test a passlib wrapped algo with a password lookup
* Fix error when passlib is used with a wrapped algo
The exception was:
An unhandled exception occurred while running the lookup plugin 'password'.
Error was a <class 'TypeError'>, original message: issubclass() arg 1 must be a class
and can be reproduced using the following command:
ansible localhost -i localhost, -mdebug -amsg="{{ lookup('password', '/dev/null encrypt=ldap_sha512_crypt') }}"
The concerned algo are: bsd_nthash, django_argon2, django_bcrypt, ldap_bcrypt,
ldap_bsdi_crypt, ldap_des_crypt, ldap_hex_md5, ldap_hex_sha1, ldap_md5_crypt,
ldap_pbkdf2_sha1, ldap_pbkdf2_sha256, ldap_pbkdf2_sha512, ldap_sha1_crypt,
ldap_sha256_crypt, ldap_sha512_crypt, roundup_plaintext
* Canonicalize module_defaults actions and action_groups pre-fork and cache them on the play
* Call get_action_args_with_defaults with the resolved FQCN plugin and don't pass the redirect list
* Add validation for action_group metadata and a toggle to disable the warnings
* Handle groups recursively referring to each other
* Remove special-casing for non-fqcn actions in module_defaults groups
* Error for actions and groups in module_defaults that can't be resolved
* Error for fully templated module_defaults
* Add integration tests for action_groups
* Changelog
Since the task and connection both have the same 'retries' keyword, the task default
would override the connection value.
Do not pass 'retries' from the task to the connection options.
* Set ssh_connection retries default value back to 0
It was 0 before the move to config and was changed to 3 by accident.
* rebased with upstream
* removed extra usetty as it wasnt needed, style changes, added var option setable by inventory for pkcs11
* update pkcs11_provider version_added
* Update lib/ansible/plugins/connection/ssh.py
Co-authored-by: Jordan Borean <jborean93@gmail.com>
* Update lib/ansible/plugins/connection/ssh.py
Correct logic for a password being required for pkcs11_provider
Co-authored-by: Jordan Borean <jborean93@gmail.com>
* style nit fixes for checking pkcs11_provider is set
* fixed duplication when using password_prompt with pkcs11_provider
* added changelog fragment
* added changelog fragment
Co-authored-by: David Whiteside <david.whiteside@nrel.gov>
Co-authored-by: Matt Davis <nitzmahone@users.noreply.github.com>
Co-authored-by: Jordan Borean <jborean93@gmail.com>
* Fix module-specific defaults in the gather_facts, package, and service action plugins.
* Handle ansible.legacy actions better in get_action_args_with_defaults
* Add tests for each action plugin
* Changelog
Fixes#72918
* pause - ensure control characters are always set appropriately
On some systems, curses.tigetstr() returns None, which does not work as a control character.
* Add unit tests
* Sort imports
* Skip on older Python
This is an action plugin and only runs on the controller, so no need to test of Python 2. Making
the import hackery work on Python 2 would required some more work which I am not sure is
worth it since we are moving away from Python 2 support on the controller.
* Make the tests work on Python 2 and 3
* Fix BaseFileCacheModule#keys to respect prefix
Change:
- Previously BaseFileCacheModule#keys would return keys with the cache
prefix. These keys are impossible to retrieve from the cache without
removing the prefix or using the cache without a prefix.
Now it removes the prefix from the key and only returns keys that
share the same prefix as the cache.
Test Plan:
- New unit tests
* Add explicit BaseFileCacheModule#keys test
Test that files that do not match the cache prefix are ignored.
Test that the prefix is removed from the cache key.
* dont rely on vars, task already gives us info
* ensure we always display delegation in host label
* also added parens with ansible_host to show target host vs resolved host
* delegating to self is not delegating
* delegated vars restoration for backwards compat
* tests need mock task with delegate_to
Change:
- Newer Solaris drops setfacl. Add a fallback for its chmod ACL syntax.
Test Plan:
- New units
Tickets:
- Fixes#74282
Signed-off-by: Rick Elrod <rick@elrod.me>
Change:
- Regression introduced in #70785
- When macOS chmod ACL syntax is used, Solaris-derived chmods return
with a status of 5. This is also used for our sshpass handling,
because sshpass will return 5 on auth failure. This means on Solaris,
we incorrectly assume auth failure when we reach this branch of logic
and try to run chmod with macOS syntax.
- We now wrap this specific use of chmod in an exception handler that
looks for AnsibleAuthenticationFailure and skips over it. This adds
another authentication attempt (something we normally avoid to prevent
account lockout), but seems better than the regression of not allowing
other fallbacks to be used.
- Without this patch, if setfacl fails on Solaris (and sshpass is used),
we do not try common_remote_group or world-readable tmpdir fallbacks.
Test Plan:
- New unit
Signed-off-by: Rick Elrod <rick@elrod.me>
This simplifies rendering the hostname (or hostname+delegated host) in
the default callback module, and reduces code duplication
I've chosen not move where in each handler the host label is rendered,
in case subsequent operations has side effects. However I'm happy to
change that if considered safe.
I've chosen not to change the formatting operator used (%), to avoid
changes in rendering that might result.
Signed-off-by: Alex Willmer <alex@moreati.org.uk>
* all lookups to support config system
- added get_options to get full dict with all opts
- fixed tests to match new error messages
- kept inline string k=v parsing methods for backwards compat
- placeholder depredation for inline string k=v parsing
- updated tests and examples to also show new way
- refactored and added comments to most custom k=v parsing
- added missing docs for template_vars to template
- normalized error messages and exception types
- fixed constants default
- better details value errors
Co-authored-by: Felix Fontein <felix@fontein.de>
Abhijeet Kasurde