* Make ansible_selinux facts a consistent type
Rather than returning a bool if the Python library is missing, return a dict with one key containing a message explaining there is no way to tell the status of SELinux on the system becasue the Python library is not present.
* Fix unit test
The /etc/os-release based distro detection doesn't
seem to work for Ubuntu 10.04 (no /etc/os-release?).
So it was testing the next case which was /etc/lsb-release to
see if it is 'Mandriva'. Since the check for existence of
(/etc/lsb-release, Mandrive) was the first non-empty dist
file match, 'ansible_distribution' was being set to 'Mandriva'
expecting to be corrected by the data from the dist file content.
But since the dist file parsing for Mandriva didn't match for
Ubuntu 10.04 /etc/lsb-release _and_ there is no Debian specific
lsb-release check, 'ansible_distribution' stayed at 'Mandriva'
and the dist file checking loop keeps going and eventually off
the end of the list before finding a better match.
Adding a debian/ubuntu specific check for /etc/lsb-release after
the debian os-release sets the info correctly and stops further
checking of dist files.
Fixes#30693
* Added support to retrieving LIG resources in HPE OneView
* Fixing copyright header according to review
* Swapping out config for full credentials in parameter for documentation
* Added support to retrieving Enclosures in HPE OneView
- Added unit tests
* Updated version_added to 2.5
* Changing return type of enclosure_script to string
* Fixing copyright header according to review
* Replaced config for credentials in parameters for documentation
* Fix fact failures cause by ordering of collectors
Some fact collectors need info collected by other facts.
(for ex, service_mgr needs to know 'ansible_system').
This info is passed to the Collector.collect method via
the 'collected_facts' info.
But, the order the fact collectors were running in is
not a set order, so collectors like service_mgr could
run before the PlatformFactCollect ('ansible_system', etc),
so the 'ansible_system' fact would not exist yet.
Depending on the collector and the deps, this can result
in incorrect behavior and wrong or missing facts.
To make the ordering of the collectors more consistent
and predictable, the code that builds that list is now
driven by the order of collectors in default_collectors.py,
and the rest of the code tries to preserve it.
* Flip the loops when building collector names
iterate over the ordered default_collectors list
selecting them for the final list in order instead
of driving it from the unordered collector_names set.
This lets the list returned by select_collector_classes
to stay in the same order as default_collectors.collectors
For collectors that have implicit deps on other fact collectors,
the default collectors can be ordered to include those early.
* default_collectors.py now uses a handful of sub lists of
collectors that can be ordered in default_collectors.collectors.
fixes#30753fixes#30623
* Use vault_id when encrypted via vault-edit
On the encryption stage of
'ansible-vault edit --vault-id=someid@passfile somefile',
the vault id was not being passed to encrypt() so the files were
always saved with the default vault id in the 1.1 version format.
When trying to edit that file a second time, also with a --vault-id,
the file would be decrypted with the secret associated with the
provided vault-id, but since the encrypted file had no vault id
in the envelope there would be no match for 'default' secrets.
(Only the --vault-id was included in the potential matches, so
the vault id actually used to decrypt was not).
If that list was empty, there would be an IndexError when trying
to encrypted the changed file. This would result in the displayed
error:
ERROR! Unexpected Exception, this is probably a bug: list index out of range
Fix is two parts:
1) use the vault id when encrypting from edit
2) when matching the secret to use for encrypting after edit,
include the vault id that was used for decryption and not just
the vault id (or lack of vault id) from the envelope.
add unit tests for #30575 and intg tests for 'ansible-vault edit'
Fixes#30575
* Fix 'distribution' fact for ArchLinux
Allow empty wasn't breaking out of the process_dist_files
loop, so a empty /etc/arch-release would continue searching
and eventually try /etc/os-release. The os-release parsing
works, but the distro name there is 'Arch Linux' which does
not match the 2.3 behavior of 'Archlinux'
Add a OS_RELEASE_ALIAS map for the cases where we need to get
the distro name from os-release but use an alias.
We can't include 'Archlinux' in SEARCH_STRING because a name match on its keys
but without a match on the content causes a fallback to using the first
whitespace seperated item from the file content as the name.
For os-release, that is in form 'NAME=Arch Linux'
With os-release returning the right name, this also supports the
case where there is no /etc/arch-release, but there is a /etc/os-release
Fixes#30600
* pep8 and comment cleanup
* Fix pkg_mgr fact on OpenBSD
Add a OpenBSDPkgMgrFactCollector that hardcodes pkg_mgr
to 'openbsd_pkg'. The ansible collector will choose the
OpenBSD collector if the system is OpenBSD and the 'Generic'
one otherwise.
This removes PkgMgrFactCollectors depenency on the
'system' fact being in collected_facts, which also
avoids ordering issues (if the pkg mgr fact is collected
before the system fact...)
Fixes#30623
* Fix nxos provider transport warning issue
* Add default value of transport arg in provider spec
* Remove default value if transport arg in top level spec
This ensure deprecation warning is seen only in case transport
is given as a top level arg in task
* Refactor nxos modules to reference transport value from provider
spec
* Fix unit test
* Remove transport arg assignment in nxos action plugin
* As assigning transport value is handled in provider spec
top level task arg assignment is no longer required
* Add Routing Engine Facts
- Map routing engine output information to routing_engines facts dict.
- Add fact 'has_2RE', which is a quick way to determine how many REs
the chassis has.
* Fix a typo
* Fix more typos
* Add slot number to routing_engine dict
* Add facts about the installed chassis modules
* Fix typo
* Fixed another typo
* Fix Path
* Change path again.
* More Typos
* Add some deubgging
* Add additional information for hardware components.
- Return information about the Routing Engines.
- Return a fact to easily determine if the device
has two routing engines.
- Return information about the hardware modules.
* Addressed pep8 stardard failures.
* Add unit test fixtures.
* Rename fixture.
* Fix unit test failures.
- Rename the fixture file to what the unit test expects.
- Strip out junos namespace attributes.
Rename file to match what the unit test expects.
* Scrubbed the routing engine serial numbers.
* Add unit test facts for new tests.
- Add unit test for ansible_net_routing_engines fact
- Add unit test for ansible_net_modules fact
- Add unit test for ansible_net_has_2RE
* Fixed spacing.
* Don't ask for password confirm on 'ansible-vault edit'
This is to match the 2.3 behavior on:
ansible-vault edit encrypted_file.yml
Previously, the above command would consider that a 'new password'
scenario and prompt accordingly, ie:
$ ansible-vault edit encrypted_file.yml
New Password:
Confirm New Password:
The bug was cause by 'create_new_password' being used for
'edit' action. This also causes the previous implicit 'auto prompt'
to get triggered and prompt the user.
Fix is to make auto prompt explicit in the calling code to handle
the 'edit' case where we want to auto prompt but we do not want
to request a password confirm.
Fixes#30491
Unittests are sometimes run without network connectivity in build
systems. Make that work correctly by mocking out _get_url_data with the
expected return value.
* This commit includes a unit test to exercise the _is_role
function and make sure it doesn't break in any Python version.
* Import os.path and other minor fixups
* module should fail if eos_user is added without configured_password or nopassword or sshkey
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* fix eos_user unit test
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* fix eos_user integration test
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* Add FcoeNetworkFactsModule for retrieving HPE OneView FCoE Networks
- Allow querying for FCoE Network resources in HPE OneView
- Adds unit tests to new module
* Fix "required: no"
* Add NetworkSetFactsModule for retrieving HPE OneView Network Sets
- Allow querying for Network Set resources in HPE OneView
- Adds unit tests to new module
- Updates oneview_module_loader copyright header to short GPL3 version
* Adding possibility to pass in credentials as parameters
* Removed required false and changed format of filter_by_name declaration
* Updated examples in docs to reflect new way to pass in credentials
- All examples of the oneview_network_set_facts updated to use
credential parameters
- All required=False from oneview base module removed
- Shared docs updated to bring attention to API version being used
* Add the ability to modify shard count to kinesis_stream module
* Fixed an issue in kinesis_stream where update() reports not changed when it is changed
* Remove unreachable message and make the try and catch block shorter
* Tidy mount module for testing
Fix spelling mistakes in comments. I *think* the example for omitting parents
root has the wrong parent ID.
Make mountinfo file a parameter for testing.
* Don't strip leading slash from mounts
The current code does not follow the example, it produces src=tmp/aaa instead
of src=/tmp/aaa. This causes problems with bind mounts under /rootfs.
* Use dictionary to store mounts by ID
Instead of looping over each one to check if the ID matches. This does not
preserve the order of the output on < Python3.6, but that is not necessary.
* Make linux_mounts a dict
Always accessed by 'dst', so avoid looping by just making it a key.
* Add test case for get_linux_mounts
* make groups magic var dependant on inventory
it was overtly restricted by 'host'
minor fixes to test_var_manager.py, need to test other values also
* pepe hates extra blank line
- Fixes to lambda
- reformatting + tests for lambda_facts
- lambda module integration test
- switch lambda and lambda_facts to AnsibleAwsModule
- Get the account ID from STS, GetUser, and finally error message
Michael Vermaes