* * `reconcile_candidate()`
* old code searched the ip route configs for a given prefix+nexthop and then tried to remove the route based on prefix+nexthop only; this would fail when a static route was configured with `track` values.
* new code still looks for prefix+nexthop but uses the route config it finds on the device to remove it; e.g.
* search for: `ip route 192.168.20.64/24 192.0.2.3`
* find: `ip route 192.168.20.64/24 192.0.2.3 track 1 10`
* remove: `no ip route 192.168.20.64/24 192.0.2.3 track 1 10`
* logic cleanups:
* old code did a `show run` for every prefix. This can be a lot of data when there are large configs.
* new code uses filters to only return the static route configs.
* The filters now allow a common code path so no need for default vs vrf code paths
* `sanity` test: 100% Pass rate on N9K,N7K,N6K,N3K
- Bugfix Pull Request
`nxos_static_route`
* filter() does not return a list with python3
`filter()` was breaking pytest when it ran with python3, since it returns
an iterable instead of a list with python3.
Found that I didn't really need `filter()` anyway so just removed it
* restore var names /w/want/
The unstable alias wasn't intended for slow but otherwise stable
tests. However, the alternatives are to either dedicate an entire
test group to this one test or mark it unsupported.
Marking it unstable at least permits the test to run when changes
are made to the integration test or the module itself, which is
better than not running the tests at all.
* [WIP] Additional DevTest Lab modules
* updates
* try global schedule again
* dtl schedule
* try full dtl schedule test
* fixing schedule
* fixed problem
* another fix
* fixed test
* different time format
* fixed absent state
* test policy idempotence
* more updates
* updated devtestlabpolicy
* fixed syntax
* updated dtl policy test
* updated image id
* fixed test
* fixed bug
* fixed bugs and docs
* fixed bug
* + small cleanup
* reenabled tests but disabled leaking tests
* disabled test
* Adding cnos_system module to Ansible.
* Adding UT, Functional test required for cnos_system. Bugs came up are fixed
* Adding more files to the cnos_system suit.
* Fixed another problem where `group-timeout` was processed before `ip igmp snooping` was enabled
* `sanity` playbook:
* N6K: `show ip igmp snooping | json` succeeds on the device but doesn't return any data in body; added a skip to the sanity playbook to keep it out of CI
* Added a setup task to do initial cleanup on the device
* initial commit
* fix execute and \r\n
* \r attempt 2
* updated with integration tests and using new csharp import
* Apply suggestions from code review
Co-Authored-By: rcanderson23 <rcanderson23@gmail.com>
* fixed small docuement inaccuracies wrt returns
* removal of state in feature result
* removal of rc
* small fixes suggested in code review
* fixed variable assigning to result
* addition of comments on conditionals for clarity on matching
* swap logic of check_mode
* set $reboot_required so it is always returned
* removal of extraneous return information
* addition of integration tests
* set installation of parent features to true
* remove 2008 from tests
* changed test for TelnetClient from NetFx3
* change of tabs to spaces
* Add test check for OS version
* Use local dummy repo for flatpak_remote integration tests
* Excludes versions of Ubuntu older than 16.04 from tests
Since there are no flatpak packages available for these Ubuntu versions
* Adds handler that removes temporary symlink
* win_dns: Initial work
* win_dns: initial commit
* Renaming win_dns -> win_dns_record
* win_dns_record: Fix record leakage in output
* win_dns_record: Fix erroneous minimums enforcement
It is apparently completely legitimate to specify a TTL that is below
minimum; it will just get ignored in favor of the server's minimum.
* win_dns_record: Fix new-host changes reported incorrectly
* win_dns_record: Fix TTL changes reported incorrectly
* win_dns_record: Fix existing records not recognized
* win_dns_record: Remove obsolete object
* Refactorize check mode
* Add computer_name parameter
* Refactorize diff and changed to read DNS end state
* Fix pslint tests PSUseDeclaredVarsMoreThanAssignments and PSAvoidUsingCmdletAliases
* Minor fix, misnamed variable.
* win_dns_record: Fix "changed" state in check mode
* win_dns_record: cleanups
* win_dns_record: fix TTL update not changed regression
* Add initial integration tests
* win_dns_record: integration tests
* win_dns_record: Reverted 9cf5f2d8e6
The approach from that commit breaks check mode.
* win_dns_record: de-scope some records
These are either esoteric (meaning limited realworld testing)
or require additional thought to do properly (eg MX, which
has its "priority" level).
* win_dns_records tests: Ensure DNS services are installed
* Update lib/ansible/modules/windows/win_dns_record.py
Co-Authored-By: johnboy2
* Update lib/ansible/modules/windows/win_dns_record.py
Co-Authored-By: johnboy2
* Aggregated suggestions from dagwieers
* Fix bad powershell test argument
* win_dns_record partially converted to new Powershell module interface
win_dns_record converted to new Powershell module interface, except diff
and required_if
* win_dns_record: convert diff support
* win_dns_record: convert diff support to after-before style
* Don't test for Add-WindowsFeature
* win_dns_record: Fix diff
When check mode is used diff changes must be simulated.
* Style consistency/clean-ups
* Fix integration test typos
* Improve readability of diff output
The original intention of the diff output was to resemble zone file records
(except that the zone-name is added onto each record). In that light, the
missing *record class* information (always "IN" in our case) was an oversight.
This just makes the diff output more "instantly readable" for DNS gurus.
* win_dns_record: Add diff tests
* Fix ansible-test sanity check fails
* Apply suggestions from code review
Added suggestions from dagwieers
Co-Authored-By: johnboy2 <john@jnelson.ca>
* win_dns_record: Skip 2008 and friends
* Reword error messages so they start capitalized.
* Fix sanity error
* win_dns_record: Document ttl range
* win_dns_record: Additional supportability barriers in tests
* win_dns_record: Typo
* win_dns_record: Sanity fix
* win_dns_record: Use OS-test only for compat checking
* Add an option to parse botocore.endpoint logs for the AWS actions performed during a task
Add a callback to consolidate all AWS actions used by modules
Added some documentation to the AWS guidelines
* Enable aws_resource_actions callback only for AWS tests
* Add script to help generate policies
* Set debug_botocore_endpoint_logs via environment variable for all AWS integration tests
Ensure AWS tests inherit environment
(also remove AWS CLI in aws_rds inventory tests and use the module)
* New module postgresql_facts: Gathers facts about remote PostgreSQL instances
* New module postgresql_facts: fix default values of function
* New module postgresql_facts: add extension support
* New module postgresql_facts: fixed typo
* New module postgresql_facts: added integration test
* New module postgresql_facts: fix test error
* New module postgresql_facts: add info about min server version
* New module postgresql_facts: fix
* New module postgresql_facts: fix
* New module postgresql_facts: added repl stat tables checks
* New module postgresql_facts: fix
* New module postgresql_facts: fix
* New module postgresql_facts: fix
* New module postgresql_facts: fix
* New module postgresql_facts: fix
* New module postgresql_facts: fix
* New module postgresql_facts: fix
* New module postgresql_facts: ansible_facts -> postgresql_facts
* New module postgresql_facts: fix ci
New module postgresql_facts: revision for review
New module postgresql_facts: revision for review, fix
* fix doc
* New module postgresql_facts: add data types to param dict
* New module postgresql_facts: code refactoring
* # This is a combination of 3 commits.
# The first commit's message is:
New module postgresql_facts: incl_subset => filter
# This is the 2nd commit message:
New module postgresql_facts: fix a typo
# This is the 3rd commit message:
New module postgresql_facts: fixes
* New module postgresql_facts: incl_subset => filter
New module postgresql_facts: fix a typo
New module postgresql_facts: fixes
Various cosmetic and doc changes
* New module postgresql_facts: fix filter type
* New module postgresql_facts: fix sanity
* New module postgresql_facts: change ansible_facts to postgresql_facts
* New module postgresql_facts: fix tests
* New module postgresql_facts: fixes
* New module postgresql_facts: fixes
* New module postgresql_facts: fixes
* New module postgresql_facts: doc fixes
* New module postgresql_facts: added pretty_val
* New module postgresql_facts: added pending restart
* New module postgresql_facts: fix documentation
* New module postgresql_facts: fix documentation
* New module postgresql_facts: fixes by KN
* New module postgresql_facts: fixed sanity
* New module postgresql_facts: fixed tests
Include path in role with directory which has 'tasks' as end.
For example, roles/sometasks/templates is now considered while searching path.
Fixes: #42585
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
The cloudscale_floating_ip module failed if no server was assigned to
the floating IP. This also adds a test to avoid a regression.
The only way to have a floating IP without a server assigned is to
delete the server where the floating IP is currently assigned. Under
normal circumstances it's not possible to have an unassigned floating
IP.
The output of pw.getpwnam() does not distinbuish between local and remote accounts. It will return a result if an account exists locally or in the directory. When local is set to True in the task parameters, look through the local password database explicitly.
* Ensure luseradd is present for tests
* Add docs and warnings about local mode
* avoid using Postgres formatting function
* add tests for ALL FUNCTIONS IN SCHEMA
* documentation and changelog
* requested changes in tests
* fixed changelog
* Add source option.
* Split force parameter into force_source, force_absent and force_tag.
* Move all build-related options into a suboption called build.
* Add changelog.
* AWS: new module ec2_transit_gateway fixes#49376
* Add permissions neeeded for integration tests
* uncomment nolog on creds
* add unsupported to integration test aliases
* remove the shippable/aws/group alias so doesn't conflict with unsupported
function changed to do in place replacement, should be less expensive even with copy as it avoids 'sub copies', can compose with module_args_copy to create replacement for old behavior
attempt to fix#52910
* handle lists and subdicts correctly
* added missing exception case, which was not noticed since 'cleaning' was not working
* added comments to clarify exceptions
* cloudscale_server: remove required parameter check
The valid parameter combinations are already checked by the API. There
is no need to check a subset of this in the Ansible module as well. This
makes it more likely that future changes in the API won't require
changes in the Ansible module.
* cloudscale_server: add password parameter
Recent revisions of the cloudscale.ch API allow setting a password for a
server. Add this option to the cloudscale_server module.
* Integration test cleanup for cloudscale modules
This refactors the cleanup procedure for the integration tests of the
cloudscale_server and cloudscale_volume modules to use an "always"
section for cleanup. The cleanup code also deletes all resources which
contain the test run prefix. This ensures that all resources are cleaned
up regardless of the actual test result which is a prerequisite for
running these tests in CI.
* Move cloudscale_floating_ip tests from legacy to integration
This also adds code to make sure that floating IPs are deleted even if a
test run fails. This is unfortunately not possible for floatint IPv6
networks.
All inventory hosts to which a connection is actually established
should declare ansible_python_interpreter to avoid interpreter
auto-discovery, as that may select the wrong interpreter.
Basic passwords are rejected by the nxos device unless `no password strength-check`
is configured. This change just makes the password meet the minimum strength checks.
* The test was setting `lsa max` value to 2222 but the default `lsa hold` value is 5000.
* `hold` must be less than `max` or else the device raises a clierror, so I just added a lower non-default `hold` value to satisfy the cli.
* Output warnings from docker daemon on container create and update.
* Accept warning for blkio_weight instead of idempotency.
* Value quoting.
* Avoid loop variable conflict.
* Add changelog.
* Make one test case faster.
* Add 'Docker warning: ' prefix.
* Add a generalized warning reporting function.
* Add rollback_config
* Add change log fragment
* Fix broken test
* Actually fix broken tests
* Add rollback_config example
* Default rollback_config as None
* Abort early if rollback_config does not exist
* Add mount options
* Remove mount readonly default
* Fix driver_config test
* Add documentation
* Add changelog fragment
* Properly indent tmpfs_ options
* Use correct service suffix for mount tests
* Check for None value on tmpfs usage check
* Document change of mounts.readonly return key
* Use correct change log type
* Really use correct change log type
* Revert changing mount.readonly to read_only
* Configurable list of facts modules (#31783)
- allow for args dict for specific modules
- add way to pass parameters
- avoid facts poluting test
- move to 'facts gathered' flag
- add 'gathering' setting tests
- allow parallel option in case serialization is too slow
- added support to automatically map network facts
uses "smart" connection mapping
* Raise OpenSSLBadPassphraseError if passphrase is wrong.
* Improve handling of passphrase errors.
Current behavior for modules is: if passphrase is wrong (or wrongly specified), fail.
Current behavior for openssl_privatekey is: if passphrase is worng (or wrongly specified), regenerate.
* Add changelog.
* Add tests.
* Adjustments for some versions of PyOpenSSL.
* Update lib/ansible/modules/crypto/openssl_certificate.py
Improve text.
Co-Authored-By: felixfontein <felix@fontein.de>
* nxos_igmp_snooping: group-timeout fails when igmp snooping disabled
group-timeout config will be rejected by the device if `ip igmp snooping` is disabled.
* raise a failure for this condition
* reorder the command list so that group-timeout is always last
* SA fixes
* SA fixes
* only call gt_dependency if gt
Test yaml fixes for n3048:
* 3048 does not support bidir option
* 3048 cannot remove rp-address if prefix-list/route-map is present
* yes: no ip pim rp-address x.x.x.x
* no: no ip pim rp-address x.x.x.x prefix-list foo
* no: no ip pim rp-address x.x.x.x route-map bar
This test now passes on N9k/N7k/N6k/N3k.
* Support FOREIGN DATA WRAPPER and FOREIGN SERVER in postgresql_privs module
* Added available from note to fdw and fs object types
* Integration tests, examples in documentation
* Complete integration tests
* [docker_image] fix the changed state for tagging and pushing
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* [docker_image] add tests for (force) tagging and force pushing
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* [docker_image] add a news fragment for the fixed force tag/push behavior
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* Fixed crash with hidden files
added "-force" parameter on "Get-Item" cmdlet. this is needed to get file info if the file is "hidden"
without this option modules like win_file, win_template, win_copy crashes on hidden files. this is because with "test-path" it sees that the file exists, but "get-item" can't get the file info.
for more information on "-force option": https://docs.microsoft.com/en-us/powershell/module/microsoft.powershell.management/get-item
* Add changelog and integration tests
* fix tests for older Windows versions
* nxos_vxlan_vtep: Add dependency checks
Some of the N9k-specific attrs are failing due to hardware/feature/resources.
* `global_suppress_arp`
- dependency on TCAM resources
* `global_mcast_group_L3`
- hardware dependency on specific chassis/linecards
- feature dependency on `ngmvpn`
* `global_ingress_replication_bgp`
- hardware dependency on specific chassis/linecards
Tested on N9k with/without TCAM resources, various N9k chassis, N7k, N6k. All 100% Pass.
* pylint
* Add support for Windows hosts in the SSH connection plugin
* fix Python 2.6 unit test and sanity issues
* fix up connection tests in CI, disable SCP for now
* ensure we don't pollute the existing environment during the test
* Add connection_windows_ssh to classifier
* use test dir for inventory file
* Required powershell as default shell and fix tests
* Remove exlicit become_methods on connection
* clarify console encoding comment
* ignore recent SCP errors in integration tests
* Add cmd shell type and added more tests
* Fix some doc issues
* revises windows faq
* add anchors for windows links
* revises windows setup page
* Update changelogs/fragments/windows-ssh.yaml
Co-Authored-By: jborean93 <jborean93@gmail.com>
* Document and validate mode choices
* Update examples
* Test cpu float values
* Test correct option
* Fix module return sample
* Add secrets and user to module return value
* Order options alphabetically
* Add changelog
* yaml indentation
* Revert "Order options alphabetically"
This reverts commit 51dabccda7.
* Be consistent with choices type
* docker_swarm_service tests: use 'resolve_image: no' to avoid registry lookup if image is up-to-date.
* Improve docker_node performance: don't sleep after last try.
* Fix version checks in tests
* Set minimum version to 2.0.2
* Networks can only be updated >= docker-py 2.7
* Constraints require docker-py 2.4.0
* Healthchecks require docker-py 2.6.0
* Properly run tests different docker_py_versions
* Add changelog fragment
* Specify lowest version on placement.constraints
* Fix running new tests on older docker-py
* Handle different hosts formats returned by docker
* FIx test naming
* Quote str options
* secrets options require docker-py 2.4.0
* Replace InventoryFileCacheModule with a better developer-interface
Use new interface for inventory plugins with backwards compatibility
Auto-update the backing cache-plugin if the cache has changed after parsing the inventory plugin
* Update CacheModules to use the config system and add a deprecation warning if they are being imported directly rather than using cache_loader
* Fix foreman inventory caching
* Add tests
* Add integration test to check that fact caching works normally with cache plugins using ansible.constants and inventory caching provides a helpful error for non-compatible cache plugins
* Add some developer documentation for inventory and cache plugins
* Add user documentation for inventory caching
* Add deprecation docs
* Apply suggestions from docs review
* Add changelog
* Do not return 'instances' when wait is false
* Added integration tests for wait: false
* Added changelog fragment
* Fix test suite to work with ec2_instance
* Additional permissions
* Enforce boto3 version
* Fix broken tests
* Improve error messages
* fix linter issues
* adds fargate launch_type to ecs_task module
* White space changes
* fix documentation for running ecs task on fargate
* remove extraneous example from ecs_task
* White space changes
* Adds changelog fragment
* Pluralize minor_changes in changelog fragment
* Add Stop and Start task permissions
* New module postgresql_ping: simple module to check remote PostgreSQL server availability.
* New module postgresql_ping: simple module to check remote PostgreSQL server availability, doc fixes
* postgresql_ping: added integration tests
* New module postgresql_ping: misc changes
* New module postgresql_ping: change return suit
* New module postgresql_ping: tests reformatting, return value
* Various cosmetic/documentation fixes
* A few more fixes
* And even more cleanups
* Fix PEP8 issue
* Extend win_psmodule - rebased at 2019-01-07
* Change a way how defined parameters are added to the list
* Correct registering a repository
* Change way how tests for the check_mode: true are run
* Post-review updates
* Post-review updates -2
* Post-review updates -3
* Switch to PowerShell loop
* Minor updates
* Remove variants of an exception handling
* Change error handling
- The openssh_keypair module will return a public key output on the
private key creation.
- Add integration test in order to verify the public key output.
* set valid_until equal to current time + spot_wait_timeout
* Add checksum check for downloaded file.
* refactoring
* fix typo
* add fixes
* mart try,catch handling
* revert lib/ansible/modules/cloud/amazon/ec2.py from upstream
* refactoring
* remove empty lines
* add checksum verification for existing file
* fix current file check
* refactoring destination file check
* add handling exceptions
* refactoring
* Added download file hash data from url
* fix string aligning
* fix bug with uri
* Added get hash from multy-string file
* Added URI support for checksum file location
* refactoing
* Remove any non-alphanumeric characters for hash from url
* fix discussions; add support for PS3
* refactoring
* add size return value
* checkout from upstream for lib/ansible/modules/cloud/amazon/ec2.py
* add Ansible.ModuleUtils.Legacy support; refactoring
* Copyright added
* Checking files size before and after downloading added.
* remove unused code
* Corrected regexp for dotted slashed file name prefix in hash-file
* hotfix typo error; add int tests
* remove legacy module support; split checksum to checksum, checksum_algorithm, checksum_url
* changed default hash algorithm
* Fixed case for ContentLength = -1
* Old comment removed
* fix typo
* Remove file size check before downloading
* add alias to ; fix tests
* adjust tests; fix lint warnings from PSScritpAnalyzer
* workaround for bug in win_chocolatey module on win2008
* remove win_get_url.ps1 from /test/sanity/pslint/ignore.txt
* add checksum_algorithm as retuen value
* first normalise before return Result
* resolve discussions
Signed-off-by: Viktor Utkin <viktor.utkin7@yandex.ru>
* fix discussions
fix http tests as discussed
* fix last discussions
* Reduce code duplication and add idempotency check
* fix sanity issue and remove testing code
* move back to using tmp file for checksum comparison
Chris Van Heuveln