990 Commits (5a278a8ecd3e62b7805902d084efab58abc33593)

Author	SHA1	Message	Date
Elena Washington	3ca06bf1c8	iptables: option to configure Source NAT (#2292) ... * Clean up trailing whitespace * Add `--to-source` option to allow Source NAT (fix for #2291)	8 years ago
Brian Coca	ecee427cbc	added note about behaviour change in 2.2	8 years ago
Leo Antunes	d54905ecee	Allow multiple keys per host + minor improvements (#716) ... * known_hosts: clarify key format in documentation Add a small clarification to the documentation about the format of the "key" parameter. Should make #664 less of a issue for newcomers. * known_hosts: normalize key entry to simplify input Keys are normalized before comparing input with present keys. This should make it easier to deal with some corner cases, such as having a hashed entry for some host and trying to add it as non-hashed. * known_hosts: allow multiple entries per host In order to support multiple key types and allow the installed ssh version to decide which is more secure, the module now only overwrites an existing entry in known_hosts if the provided key is of the same type. Old keys of different types must be explicitly removed. Setting state to "absent" and providing no key will remove all entries for the host.	8 years ago
Brian Coca	29be1310e1	add missing author info	8 years ago
Michael Scherer	c8864c3220	Use a python3 compatible notation for octal (#2238)	8 years ago
Daniel Vigueras	735c1b6219	Add insert support to iptables. (#1180) ... Add insert support to iptables.	8 years ago
Adrian Likins	240afc0344	Merge pull request #2146 from ke3vin/interfacezone ... Fix the interface handling code to allow immediate changes. Also fixes switching an interface between zones.	8 years ago
Adrian Likins	ae6b3ac71d	Merge pull request #2225 from rusaksoft/iptables-add-icmp-type ... Iptables add icmp type	8 years ago
Dag Wieers	7618fd8749	Fix check-mode incorrectly returning changed (#2220) ... The lvol module has a different logic in check-mode for knowing when a change is induced. And this logic is *only* based on a size check. However during a normal run, it is the lvreduce or lvextend tool that decides when a change is performed (or when the requested and existing sizes differ). So while in check-mode the module reports a change, in real run-mode it does not in fact changes anything an reports ok. One solution would be to implement the exact size-comparison logic that is implemented in lvextend and lvreduce, but we opted to use the `--test` option to each command to verify if a change is induced or not. In effect both check-mode and run-mode use the exact same logic and conclusion.	8 years ago
Pavel Samokha	a0566037b4	iptables module - icmp-type better doc style	8 years ago
Pavel Samokha	7092118119	fix icmp-type	8 years ago
Pavel Samokha	747f6f6736	iptables module - add icmp_type	8 years ago
Yannig	bbd53572af	New lvol option: shrink. (#2135) ... If shrink is set to false and size is lower than current lv size, dont try to shrink logical volume.	8 years ago
Michael Scherer	557d37d3f1	Use type='path' rather than str, so path is expanded correctly	8 years ago
Kevin Hildebrand	9f2bc2853d	Fix the interface handling code to allow permanent and non-permanent operations. ... Also avoid using add_interface because it breaks in cases where the interface is already bound to a different zone.	9 years ago
Brian Coca	fbd00675f0	updated version added for pvs	9 years ago
Matt Davis	238af47a9d	Merge pull request #2007 from p53/devel ... Added pvs parameter to lvol module	9 years ago
Toshio Kuratomi	71d83b77bc	Recategorize git_config and shift version to 2.1	9 years ago
Brian Coca	09a1015bd7	updated version added	9 years ago
Matthew	d91baee7c9	Add git_config module (#1945) ... * Add git_config module This module can be used for reading and writing git configuration at all three scopes (local, global and system). It supports --diff and --check out of the box. This module is based off of the following gist: https://gist.github.com/mgedmin/b38c74e2d25cb4f47908 I tidied it up and added support for the following: - Reading values on top of writing them - Reading and writing values at any scope The original author is credited in the documentation for the module. * Respond to review feedback - Improve documentation by adding choices for parameters, requirements for module, and add missing description for scope parameter. - Fail gracefully when git is not installed (followed example of puppet module). - Remove trailing whitespace. * Change repo parameter to type 'path' This ensures that all paths are automatically expanded appropriately. * Set locale to C before running commands to ensure consistent error messages This is important to ensure error message parsing occurs correctly. * Adjust comment	9 years ago
René Moser	344dff4350	docs: fix make docs (#2107)	9 years ago
Chris Lamb	8d7d070201	system/ufw.py: Add security warning re. removing ufw application prof… ... It's not particularly obvious that removing an application will remove it from ufw's own state, potentially leaving ports open on your box if you upload your configuration. Whilst this applies to a lot of things in Ansible, firewall rules might cross some sort of line that justifies such a warning in his instance. Signed-off-by: Chris Lamb <chris@chris-lamb.co.uk>	9 years ago
p53	706cbf69ca	Add pvs parameter to documentation ... Add pvs parameter to documentation	9 years ago
codehopper-uk	aa29a4fd9c	Basic ability to set masquerade options from ansible, according to current code design/layout (mostly) (#2017) ... * Support for masquerade settings Ability to enable and disable masquerade settings from ansible via: - firewalld: mapping=masquerade state=disabled permanent=true zone=dmz Placeholder added (mapping) to support masquerade and port_forward choices initially - port_forward not implemented yet. * Permanent and Immediate zone handling differentiated * Corrected naming abstraction for masquerading functionality Removed mapping tag with port_forward choices - not applicable! * Added version info for new masquerade option Pull Request #2017 failing due to missing version info	9 years ago
Pavol Ipoth	14057da87c	Removing, unwanted pull	9 years ago
Pavol Ipoth	e3ca2c7aeb	Adding new ansible module lvol_cache	9 years ago
Pavol Ipoth	2be58bf100	Merge branch 'devel' of https://github.com/ansible/ansible-modules-extras into devel	9 years ago
Michael Scherer	ff74fc0072	Remove the +x from crypttab and cronvar (#2039) ... While this change nothing, it is better to enforce consistency	9 years ago
Jasper Lievisse Adriaanse	2b8debbc2b	Sprinkle some LANG/LC_* where command output is parsed (#2019)	9 years ago
Michael Scherer	2dbfdaa88b	Remove dead code (#1303) ... The review on https://github.com/ansible/ansible-modules-extras/pull/1303 show the problem was already fixed, so we just need to remove the code.	9 years ago
Pavol Ipoth	7be55e188a	Fixes #2008 Lvol module is not indempodent for cache lv's	9 years ago
Pavol Ipoth	ac9a48ad1e	Added pvs parameter to lvol module	9 years ago
kubilus1	773d402eac	Unchecked index causes IndexError.	9 years ago
Monty Taylor	38c8fec277	Merge pull request #1149 from Jmainguy/puppet_stdout ... Enable stdout and stderr on sucessful runs, making show_diff useable	9 years ago
René Moser	fc79c8820e	Merge pull request #1971 from insom/devel ... Add `to_destination` parameter to iptables	9 years ago
Vlad Gusev	f1175693f6	system/puppet: add --tags parameter (#1916) ... * system/puppet: add --tags parameter --tags [1] is used to apply a part of the node’s catalog. In puppet: puppet agent --tags update,monitoring In ansible: puppet: tags=update,monitoring [1] https://docs.puppetlabs.com/puppet/latest/reference/lang_tags.html#restricting-catalog-runs * Add example of tag usage. * system/puppet: add list type for a tags dict.	9 years ago
Aaron Brady	e2138c7e14	Add `to_destination` parameter	9 years ago
Chulki Lee	f3c168594a	osx_defaults: fix datetime ... Fix #1742	9 years ago
René Moser	daddc7caf4	Merge pull request #1478 from m0/firewalld_interface ... Extends firewalld module with ability to add/remove interfaces to/from zones	9 years ago
David Hocky	031f98e86c	fix dscp marking documentation in iptables module	9 years ago
René Moser	241dba1ee7	Merge pull request #1555 from LuckyGeck/devel ... Added reject_with and uid_owner support to iptables module	9 years ago
Linus Unnebäck	7def4b01f5	make: move down ansible import	9 years ago
Linus Unnebäck	b328feccb1	make: add empty return docs	9 years ago
Linus Unnebäck	a0aef208b6	module: system/make	9 years ago
Pavel Sychev	eda178a988	Added version restriction for uid_owner and reject_with.	9 years ago
Pavel Sychev	c15dcf888b	Added docs for reject_with and uid_owner.	9 years ago
Pavel Sychev	12890b14b2	Added reject_with and uid_owner support.	9 years ago
René Moser	0a65ddb3b1	Merge pull request #1641 from EmilienM/puppet/execute ... system/puppet: allow to run puppet -e	9 years ago
Brian Coca	10e70b5f48	Merge pull request #1874 from mscherer/better_verif_alternatives ... Add proper type to path and link	9 years ago
Michael Scherer	8c53e654f7	Add proper type to path and link ... Since both of them are path, it should be checked using the proper type.	9 years ago