- Unit tests for `modules` and `module_utils` are now limited to importing only `ansible.module_utils` from the `ansible` module.
- Unit tests other than `modules` and `module_utils` are now run only on Python versions supported by the controller (Python 3.8+).
- Unit tests are now run in separate contexts (`controller`, `modules`, `module_utils`), each using separate invocations of `pytest`.
- Improve code reuse.
- Add missing type hints, fix existing ones and convert them to PEP 484 style.
- Add missing imports and clean up existing ones.
- Add missing docstrings and clean up existing ones.
The `a/` and `b/` prefixes can be disabled in the `git diff` output by setting
`diff.noprefix` to `true`. The output is still a valid diff, but `ansible-test` would
raise an exception since without the prefixes, it thought the diff line was invalid.
* Upgrade pylint and deps in ansible-test.
* Enable pylint on Python 3.9.
* Update pylint config.
* Add ignore for vendored six.
* Add ignores for support plugins.
* Fix issue reported by pylint.
* introduce self-signed.ansible.http.tests
* forwarding of port 444
* forward port 8444 to port 444 on http test container
* Fix port forwarding for Windows under docker
* add changelog fragment
Co-authored-by: Jordan Borean <jborean93@gmail.com>
This warning was intended to help improve test environment configuration.
However, it has ended up producing mostly non-actionable warning noise instead.
In most situations a missing pip or python should result in test failures.
Reporting a missing pip also implies that it should be used by tests, which is not the case.
Tests should be invoking pip as a python module with the appropriate python interpreter instead.
* Remove unused code in ansible-test.
* Remove obsolete endpoint logic from ansible-test.
* Remove obsolete region selection in ansible-test.
* Remove obsolete port logic in ansible-test.
* Clean up ansible-test remote providers.
Change:
- Initial set of changes for renaming to ansible-core
- Includes changelog fragment changes from base -> core
- Does NOT include docs changes
- Modifies detection stuff in setup.py to support ansible<2.9 and ansible-base
Test Plan:
- ci_complete
* Emit warning when running on the controller with a Python older than 3.8
* Add spaces
Co-authored-by: Matt Clay <matt@mystile.com>
* and more spaces
Co-authored-by: Matt Clay <matt@mystile.com>
* s/Py/Python/
Co-authored-by: Matt Clay <matt@mystile.com>
* Add note to Control node requirements about Py3.8 requirement
* Add collection_name to deprecated call
* more spaces
Co-authored-by: Sviatoslav Sydorenko <wk.cvs.github@sydorenko.org.ua>
* Clarify that we are only packaging for py3.8+
Co-authored-by: Matt Clay <matt@mystile.com>
Co-authored-by: Sviatoslav Sydorenko <wk.cvs.github@sydorenko.org.ua>
* Update galaxy server image used in CI
* Fix port and migration issue
* Add delete step, still need to deal with pagination
* Make cleanup more efficient
* Remove testing code
* Fix ansible-test docker container detection.
* Attach test containers to the correct network.
* Do not assume `localhost` for accesing Docker.
* Look for containers on current network.
* Always map /var/run/docker.sock into containers.
This fixes issues when using a remote Docker host.
* Support container IP lookup from networks list.
* Fix container network attachment.
* Remove redundant container detection messages.
* Limit DOCKER_HOST parsing to TCP.
* Restore docker socket existence check.
The check is skipped if the docker hostname is not localhost.
* Correct changelog entry.
* Add support for GSSAPI/Kerberos to urls.py
* Test out changes with the latest test container
* Get remote hosts working
* Fix up httptester_krb5_password reader
* Fix tests for opensuse and macOS
* Hopefully last lot of testing changes
* Dont do CBT on macOS
* Fixes from review
Change:
- podman > 2 && < 2.2 does not support "images --format {{json .}}"
- podman also now outputs images JSON differently than docker
- Work around both of the above.
Test Plan:
- Tested with podman 2.0.6 in Fedora 31.
Signed-off-by: Rick Elrod <rick@elrod.me>
Co-authored-by: Sviatoslav Sydorenko <wk.cvs.github@sydorenko.org.ua>
* DOCS: updates intersphinx references for docs links
* TESTS: Raise the number of bytes scanned to determine if a file is binary. The newest ansible-2.10.inv file has its first null byte at position 2261. 4096 is still a cheap chunksize to read so it still makes sense to raise this.
Co-authored-by: Alicia Cozine <acozine@users.noreply.github.com>
Co-authored-by: Toshio Kuratomi <a.badger@gmail.com>
Changes to sanity and unit tests now trigger the ansible-test self-test integration tests.
No changelog entry since this only affects tests for ansible itself and not collections.
There are links from the scenario guides to collections but collections
docs aren't built in testing or locally when we're on the devel branch.
Due to that we need to make sure those references resolve to the
production docsite. We can use intersphinx to make sure that happens.
* The test for binary files wasn't reading enough of the file.
Checking for null bytes in the first 1024 bytes failed to diagnose the
ansible_2_10.inv file as binary
* Test against galaxy_ng
* Switch container image
* Remove redundant |default
* Re-enable
* Update image
* Update wording
* Don't use pulp as the container name
* Test galaxy cli against pulp
* linting fix
* Renames and small fixes
* Better handling for resetting pulp
* Clean up some things, add a comment
* I can't spell
* Bump fallaxy, use alternate pulp image
* Only reset pulp when we're are executing against pulp
* Update for updated pulp container
* Update some comments with correct URLs and typos
* Linting fix
* Pin pulp-fedora31 to a digest
* Address review comments for documentation
* Add mccabe complexity testing
* Make mccabe complexity an optional error
* Add mccabe to new sanity pylint requirements
* Add a changelog fragment.
Co-authored-by: Matt Clay <matt@mystile.com>
* config: singular ANSIBLE_COLLECTIONS_PATH
Every other *_PATH setting in ansible is singular, and the traditional
$PATH variable is also singular despite containing a list of
directories. Let's be consistent both internally and with POSIX
tradition.
* update all ANSIBLE_COLLECTIONS_PATHS env references to be singular
* deprecate plural ANSIBLE_COLLECTIONS_PATHS setting
Replace the ansible-base changelog linting and generation tool with antsibull-changelog and make it available for linting collections. Previously changelog linting was limited to ansible-base.
Ensure the vcenter provider initialize the `module_defaults` of all
the vmware modules, not just `vmware_guest`.
The VMware CI relies on this for the authentication of the different
VMware modules.
The commit adjust `incidental_vmware_prepare_tests/tasks/init_vcsim.yml`.
The test-suite uses a copy of `vmware_guest` that is not in the
`group/vmware` group. As a result, we need to manually pass the
authentification parameter.
Some code-smell sanity tests for ansible-base use subprocess to invoke ansible commands.
Intercept these commands to make sure the correct script and python version are used.
* Move ansible-test completion code.
* Fix a few type hints.
* Change docker completion based on context.
Collections now use version 2.0 of the default-test-container.
This is an updated version of the earlier 1.x default-test-container with ansible-base and cloud specific requirements removed.
Testing of ansible-base now uses version 1.0 of a new ansible-base-test-container.
This container is similar to the earlier 1.x default-test-container, but with unnecessary duplication of requirements across Python versions removed.
Collections which have tests that depend on requirements no longer present in the default test container should specify them in their test requirements files:
* tests/integration/requirements.txt
* tests/unit/requirements.txt
* Bump test container versions
Co-authored-by: Jordan Borean <jborean93@gmail.com>
* Only allow groups which were hardcoded in module_defaults.yml
only load action groups from the collection if module_defaults contains a potential group for the action
* Fix tests using modules that override those whitelisted in lib/ansible/config/module_defaults.yml
Third party modules should not be using group/ - use the action name instead
* add externalized module_defaults tests
add the missing group and collections
ci_complete
Co-authored-by: Matt Davis <mrd@redhat.com>
* changelog
ci_complete
* Fix import in tests
ci_complete
* Update with requested changes
ci_complete
* don't traceback since we don't validate the contents of module_defaults
ci_complete
Co-authored-by: Matt Davis <mrd@redhat.com>
* Split out sanity test requirements.
* Run each --venv test separately.
This provides verification that the requirements for each test are properly specified.
* Use a separate requirements file per sanity test.
* Skip setuptools/cryptography setup for sanity.
* Eliminate pyyaml missing warning.
* Eliminate more pip noise.
* Fix conflicting generate_pip_install commands.
* Add changelog fragment.
* Track collection for version_added.
Validate *all* version numbers in validate-modules.
For tagged version numbers (i.e. version_added), consider source collection to chose validation.
* Make tagging/untagging functions more flexible.
* Tag all versions in doc fragments.
* Tag all deprecation versions issued by code.
* Make Display.deprecated() understand tagged versions.
* Extend validation to enforce tagged version numbers.
* Tag versions in tests.
* Lint and fix test.
* Mention collection name in collection loader's deprecation/removal messages.
* Fix error IDs.
* Handle tagged dates in Display.deprecated().
* Also require that removed_at_date and deprecated_aliases.date are tagged.
* Also automatically tag/untag removed_at_date; fix sanity module removal version check.
* Improve error message when invalid version number is used (like '2.14' in collections).
* Allow to deprecate options and aliases by date instead of only by version.
* Update display.deprecate().
* Adjust behavior to conform to tested behavior, extend tests, and improve C# style.
* Parse date and fail on invalid date.
This is mainly to make sure that people start using invalid dates, and we eventually have a mess to clean up.
* C# code: improve validation and update/extend tests.
* Make sure that deprecate() is not called with both date and version.
* Forgot to remove no longer necessary formatting.
* Adjust order of warnings in C# code.
* Adjust unrelated test.
* Fix grammar (and make that test pass).
* Don't parse date, and adjust message to be same as in #67684.
* Sanity tests: disable date in past test.
* Validate-modules: validate ISO 8601 date format.
* Validate-modules: switch schema declaration for deprecated_aliases to improve error messages for invalid dates.
* Use DateTime instead of string for date deprecation.
* Validate that date in deprecated_aliases is actually a DateTime.
* Fix tests.
* Fix rebasing error.
* Adjust error codes for pylint, and add removed_at_date and deprecated_aliases.date checks to validate-modules.
* Make deprecation date in the past error codes optional.
* Make sure not both version and date are specified for AnsibleModule.deprecate() calls.
* Stop using Python 3.7+ API.
* Make sure errors are actually reported. Re-add 'ansible-' prefix.
* Avoid crashing when 'name' isn't there.
* Linting.
* Update lib/ansible/module_utils/csharp/Ansible.Basic.cs
Co-authored-by: Jordan Borean <jborean93@gmail.com>
* Adjust test to latest change.
* Prefer date over version if both end up in Display.deprecated().
Co-authored-by: Jordan Borean <jborean93@gmail.com>
* `meta/` directory in collections
* runtime metadata for redirection/deprecation/removal of plugin loads
* a compatibility layer to keep existing content working on ansible-base + collections
* a Python import redirection layer to keep collections-hosted (and otherwise moved) content importable by things that don't know better
* supported Ansible version validation on collection loads
* Add multipart/form-data functionality
* Fix some linting issues
* Fix error message
* Allow filename to be provided with content
* Add integration test
* Update examples
* General improvements to multipart handling
* Use prepare_multipart for galaxy collection publish
* Properly account for py2 vs py3, ensuring no max header length
* Address test assumptions
* Add unit tests
* Add changelog
* Ensure to use CRLF instead of NL
* Ignore line-endings in fixture
* Consolidate code, add comment
* Bump fallaxy container version
* ci_complete
* Testing: Add CentOS Linux On Power platform
* Add arch designation to remotes.
This avoids overloading the provider with the arch.
Also add a changelog entry.
Co-authored-by: Matt Clay <matt@mystile.com>
* Don't trigger full CI run for changes to changelogs/ and docs/ in collections.
* Add changelog fragment.
* Update changelogs/fragments/68550-ansible-test-docs-changelogs.yml
Co-Authored-By: Matt Clay <matt@mystile.com>
Co-authored-by: Matt Clay <matt@mystile.com>
The last task in a play should now properly report code coverage.
This change should also eliminate empty coverage files, as well as incomplete coverage files resulting from early worker termination.
* Fix ansible-test coverage analysis option usage.
The `--input-dir` option for `coverage analyze targets generate` was being ignored.
No changelog entry since this feature has not yet been released.
* Move coverage config to fix type annotations.
Declaring the types before referencing them makes sure they're recognized by tools such as PyCharm.
Now empty `*.py` files are ignored during module_utils import analysis for change detection.
This eliminates "No imports found" warnings for files which should have no imports.
* ansible-galaxy - optimise some paths and use fake galaxy int tests
* Added init, built, and publish tests
* Test against both mocked Galaxy and AH server
* Finish off writing the install tests
* Fix up broken tests
* Rename test target and add migrated tests
* Use cloud provider for Galaxy implementation
* Added blank static config
* Use correct alias group
* Set release version and fix copy typo
* Remove reset step as it is no longer needed
* Use sane env var names for test container name
Make AWS test plugin to refer to the aws-permissions-for-integration-tests section of the AWS devel docs now that we have them, rather than suggesting to flag down specific users.
* Support private test plugins in ansible-test.
This feature is exclusively used for testing Ansible itself and is not available to collections.
Content in the newly supported directories will be added in follow-up PRs.
* Add new directory to path classification.
* Support new paths in shebang test.
* Add new directory to manifest.
* Add warning when running devel. Addresses #67362
* Add config entry to disable devel warning, so it doesn't impact CI
* Update warning about using devel
* Refactor coverage file enumeration.
* Relocate sanitize_filename function.
* Support sets when writing JSON files.
* Generalize setting of info_stderr mode.
* Split out coverage path checking.
* Split out collection regex logic.
* Improve sanitize_filename type hints and docs.
* Clean up coverage erase command.
* Fix docs and type hints for initialize_coverage.
* Update type hints on CoverageConfig.
* Split out logic for finding modules.
* Split out arc enumeration.
* Split out powershell coverage enumeration.
* Raise verbosity level of empty coverage warnings.
* Add code coverage target analysis to ansible-test.
This change moves all code for the `ansible-test coverage` command into the `coverage` directory.
Each subcommand is split into a separate file.
Only minor spelling changes were made aside from code relocation.
Bind the govcsim service on port 1443, this way we don't need root privilege
to start the container. This allow us to use ansible-test with podman
seamlessly.
The commit also avoid the mapping of port 80. We don't need it.
Matt Clay