* Add test for symbolic to octal when others is omitted
Add case when there should be no permissions for other.
And specific permissions for owner and group.
* Fix permissions test by explicitly setting no permissions for others
* Add additional cases where multiple permissions are specified
* Fix detection of available hashlib algorithms
Detection of hashlib algorithms now works on Python 3.x.
The new implementation works on Python 2.7 and later.
Test coverage is provided by both integration and unit tests.
* Add additional details about hashlib in docs
When looking up the `no_log` setting for a parameter that is an alias in
`AnsibleModule._log_invocation()`, the alias value will always be an
empty dictionary since `self.aliases` on the `AnsibleModule` instance is
never updated after initialization. Since the `no_log` setting is on the
canonical parameter not the alias, an incorrect warning is issued if the
parameter matches `PASSWORD_MATCH`.
This PR returns the aliases dictionary as an attribute of the
`ValidationResult` and updates the `aliases` attribute on the
`AnsibleModule` instance.
* user - Remove unused code.
* Replace deprecated abstractproperty decorator.
* Fix __all__ to be a tuple.
* Use a generator in subelements lookup.
* Use from import in basic.py
* Add changelog fragment.
* Fix selinux unit test.
Since moving to distro, it is possible to return this information for all platforms, not just Linux.
Also return version information for all platfrom not just Linux.
Update unit tests.
Remove some duplicate unit tests though I think there are more to remove.
* Fix docstring formatting
* Minor docstring changes
* Mock distro.id for Solaris service test
* Update comment
* Don't mutate os.environ in AnsibleModule.run_command, make a copy, and pass to Popen. Fixes#74783
* Simplify code a bit
* More simple
* Address some other potentially non threadsafe operations
* Add if around umask
* Address unit test assumptions
* Add clog frag
* yaml syntax issue
* Begin using ArgumentSpecValidator in AnsibleModule
* Add check parameters to ArgumentSpecValidator
Add additional parameters for specifying required and mutually exclusive parameters.
Add code to the .validate() method that runs these additional checks.
* Make errors related to unsupported parameters match existing behavior
Update the punctuation in the message slightly to make it more readable.
Add a property to ArgumentSpecValidator to hold valid parameter names.
* Set default values after performining checks
* FIx sanity test failure
* Use correct parameters when checking sub options
* Use a dict when iterating over check functions
Referencing by key names makes things a bit more readable IMO.
* Fix bug in comparison for sub options evaluation
* Add options_context to check functions
This allows the parent parameter to be added the the error message if a validation
error occurs in a sub option.
* Fix bug in apply_defaults behavior of sub spec validation
* Accept options_conext in get_unsupported_parameters()
If options_context is supplied, a tuple of parent key names of unsupported parameter will be
created. This allows the full "path" to the unsupported parameter to be reported.
* Build path to the unsupported parameter for error messages.
* Remove unused import
* Update recursive finder test
* Skip if running in check mode
This was done in the _check_arguments() method. That was moved to a function that has no
way of calling fail_json(), so it must be done outside of validation.
This is a silght change in behavior, but I believe the correct one.
Previously, only unsupported parameters would cause a failure. All other checks would not be executed
if the modlue did not support check mode. This would hide validation failures in check mode.
* The great purge
Remove all methods related to argument spec validation from AnsibleModule
* Keep _name and kind in the caller and out of the validator
This seems a bit awkward since this means the caller could end up with {name} and {kind} in
the error message if they don't run the messages through the .format() method
with name and kind parameters.
* Double moustaches work
I wasn't sure if they get stripped or not. Looks like they do. Neat trick.
* Add changelog
* Update unsupported parameter test
The error message changed to include name and kind.
* Remove unused import
* Add better documentation for ArgumentSpecValidator class
* Fix example
* Few more docs fixes
* Mark required and mutually exclusive attributes as private
* Mark validate functions as private
* Reorganize functions in validation.py
* Remove unused imports in basic.py related to argument spec validation
* Create errors is module_utils
We have errors in lib/ansible/errors/ but those cannot be used by modules.
* Update recursive finder test
* Move errors to file rather than __init__.py
* Change ArgumentSpecValidator.validate() interface
Raise AnsibleValidationErrorMultiple on validation error which contains all AnsibleValidationError
exceptions for validation failures.
Return the validated parameters if validation is successful rather than True/False.
Update docs and tests.
* Get attribute in loop so that the attribute name can also be used as a parameter
* Shorten line
* Update calling code in AnsibleModule for new validator interface
* Update calling code in validate_argument_spec based in new validation interface
* Base custom exception class off of Exception
* Call the __init__ method of the base Exception class to populate args
* Ensure no_log values are always updated
* Make custom exceptions more hierarchical
This redefines AnsibleError from lib/ansible/errors with a different signature since that cannot
be used by modules. This may be a bad idea. Maybe lib/ansible/errors should be moved to
module_utils, or AnsibleError defined in this commit should use the same signature as the original.
* Just go back to basing off Exception
* Return ValidationResult object on successful validation
Create a ValidationResult class.
Return a ValidationResult from ArgumentSpecValidator.validate() when validation is successful.
Update class and method docs.
Update unit tests based on interface change.
* Make it easier to get error objects from AnsibleValidationResultMultiple
This makes the interface cleaner when getting individual error objects contained in a single
AnsibleValidationResultMultiple instance.
* Define custom exception for each type of validation failure
These errors indicate where a validation error occured. Currently they are empty but could
contain specific data for each exception type in the future.
* Update tests based on (yet another) interface change
* Mark several more functions as private
These are all doing rather "internal" things. The ArgumentSpecValidator class is the preferred
public interface.
* Move warnings and deprecations to result object
Rather than calling deprecate() and warn() directly, store them on the result object so the
caller can decide what to do with them.
* Use subclass for module arg spec validation
The subclass uses global warning and deprecations feature
* Fix up docs
* Remove legal_inputs munging from _handle_aliases()
This is done in AnsibleModule by the _set_internal_properties() method. It only makes sense
to do that for an AnsibleModule instance (it should update the parameters before performing
validation) and shouldn't be done by the validator.
Create a private function just for getting legal inputs since that is done in a couple of places.
It may make sense store that on the ValidationResult object.
* Increase test coverage
* Remove unnecessary conditional
ci_complete
* Mark warnings and deprecations as private in the ValidationResult
They can be made public once we come up with a way to make them more generally useful,
probably by creating cusom objects to store the data in more structure way.
* Mark valid_parameter_names as private and populate it during initialization
* Use a global for storing the list of additonal checks to perform
This list is used by the main validate method as well as the sub spec validation.
* module compat for py3.8+ controller
* replaced internal usages of selinux bindings with internal ctypes binding (allows basic selinux operations from any Python interpreter), plus tests
* added new respawn_module API to allow modules to import Python packages that are only available under a well-known interpreter, plus tests
* added respawn logic to modules that need Python libs from a specific system interpreter (apt, apt_repository, dnf, yum)
minimize internal HAVE_SELINUX usage
spurious junk
pep8
* pylint fixes
* add RHEL8 Python 3.8 testing
* more pylint
* import sanity
* unit tests
* changelog update
* fix a bunch of stuff
* tweak changelog
* fix setup_rpm_repo on EL8
* misc sanity/test fixes
* misc feedback tweaks
* fix import fallback in test module
* fix selinux MU test
* fix dnf tests to avoid python-dependent test packages
* add trailing LFs to aliases
* fix yum tests to avoid test package with Python deps
* hack create_repo for EL6 to create noarch package
The `command` module does not return stdout & sterr when calling
a non existing executable or an unknown exception arises. This fix
lets the module return empty byte strings in those cases.
* file: add symlink is in a sticky directory tests
* file: handle symlink in a sticky directory
Co-Authored-By: Sviatoslav Sydorenko <wk.cvs.github@sydorenko.org.ua>
* Add changelog and fix unit test
The builtins import was removed since it was unused, but it is now needed.
* Let get_file_attributes() work without `lsattr -v`
Change:
- module_utils's get_file_attributes() expects `lsattr -v` to work, but
in some cases, it may not.
- The function now takes an optional include_version bool parameter,
which removes this expectation.
- Places where we call get_file_attributes() without using the 'version'
it returns, we now call it with include_version=False.
Test Plan:
- New unit tests
Signed-off-by: Rick Elrod <rick@elrod.me>
* Revert "Change default file permissions so they are not world readable (#70221)"
This reverts commit 5260527c4a.
* Revert "Fix warning for new default permissions when mode is not specified (#70976)"
This reverts commit dc79528cc6.
* Change default file permissions so they are not world readable
CVE-2020-1736
Set the default permissions for files we create with atomic_move() to 0o0660. Track
which files we create that did not exist and warn if the module supports 'mode'
and it was not specified and the module did not call set_mode_if_different(). This allows the user to take action and specify a mode rather than using the defaults.
A code audit is needed to find all instances of modules that call atomic_move()
but do not call set_mode_if_different(). The findings need to be documented in
a changelog since we are not warning. Warning in those instances would be frustrating
to the user since they have no way to change the module code.
- use a set for storing list of created files
- just check the argument spac and params rather than using another property
- improve the warning message to include the default permissions
* Allow to specify collection_name separately for deprecation.
* Use new functionality in Ansible.
* Use new functionality in tests.
* Update tagging/untagging functions.
* Update pylint deprecated sanity test.
* Update validate-modules. Missing are basic checks for version_added (validate semantic version format for collections).
* Improve version validation. Re-add version_added validation.
* Make sure collection names are added to return docs before schema validation.
* Extra checks to avoid crashes on bad data.
* Make C# module utils code work, and update/extend tests.
* Add changelog fragment.
* Stop extracting collection name from potentially tagged versions/dates.
* Simplify C# code.
* Update Windows modules docs.
* Forgot semicolons.
To avoid issues with Flatcar Container Linux being unable to be found,
detect Flatcar distro name especially for hostname, just like CoreOS
Container Linux was supported.
See also https://github.com/ansible/ansible/issues/69516
* Track collection for version_added.
Validate *all* version numbers in validate-modules.
For tagged version numbers (i.e. version_added), consider source collection to chose validation.
* Make tagging/untagging functions more flexible.
* Tag all versions in doc fragments.
* Tag all deprecation versions issued by code.
* Make Display.deprecated() understand tagged versions.
* Extend validation to enforce tagged version numbers.
* Tag versions in tests.
* Lint and fix test.
* Mention collection name in collection loader's deprecation/removal messages.
* Fix error IDs.
* Handle tagged dates in Display.deprecated().
* Also require that removed_at_date and deprecated_aliases.date are tagged.
* Also automatically tag/untag removed_at_date; fix sanity module removal version check.
* Improve error message when invalid version number is used (like '2.14' in collections).
* Allow to deprecate options and aliases by date instead of only by version.
* Update display.deprecate().
* Adjust behavior to conform to tested behavior, extend tests, and improve C# style.
* Parse date and fail on invalid date.
This is mainly to make sure that people start using invalid dates, and we eventually have a mess to clean up.
* C# code: improve validation and update/extend tests.
* Make sure that deprecate() is not called with both date and version.
* Forgot to remove no longer necessary formatting.
* Adjust order of warnings in C# code.
* Adjust unrelated test.
* Fix grammar (and make that test pass).
* Don't parse date, and adjust message to be same as in #67684.
* Sanity tests: disable date in past test.
* Validate-modules: validate ISO 8601 date format.
* Validate-modules: switch schema declaration for deprecated_aliases to improve error messages for invalid dates.
* Use DateTime instead of string for date deprecation.
* Validate that date in deprecated_aliases is actually a DateTime.
* Fix tests.
* Fix rebasing error.
* Adjust error codes for pylint, and add removed_at_date and deprecated_aliases.date checks to validate-modules.
* Make deprecation date in the past error codes optional.
* Make sure not both version and date are specified for AnsibleModule.deprecate() calls.
* Stop using Python 3.7+ API.
* Make sure errors are actually reported. Re-add 'ansible-' prefix.
* Avoid crashing when 'name' isn't there.
* Linting.
* Update lib/ansible/module_utils/csharp/Ansible.Basic.cs
Co-authored-by: Jordan Borean <jborean93@gmail.com>
* Adjust test to latest change.
* Prefer date over version if both end up in Display.deprecated().
Co-authored-by: Jordan Borean <jborean93@gmail.com>
* Fix filedescriptor out of range in select() when running commands
* Simplify the run_command() code
Now that we're using selectors in run_command(), we can simplify some of
the code.
* Use fileobj.read() instead of os.read()
* No longer use get_buffer_size() as we can just slurp all of the data
instead.
Also use a simpler conditional check of whether the selector map is
empty
Co-authored-by: Toshio Kuratomi <a.badger@gmail.com>
fial_json() requires a message be given to it to inform the end user of
why the module failed. Prior to this commit, the message had to be a
keyword argument:
module.fail_json(msg='Failed due to error')
Since this is a required parameter, this commit allows the message to be
given as a positional argument instead:
module.fail_json('Failed due to an error')
* Move warn() and deprecate() methods out of basic.py
* Use _global_warnings and _global_deprications and create accessor functions
- This lays the foundation for future functions being moved outside of AnsibleModule
that need an interface to warnings and deprecations without modifying them.
* Add unit tests for new warn and deprecate functions
Abhijeet Kasurde