@ -125,60 +125,103 @@ options:
EXAMPLES = '''
# Allow everything and enable UFW
ufw : state = enabled policy = allow
- ufw :
state : enabled
policy : allow
# Set logging
ufw : logging = on
- ufw :
logging : on
# Sometimes it is desirable to let the sender know when traffic is
# being denied, rather than simply ignoring it. In these cases, use
# reject instead of deny. In addition, log rejected connections:
ufw : rule = reject port = auth log = yes
- ufw :
rule : reject
port : auth
log : yes
# ufw supports connection rate limiting, which is useful for protecting
# against brute-force login attacks. ufw will deny connections if an IP
# address has attempted to initiate 6 or more connections in the last
# 30 seconds. See http://www.debian-administration.org/articles/187
# for details. Typical usage is:
ufw : rule = limit port = ssh proto = tcp
- ufw :
rule : limit
port : ssh
proto : tcp
# Allow OpenSSH. (Note that as ufw manages its own state, simply removing
# a rule=allow task can leave those ports exposed. Either use delete=yes
# or a separate state=reset task)
ufw : rule = allow name = OpenSSH
- ufw :
rule : allow
name : OpenSSH
# Delete OpenSSH rule
ufw : rule = allow name = OpenSSH delete = yes
- ufw :
rule : allow
name : OpenSSH
delete : yes
# Deny all access to port 53:
ufw : rule = deny port = 53
- ufw :
rule : deny
port : 53
# Allow port range 60000-61000
ufw : rule = allow port = 60000 : 61000
- ufw :
rule : allow
port : ' 60000:61000 '
# Allow all access to tcp port 80:
ufw : rule = allow port = 80 proto = tcp
- ufw :
rule : allow
port : 80
proto : tcp
# Allow all access from RFC1918 networks to this host:
ufw : rule = allow src = { { item } }
with_items :
- 10.0 .0 .0 / 8
- 172.16 .0 .0 / 12
- 192.168 .0 .0 / 16
- ufw :
rule : allow
src : ' {{ item }} '
with_items :
- 10.0 .0 .0 / 8
- 172.16 .0 .0 / 12
- 192.168 .0 .0 / 16
# Deny access to udp port 514 from host 1.2.3.4:
ufw : rule = deny proto = udp src = 1.2 .3 .4 port = 514
- ufw :
rule : deny
proto : udp
src : 1.2 .3 .4
port : 514
# Allow incoming access to eth0 from 1.2.3.5 port 5469 to 1.2.3.4 port 5469
ufw : rule = allow interface = eth0 direction = in proto = udp src = 1.2 .3 .5 from_port = 5469 dest = 1.2 .3 .4 to_port = 5469
- ufw :
rule : allow
interface : eth0
direction : in
proto : udp
src : 1.2 .3 .5
from_port : 5469
dest : 1.2 .3 .4
to_port : 5469
# Deny all traffic from the IPv6 2001:db8::/32 to tcp port 25 on this host.
# Note that IPv6 must be enabled in /etc/default/ufw for IPv6 firewalling to work.
ufw : rule = deny proto = tcp src = 2001 : db8 : : / 32 port = 25
- ufw :
rule : deny
proto : tcp
src : ' 2001:db8::/32 '
port : 25
# Deny forwarded/routed traffic from subnet 1.2.3.0/24 to subnet 4.5.6.0/24.
# Can be used to further restrict a global FORWARD policy set to allow
ufw : rule = deny route = yes src = 1.2 .3 .0 / 24 dest = 4.5 .6 .0 / 24
- ufw :
rule : deny
route : yes
src : 1.2 .3 .0 / 24
dest : 4.5 .6 .0 / 24
'''
from operator import itemgetter