|
|
|
---
|
|
|
|
- debug: msg="START connection={{ ansible_connection }} nxos_vpc sanity test"
|
|
|
|
- debug: msg="Using provider={{ connection.transport }}"
|
|
|
|
when: ansible_connection == "local"
|
|
|
|
|
|
|
|
- block:
|
nxos_vpc:Fix multiple idempotency issues, add missing commands (#55735)
* nxos_vpc:Fix idempotency issues with multiple attributes
Several attributes were causing idempotency problems on various platforms:
- `auto_recovery`
- This command can be disabled on certain platforms and will nvgen as `no auto-recovery`
- When enabled it has an additional optional-keyword for changing the `reload-delay` timer value
- This was addressed by adding a new attribute `auto_recovery_reload_delay` to handle setting the timer value
- This new attribute is mutually exclusive with `auto_recovery`
- `/show run vpc/show run vpc all/`
- Changed the command that gets state to `all` so that it could differentiate between `auto-recovery` and `auto-recovery reload-delay`
- This change resulted in also changing some attribute handling withing `get_vpc`, since some attributes like `peer_gw` relied on presence of the config to determine state true or false. With `all` the config is always there so these attrs must specifically check for `'no '` in the string.
- `delay_restore`
- This command has two additional, optional keywords that exist on some platforms and not others.
- New attrs:
- `delay_restore_interface_vlan`
- `delay_restore_orphan_port`
- Modified the `sanity` test to include the new attributes and to fix the platform issues.
- Bugfix Pull Request
`modules/network/nxos/nxos_vpc.py`
- Validated `nxos_vpc` `sanity` test on these platforms, all are now 100% Pass: N35, N3K, N3K-F, N6K, N7K, N9K, N9K-F
- TBD: Future work is needed to add support for `peer_gw_exclude_gw` timers. This could be addressed in the same way as the `auto_recovery_reload_delay` changes included here.
* lint fix
* Add 'version_added' tags for new options
6 years ago
|
|
|
- set_fact: delay_restore_orphan_port=25
|
|
|
|
- set_fact: def_delay_restore_orphan_port=default
|
|
|
|
when: platform is not search("N35|N5K|N6K")
|
|
|
|
|
|
|
|
- block:
|
|
|
|
- name: disable vpc for initial vpc config cleanup
|
|
|
|
nxos_feature:
|
|
|
|
feature: vpc
|
|
|
|
provider: "{{ connection }}"
|
|
|
|
state: disabled
|
|
|
|
|
|
|
|
- name: enable feature vpc
|
|
|
|
nxos_feature:
|
|
|
|
feature: vpc
|
|
|
|
provider: "{{ connection }}"
|
|
|
|
state: enabled
|
|
|
|
|
|
|
|
- name: Ensure ntc VRF exists on switch
|
|
|
|
nxos_vrf:
|
|
|
|
vrf: ntc
|
|
|
|
provider: "{{ connection }}"
|
|
|
|
|
|
|
|
- name: Configure vpc
|
|
|
|
nxos_vpc: &conf_vpc
|
|
|
|
provider: "{{ connection }}"
|
|
|
|
state: present
|
|
|
|
domain: 100
|
|
|
|
pkl_dest: 192.168.100.4
|
|
|
|
pkl_src: 10.1.100.20
|
|
|
|
pkl_vrf: ntc
|
|
|
|
register: result
|
|
|
|
|
|
|
|
- assert: &true
|
|
|
|
that:
|
|
|
|
- "result.changed == true"
|
|
|
|
|
|
|
|
- name: "Conf Idempotence"
|
|
|
|
nxos_vpc: *conf_vpc
|
|
|
|
register: result
|
|
|
|
|
|
|
|
- assert: &false
|
|
|
|
that:
|
|
|
|
- "result.changed == false"
|
|
|
|
|
|
|
|
- name: Configure vpc1
|
|
|
|
nxos_vpc: &conf_vpc1
|
|
|
|
provider: "{{ connection }}"
|
|
|
|
state: present
|
|
|
|
domain: 100
|
|
|
|
role_priority: 500
|
|
|
|
system_priority: 2000
|
|
|
|
peer_gw: True
|
|
|
|
delay_restore: 5
|
nxos_vpc:Fix multiple idempotency issues, add missing commands (#55735)
* nxos_vpc:Fix idempotency issues with multiple attributes
Several attributes were causing idempotency problems on various platforms:
- `auto_recovery`
- This command can be disabled on certain platforms and will nvgen as `no auto-recovery`
- When enabled it has an additional optional-keyword for changing the `reload-delay` timer value
- This was addressed by adding a new attribute `auto_recovery_reload_delay` to handle setting the timer value
- This new attribute is mutually exclusive with `auto_recovery`
- `/show run vpc/show run vpc all/`
- Changed the command that gets state to `all` so that it could differentiate between `auto-recovery` and `auto-recovery reload-delay`
- This change resulted in also changing some attribute handling withing `get_vpc`, since some attributes like `peer_gw` relied on presence of the config to determine state true or false. With `all` the config is always there so these attrs must specifically check for `'no '` in the string.
- `delay_restore`
- This command has two additional, optional keywords that exist on some platforms and not others.
- New attrs:
- `delay_restore_interface_vlan`
- `delay_restore_orphan_port`
- Modified the `sanity` test to include the new attributes and to fix the platform issues.
- Bugfix Pull Request
`modules/network/nxos/nxos_vpc.py`
- Validated `nxos_vpc` `sanity` test on these platforms, all are now 100% Pass: N35, N3K, N3K-F, N6K, N7K, N9K, N9K-F
- TBD: Future work is needed to add support for `peer_gw_exclude_gw` timers. This could be addressed in the same way as the `auto_recovery_reload_delay` changes included here.
* lint fix
* Add 'version_added' tags for new options
6 years ago
|
|
|
delay_restore_interface_vlan: 15
|
|
|
|
delay_restore_orphan_port: "{{ delay_restore_orphan_port|default(omit) }}"
|
|
|
|
register: result
|
|
|
|
|
|
|
|
- assert: *true
|
|
|
|
|
|
|
|
- name: "Conf Idempotence"
|
|
|
|
nxos_vpc: *conf_vpc1
|
|
|
|
register: result
|
|
|
|
|
|
|
|
- assert: *false
|
|
|
|
|
|
|
|
- block:
|
nxos_vpc:Fix multiple idempotency issues, add missing commands (#55735)
* nxos_vpc:Fix idempotency issues with multiple attributes
Several attributes were causing idempotency problems on various platforms:
- `auto_recovery`
- This command can be disabled on certain platforms and will nvgen as `no auto-recovery`
- When enabled it has an additional optional-keyword for changing the `reload-delay` timer value
- This was addressed by adding a new attribute `auto_recovery_reload_delay` to handle setting the timer value
- This new attribute is mutually exclusive with `auto_recovery`
- `/show run vpc/show run vpc all/`
- Changed the command that gets state to `all` so that it could differentiate between `auto-recovery` and `auto-recovery reload-delay`
- This change resulted in also changing some attribute handling withing `get_vpc`, since some attributes like `peer_gw` relied on presence of the config to determine state true or false. With `all` the config is always there so these attrs must specifically check for `'no '` in the string.
- `delay_restore`
- This command has two additional, optional keywords that exist on some platforms and not others.
- New attrs:
- `delay_restore_interface_vlan`
- `delay_restore_orphan_port`
- Modified the `sanity` test to include the new attributes and to fix the platform issues.
- Bugfix Pull Request
`modules/network/nxos/nxos_vpc.py`
- Validated `nxos_vpc` `sanity` test on these platforms, all are now 100% Pass: N35, N3K, N3K-F, N6K, N7K, N9K, N9K-F
- TBD: Future work is needed to add support for `peer_gw_exclude_gw` timers. This could be addressed in the same way as the `auto_recovery_reload_delay` changes included here.
* lint fix
* Add 'version_added' tags for new options
6 years ago
|
|
|
# This block is only useful on platforms that nvgen 'no auto-recovery'.
|
|
|
|
# Note: auto_recovery is mutually_exclusive with auto_recovery_reload_delay.
|
|
|
|
- set_fact: def_auto_recovery=False
|
|
|
|
- set_fact: def_auto_recovery=True
|
|
|
|
when: platform is search("N7K")
|
|
|
|
|
|
|
|
- name: auto-recovery from default to non-default
|
|
|
|
nxos_vpc: &auto_recovery_1
|
|
|
|
provider: "{{ connection }}"
|
|
|
|
domain: 100
|
nxos_vpc:Fix multiple idempotency issues, add missing commands (#55735)
* nxos_vpc:Fix idempotency issues with multiple attributes
Several attributes were causing idempotency problems on various platforms:
- `auto_recovery`
- This command can be disabled on certain platforms and will nvgen as `no auto-recovery`
- When enabled it has an additional optional-keyword for changing the `reload-delay` timer value
- This was addressed by adding a new attribute `auto_recovery_reload_delay` to handle setting the timer value
- This new attribute is mutually exclusive with `auto_recovery`
- `/show run vpc/show run vpc all/`
- Changed the command that gets state to `all` so that it could differentiate between `auto-recovery` and `auto-recovery reload-delay`
- This change resulted in also changing some attribute handling withing `get_vpc`, since some attributes like `peer_gw` relied on presence of the config to determine state true or false. With `all` the config is always there so these attrs must specifically check for `'no '` in the string.
- `delay_restore`
- This command has two additional, optional keywords that exist on some platforms and not others.
- New attrs:
- `delay_restore_interface_vlan`
- `delay_restore_orphan_port`
- Modified the `sanity` test to include the new attributes and to fix the platform issues.
- Bugfix Pull Request
`modules/network/nxos/nxos_vpc.py`
- Validated `nxos_vpc` `sanity` test on these platforms, all are now 100% Pass: N35, N3K, N3K-F, N6K, N7K, N9K, N9K-F
- TBD: Future work is needed to add support for `peer_gw_exclude_gw` timers. This could be addressed in the same way as the `auto_recovery_reload_delay` changes included here.
* lint fix
* Add 'version_added' tags for new options
6 years ago
|
|
|
auto_recovery: "{{ not def_auto_recovery }}"
|
|
|
|
register: result
|
|
|
|
|
|
|
|
- assert: *true
|
|
|
|
|
nxos_vpc:Fix multiple idempotency issues, add missing commands (#55735)
* nxos_vpc:Fix idempotency issues with multiple attributes
Several attributes were causing idempotency problems on various platforms:
- `auto_recovery`
- This command can be disabled on certain platforms and will nvgen as `no auto-recovery`
- When enabled it has an additional optional-keyword for changing the `reload-delay` timer value
- This was addressed by adding a new attribute `auto_recovery_reload_delay` to handle setting the timer value
- This new attribute is mutually exclusive with `auto_recovery`
- `/show run vpc/show run vpc all/`
- Changed the command that gets state to `all` so that it could differentiate between `auto-recovery` and `auto-recovery reload-delay`
- This change resulted in also changing some attribute handling withing `get_vpc`, since some attributes like `peer_gw` relied on presence of the config to determine state true or false. With `all` the config is always there so these attrs must specifically check for `'no '` in the string.
- `delay_restore`
- This command has two additional, optional keywords that exist on some platforms and not others.
- New attrs:
- `delay_restore_interface_vlan`
- `delay_restore_orphan_port`
- Modified the `sanity` test to include the new attributes and to fix the platform issues.
- Bugfix Pull Request
`modules/network/nxos/nxos_vpc.py`
- Validated `nxos_vpc` `sanity` test on these platforms, all are now 100% Pass: N35, N3K, N3K-F, N6K, N7K, N9K, N9K-F
- TBD: Future work is needed to add support for `peer_gw_exclude_gw` timers. This could be addressed in the same way as the `auto_recovery_reload_delay` changes included here.
* lint fix
* Add 'version_added' tags for new options
6 years ago
|
|
|
- name: "Conf Idempotence auto-recovery def-to-non-def"
|
|
|
|
nxos_vpc: *auto_recovery_1
|
|
|
|
register: result
|
|
|
|
|
|
|
|
- assert: *false
|
|
|
|
|
nxos_vpc:Fix multiple idempotency issues, add missing commands (#55735)
* nxos_vpc:Fix idempotency issues with multiple attributes
Several attributes were causing idempotency problems on various platforms:
- `auto_recovery`
- This command can be disabled on certain platforms and will nvgen as `no auto-recovery`
- When enabled it has an additional optional-keyword for changing the `reload-delay` timer value
- This was addressed by adding a new attribute `auto_recovery_reload_delay` to handle setting the timer value
- This new attribute is mutually exclusive with `auto_recovery`
- `/show run vpc/show run vpc all/`
- Changed the command that gets state to `all` so that it could differentiate between `auto-recovery` and `auto-recovery reload-delay`
- This change resulted in also changing some attribute handling withing `get_vpc`, since some attributes like `peer_gw` relied on presence of the config to determine state true or false. With `all` the config is always there so these attrs must specifically check for `'no '` in the string.
- `delay_restore`
- This command has two additional, optional keywords that exist on some platforms and not others.
- New attrs:
- `delay_restore_interface_vlan`
- `delay_restore_orphan_port`
- Modified the `sanity` test to include the new attributes and to fix the platform issues.
- Bugfix Pull Request
`modules/network/nxos/nxos_vpc.py`
- Validated `nxos_vpc` `sanity` test on these platforms, all are now 100% Pass: N35, N3K, N3K-F, N6K, N7K, N9K, N9K-F
- TBD: Future work is needed to add support for `peer_gw_exclude_gw` timers. This could be addressed in the same way as the `auto_recovery_reload_delay` changes included here.
* lint fix
* Add 'version_added' tags for new options
6 years ago
|
|
|
- name: auto-recovery from non-default to default
|
|
|
|
nxos_vpc: &auto_recovery_2
|
|
|
|
provider: "{{ connection }}"
|
|
|
|
domain: 100
|
nxos_vpc:Fix multiple idempotency issues, add missing commands (#55735)
* nxos_vpc:Fix idempotency issues with multiple attributes
Several attributes were causing idempotency problems on various platforms:
- `auto_recovery`
- This command can be disabled on certain platforms and will nvgen as `no auto-recovery`
- When enabled it has an additional optional-keyword for changing the `reload-delay` timer value
- This was addressed by adding a new attribute `auto_recovery_reload_delay` to handle setting the timer value
- This new attribute is mutually exclusive with `auto_recovery`
- `/show run vpc/show run vpc all/`
- Changed the command that gets state to `all` so that it could differentiate between `auto-recovery` and `auto-recovery reload-delay`
- This change resulted in also changing some attribute handling withing `get_vpc`, since some attributes like `peer_gw` relied on presence of the config to determine state true or false. With `all` the config is always there so these attrs must specifically check for `'no '` in the string.
- `delay_restore`
- This command has two additional, optional keywords that exist on some platforms and not others.
- New attrs:
- `delay_restore_interface_vlan`
- `delay_restore_orphan_port`
- Modified the `sanity` test to include the new attributes and to fix the platform issues.
- Bugfix Pull Request
`modules/network/nxos/nxos_vpc.py`
- Validated `nxos_vpc` `sanity` test on these platforms, all are now 100% Pass: N35, N3K, N3K-F, N6K, N7K, N9K, N9K-F
- TBD: Future work is needed to add support for `peer_gw_exclude_gw` timers. This could be addressed in the same way as the `auto_recovery_reload_delay` changes included here.
* lint fix
* Add 'version_added' tags for new options
6 years ago
|
|
|
auto_recovery: "{{ def_auto_recovery }}"
|
|
|
|
register: result
|
|
|
|
|
|
|
|
- assert: *true
|
|
|
|
|
nxos_vpc:Fix multiple idempotency issues, add missing commands (#55735)
* nxos_vpc:Fix idempotency issues with multiple attributes
Several attributes were causing idempotency problems on various platforms:
- `auto_recovery`
- This command can be disabled on certain platforms and will nvgen as `no auto-recovery`
- When enabled it has an additional optional-keyword for changing the `reload-delay` timer value
- This was addressed by adding a new attribute `auto_recovery_reload_delay` to handle setting the timer value
- This new attribute is mutually exclusive with `auto_recovery`
- `/show run vpc/show run vpc all/`
- Changed the command that gets state to `all` so that it could differentiate between `auto-recovery` and `auto-recovery reload-delay`
- This change resulted in also changing some attribute handling withing `get_vpc`, since some attributes like `peer_gw` relied on presence of the config to determine state true or false. With `all` the config is always there so these attrs must specifically check for `'no '` in the string.
- `delay_restore`
- This command has two additional, optional keywords that exist on some platforms and not others.
- New attrs:
- `delay_restore_interface_vlan`
- `delay_restore_orphan_port`
- Modified the `sanity` test to include the new attributes and to fix the platform issues.
- Bugfix Pull Request
`modules/network/nxos/nxos_vpc.py`
- Validated `nxos_vpc` `sanity` test on these platforms, all are now 100% Pass: N35, N3K, N3K-F, N6K, N7K, N9K, N9K-F
- TBD: Future work is needed to add support for `peer_gw_exclude_gw` timers. This could be addressed in the same way as the `auto_recovery_reload_delay` changes included here.
* lint fix
* Add 'version_added' tags for new options
6 years ago
|
|
|
- name: "Conf Idempotence auto-recovery non-def-to-def"
|
|
|
|
nxos_vpc: *auto_recovery_2
|
|
|
|
register: result
|
|
|
|
|
|
|
|
- assert: *false
|
|
|
|
|
nxos_vpc:Fix multiple idempotency issues, add missing commands (#55735)
* nxos_vpc:Fix idempotency issues with multiple attributes
Several attributes were causing idempotency problems on various platforms:
- `auto_recovery`
- This command can be disabled on certain platforms and will nvgen as `no auto-recovery`
- When enabled it has an additional optional-keyword for changing the `reload-delay` timer value
- This was addressed by adding a new attribute `auto_recovery_reload_delay` to handle setting the timer value
- This new attribute is mutually exclusive with `auto_recovery`
- `/show run vpc/show run vpc all/`
- Changed the command that gets state to `all` so that it could differentiate between `auto-recovery` and `auto-recovery reload-delay`
- This change resulted in also changing some attribute handling withing `get_vpc`, since some attributes like `peer_gw` relied on presence of the config to determine state true or false. With `all` the config is always there so these attrs must specifically check for `'no '` in the string.
- `delay_restore`
- This command has two additional, optional keywords that exist on some platforms and not others.
- New attrs:
- `delay_restore_interface_vlan`
- `delay_restore_orphan_port`
- Modified the `sanity` test to include the new attributes and to fix the platform issues.
- Bugfix Pull Request
`modules/network/nxos/nxos_vpc.py`
- Validated `nxos_vpc` `sanity` test on these platforms, all are now 100% Pass: N35, N3K, N3K-F, N6K, N7K, N9K, N9K-F
- TBD: Future work is needed to add support for `peer_gw_exclude_gw` timers. This could be addressed in the same way as the `auto_recovery_reload_delay` changes included here.
* lint fix
* Add 'version_added' tags for new options
6 years ago
|
|
|
when: platform is search("N35|N7K|N3K-F|N9K-F")
|
|
|
|
|
nxos_vpc:Fix multiple idempotency issues, add missing commands (#55735)
* nxos_vpc:Fix idempotency issues with multiple attributes
Several attributes were causing idempotency problems on various platforms:
- `auto_recovery`
- This command can be disabled on certain platforms and will nvgen as `no auto-recovery`
- When enabled it has an additional optional-keyword for changing the `reload-delay` timer value
- This was addressed by adding a new attribute `auto_recovery_reload_delay` to handle setting the timer value
- This new attribute is mutually exclusive with `auto_recovery`
- `/show run vpc/show run vpc all/`
- Changed the command that gets state to `all` so that it could differentiate between `auto-recovery` and `auto-recovery reload-delay`
- This change resulted in also changing some attribute handling withing `get_vpc`, since some attributes like `peer_gw` relied on presence of the config to determine state true or false. With `all` the config is always there so these attrs must specifically check for `'no '` in the string.
- `delay_restore`
- This command has two additional, optional keywords that exist on some platforms and not others.
- New attrs:
- `delay_restore_interface_vlan`
- `delay_restore_orphan_port`
- Modified the `sanity` test to include the new attributes and to fix the platform issues.
- Bugfix Pull Request
`modules/network/nxos/nxos_vpc.py`
- Validated `nxos_vpc` `sanity` test on these platforms, all are now 100% Pass: N35, N3K, N3K-F, N6K, N7K, N9K, N9K-F
- TBD: Future work is needed to add support for `peer_gw_exclude_gw` timers. This could be addressed in the same way as the `auto_recovery_reload_delay` changes included here.
* lint fix
* Add 'version_added' tags for new options
6 years ago
|
|
|
- name: Configure auto-recovery reload-delay
|
|
|
|
nxos_vpc: &auto_reload
|
|
|
|
provider: "{{ connection }}"
|
|
|
|
domain: 100
|
|
|
|
auto_recovery_reload_delay: 242
|
|
|
|
register: result
|
|
|
|
|
nxos_vpc:Fix multiple idempotency issues, add missing commands (#55735)
* nxos_vpc:Fix idempotency issues with multiple attributes
Several attributes were causing idempotency problems on various platforms:
- `auto_recovery`
- This command can be disabled on certain platforms and will nvgen as `no auto-recovery`
- When enabled it has an additional optional-keyword for changing the `reload-delay` timer value
- This was addressed by adding a new attribute `auto_recovery_reload_delay` to handle setting the timer value
- This new attribute is mutually exclusive with `auto_recovery`
- `/show run vpc/show run vpc all/`
- Changed the command that gets state to `all` so that it could differentiate between `auto-recovery` and `auto-recovery reload-delay`
- This change resulted in also changing some attribute handling withing `get_vpc`, since some attributes like `peer_gw` relied on presence of the config to determine state true or false. With `all` the config is always there so these attrs must specifically check for `'no '` in the string.
- `delay_restore`
- This command has two additional, optional keywords that exist on some platforms and not others.
- New attrs:
- `delay_restore_interface_vlan`
- `delay_restore_orphan_port`
- Modified the `sanity` test to include the new attributes and to fix the platform issues.
- Bugfix Pull Request
`modules/network/nxos/nxos_vpc.py`
- Validated `nxos_vpc` `sanity` test on these platforms, all are now 100% Pass: N35, N3K, N3K-F, N6K, N7K, N9K, N9K-F
- TBD: Future work is needed to add support for `peer_gw_exclude_gw` timers. This could be addressed in the same way as the `auto_recovery_reload_delay` changes included here.
* lint fix
* Add 'version_added' tags for new options
6 years ago
|
|
|
- assert: *true
|
|
|
|
|
nxos_vpc:Fix multiple idempotency issues, add missing commands (#55735)
* nxos_vpc:Fix idempotency issues with multiple attributes
Several attributes were causing idempotency problems on various platforms:
- `auto_recovery`
- This command can be disabled on certain platforms and will nvgen as `no auto-recovery`
- When enabled it has an additional optional-keyword for changing the `reload-delay` timer value
- This was addressed by adding a new attribute `auto_recovery_reload_delay` to handle setting the timer value
- This new attribute is mutually exclusive with `auto_recovery`
- `/show run vpc/show run vpc all/`
- Changed the command that gets state to `all` so that it could differentiate between `auto-recovery` and `auto-recovery reload-delay`
- This change resulted in also changing some attribute handling withing `get_vpc`, since some attributes like `peer_gw` relied on presence of the config to determine state true or false. With `all` the config is always there so these attrs must specifically check for `'no '` in the string.
- `delay_restore`
- This command has two additional, optional keywords that exist on some platforms and not others.
- New attrs:
- `delay_restore_interface_vlan`
- `delay_restore_orphan_port`
- Modified the `sanity` test to include the new attributes and to fix the platform issues.
- Bugfix Pull Request
`modules/network/nxos/nxos_vpc.py`
- Validated `nxos_vpc` `sanity` test on these platforms, all are now 100% Pass: N35, N3K, N3K-F, N6K, N7K, N9K, N9K-F
- TBD: Future work is needed to add support for `peer_gw_exclude_gw` timers. This could be addressed in the same way as the `auto_recovery_reload_delay` changes included here.
* lint fix
* Add 'version_added' tags for new options
6 years ago
|
|
|
- name: "Conf Idempotence auto-recovery reload-delay"
|
|
|
|
nxos_vpc: *auto_reload
|
|
|
|
register: result
|
|
|
|
|
nxos_vpc:Fix multiple idempotency issues, add missing commands (#55735)
* nxos_vpc:Fix idempotency issues with multiple attributes
Several attributes were causing idempotency problems on various platforms:
- `auto_recovery`
- This command can be disabled on certain platforms and will nvgen as `no auto-recovery`
- When enabled it has an additional optional-keyword for changing the `reload-delay` timer value
- This was addressed by adding a new attribute `auto_recovery_reload_delay` to handle setting the timer value
- This new attribute is mutually exclusive with `auto_recovery`
- `/show run vpc/show run vpc all/`
- Changed the command that gets state to `all` so that it could differentiate between `auto-recovery` and `auto-recovery reload-delay`
- This change resulted in also changing some attribute handling withing `get_vpc`, since some attributes like `peer_gw` relied on presence of the config to determine state true or false. With `all` the config is always there so these attrs must specifically check for `'no '` in the string.
- `delay_restore`
- This command has two additional, optional keywords that exist on some platforms and not others.
- New attrs:
- `delay_restore_interface_vlan`
- `delay_restore_orphan_port`
- Modified the `sanity` test to include the new attributes and to fix the platform issues.
- Bugfix Pull Request
`modules/network/nxos/nxos_vpc.py`
- Validated `nxos_vpc` `sanity` test on these platforms, all are now 100% Pass: N35, N3K, N3K-F, N6K, N7K, N9K, N9K-F
- TBD: Future work is needed to add support for `peer_gw_exclude_gw` timers. This could be addressed in the same way as the `auto_recovery_reload_delay` changes included here.
* lint fix
* Add 'version_added' tags for new options
6 years ago
|
|
|
- assert: *false
|
|
|
|
|
|
|
|
- name: Configure vpc2
|
|
|
|
nxos_vpc: &conf_vpc2
|
|
|
|
provider: "{{ connection }}"
|
|
|
|
state: present
|
|
|
|
domain: 100
|
|
|
|
role_priority: default
|
|
|
|
system_priority: default
|
|
|
|
peer_gw: True
|
|
|
|
delay_restore: default
|
nxos_vpc:Fix multiple idempotency issues, add missing commands (#55735)
* nxos_vpc:Fix idempotency issues with multiple attributes
Several attributes were causing idempotency problems on various platforms:
- `auto_recovery`
- This command can be disabled on certain platforms and will nvgen as `no auto-recovery`
- When enabled it has an additional optional-keyword for changing the `reload-delay` timer value
- This was addressed by adding a new attribute `auto_recovery_reload_delay` to handle setting the timer value
- This new attribute is mutually exclusive with `auto_recovery`
- `/show run vpc/show run vpc all/`
- Changed the command that gets state to `all` so that it could differentiate between `auto-recovery` and `auto-recovery reload-delay`
- This change resulted in also changing some attribute handling withing `get_vpc`, since some attributes like `peer_gw` relied on presence of the config to determine state true or false. With `all` the config is always there so these attrs must specifically check for `'no '` in the string.
- `delay_restore`
- This command has two additional, optional keywords that exist on some platforms and not others.
- New attrs:
- `delay_restore_interface_vlan`
- `delay_restore_orphan_port`
- Modified the `sanity` test to include the new attributes and to fix the platform issues.
- Bugfix Pull Request
`modules/network/nxos/nxos_vpc.py`
- Validated `nxos_vpc` `sanity` test on these platforms, all are now 100% Pass: N35, N3K, N3K-F, N6K, N7K, N9K, N9K-F
- TBD: Future work is needed to add support for `peer_gw_exclude_gw` timers. This could be addressed in the same way as the `auto_recovery_reload_delay` changes included here.
* lint fix
* Add 'version_added' tags for new options
6 years ago
|
|
|
delay_restore_interface_vlan: default
|
|
|
|
delay_restore_orphan_port: "{{ def_delay_restore_orphan_port|default(omit) }}"
|
|
|
|
register: result
|
|
|
|
|
|
|
|
- assert: *true
|
|
|
|
|
|
|
|
- name: "Conf Idempotence"
|
|
|
|
nxos_vpc: *conf_vpc2
|
|
|
|
register: result
|
|
|
|
|
|
|
|
- assert: *false
|
|
|
|
|
|
|
|
- name: Configure vpc3
|
|
|
|
nxos_vpc: &conf_vpc3
|
|
|
|
provider: "{{ connection }}"
|
|
|
|
state: present
|
|
|
|
domain: 100
|
|
|
|
peer_gw: False
|
|
|
|
register: result
|
|
|
|
|
|
|
|
- assert: *true
|
|
|
|
|
|
|
|
- name: "Conf Idempotence"
|
|
|
|
nxos_vpc: *conf_vpc3
|
|
|
|
register: result
|
|
|
|
|
|
|
|
- assert: *false
|
|
|
|
|
|
|
|
- name: remove vpc
|
|
|
|
nxos_vpc: &rem_vpc
|
|
|
|
provider: "{{ connection }}"
|
|
|
|
state: absent
|
|
|
|
domain: 100
|
|
|
|
register: result
|
|
|
|
|
|
|
|
- assert: *true
|
|
|
|
|
|
|
|
- name: "Remove Idempotence"
|
|
|
|
nxos_vpc: *rem_vpc
|
|
|
|
register: result
|
|
|
|
|
|
|
|
- assert: *false
|
|
|
|
|
|
|
|
always:
|
|
|
|
- name: remove vrf
|
|
|
|
nxos_vrf:
|
|
|
|
vrf: ntc
|
|
|
|
provider: "{{ connection }}"
|
|
|
|
state: absent
|
|
|
|
ignore_errors: yes
|
|
|
|
|
|
|
|
- name: disable feature vpc
|
|
|
|
nxos_feature:
|
|
|
|
feature: vpc
|
|
|
|
provider: "{{ connection }}"
|
|
|
|
state: disabled
|
|
|
|
ignore_errors: yes
|
|
|
|
|
|
|
|
- debug: msg="END connection={{ ansible_connection }} nxos_vpc sanity test"
|