You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
ansible/docs/docsite/rst/installation_guide/intro_installation.rst

702 lines
27 KiB
ReStructuredText

.. _installation_guide:
.. _intro_installation_guide:
******************
Installing Ansible
******************
Ansible is an agentless automation tool that you install on a control node. From the control node, Ansible manages machines and other devices remotely (by default, over the SSH protocol).
To install Ansible for use at the command line, simply install the Ansible package on one machine (which could easily be a laptop). You do not need to install a database or run any daemons. Ansible can manage an entire fleet of remote machines from that one control node.
.. contents::
:local:
Prerequisites
=============
13 years ago
Before you install Ansible, review the requirements for a control node. Before you use Ansible, review the requirements for managed nodes (those end devices you want to automate). Control nodes and managed nodes have different minimum requirements.
.. _control_node_requirements:
Control node requirements
-------------------------
For your control node (the machine that runs Ansible), you can use any machine with Python 3.8 or newer installed.
This includes Red Hat, Debian, CentOS, macOS, any of the BSDs, and so on.
Windows is not supported for the control node, read more about this in `Matt Davis's blog post <http://blog.rolpdog.com/2020/03/why-no-ansible-controller-for-windows.html>`_.
.. warning::
Please note that some plugins that run on the control node have additional requirements. These requirements should be listed in the plugin documentation.
When choosing a control node, remember that any management system benefits from being run near the machines being managed. If you are using Ansible to manage machines in a cloud, consider using a machine inside that cloud as your control node. In most cases Ansible will perform better from a machine on the cloud than from a machine on the open Internet.
.. warning::
Ansible 2.11 will make Python 3.8 a soft dependency for the control node, but will function with the aforementioned requirements. Ansible 2.12 will require Python 3.8 or newer to function on the control node. Starting with Ansible 2.11, the project will only be packaged for Python 3.8 and newer.
.. _managed_node_requirements:
Managed node requirements
-------------------------
Although you do not need a daemon on your managed nodes, you do need a way for Ansible to communicate with them. For most managed nodes, Ansible makes a connection over SSH and transfers modules using SFTP. If SSH works but SFTP is not available on some of your managed nodes, you can switch to SCP in :ref:`ansible.cfg <ansible_configuration_settings>`. For any machine or device that can run Python, you also need Python 2 (version 2.6 or later) or Python 3 (version 3.5 or later).
.. warning::
Please note that some modules have additional requirements that need to be satisfied on the 'target' machine (the managed node). These requirements should be listed in the module documentation.
13 years ago
.. note::
* If you have SELinux enabled on remote nodes, you will also want to install libselinux-python on them before using any copy/file/template related functions in Ansible. You can use the :ref:`yum module<yum_module>` or :ref:`dnf module<dnf_module>` in Ansible to install this package on remote systems that do not have it.
* By default, before the first Python module in a playbook runs on a host, Ansible attempts to discover a suitable Python interpreter on that host. You can override the discovery behavior by setting the :ref:`ansible_python_interpreter<ansible_python_interpreter>` inventory variable to a specific interpreter, and in other ways. See :ref:`interpreter_discovery` for details.
* Ansible's :ref:`raw module<raw_module>`, and the :ref:`script module<script_module>`, do not depend on a client side install of Python to run. Technically, you can use Ansible to install a compatible version of Python using the :ref:`raw module<raw_module>`, which then allows you to use everything else. For example, if you need to bootstrap Python 2 onto a RHEL-based system, you can install it as follows:
.. code-block:: shell
Become plugins (#50991) * [WIP] become plugins Move from hardcoded method to plugins for ease of use, expansion and overrides - load into connection as it is going to be the main consumer - play_context will also use to keep backwards compat API - ensure shell is used to construct commands when needed - migrate settings remove from base config in favor of plugin specific configs - cleanup ansible-doc - add become plugin docs - remove deprecated sudo/su code and keywords - adjust become options for cli - set plugin options from context - ensure config defs are avaialbe before instance - refactored getting the shell plugin, fixed tests - changed into regex as they were string matching, which does not work with random string generation - explicitly set flags for play context tests - moved plugin loading up front - now loads for basedir also - allow pyc/o for non m modules - fixes to tests and some plugins - migrate to play objects fro play_context - simiplify gathering - added utf8 headers - moved option setting - add fail msg to dzdo - use tuple for multiple options on fail/missing - fix relative plugin paths - shift from play context to play - all tasks already inherit this from play directly - remove obsolete 'set play' - correct environment handling - add wrap_exe option to pfexec - fix runas to noop - fixed setting play context - added password configs - removed required false - remove from doc building till they are ready future development: - deal with 'enable' and 'runas' which are not 'command wrappers' but 'state flags' and currently hardcoded in diff subsystems * cleanup remove callers to removed func removed --sudo cli doc refs remove runas become_exe ensure keyerorr on plugin also fix backwards compat, missing method is attributeerror, not ansible error get remote_user consistently ignore missing system_tmpdirs on plugin load correct config precedence add deprecation fix networking imports backwards compat for plugins using BECOME_METHODS * Port become_plugins to context.CLIARGS This is a work in progress: * Stop passing options around everywhere as we can use context.CLIARGS instead * Refactor make_become_commands as asked for by alikins * Typo in comment fix * Stop loading values from the cli in more than one place Both play and play_context were saving default values from the cli arguments directly. This changes things so that the default values are loaded into the play and then play_context takes them from there. * Rename BECOME_PLUGIN_PATH to DEFAULT_BECOME_PLUGIN_PATH As alikins said, all other plugin paths are named DEFAULT_plugintype_PLUGIN_PATH. If we're going to rename these, that should be done all at one time rather than piecemeal. * One to throw away This is a set of hacks to get setting FieldAttribute defaults to command line args to work. It's not fully done yet. After talking it over with sivel and jimi-c this should be done by fixing FieldAttributeBase and _get_parent_attribute() calls to do the right thing when there is a non-None default. What we want to be able to do ideally is something like this: class Base(FieldAttributeBase): _check_mode = FieldAttribute([..] default=lambda: context.CLIARGS['check']) class Play(Base): # lambda so that we have a chance to parse the command line args # before we get here. In the future we might be able to restructure # this so that the cli parsing code runs before these classes are # defined. class Task(Base): pass And still have a playbook like this function: --- - hosts: tasks: - command: whoami check_mode: True (The check_mode test that is added as a separate commit in this PR will let you test variations on this case). There's a few separate reasons that the code doesn't let us do this or a non-ugly workaround for this as written right now. The fix that jimi-c, sivel, and I talked about may let us do this or it may still require a workaround (but less ugly) (having one class that has the FieldAttributes with default values and one class that inherits from that but just overrides the FieldAttributes which now have defaults) * Revert "One to throw away" This reverts commit 23aa883cbed11429ef1be2a2d0ed18f83a3b8064. * Set FieldAttr defaults directly from CLIARGS * Remove dead code * Move timeout directly to PlayContext, it's never needed on Play * just for backwards compat, add a static version of BECOME_METHODS to constants * Make the become attr on the connection public, since it's used outside of the connection * Logic fix * Nuke connection testing if it supports specific become methods * Remove unused vars * Address rebase issues * Fix path encoding issue * Remove unused import * Various cleanups * Restore network_cli check in _low_level_execute_command * type improvements for cliargs_deferred_get and swap shallowcopy to default to False * minor cleanups * Allow the su plugin to work, since it doesn't define a prompt the same way * Fix up ksu become plugin * Only set prompt if build_become_command was called * Add helper to assist connection plugins in knowing they need to wait for a prompt * Fix tests and code expectations * Doc updates * Various additional minor cleanups * Make doas functional * Don't change connection signature, load become plugin from TaskExecutor * Remove unused imports * Add comment about setting the become plugin on the playcontext * Fix up tests for recent changes * Support 'Password:' natively for the doas plugin * Make default prompts raw * wording cleanups. ci_complete * Remove unrelated changes * Address spelling mistake * Restore removed test, and udpate to use new functionality * Add changelog fragment * Don't hard fail in set_attributes_from_cli on missing CLI keys * Remove unrelated change to loader * Remove internal deprecated FieldAttributes now * Emit deprecation warnings now
6 years ago
$ ansible myhost --become -m raw -a "yum install -y python2"
.. _what_version:
Selecting an Ansible artifact and version to install
====================================================
Starting with version 2.10, Ansible distributes two artifacts: a community package called ``ansible`` and a minimalist language and runtime called ``ansible-core`` (called `ansible-base` in version 2.10). Choose the Ansible artifact and version that matches your particular needs.
Installing the Ansible community package
----------------------------------------
The ``ansible`` package includes the Ansible language and runtime plus a range of community curated Collections. It recreates and expands on the functionality that was included in Ansible 2.9.
You can choose any of the following ways to install the Ansible community package:
* Install the latest release with your OS package manager (for Red Hat Enterprise Linux (TM), CentOS, Fedora, Debian, or Ubuntu).
* Install with ``pip`` (the Python package manager).
.. _install_core:
Installing `ansible-core`
-------------------------
Ansible also distributes a minimalist object called ``ansible-core`` (or ``ansible-base`` in version 2.10). It contains the Ansible language, runtime, and a short list of core modules and other plugins. You can build functionality on top of ``ansible-core`` by installing collections from Galaxy, Automation Hub, or any other source.
You can choose any of the following ways to install ``ansible-core``:
* Install ``ansible-core`` (version 2.11 and greater) or ``ansible-base`` (version 2.10) with ``pip``.
* Install ``ansible-core`` (version 2.11 and greater) RPM package with ``dnf``.
* Install ``ansible-core`` from source from the ansible/ansible GitHub repository to access the development (``devel``) version to develop or test the latest features.
.. note::
You should only run ``ansible-core`` from ``devel`` if you are modifying ``ansible-core``, or trying out features under development. This is a rapidly changing source of code and can become unstable at any point.
Ansible generally creates new releases twice a year. See :ref:`release_and_maintenance` for information on release timing and maintenance of older releases.
.. _from_pip:
Installing and upgrading Ansible with ``pip``
=============================================
Ansible can be installed on many systems with ``pip``, the Python package manager.
Prerequisites: Installing ``pip``
----------------------------------
If ``pip`` is not already available on your system, run the following commands to install it::
$ curl https://bootstrap.pypa.io/get-pip.py -o get-pip.py
$ python get-pip.py --user
You may need to perform some additional configuration before you are able to run Ansible. See the Python documentation on `installing to the user site`_ for more information.
.. _installing to the user site: https://packaging.python.org/tutorials/installing-packages/#installing-to-the-user-site
Installing Ansible with ``pip``
-------------------------------
.. note::
If you have Ansible 2.9 or older installed or Ansible 3, see :ref:`pip_upgrade`.
Once ``pip`` is installed, you can install Ansible::
$ python -m pip install --user ansible
In order to use the ``paramiko`` connection plugin or modules that require ``paramiko``, install the required module [1]_::
$ python -m pip install --user paramiko
If you wish to install Ansible globally, run the following commands::
$ sudo python get-pip.py
$ sudo python -m pip install ansible
.. note::
Running ``pip`` with ``sudo`` will make global changes to the system. Since ``pip`` does not coordinate with system package managers, it could make changes to your system that leaves it in an inconsistent or non-functioning state. This is particularly true for macOS. Installing with ``--user`` is recommended unless you understand fully the implications of modifying global files on the system.
.. note::
Older versions of ``pip`` default to http://pypi.python.org/simple, which no longer works.
Please make sure you have the latest version of ``pip`` before installing Ansible.
If you have an older version of ``pip`` installed, you can upgrade by following `pip's upgrade instructions <https://pip.pypa.io/en/stable/installing/#upgrading-pip>`_ .
.. _from_pip_venv:
Installing Ansible in a virtual environment with ``pip``
--------------------------------------------------------
.. note::
If you have Ansible 2.9 or older installed or Ansible 3, see :ref:`pip_upgrade`.
Ansible can also be installed inside a new or existing ``virtualenv``::
$ python -m virtualenv ansible # Create a virtualenv if one does not already exist
$ source ansible/bin/activate # Activate the virtual environment
$ python -m pip install ansible
.. _pip_upgrade:
Upgrading Ansible with ``pip``
------------------------------
Upgrading from 2.9 or earlier to 2.10
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Starting in version 2.10, Ansible is made of two packages. When you upgrade from version 2.9 and older to version 2.10 or later, you need to uninstall the old Ansible version (2.9 or earlier) before upgrading. If you do not uninstall the older version of Ansible, you will see the following message, and no change will be performed:
.. code-block:: console
Cannot install ansible-base with a pre-existing ansible==2.x installation.
Installing ansible-base with ansible-2.9 or older currently installed with
pip is known to cause problems. Please uninstall ansible and install the new
version:
pip uninstall ansible
pip install ansible-base
...
As explained by the message, to upgrade you must first remove the version of Ansible installed and then install it to the latest version.
.. code-block:: console
$ pip uninstall ansible
$ pip install ansible
Upgrading from Ansible 3 or ansible-core 2.10
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
``ansible-base`` only exists for version 2.10 and in Ansible 3. In 2.11 and later, the package is called ``ansible-core``. Before installing ``ansible-core`` or Ansible 4, you must uninstall ``ansible-base`` if you have installed Ansible 3 or ``ansible-base`` 2.10.
To upgrade to ``ansible-core``:
.. code-block:: bash
pip uninstall ansible-base
pip install ansible-core
To upgrade to Ansible 4:
.. code-block:: bash
pip uninstall ansible-base
pip install ansible
.. _installing_the_control_node:
.. _from_yum:
Installing Ansible on specific operating systems
================================================
Follow these instructions to install the Ansible community package on a variety of operating systems.
Installing Ansible on RHEL, CentOS, or Fedora
----------------------------------------------
On Fedora:
.. code-block:: bash
$ sudo dnf install ansible
On RHEL:
.. code-block:: bash
$ sudo yum install ansible
On CentOS:
.. code-block:: bash
$ sudo yum install epel-release
$ sudo yum install ansible
RPMs for currently supported versions of RHEL and CentOS are also available from `EPEL <https://fedoraproject.org/wiki/EPEL>`_.
Ansible can manage older operating systems that contain Python 2.6 or higher.
.. _from_apt:
Installing Ansible on Ubuntu
----------------------------
Ubuntu builds are available `in a PPA here <https://launchpad.net/~ansible/+archive/ubuntu/ansible>`_.
12 years ago
To configure the PPA on your machine and install Ansible run these commands:
12 years ago
12 years ago
.. code-block:: bash
$ sudo apt update
$ sudo apt install software-properties-common
$ sudo add-apt-repository --yes --update ppa:ansible/ansible
$ sudo apt install ansible
.. note:: On older Ubuntu distributions, "software-properties-common" is called "python-software-properties". You may want to use ``apt-get`` instead of ``apt`` in older versions. Also, be aware that only newer distributions (in other words, 18.04, 18.10, and so on) have a ``-u`` or ``--update`` flag, so adjust your script accordingly.
Installing Ansible on Debian
----------------------------
Debian users may use the same source as the Ubuntu PPA (using the following table).
.. list-table::
:header-rows: 1
* - Debian
-
- Ubuntu
* - Debian 11 (Bullseye)
- ->
- Ubuntu 20.04 (Focal)
* - Debian 10 (Buster)
- ->
- Ubuntu 18.04 (Bionic)
* - Debian 9 (Stretch)
- ->
- Ubuntu 16.04 (Xenial)
* - Debian 8 (Jessie)
- ->
- Ubuntu 14.04 (Trusty)
.. note::
As of Ansible 4.0.0, new releases will only be generated for Ubuntu 18.04 (Bionic) or later releases.
Add the following line to ``/etc/apt/sources.list`` or ``/etc/apt/sources.list.d/ansible.list``:
.. code-block:: bash
deb http://ppa.launchpad.net/ansible/ansible/ubuntu MATCHING_UBUNTU_CODENAME_HERE main
Example for Debian 11 (Bullseye)
.. code-block:: bash
deb http://ppa.launchpad.net/ansible/ansible/ubuntu focal main
Then run these commands:
.. code-block:: bash
$ sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 93C4A3FD7BB9C367
$ sudo apt update
$ sudo apt install ansible
Installing Ansible on Gentoo with portage
-----------------------------------------
.. code-block:: bash
$ emerge -av app-admin/ansible
To install the newest version, you may need to unmask the Ansible package prior to emerging:
.. code-block:: bash
$ echo 'app-admin/ansible' >> /etc/portage/package.accept_keywords
Installing Ansible on FreeBSD
-----------------------------
You can install Ansible on FreeBSD either from a package or from a port. See the FreeBSD handbook `Chapter 4. Installing Applications: Packages and Ports <https://docs.freebsd.org/en/books/handbook/ports/>`_. A best practice is to use the packages on the fresh installation of the system and both update and upgrade from the ports later. It's not recommended to mix the installation from packages and ports, that is, keep updating and upgrading from the ports. See the warning in the FreeBSD handbook `4.5. Using the Ports Collection <https://docs.freebsd.org/en/books/handbook/ports/#ports-using>`_.
FreeBSD packages
^^^^^^^^^^^^^^^^
The installation from the packages is simpler, compared to the installation from the ports. See the details in the FreeBSD handbook `4.3. Finding Software <https://docs.freebsd.org/en/books/handbook/ports/#ports-finding-applications>`_ and `4.4. Using pkg for Binary Package Management <https://docs.freebsd.org/en/books/handbook/ports/#pkgng-intro>`_. Take a look at available packages, for example:
.. code-block:: bash
shell> pkg search ansible
ansible-sshjail-1.1.0.35 Ansible connector for remote jails
py38-ansible-4.7.0 Radically simple IT automation
py38-ansible-base-2.10.15 Radically simple IT automation
py38-ansible-core-2.11.6 Radically simple IT automation
py38-ansible-iocage-g20200327,1 Ansible module for iocage
py38-ansible-kld-g20200803,1 Ansible module to load kernel modules or update /boot/loader.conf
py38-ansible-lint-5.3.2 Checks playbooks for sub-optimal practices and behaviour
py38-ansible-runner-2.0.2 Extensible embeddable ansible job runner
py38-ansible-sysrc-g20200803_1,1 Ansible module to set sysvars in rc.conf
py38-ansible2-2.9.27 Radically simple IT automation
Pick the flavor of the package (only py38 is available in the example above) and install the package (as a root, of course).
.. code-block:: bash
shell> pkg install py38-ansible
The dependencies will be installed automatically after you approve them. For example, the installation of py38-ansible depends on the packages listed below
.. code-block:: bash
shell> pkg info -d py38-ansible
py38-ansible-4.3.0:
py38-ansible-core-2.11.3
python38-3.8.12
py38-setuptools-57.0.0
FreeBSD ports
^^^^^^^^^^^^^
The installation from the ports is more complex, compared to the installation from the packages, but flexible. See the details in the FreeBSD handbook `4.5. Using the Ports Collection <https://docs.freebsd.org/en/books/handbook/ports/#ports-using>`_. To install Ansible from a port change the directory and install the port (as a root, of course)
.. code-block:: bash
shell> cd /usr/ports/sysutils/ansible
shell> make install clean
.. note::
If you want to learn more about flavors see Porter's Handbook `Chapter 7. Flavors <https://docs.freebsd.org/en/books/porters-handbook/flavors/>`_.
.. _on_macos:
Installing Ansible on macOS
---------------------------
The preferred way to install Ansible on a Mac is with ``pip``.
The instructions can be found in :ref:`from_pip`.
.. note::
macOS 12.3 removes the Python 2 installation. The official recommendation for installing Python on macOS for use by Ansible is to use the installer provided by `Python.org <https://www.python.org/downloads/macos/>`_.
Alternately, you can choose to manually execute ``/usr/bin/python3`` provided along with macOS, and follow the instructions to install the Xcode developer tools. This is not listed as the official recommendation due to the extra dependencies.
.. note::
If you have Ansible 2.9 or older installed or Ansible 3, see :ref:`pip_upgrade`.
.. _from_pkgutil:
Installing Ansible on Solaris
-----------------------------
Ansible is available for Solaris as `SysV package from OpenCSW <https://www.opencsw.org/packages/ansible/>`_.
.. code-block:: bash
# pkgadd -d http://get.opencsw.org/now
# /opt/csw/bin/pkgutil -i ansible
.. _from_pacman:
Installing Ansible on Arch Linux
---------------------------------
Ansible is available in the Community repository::
$ pacman -S ansible
The AUR has a PKGBUILD for pulling directly from GitHub called `ansible-core-git <https://aur.archlinux.org/packages/ansible-core-git>`_.
Also see the `Ansible <https://wiki.archlinux.org/index.php/Ansible>`_ page on the ArchWiki.
.. _from_sbopkg:
Installing Ansible on Slackware Linux
-------------------------------------
Ansible build script is available in the `SlackBuilds.org <https://slackbuilds.org/apps/ansible/>`_ repository.
Can be built and installed using `sbopkg <https://sbopkg.org/>`_.
Create queue with Ansible and all dependencies::
# sqg -p ansible
Build and install packages from a created queuefile (answer Q for question if sbopkg should use queue or package)::
# sbopkg -k -i ansible
.. _from swupd:
Installing Ansible on Clear Linux
---------------------------------
Ansible and its dependencies are available as part of the sysadmin host management bundle::
$ sudo swupd bundle-add sysadmin-hostmgmt
Update of the software will be managed by the swupd tool::
$ sudo swupd update
.. _from_pip_devel:
.. _getting_ansible:
.. _from_windows:
Installing Ansible on Windows
------------------------------
See :ref:`windows_faq_ansible`
Installing and running the ``devel`` branch from source
=======================================================
In Ansible 2.10 and later, the `ansible/ansible repository <https://github.com/ansible/ansible>`_ contains the code for basic features and functions, such as copying module code to managed nodes. This code is also known as ``ansible-core``.
New features are added to ``ansible-core`` on a branch called ``devel``. If you are testing new features, fixing bugs, or otherwise working with the development team on changes to the core code, you can install and run ``devel``.
.. note::
You should only install and run the ``devel`` branch if you are modifying ``ansible-core`` or trying out features under development. This is a rapidly changing source of code and can become unstable at any point.
.. note::
If you want to use Ansible AWX as the control node, do not install or run the ``devel`` branch of Ansible. Use an OS package manager (like ``apt`` or ``yum``) or ``pip`` to install a stable version.
If you are running Ansible from source, you may also wish to follow the `Ansible GitHub project <https://github.com/ansible/ansible>`_. We track issues, document bugs, and share feature ideas in this and other related repositories.
For more information on getting involved in the Ansible project, see the :ref:`ansible_community_guide`. For more information on creating Ansible modules and Collections, see the :ref:`developer_guide`.
Installing ``devel`` from GitHub with ``pip``
---------------------------------------------
You can install the ``devel`` branch of ``ansible-core`` directly from GitHub with ``pip``:
.. code-block:: bash
$ python -m pip install --user https://github.com/ansible/ansible/archive/devel.tar.gz
.. note::
If you have Ansible 2.9 or older installed or Ansible 3, see :ref:`pip_upgrade`.
You can replace ``devel`` in the URL mentioned above, with any other branch or tag on GitHub to install older versions of Ansible (prior to ``ansible-base`` 2.10.), tagged alpha or beta versions, and release candidates. This installs all of Ansible.
.. code-block:: bash
$ python -m pip install --user https://github.com/ansible/ansible/archive/stable-2.9.tar.gz
See :ref:`from_source` for instructions on how to run ``ansible-core`` directly from source.
Installing ``devel`` from GitHub by cloning
-------------------------------------------
You can install the ``devel`` branch of ``ansible-core`` by cloning the GitHub repository:
.. code-block:: bash
$ git clone https://github.com/ansible/ansible.git
$ cd ./ansible
The default branch is ``devel``.
.. _from_source:
Running the ``devel`` branch from a clone
-----------------------------------------
``ansible-core`` is easy to run from source. You do not need ``root`` permissions to use it and there is no software to actually install. No daemons or database setup are required.
Once you have installed the ``ansible-core`` repository by cloning, setup the Ansible environment:
Using Bash:
.. code-block:: bash
$ source ./hacking/env-setup
Using Fish::
$ source ./hacking/env-setup.fish
If you want to suppress spurious warnings/errors, use::
$ source ./hacking/env-setup -q
If you do not have ``pip`` installed in your version of Python, install it::
$ curl https://bootstrap.pypa.io/get-pip.py -o get-pip.py
$ python get-pip.py --user
Ansible also uses the following Python modules that need to be installed [1]_:
.. code-block:: bash
$ python -m pip install --user -r ./requirements.txt
To update the ``devel`` branch of ``ansible-core`` on your local machine, use pull-with-rebase so any local changes are replayed.
.. code-block:: bash
$ git pull --rebase
.. code-block:: bash
$ git pull --rebase #same as above
$ git submodule update --init --recursive
After you run the the env-setup script, you will be running from the source code. The default inventory file will be ``/etc/ansible/hosts``. You can optionally specify an inventory file (see :ref:`inventory`) other than ``/etc/ansible/hosts``:
.. code-block:: bash
$ echo "127.0.0.1" > ~/ansible_hosts
$ export ANSIBLE_INVENTORY=~/ansible_hosts
You can read more about the inventory file at :ref:`inventory`.
Confirming your installation
============================
Whatever method of installing Ansible you chose, you can test that it is installed correctly with a ping command:
.. code-block:: bash
$ ansible all -m ping --ask-pass
You can also use "sudo make install".
.. _tagged_releases:
Finding tarballs of tagged releases
===================================
If you are packaging Ansible or wanting to build a local package yourself, and you want to avoid a git checkout, you can use a tarball of a tagged release. You can download the latest stable release from PyPI's `ansible package page <https://pypi.org/project/ansible/>`_. If you need a specific older version, beta version, or release candidate, you can use the pattern ``pypi.python.org/packages/source/a/ansible/ansible-{{VERSION}}.tar.gz``. VERSION must be the full version number, for example 3.1.0 or 4.0.0b2. You can make VERSION a variable in your package managing system that you update in one place whenever you package a new version.
.. note::
If you are creating your own Ansible package, you must also download or package ``ansible-core`` (or ``ansible-base`` for packages based on 2.10.x) from PyPI as part of your Ansible package. You must specify a particular version. Visit the PyPI project pages to download files for `ansible-core <https://pypi.org/project/ansible-core/>`_ or `ansible-base <https://pypi.org/project/ansible-base/>`_.
These releases are also tagged in the `git repository <https://github.com/ansible/ansible/releases>`_ with the release version.
.. _shell_completion:
Adding Ansible command shell completion
=======================================
As of Ansible 2.9, you can add shell completion of the Ansible command line utilities by installing an optional dependency called ``argcomplete``. ``argcomplete`` supports bash, and has limited support for zsh and tcsh.
You can install ``python-argcomplete`` from EPEL on Red Hat Enterprise based distributions, and or from the standard OS repositories for many other distributions.
For more information about installation and configuration, see the `argcomplete documentation <https://kislyuk.github.io/argcomplete/>`_.
Installing ``argcomplete`` on RHEL, CentOS, or Fedora
-----------------------------------------------------
On Fedora:
.. code-block:: bash
$ sudo dnf install python-argcomplete
On RHEL and CentOS:
.. code-block:: bash
$ sudo yum install epel-release
$ sudo yum install python-argcomplete
Installing ``argcomplete`` with ``apt``
---------------------------------------
.. code-block:: bash
$ sudo apt install python3-argcomplete
Installing ``argcomplete`` with ``pip``
---------------------------------------
.. code-block:: bash
$ python -m pip install argcomplete
Configuring ``argcomplete``
---------------------------
There are 2 ways to configure ``argcomplete`` to allow shell completion of the Ansible command line utilities: globally or per command.
Global configuration
^^^^^^^^^^^^^^^^^^^^
Global completion requires bash 4.2.
.. code-block:: bash
$ sudo activate-global-python-argcomplete
This will write a bash completion file to a global location. Use ``--dest`` to change the location.
Per command configuration
^^^^^^^^^^^^^^^^^^^^^^^^^
If you do not have bash 4.2, you must register each script independently.
.. code-block:: bash
$ eval $(register-python-argcomplete ansible)
$ eval $(register-python-argcomplete ansible-config)
$ eval $(register-python-argcomplete ansible-console)
$ eval $(register-python-argcomplete ansible-doc)
$ eval $(register-python-argcomplete ansible-galaxy)
$ eval $(register-python-argcomplete ansible-inventory)
$ eval $(register-python-argcomplete ansible-playbook)
$ eval $(register-python-argcomplete ansible-pull)
$ eval $(register-python-argcomplete ansible-vault)
You should place the above commands into your shells profile file such as ``~/.profile`` or ``~/.bash_profile``.
Using ``argcomplete`` with zsh or tcsh
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
See the `argcomplete documentation <https://kislyuk.github.io/argcomplete/>`_.
.. seealso::
:ref:`intro_adhoc`
Examples of basic commands
:ref:`working_with_playbooks`
Learning ansible's configuration management language
:ref:`installation_faqs`
Ansible Installation related to FAQs
`Mailing List <https://groups.google.com/group/ansible-project>`_
Questions? Help? Ideas? Stop by the list on Google Groups
:ref:`communication_irc`
How to join Ansible chat channels
.. [1] ``paramiko`` was included in Ansible's ``requirements.txt`` prior to 2.8.