# -*- mode: ruby -*- # vi: set ft=ruby : # All Vagrant configuration is done below. The "2" in Vagrant.configure # configures the configuration version (we support older styles for # backwards compatibility). Please don't change it unless you know what # you're doing. Vagrant.configure("2") do |config| # Use the virtualbox provider with some common settings config.vm.provider "virtualbox" do |v| # Workaround Ubuntu 16.04 issue with Virtualbox where Box waits 5 minutes to start if network "cable" is not connected. # https://github.com/chef/bento/issues/682 #v.customize ["modifyvm", :id, "--cableconnected1", "on"] # Change network card to PCnet-FAST III # For NAT adapter #v.customize ["modifyvm", :id, "--nictype1", "Am79C973"] end config.vm.define "target1" do |target1| # The most common configuration options are documented and commented below. # For a complete reference, please see the online documentation at # https://docs.vagrantup.com. # Every Vagrant development environment requires a box. You can search for # boxes at https://vagrantcloud.com/search. target1.vm.box = "hashicorp/bionic64" # target.vm.base_mac = "080027BB1475" target1.vm.hostname = "target1" target1.vm.define "target1" #target1.vm.synced_folder ".", "/vagrant" # Disable automatic box update checking. If you disable this, then # boxes will only be checked for updates when the user runs # `vagrant box outdated`. This is not recommended. # config.vm.box_check_update = false # Create a forwarded port mapping which allows access to a specific port # within the machine from a port on the host machine. In the example below, # accessing "localhost:8080" will access port 80 on the guest machine. # NOTE: This will enable public access to the opened port # config.vm.network "forwarded_port", guest: 80, host: 8080 # Create a forwarded port mapping which allows access to a specific port # within the machine from a port on the host machine and only allow access # via 127.0.0.1 to disable public access # config.vm.network "forwarded_port", guest: 80, host: 8080, host_ip: "127.0.0.1" # Create a private network, which allows host-only access to the machine # using a specific IP. # config.vm.network "private_network", ip: "192.168.33.10" # Create a public network, which generally matched to bridged network. # Bridged networks make the machine appear as another physical device on # your network. target1.vm.network "public_network", bridge: "enp4s0" # Share an additional folder to the guest VM. The first argument is # the path on the host to the actual folder. The second argument is # the path on the guest to mount the folder. And the optional third # argument is a set of non-required options. # config.vm.synced_folder "../data", "/vagrant_data" # Provider-specific configuration so you can fine-tune various # backing providers for Vagrant. These expose provider-specific options. # Example for VirtualBox: # # config.vm.provider "virtualbox" do |vb| # # Display the VirtualBox GUI when booting the machine # vb.gui = true # # # Customize the amount of memory on the VM: # vb.memory = "1024" # end # # View the documentation for the provider you are using for more # information on available options. # Enable provisioning with a shell script. Additional provisioners such as # Puppet, Chef, Ansible, Salt, and Docker are also available. Please see the # documentation for more information about their specific syntax and use. target1.vm.provision "shell", inline: <<-SHELL ls /vagrant cd /vagrant/target1 chmod +x bootstrap.sh ./bootstrap.sh # Install implant chmod +x hackme.sh ./hackme.sh SHELL end ######### # Windows target config.vm.define "target2" do |target2| target2.vm.box = "windows10_64" #target2.vm.base_mac = "080027BB1475" #target2.vm.hostname = "target2w" #target2.vm.define "target2w" target2.vm.network "public_network", bridge: "enp4s0" target2.vm.communicator = "winssh" target2.winssh.shell ="cmd" target2.vm.provider "virtualbox" do |vb2| # # Display the VirtualBox GUI when booting the machine vb2.gui = true # # # Customize the amount of memory on the VM: # vb.memory = "1024" end # Sync target2.vm.synced_folder ".", "/vagrant", disabled: true # config.vm.boot_timeout target2.ssh.username = "PURPLEDOME" target2.ssh.private_key_path = "target2w/id_rsa.3" end ######################## config.vm.define "target3" do |target3| # The most common configuration options are documented and commented below. # For a complete reference, please see the online documentation at # https://docs.vagrantup.com. # Every Vagrant development environment requires a box. You can search for # boxes at https://vagrantcloud.com/search. target3.vm.box = "ubuntu/groovy64" # target.vm.base_mac = "080027BB1475" target3.vm.hostname = "target3" target3.vm.define "target3" target3.vm.synced_folder ".", "/vagrant" # Disable automatic box update checking. If you disable this, then # boxes will only be checked for updates when the user runs # `vagrant box outdated`. This is not recommended. # config.vm.box_check_update = false # Create a forwarded port mapping which allows access to a specific port # within the machine from a port on the host machine. In the example below, # accessing "localhost:8080" will access port 80 on the guest machine. # NOTE: This will enable public access to the opened port # config.vm.network "forwarded_port", guest: 80, host: 8080 # Create a forwarded port mapping which allows access to a specific port # within the machine from a port on the host machine and only allow access # via 127.0.0.1 to disable public access # config.vm.network "forwarded_port", guest: 80, host: 8080, host_ip: "127.0.0.1" # Create a private network, which allows host-only access to the machine # using a specific IP. # config.vm.network "private_network", ip: "192.168.33.10" # target3.vm.network :private_network, ip: '192.168.178.163' # Create a public network, which generally matched to bridged network. # Bridged networks make the machine appear as another physical device on # your network. target3.vm.network "public_network", bridge: "enp4s0" # Share an additional folder to the guest VM. The first argument is # the path on the host to the actual folder. The second argument is # the path on the guest to mount the folder. And the optional third # argument is a set of non-required options. # config.vm.synced_folder "../data", "/vagrant_data" # Provider-specific configuration so you can fine-tune various # backing providers for Vagrant. These expose provider-specific options. # Example for VirtualBox: # # config.vm.provider "virtualbox" do |vb| # # Display the VirtualBox GUI when booting the machine # vb.gui = true # # # Customize the amount of memory on the VM: # vb.memory = "1024" # end # # View the documentation for the provider you are using for more # information on available options. # Enable provisioning with a shell script. Additional provisioners such as # Puppet, Chef, Ansible, Salt, and Docker are also available. Please see the # documentation for more information about their specific syntax and use. target3.vm.provision "shell", inline: <<-SHELL ls /vagrant cd /vagrant/target3 chmod +x bootstrap.sh sudo ./bootstrap.sh # Install implant #chmod +x hackme.sh #./hackme.sh SHELL end ##################################################### config.vm.define "attacker" do |attacker| # The most common configuration options are documented and commented below. # For a complete reference, please see the online documentation at # https://docs.vagrantup.com. # Every Vagrant development environment requires a box. You can search for # boxes at https://vagrantcloud.com/search. # https://app.vagrantup.com/kalilinux/boxes/rolling attacker.vm.box = "kalilinux/rolling" # config.vm.box_version = "2020.3.0" #config.vm.base_mac = "080027BB1476" attacker.vm.hostname = "attacker" # Disable automatic box update checking. If you disable this, then # boxes will only be checked for updates when the user runs # `vagrant box outdated`. This is not recommended. # config.vm.box_check_update = false # Create a forwarded port mapping which allows access to a specific port # within the machine from a port on the host machine. In the example below, # accessing "localhost:8080" will access port 80 on the guest machine. # NOTE: This will enable public access to the opened port # config.vm.network "forwarded_port", guest: 80, host: 8080 # Create a forwarded port mapping which allows access to a specific port # within the machine from a port on the host machine and only allow access # via 127.0.0.1 to disable public access # config.vm.network "forwarded_port", guest: 80, host: 8080, host_ip: "127.0.0.1" # Create a private network, which allows host-only access to the machine # using a specific IP. # config.vm.network "private_network", ip: "192.168.33.10" # Create a public network, which generally matched to bridged network. # Bridged networks make the machine appear as another physical device on # your network. attacker.vm.network "public_network", bridge: "enp4s0" # Share an additional folder to the guest VM. The first argument is # the path on the host to the actual folder. The second argument is # the path on the guest to mount the folder. And the optional third # argument is a set of non-required options. # config.vm.synced_folder "../data", "/vagrant_data" # Provider-specific configuration so you can fine-tune various # backing providers for Vagrant. These expose provider-specific options. # Example for VirtualBox: # #config.vm.provider "virtualbox" do |vb| # # Display the VirtualBox GUI when booting the machine # vb.gui = true # # # Customize the amount of memory on the VM: # vb.memory = "2048" # end # # View the documentation for the provider you are using for more # information on available options. # Enable provisioning with a shell script. Additional provisioners such as # Puppet, Chef, Ansible, Salt, and Docker are also available. Please see the # documentation for more information about their specific syntax and use. attacker.vm.provision "shell", inline: <<-SHELL echo "Attacker1 inline script start" ls /vagrant cd /vagrant/attacker1 chmod +x bootstrap.sh sudo ./bootstrap.sh echo "Attacker ready" SHELL end end