You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
PurpleDome/systems/Vagrantfile

294 lines
11 KiB
Plaintext

# -*- mode: ruby -*-
# vi: set ft=ruby :
# All Vagrant configuration is done below. The "2" in Vagrant.configure
# configures the configuration version (we support older styles for
# backwards compatibility). Please don't change it unless you know what
# you're doing.
Vagrant.configure("2") do |config|
# Use the virtualbox provider with some common settings
config.vm.provider "virtualbox" do |v|
# Workaround Ubuntu 16.04 issue with Virtualbox where Box waits 5 minutes to start if network "cable" is not connected.
# https://github.com/chef/bento/issues/682
#v.customize ["modifyvm", :id, "--cableconnected1", "on"]
# Change network card to PCnet-FAST III
# For NAT adapter
#v.customize ["modifyvm", :id, "--nictype1", "Am79C973"]
end
config.vm.define "target1" do |target1|
# The most common configuration options are documented and commented below.
# For a complete reference, please see the online documentation at
# https://docs.vagrantup.com.
# Every Vagrant development environment requires a box. You can search for
# boxes at https://vagrantcloud.com/search.
target1.vm.box = "hashicorp/bionic64"
# target.vm.base_mac = "080027BB1475"
target1.vm.hostname = "target1"
target1.vm.define "target1"
#target1.vm.synced_folder ".", "/vagrant"
# Disable automatic box update checking. If you disable this, then
# boxes will only be checked for updates when the user runs
# `vagrant box outdated`. This is not recommended.
# config.vm.box_check_update = false
# Create a forwarded port mapping which allows access to a specific port
# within the machine from a port on the host machine. In the example below,
# accessing "localhost:8080" will access port 80 on the guest machine.
# NOTE: This will enable public access to the opened port
# config.vm.network "forwarded_port", guest: 80, host: 8080
# Create a forwarded port mapping which allows access to a specific port
# within the machine from a port on the host machine and only allow access
# via 127.0.0.1 to disable public access
# config.vm.network "forwarded_port", guest: 80, host: 8080, host_ip: "127.0.0.1"
# Create a private network, which allows host-only access to the machine
# using a specific IP.
# config.vm.network "private_network", ip: "192.168.33.10"
# Create a public network, which generally matched to bridged network.
# Bridged networks make the machine appear as another physical device on
# your network.
target1.vm.network "public_network", bridge: "enp4s0"
# Share an additional folder to the guest VM. The first argument is
# the path on the host to the actual folder. The second argument is
# the path on the guest to mount the folder. And the optional third
# argument is a set of non-required options.
# config.vm.synced_folder "../data", "/vagrant_data"
# Provider-specific configuration so you can fine-tune various
# backing providers for Vagrant. These expose provider-specific options.
# Example for VirtualBox:
#
# config.vm.provider "virtualbox" do |vb|
# # Display the VirtualBox GUI when booting the machine
# vb.gui = true
#
# # Customize the amount of memory on the VM:
# vb.memory = "1024"
# end
#
# View the documentation for the provider you are using for more
# information on available options.
# Enable provisioning with a shell script. Additional provisioners such as
# Puppet, Chef, Ansible, Salt, and Docker are also available. Please see the
# documentation for more information about their specific syntax and use.
target1.vm.provision "shell", inline: <<-SHELL
ls /vagrant
cd /vagrant/target1
chmod +x bootstrap.sh
./bootstrap.sh
# Install implant
chmod +x hackme.sh
./hackme.sh
SHELL
end
#########
# Windows target
config.vm.define "target2" do |target2|
target2.vm.box = "windows10_64"
#target2.vm.base_mac = "080027BB1475"
#target2.vm.hostname = "target2w"
#target2.vm.define "target2w"
target2.vm.network "public_network", bridge: "enp4s0"
target2.vm.communicator = "winssh"
target2.winssh.shell ="cmd"
target2.vm.provider "virtualbox" do |vb2|
# # Display the VirtualBox GUI when booting the machine
vb2.gui = true
#
# # Customize the amount of memory on the VM:
# vb.memory = "1024"
end
# Sync
target2.vm.synced_folder ".", "/vagrant", disabled: true
# config.vm.boot_timeout
target2.ssh.username = "PURPLEDOME"
target2.ssh.private_key_path = "target2w/id_rsa.3"
end
########################
config.vm.define "target3" do |target3|
# The most common configuration options are documented and commented below.
# For a complete reference, please see the online documentation at
# https://docs.vagrantup.com.
# Every Vagrant development environment requires a box. You can search for
# boxes at https://vagrantcloud.com/search.
target3.vm.box = "ubuntu/impish64"
# target.vm.base_mac = "080027BB1475"
target3.vm.hostname = "target3"
target3.vm.define "target3"
target3.vm.synced_folder ".", "/vagrant"
target3.vm.provider "virtualbox" do |v|
v.memory = 2048
v.cpus = 4
end
# Disable automatic box update checking. If you disable this, then
# boxes will only be checked for updates when the user runs
# `vagrant box outdated`. This is not recommended.
# config.vm.box_check_update = false
# Create a forwarded port mapping which allows access to a specific port
# within the machine from a port on the host machine. In the example below,
# accessing "localhost:8080" will access port 80 on the guest machine.
# NOTE: This will enable public access to the opened port
# config.vm.network "forwarded_port", guest: 80, host: 8080
# Create a forwarded port mapping which allows access to a specific port
# within the machine from a port on the host machine and only allow access
# via 127.0.0.1 to disable public access
# config.vm.network "forwarded_port", guest: 80, host: 8080, host_ip: "127.0.0.1"
# Create a private network, which allows host-only access to the machine
# using a specific IP.
# config.vm.network "private_network", ip: "192.168.33.10"
# target3.vm.network :private_network, ip: '192.168.178.163'
# Create a public network, which generally matched to bridged network.
# Bridged networks make the machine appear as another physical device on
# your network.
target3.vm.network "public_network", bridge: "enp4s0"
# Share an additional folder to the guest VM. The first argument is
# the path on the host to the actual folder. The second argument is
# the path on the guest to mount the folder. And the optional third
# argument is a set of non-required options.
# config.vm.synced_folder "../data", "/vagrant_data"
# Provider-specific configuration so you can fine-tune various
# backing providers for Vagrant. These expose provider-specific options.
# Example for VirtualBox:
#
# config.vm.provider "virtualbox" do |vb|
# # Display the VirtualBox GUI when booting the machine
# vb.gui = true
#
# # Customize the amount of memory on the VM:
# vb.memory = "1024"
# end
#
# View the documentation for the provider you are using for more
# information on available options.
# Enable provisioning with a shell script. Additional provisioners such as
# Puppet, Chef, Ansible, Salt, and Docker are also available. Please see the
# documentation for more information about their specific syntax and use.
target3.vm.provision "shell", inline: <<-SHELL
ls /vagrant
cd /vagrant/target3
chmod +x bootstrap.sh
sudo ./bootstrap.sh
# Install implant
#chmod +x hackme.sh
#./hackme.sh
SHELL
end
#####################################################
config.vm.define "attacker" do |attacker|
# The most common configuration options are documented and commented below.
# For a complete reference, please see the online documentation at
# https://docs.vagrantup.com.
# Every Vagrant development environment requires a box. You can search for
# boxes at https://vagrantcloud.com/search.
# https://app.vagrantup.com/kalilinux/boxes/rolling
attacker.vm.box = "kalilinux/rolling"
attacker.vm.box_version = "2021.3.0"
#config.vm.base_mac = "080027BB1476"
attacker.vm.hostname = "attacker"
# Disable automatic box update checking. If you disable this, then
# boxes will only be checked for updates when the user runs
# `vagrant box outdated`. This is not recommended.
# config.vm.box_check_update = false
# Create a forwarded port mapping which allows access to a specific port
# within the machine from a port on the host machine. In the example below,
# accessing "localhost:8080" will access port 80 on the guest machine.
# NOTE: This will enable public access to the opened port
# config.vm.network "forwarded_port", guest: 80, host: 8080
# Create a forwarded port mapping which allows access to a specific port
# within the machine from a port on the host machine and only allow access
# via 127.0.0.1 to disable public access
# config.vm.network "forwarded_port", guest: 80, host: 8080, host_ip: "127.0.0.1"
# Create a private network, which allows host-only access to the machine
# using a specific IP.
# config.vm.network "private_network", ip: "192.168.33.10"
# Create a public network, which generally matched to bridged network.
# Bridged networks make the machine appear as another physical device on
# your network.
attacker.vm.network "public_network", bridge: "enp4s0"
# Share an additional folder to the guest VM. The first argument is
# the path on the host to the actual folder. The second argument is
# the path on the guest to mount the folder. And the optional third
# argument is a set of non-required options.
# config.vm.synced_folder "../data", "/vagrant_data"
# Provider-specific configuration so you can fine-tune various
# backing providers for Vagrant. These expose provider-specific options.
# Example for VirtualBox:
#
#config.vm.provider "virtualbox" do |vb|
# # Display the VirtualBox GUI when booting the machine
# vb.gui = true
#
# # Customize the amount of memory on the VM:
# vb.memory = "2048"
# end
#
# View the documentation for the provider you are using for more
# information on available options.
# Enable provisioning with a shell script. Additional provisioners such as
# Puppet, Chef, Ansible, Salt, and Docker are also available. Please see the
# documentation for more information about their specific syntax and use.
attacker.vm.provision "shell", inline: <<-SHELL
echo "Attacker1 inline script start"
ls /vagrant
cd /vagrant/attacker1
chmod +x bootstrap.sh
sudo ./bootstrap.sh
echo "Attacker ready"
SHELL
end
end