New translations finalizing-setup.md (Malay)

translations/ar_SA/docs/user-guide/archive/tiramisu/autoboot.md

@@ -11,7 +11,7 @@ Currently, every time you want to launch Tiramisu you will have to launch the He
 1. Press A to select `Check`.
 1. Select `Boot options`.
 1. You will be asked if you want to switch the boot title. Press A to select `Switch to PayloadLoader`.
-1. When the process finished, press A to shutdown the console.
+1. When the process is finished, press A to shutdown the console.
 1. The PayloadLoader will now be launched automatically on every boot.
     - To change the default boot title hold Start (+) on the Gamepad while booting the console. You cannot change the boot title until you set a default environment first.
     - Navigate the list using the D-Pad to hover on the title you want to autoboot in, then press the Y button to set this to your autoboot title.

translations/ar_SA/docs/user-guide/archive/tiramisu/finalizing-setup.md

@@ -14,7 +14,7 @@ We are going to make the Tiramisu environment start automatically when your cons
     - You might get a red warning screen telling you that updates aren't blocked properly. Press A to continue anyway. We're going to block updates in the "Blocking Updates" section below.
     - To open the Environment Loader in the future, you have to hold X while your Wii U is booting up.
 1. On the Tiramisu Boot Selector, the `Wii U Menu` should already be selected, press Y to set this to your default autobooting option, then press A to launch into the Wii U Menu.
-    - To open the Tiramisu Boot Selector in the future, you have hold START (+) while your Wii U is booting up.
+    - To open the Tiramisu Boot Selector in the future, you have to hold START (+) while your Wii U is booting up.
 
 ?> Once you're booted into the Tiramisu environment, you can open the Mii Maker at any time to get into the Homebrew Launcher. <br>Homebrew Launcher will be empty for first-time modders. Follow the rest of the guide to install apps into the Homebrew Launcher. <br>To get back into the Mii Maker, simply press the HOME button while in the Homebrew Launcher.
 

translations/ar_SA/docs/user-guide/archive/tiramisu/nand-backup.md

@@ -18,7 +18,7 @@ In case anything should go wrong in the later process and your Wii U ends up bri
     - Dump OTP: **yes**
     - Dump SEEPROM: **yes**
 1. Press the A button to start the dumping process.
-1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC.
+1. When the process is completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC.
 1. The files will appear on the root of the SD card.
 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` (and if you chose to go with a full backup, `every mlc.bin.part`) file to your computer.
 1. Delete the files from your SD Card to free up space.

translations/ar_SA/docs/user-guide/aroma/autoboot.md

@@ -4,11 +4,11 @@
 
 Currently, every time you want to launch Aroma you will have to launch the Health and Safety information app. If you wish to automatically launch into Aroma on every boot, you can autoboot the Health and Safety Information app.
 
-If you don't want to autoobot Aroma, you can skip this step and follow the Setting Up PayloadLoader section below.
+If you don't want to autoboot Aroma, you can skip this step and follow the Setting Up PayloadLoader section below.
 
 ### Instructions
 
-1. Start the console to boot into the Wii U Menu, launch the Health and Safety Information app.
+1. Start the console to boot into the Wii U Menu, and then launch the Health and Safety Information app.
 2. Press A to launch the `aroma` environment.
 3. Press A to launch the Wii U Menu.
 4. Once you are at the Wii U Menu, launch the PayloadLoader Installer.
@@ -33,6 +33,6 @@ Now, we are going to make the Aroma environment start automatically when your co
 3. On the Aroma Boot Selector, the `Wii U Menu` should already be selected, press Y to set this to your default autobooting option, then press A to launch into the Wii U Menu.
 
 4. Aroma will now be launched each time you boot the console (or load Health and Safety) and then straight into the Wii U Menu.
-   - To open the Aroma Boot Selector in the future, you have hold START (+) while the console is booting or loading the Health and Safety Information app.
+   - To open the Aroma Boot Selector in the future, you have to hold START (+) while the console is booting or loading the Health and Safety Information app.
    - Navigate the list using the D-Pad to hover on the title you want to autoboot in, then press the Y button to set this to your autoboot title.
    - Press A to launch the selected title.

translations/ar_SA/docs/user-guide/aroma/finalizing-setup.md

@@ -34,9 +34,15 @@ While Aroma's PayloadLoader already has built-in update blocking functionality,
 | [Bloopair](https://github.com/GaryOderNichts/Bloopair/) ([Download](https://github.com/GaryOderNichts/Bloopair/releases))          | Allows wirelessly connecting most popular Bluetooth capable controllers. | 1. Extract the contents of the newly downloaded `Bloopair_vX.X.X.zip` file. <br> 2. Copy the `30_bloopair.rpx` to the `wiiu/environments/aroma/modules/setup/` folder on the root of your SD Card. <br> 3. Copy the `wiiu` folder to the root of your SD Card. |
 | [Screenshot Plugin](https://github.com/wiiu-env/ScreenshotWUPS/) ([Download](https://github.com/wiiu-env/ScreenshotWUPS/releases)) | Allows taking screenshots directly to the SD Card.                       | 1. Extract the downloaded `screenshot_plugin_vX_X.zip` file. <br> 2. Copy the `screenshot.wps` to the `wiiu/environments/aroma/plugins` folder on the root of your SD Card.                                                                                          |
 
-### Booting Tiramisu
+### Pretendo Network
 
-If you find the need to boot into Tiramisu, for example, to use a legacy Homebrew app, do the following:
+Pretendo is a replacement service for the Nintendo Network, which brings back online services as they are set to be discontinued. It also revives the Miiverse service, via juxtaposition. The official guide can be found [here](https://pretendo.network/docs/install/wiiu).
+
+### Booting Tiramisu (optional)
+
+?> Tiramisu is now archived, and was succeeded by Aroma and considered outdated. No more Homebrew will be developed for it, and services like Pretendo have ended support for it.
+
+However, if you find the need to boot into Tiramisu, for example, to use a legacy Homebrew app, do the following:
 
 1. Download the latest files from [Tiramisu for your café](https://tiramisu.foryour.cafe).
 1. Copy the `wiiu` folder to the root of your SD Card.
@@ -44,6 +50,7 @@ If you find the need to boot into Tiramisu, for example, to use a legacy Homebre
 1. Take the SD Card out of your computer and plug it into your Wii U console.
 1. Start the EnvironmentLoader.
     - If you're autobooting into it, this can be done by powering on your console and holding X.
+    - You do not need to reinstall the PayloadLoader if you already did so with Aroma.
 1. Highlight the entry called `tiramisu` using the D-Pad.
 1. Launch Tiramisu by pressing A.
 1. Launch the Wii U Menu by pressing A.

translations/ar_SA/docs/user-guide/aroma/getting-started.md

@@ -15,7 +15,7 @@ For a detailed overview check out [this blogpost](https://maschell.github.io/hom
 #### Modules
 
 Aroma supports modules, which unlike setup modules, always run in the background.  
-This allows further extending the functionality of the console.
+This allows for further extending the functionality of the console.
 
 #### Plugins
 

translations/ar_SA/docs/user-guide/aroma/nand-backup.md

@@ -18,6 +18,6 @@ In case anything should go wrong in the later process and your Wii U ends up bri
    - Dump OTP: **yes**
    - Dump SEEPROM: **yes**
 3. Press the A button to start the dumping process.
-4. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC.
+4. When the process is completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC.
 5. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer.
 6. Delete the files from your SD Card to free up space.

translations/ar_SA/docs/user-guide/aroma/sd-preparation.md

@@ -7,15 +7,12 @@ We will now place the required Aroma files on the SD Card.
 ?> **Notice** Your SD Card will need to be formatted as FAT32. If your SD Card is not formatted to FAT32, use [GUIFormat](http://ridgecrop.co.uk/index.htm?guiformat.htm) with 32k (32768) allocation unit size to format it.  
 **Do not** label the SD Card as `wiiu` or it will cause issues with homebrew.
 
-### What You Need
-
-- The latest release of the [PayloadLoader Installer](https://github.com/wiiu-env/PayloadLoaderInstaller/releases).
-
 ### Instructions
 
 1. On the [Aroma](https://aroma.foryour.cafe) site, scroll down to the **Download** section.
 1. Read through the steps and click on the checkboxes.
 1. Click on `Download Payloads` and `Download Base Aroma`.
+1. Download the [PayloadLoader Installer](https://github.com/wiiu-env/PayloadLoaderInstaller/releases/download/v0.1/PayloadLoaderInstaller_20220905-105329.zip)
 1. Insert your Wii U's SD Card into your PC.
 1. **Extract** and copy the `wiiu` folder of the three newly downloaded *`.zip`* files to the root of your SD Card.
     - The three `wiiu` folders should be merged if not done automatically.

translations/ar_SA/docs/user-guide/vwii/patching-ios80.md

@@ -12,6 +12,6 @@ Patching IOS 80 allows you to have custom channels on the SD card, including wad
 4. Wait until it says <code>IOS80 <wbr>Installation <wbr>is <wbr>complete!</code>.
 5. Press any button to exit.
 
-!> Installing custom System Menu is a definite brick risk and you should always have an effective backup before installing one but when done right, won't brick the vWii.
+!> Installing a custom System Menu is a definite brick risk and you should always have an effective backup before installing one but when done right, won't brick the vWii.
 
 !> Installing any IOS (including TED IOSes) or wads made for the original Wii on your vWii will brick it. WiiWare wads are fine, but some need to be converted to work.

translations/ar_SA/docs/user-guide/vwii/sd-preparation.md

@@ -18,7 +18,7 @@ Your SD Card will need to be formatted as FAT32. If your SD Card is not formatte
 ### What You Need
 
 - The latest files from [Aroma for your café](https://aroma.foryour.cafe).
-  - Click on `Download Payloads`and `Download Base Aroma`.
+  - Click on `Download Payloads` and `Download Base Aroma`.
   - Read through the steps and click on the checkboxes.
   - If you have already installed Aroma, you do not need to redownload it.
 - The latest release of the [Compat Title Installer](https://hbas-frontend.b-cdn.net/wiiu/CompatTitleInstaller).

translations/ca_ES/docs/user-guide/archive/tiramisu/autoboot.md

@@ -11,7 +11,7 @@ Currently, every time you want to launch Tiramisu you will have to launch the He
 1. Press A to select `Check`.
 1. Select `Boot options`.
 1. You will be asked if you want to switch the boot title. Press A to select `Switch to PayloadLoader`.
-1. When the process finished, press A to shutdown the console.
+1. When the process is finished, press A to shutdown the console.
 1. The PayloadLoader will now be launched automatically on every boot.
     - To change the default boot title hold Start (+) on the Gamepad while booting the console. You cannot change the boot title until you set a default environment first.
     - Navigate the list using the D-Pad to hover on the title you want to autoboot in, then press the Y button to set this to your autoboot title.

translations/ca_ES/docs/user-guide/archive/tiramisu/finalizing-setup.md

@@ -14,7 +14,7 @@ We are going to make the Tiramisu environment start automatically when your cons
     - You might get a red warning screen telling you that updates aren't blocked properly. Press A to continue anyway. We're going to block updates in the "Blocking Updates" section below.
     - To open the Environment Loader in the future, you have to hold X while your Wii U is booting up.
 1. On the Tiramisu Boot Selector, the `Wii U Menu` should already be selected, press Y to set this to your default autobooting option, then press A to launch into the Wii U Menu.
-    - To open the Tiramisu Boot Selector in the future, you have hold START (+) while your Wii U is booting up.
+    - To open the Tiramisu Boot Selector in the future, you have to hold START (+) while your Wii U is booting up.
 
 ?> Once you're booted into the Tiramisu environment, you can open the Mii Maker at any time to get into the Homebrew Launcher. <br>Homebrew Launcher will be empty for first-time modders. Follow the rest of the guide to install apps into the Homebrew Launcher. <br>To get back into the Mii Maker, simply press the HOME button while in the Homebrew Launcher.
 

translations/ca_ES/docs/user-guide/archive/tiramisu/nand-backup.md

@@ -18,7 +18,7 @@ In case anything should go wrong in the later process and your Wii U ends up bri
     - Dump OTP: **yes**
     - Dump SEEPROM: **yes**
 1. Press the A button to start the dumping process.
-1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC.
+1. When the process is completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC.
 1. The files will appear on the root of the SD card.
 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` (and if you chose to go with a full backup, `every mlc.bin.part`) file to your computer.
 1. Delete the files from your SD Card to free up space.

translations/ca_ES/docs/user-guide/aroma/autoboot.md

@@ -4,11 +4,11 @@
 
 Currently, every time you want to launch Aroma you will have to launch the Health and Safety information app. If you wish to automatically launch into Aroma on every boot, you can autoboot the Health and Safety Information app.
 
-If you don't want to autoobot Aroma, you can skip this step and follow the Setting Up PayloadLoader section below.
+If you don't want to autoboot Aroma, you can skip this step and follow the Setting Up PayloadLoader section below.
 
 ### Instructions
 
-1. Start the console to boot into the Wii U Menu, launch the Health and Safety Information app.
+1. Start the console to boot into the Wii U Menu, and then launch the Health and Safety Information app.
 2. Press A to launch the `aroma` environment.
 3. Press A to launch the Wii U Menu.
 4. Once you are at the Wii U Menu, launch the PayloadLoader Installer.
@@ -33,6 +33,6 @@ Now, we are going to make the Aroma environment start automatically when your co
 3. On the Aroma Boot Selector, the `Wii U Menu` should already be selected, press Y to set this to your default autobooting option, then press A to launch into the Wii U Menu.
 
 4. Aroma will now be launched each time you boot the console (or load Health and Safety) and then straight into the Wii U Menu.
-   - To open the Aroma Boot Selector in the future, you have hold START (+) while the console is booting or loading the Health and Safety Information app.
+   - To open the Aroma Boot Selector in the future, you have to hold START (+) while the console is booting or loading the Health and Safety Information app.
    - Navigate the list using the D-Pad to hover on the title you want to autoboot in, then press the Y button to set this to your autoboot title.
    - Press A to launch the selected title.

translations/ca_ES/docs/user-guide/aroma/finalizing-setup.md

@@ -34,9 +34,15 @@ While Aroma's PayloadLoader already has built-in update blocking functionality,
 | [Bloopair](https://github.com/GaryOderNichts/Bloopair/) ([Download](https://github.com/GaryOderNichts/Bloopair/releases))          | Allows wirelessly connecting most popular Bluetooth capable controllers. | 1. Extract the contents of the newly downloaded `Bloopair_vX.X.X.zip` file. <br> 2. Copy the `30_bloopair.rpx` to the `wiiu/environments/aroma/modules/setup/` folder on the root of your SD Card. <br> 3. Copy the `wiiu` folder to the root of your SD Card. |
 | [Screenshot Plugin](https://github.com/wiiu-env/ScreenshotWUPS/) ([Download](https://github.com/wiiu-env/ScreenshotWUPS/releases)) | Allows taking screenshots directly to the SD Card.                       | 1. Extract the downloaded `screenshot_plugin_vX_X.zip` file. <br> 2. Copy the `screenshot.wps` to the `wiiu/environments/aroma/plugins` folder on the root of your SD Card.                                                                                          |
 
-### Booting Tiramisu
+### Pretendo Network
 
-If you find the need to boot into Tiramisu, for example, to use a legacy Homebrew app, do the following:
+Pretendo is a replacement service for the Nintendo Network, which brings back online services as they are set to be discontinued. It also revives the Miiverse service, via juxtaposition. The official guide can be found [here](https://pretendo.network/docs/install/wiiu).
+
+### Booting Tiramisu (optional)
+
+?> Tiramisu is now archived, and was succeeded by Aroma and considered outdated. No more Homebrew will be developed for it, and services like Pretendo have ended support for it.
+
+However, if you find the need to boot into Tiramisu, for example, to use a legacy Homebrew app, do the following:
 
 1. Download the latest files from [Tiramisu for your café](https://tiramisu.foryour.cafe).
 1. Copy the `wiiu` folder to the root of your SD Card.
@@ -44,6 +50,7 @@ If you find the need to boot into Tiramisu, for example, to use a legacy Homebre
 1. Take the SD Card out of your computer and plug it into your Wii U console.
 1. Start the EnvironmentLoader.
     - If you're autobooting into it, this can be done by powering on your console and holding X.
+    - You do not need to reinstall the PayloadLoader if you already did so with Aroma.
 1. Highlight the entry called `tiramisu` using the D-Pad.
 1. Launch Tiramisu by pressing A.
 1. Launch the Wii U Menu by pressing A.

translations/ca_ES/docs/user-guide/aroma/getting-started.md

@@ -15,7 +15,7 @@ For a detailed overview check out [this blogpost](https://maschell.github.io/hom
 #### Modules
 
 Aroma supports modules, which unlike setup modules, always run in the background.  
-This allows further extending the functionality of the console.
+This allows for further extending the functionality of the console.
 
 #### Plugins
 

translations/ca_ES/docs/user-guide/aroma/nand-backup.md

@@ -18,6 +18,6 @@ In case anything should go wrong in the later process and your Wii U ends up bri
    - Dump OTP: **yes**
    - Dump SEEPROM: **yes**
 3. Press the A button to start the dumping process.
-4. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC.
+4. When the process is completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC.
 5. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer.
 6. Delete the files from your SD Card to free up space.

translations/ca_ES/docs/user-guide/aroma/sd-preparation.md

@@ -7,15 +7,12 @@ We will now place the required Aroma files on the SD Card.
 ?> **Notice** Your SD Card will need to be formatted as FAT32. If your SD Card is not formatted to FAT32, use [GUIFormat](http://ridgecrop.co.uk/index.htm?guiformat.htm) with 32k (32768) allocation unit size to format it.  
 **Do not** label the SD Card as `wiiu` or it will cause issues with homebrew.
 
-### What You Need
-
-- The latest release of the [PayloadLoader Installer](https://github.com/wiiu-env/PayloadLoaderInstaller/releases).
-
 ### Instructions
 
 1. On the [Aroma](https://aroma.foryour.cafe) site, scroll down to the **Download** section.
 1. Read through the steps and click on the checkboxes.
 1. Click on `Download Payloads` and `Download Base Aroma`.
+1. Download the [PayloadLoader Installer](https://github.com/wiiu-env/PayloadLoaderInstaller/releases/download/v0.1/PayloadLoaderInstaller_20220905-105329.zip)
 1. Insert your Wii U's SD Card into your PC.
 1. **Extract** and copy the `wiiu` folder of the three newly downloaded *`.zip`* files to the root of your SD Card.
     - The three `wiiu` folders should be merged if not done automatically.

translations/ca_ES/docs/user-guide/vwii/patching-ios80.md

@@ -12,6 +12,6 @@ Patching IOS 80 allows you to have custom channels on the SD card, including wad
 4. Wait until it says <code>IOS80 <wbr>Installation <wbr>is <wbr>complete!</code>.
 5. Press any button to exit.
 
-!> Installing custom System Menu is a definite brick risk and you should always have an effective backup before installing one but when done right, won't brick the vWii.
+!> Installing a custom System Menu is a definite brick risk and you should always have an effective backup before installing one but when done right, won't brick the vWii.
 
 !> Installing any IOS (including TED IOSes) or wads made for the original Wii on your vWii will brick it. WiiWare wads are fine, but some need to be converted to work.

translations/ca_ES/docs/user-guide/vwii/sd-preparation.md

@@ -18,7 +18,7 @@ Your SD Card will need to be formatted as FAT32. If your SD Card is not formatte
 ### What You Need
 
 - The latest files from [Aroma for your café](https://aroma.foryour.cafe).
-  - Click on `Download Payloads`and `Download Base Aroma`.
+  - Click on `Download Payloads` and `Download Base Aroma`.
   - Read through the steps and click on the checkboxes.
   - If you have already installed Aroma, you do not need to redownload it.
 - The latest release of the [Compat Title Installer](https://hbas-frontend.b-cdn.net/wiiu/CompatTitleInstaller).

translations/cs_CZ/docs/user-guide/archive/tiramisu/autoboot.md

@@ -11,7 +11,7 @@ Currently, every time you want to launch Tiramisu you will have to launch the He
 1. Press A to select `Check`.
 1. Select `Boot options`.
 1. You will be asked if you want to switch the boot title. Press A to select `Switch to PayloadLoader`.
-1. When the process finished, press A to shutdown the console.
+1. When the process is finished, press A to shutdown the console.
 1. The PayloadLoader will now be launched automatically on every boot.
     - To change the default boot title hold Start (+) on the Gamepad while booting the console. You cannot change the boot title until you set a default environment first.
     - Navigate the list using the D-Pad to hover on the title you want to autoboot in, then press the Y button to set this to your autoboot title.

translations/cs_CZ/docs/user-guide/archive/tiramisu/finalizing-setup.md

@@ -14,7 +14,7 @@ We are going to make the Tiramisu environment start automatically when your cons
     - You might get a red warning screen telling you that updates aren't blocked properly. Press A to continue anyway. We're going to block updates in the "Blocking Updates" section below.
     - To open the Environment Loader in the future, you have to hold X while your Wii U is booting up.
 1. On the Tiramisu Boot Selector, the `Wii U Menu` should already be selected, press Y to set this to your default autobooting option, then press A to launch into the Wii U Menu.
-    - To open the Tiramisu Boot Selector in the future, you have hold START (+) while your Wii U is booting up.
+    - To open the Tiramisu Boot Selector in the future, you have to hold START (+) while your Wii U is booting up.
 
 ?> Once you're booted into the Tiramisu environment, you can open the Mii Maker at any time to get into the Homebrew Launcher. <br>Homebrew Launcher will be empty for first-time modders. Follow the rest of the guide to install apps into the Homebrew Launcher. <br>To get back into the Mii Maker, simply press the HOME button while in the Homebrew Launcher.
 

translations/cs_CZ/docs/user-guide/archive/tiramisu/nand-backup.md

@@ -18,7 +18,7 @@ In case anything should go wrong in the later process and your Wii U ends up bri
     - Dump OTP: **yes**
     - Dump SEEPROM: **yes**
 1. Press the A button to start the dumping process.
-1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC.
+1. When the process is completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC.
 1. The files will appear on the root of the SD card.
 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` (and if you chose to go with a full backup, `every mlc.bin.part`) file to your computer.
 1. Delete the files from your SD Card to free up space.

translations/cs_CZ/docs/user-guide/aroma/autoboot.md

@@ -4,11 +4,11 @@
 
 Currently, every time you want to launch Aroma you will have to launch the Health and Safety information app. If you wish to automatically launch into Aroma on every boot, you can autoboot the Health and Safety Information app.
 
-If you don't want to autoobot Aroma, you can skip this step and follow the Setting Up PayloadLoader section below.
+If you don't want to autoboot Aroma, you can skip this step and follow the Setting Up PayloadLoader section below.
 
 ### Instructions
 
-1. Start the console to boot into the Wii U Menu, launch the Health and Safety Information app.
+1. Start the console to boot into the Wii U Menu, and then launch the Health and Safety Information app.
 2. Press A to launch the `aroma` environment.
 3. Press A to launch the Wii U Menu.
 4. Once you are at the Wii U Menu, launch the PayloadLoader Installer.
@@ -33,6 +33,6 @@ Now, we are going to make the Aroma environment start automatically when your co
 3. On the Aroma Boot Selector, the `Wii U Menu` should already be selected, press Y to set this to your default autobooting option, then press A to launch into the Wii U Menu.
 
 4. Aroma will now be launched each time you boot the console (or load Health and Safety) and then straight into the Wii U Menu.
-   - To open the Aroma Boot Selector in the future, you have hold START (+) while the console is booting or loading the Health and Safety Information app.
+   - To open the Aroma Boot Selector in the future, you have to hold START (+) while the console is booting or loading the Health and Safety Information app.
    - Navigate the list using the D-Pad to hover on the title you want to autoboot in, then press the Y button to set this to your autoboot title.
    - Press A to launch the selected title.

translations/cs_CZ/docs/user-guide/aroma/finalizing-setup.md

@@ -34,9 +34,15 @@ While Aroma's PayloadLoader already has built-in update blocking functionality,
 | [Bloopair](https://github.com/GaryOderNichts/Bloopair/) ([Download](https://github.com/GaryOderNichts/Bloopair/releases))          | Allows wirelessly connecting most popular Bluetooth capable controllers. | 1. Extract the contents of the newly downloaded `Bloopair_vX.X.X.zip` file. <br> 2. Copy the `30_bloopair.rpx` to the `wiiu/environments/aroma/modules/setup/` folder on the root of your SD Card. <br> 3. Copy the `wiiu` folder to the root of your SD Card. |
 | [Screenshot Plugin](https://github.com/wiiu-env/ScreenshotWUPS/) ([Download](https://github.com/wiiu-env/ScreenshotWUPS/releases)) | Allows taking screenshots directly to the SD Card.                       | 1. Extract the downloaded `screenshot_plugin_vX_X.zip` file. <br> 2. Copy the `screenshot.wps` to the `wiiu/environments/aroma/plugins` folder on the root of your SD Card.                                                                                          |
 
-### Booting Tiramisu
+### Pretendo Network
 
-If you find the need to boot into Tiramisu, for example, to use a legacy Homebrew app, do the following:
+Pretendo is a replacement service for the Nintendo Network, which brings back online services as they are set to be discontinued. It also revives the Miiverse service, via juxtaposition. The official guide can be found [here](https://pretendo.network/docs/install/wiiu).
+
+### Booting Tiramisu (optional)
+
+?> Tiramisu is now archived, and was succeeded by Aroma and considered outdated. No more Homebrew will be developed for it, and services like Pretendo have ended support for it.
+
+However, if you find the need to boot into Tiramisu, for example, to use a legacy Homebrew app, do the following:
 
 1. Download the latest files from [Tiramisu for your café](https://tiramisu.foryour.cafe).
 1. Copy the `wiiu` folder to the root of your SD Card.
@@ -44,6 +50,7 @@ If you find the need to boot into Tiramisu, for example, to use a legacy Homebre
 1. Take the SD Card out of your computer and plug it into your Wii U console.
 1. Start the EnvironmentLoader.
     - If you're autobooting into it, this can be done by powering on your console and holding X.
+    - You do not need to reinstall the PayloadLoader if you already did so with Aroma.
 1. Highlight the entry called `tiramisu` using the D-Pad.
 1. Launch Tiramisu by pressing A.
 1. Launch the Wii U Menu by pressing A.

translations/cs_CZ/docs/user-guide/aroma/getting-started.md

@@ -15,7 +15,7 @@ For a detailed overview check out [this blogpost](https://maschell.github.io/hom
 #### Modules
 
 Aroma supports modules, which unlike setup modules, always run in the background.  
-This allows further extending the functionality of the console.
+This allows for further extending the functionality of the console.
 
 #### Plugins
 

translations/cs_CZ/docs/user-guide/aroma/nand-backup.md

@@ -18,6 +18,6 @@ In case anything should go wrong in the later process and your Wii U ends up bri
    - Dump OTP: **yes**
    - Dump SEEPROM: **yes**
 3. Press the A button to start the dumping process.
-4. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC.
+4. When the process is completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC.
 5. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer.
 6. Delete the files from your SD Card to free up space.

translations/cs_CZ/docs/user-guide/aroma/sd-preparation.md

@@ -7,15 +7,12 @@ We will now place the required Aroma files on the SD Card.
 ?> **Notice** Your SD Card will need to be formatted as FAT32. If your SD Card is not formatted to FAT32, use [GUIFormat](http://ridgecrop.co.uk/index.htm?guiformat.htm) with 32k (32768) allocation unit size to format it.  
 **Do not** label the SD Card as `wiiu` or it will cause issues with homebrew.
 
-### What You Need
-
-- The latest release of the [PayloadLoader Installer](https://github.com/wiiu-env/PayloadLoaderInstaller/releases).
-
 ### Instructions
 
 1. On the [Aroma](https://aroma.foryour.cafe) site, scroll down to the **Download** section.
 1. Read through the steps and click on the checkboxes.
 1. Click on `Download Payloads` and `Download Base Aroma`.
+1. Download the [PayloadLoader Installer](https://github.com/wiiu-env/PayloadLoaderInstaller/releases/download/v0.1/PayloadLoaderInstaller_20220905-105329.zip)
 1. Insert your Wii U's SD Card into your PC.
 1. **Extract** and copy the `wiiu` folder of the three newly downloaded *`.zip`* files to the root of your SD Card.
     - The three `wiiu` folders should be merged if not done automatically.

translations/cs_CZ/docs/user-guide/vwii/patching-ios80.md

@@ -12,6 +12,6 @@ Patching IOS 80 allows you to have custom channels on the SD card, including wad
 4. Wait until it says <code>IOS80 <wbr>Installation <wbr>is <wbr>complete!</code>.
 5. Press any button to exit.
 
-!> Installing custom System Menu is a definite brick risk and you should always have an effective backup before installing one but when done right, won't brick the vWii.
+!> Installing a custom System Menu is a definite brick risk and you should always have an effective backup before installing one but when done right, won't brick the vWii.
 
 !> Installing any IOS (including TED IOSes) or wads made for the original Wii on your vWii will brick it. WiiWare wads are fine, but some need to be converted to work.

translations/cs_CZ/docs/user-guide/vwii/sd-preparation.md

@@ -18,7 +18,7 @@ Your SD Card will need to be formatted as FAT32. If your SD Card is not formatte
 ### What You Need
 
 - The latest files from [Aroma for your café](https://aroma.foryour.cafe).
-  - Click on `Download Payloads`and `Download Base Aroma`.
+  - Click on `Download Payloads` and `Download Base Aroma`.
   - Read through the steps and click on the checkboxes.
   - If you have already installed Aroma, you do not need to redownload it.
 - The latest release of the [Compat Title Installer](https://hbas-frontend.b-cdn.net/wiiu/CompatTitleInstaller).

translations/da_DK/docs/user-guide/archive/tiramisu/autoboot.md

@@ -11,7 +11,7 @@ Currently, every time you want to launch Tiramisu you will have to launch the He
 1. Press A to select `Check`.
 1. Select `Boot options`.
 1. You will be asked if you want to switch the boot title. Press A to select `Switch to PayloadLoader`.
-1. When the process finished, press A to shutdown the console.
+1. When the process is finished, press A to shutdown the console.
 1. The PayloadLoader will now be launched automatically on every boot.
     - To change the default boot title hold Start (+) on the Gamepad while booting the console. You cannot change the boot title until you set a default environment first.
     - Navigate the list using the D-Pad to hover on the title you want to autoboot in, then press the Y button to set this to your autoboot title.

translations/da_DK/docs/user-guide/archive/tiramisu/finalizing-setup.md

@@ -14,7 +14,7 @@ We are going to make the Tiramisu environment start automatically when your cons
     - You might get a red warning screen telling you that updates aren't blocked properly. Press A to continue anyway. We're going to block updates in the "Blocking Updates" section below.
     - To open the Environment Loader in the future, you have to hold X while your Wii U is booting up.
 1. On the Tiramisu Boot Selector, the `Wii U Menu` should already be selected, press Y to set this to your default autobooting option, then press A to launch into the Wii U Menu.
-    - To open the Tiramisu Boot Selector in the future, you have hold START (+) while your Wii U is booting up.
+    - To open the Tiramisu Boot Selector in the future, you have to hold START (+) while your Wii U is booting up.
 
 ?> Once you're booted into the Tiramisu environment, you can open the Mii Maker at any time to get into the Homebrew Launcher. <br>Homebrew Launcher will be empty for first-time modders. Follow the rest of the guide to install apps into the Homebrew Launcher. <br>To get back into the Mii Maker, simply press the HOME button while in the Homebrew Launcher.
 

translations/da_DK/docs/user-guide/archive/tiramisu/nand-backup.md

@@ -18,7 +18,7 @@ In case anything should go wrong in the later process and your Wii U ends up bri
     - Dump OTP: **yes**
     - Dump SEEPROM: **yes**
 1. Press the A button to start the dumping process.
-1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC.
+1. When the process is completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC.
 1. The files will appear on the root of the SD card.
 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` (and if you chose to go with a full backup, `every mlc.bin.part`) file to your computer.
 1. Delete the files from your SD Card to free up space.

translations/da_DK/docs/user-guide/aroma/autoboot.md

@@ -4,11 +4,11 @@
 
 Currently, every time you want to launch Aroma you will have to launch the Health and Safety information app. If you wish to automatically launch into Aroma on every boot, you can autoboot the Health and Safety Information app.
 
-If you don't want to autoobot Aroma, you can skip this step and follow the Setting Up PayloadLoader section below.
+If you don't want to autoboot Aroma, you can skip this step and follow the Setting Up PayloadLoader section below.
 
 ### Instructions
 
-1. Start the console to boot into the Wii U Menu, launch the Health and Safety Information app.
+1. Start the console to boot into the Wii U Menu, and then launch the Health and Safety Information app.
 2. Press A to launch the `aroma` environment.
 3. Press A to launch the Wii U Menu.
 4. Once you are at the Wii U Menu, launch the PayloadLoader Installer.
@@ -33,6 +33,6 @@ Now, we are going to make the Aroma environment start automatically when your co
 3. On the Aroma Boot Selector, the `Wii U Menu` should already be selected, press Y to set this to your default autobooting option, then press A to launch into the Wii U Menu.
 
 4. Aroma will now be launched each time you boot the console (or load Health and Safety) and then straight into the Wii U Menu.
-   - To open the Aroma Boot Selector in the future, you have hold START (+) while the console is booting or loading the Health and Safety Information app.
+   - To open the Aroma Boot Selector in the future, you have to hold START (+) while the console is booting or loading the Health and Safety Information app.
    - Navigate the list using the D-Pad to hover on the title you want to autoboot in, then press the Y button to set this to your autoboot title.
    - Press A to launch the selected title.

translations/da_DK/docs/user-guide/aroma/finalizing-setup.md

@@ -34,9 +34,15 @@ While Aroma's PayloadLoader already has built-in update blocking functionality,
 | [Bloopair](https://github.com/GaryOderNichts/Bloopair/) ([Download](https://github.com/GaryOderNichts/Bloopair/releases))          | Allows wirelessly connecting most popular Bluetooth capable controllers. | 1. Extract the contents of the newly downloaded `Bloopair_vX.X.X.zip` file. <br> 2. Copy the `30_bloopair.rpx` to the `wiiu/environments/aroma/modules/setup/` folder on the root of your SD Card. <br> 3. Copy the `wiiu` folder to the root of your SD Card. |
 | [Screenshot Plugin](https://github.com/wiiu-env/ScreenshotWUPS/) ([Download](https://github.com/wiiu-env/ScreenshotWUPS/releases)) | Allows taking screenshots directly to the SD Card.                       | 1. Extract the downloaded `screenshot_plugin_vX_X.zip` file. <br> 2. Copy the `screenshot.wps` to the `wiiu/environments/aroma/plugins` folder on the root of your SD Card.                                                                                          |
 
-### Booting Tiramisu
+### Pretendo Network
 
-If you find the need to boot into Tiramisu, for example, to use a legacy Homebrew app, do the following:
+Pretendo is a replacement service for the Nintendo Network, which brings back online services as they are set to be discontinued. It also revives the Miiverse service, via juxtaposition. The official guide can be found [here](https://pretendo.network/docs/install/wiiu).
+
+### Booting Tiramisu (optional)
+
+?> Tiramisu is now archived, and was succeeded by Aroma and considered outdated. No more Homebrew will be developed for it, and services like Pretendo have ended support for it.
+
+However, if you find the need to boot into Tiramisu, for example, to use a legacy Homebrew app, do the following:
 
 1. Download the latest files from [Tiramisu for your café](https://tiramisu.foryour.cafe).
 1. Copy the `wiiu` folder to the root of your SD Card.
@@ -44,6 +50,7 @@ If you find the need to boot into Tiramisu, for example, to use a legacy Homebre
 1. Take the SD Card out of your computer and plug it into your Wii U console.
 1. Start the EnvironmentLoader.
     - If you're autobooting into it, this can be done by powering on your console and holding X.
+    - You do not need to reinstall the PayloadLoader if you already did so with Aroma.
 1. Highlight the entry called `tiramisu` using the D-Pad.
 1. Launch Tiramisu by pressing A.
 1. Launch the Wii U Menu by pressing A.

translations/da_DK/docs/user-guide/aroma/getting-started.md

@@ -15,7 +15,7 @@ For a detailed overview check out [this blogpost](https://maschell.github.io/hom
 #### Modules
 
 Aroma supports modules, which unlike setup modules, always run in the background.  
-This allows further extending the functionality of the console.
+This allows for further extending the functionality of the console.
 
 #### Plugins
 

translations/da_DK/docs/user-guide/aroma/nand-backup.md

@@ -18,6 +18,6 @@ In case anything should go wrong in the later process and your Wii U ends up bri
    - Dump OTP: **yes**
    - Dump SEEPROM: **yes**
 3. Press the A button to start the dumping process.
-4. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC.
+4. When the process is completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC.
 5. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer.
 6. Delete the files from your SD Card to free up space.

translations/da_DK/docs/user-guide/aroma/sd-preparation.md

@@ -7,15 +7,12 @@ We will now place the required Aroma files on the SD Card.
 ?> **Notice** Your SD Card will need to be formatted as FAT32. If your SD Card is not formatted to FAT32, use [GUIFormat](http://ridgecrop.co.uk/index.htm?guiformat.htm) with 32k (32768) allocation unit size to format it.  
 **Do not** label the SD Card as `wiiu` or it will cause issues with homebrew.
 
-### What You Need
-
-- The latest release of the [PayloadLoader Installer](https://github.com/wiiu-env/PayloadLoaderInstaller/releases).
-
 ### Instructions
 
 1. On the [Aroma](https://aroma.foryour.cafe) site, scroll down to the **Download** section.
 1. Read through the steps and click on the checkboxes.
 1. Click on `Download Payloads` and `Download Base Aroma`.
+1. Download the [PayloadLoader Installer](https://github.com/wiiu-env/PayloadLoaderInstaller/releases/download/v0.1/PayloadLoaderInstaller_20220905-105329.zip)
 1. Insert your Wii U's SD Card into your PC.
 1. **Extract** and copy the `wiiu` folder of the three newly downloaded *`.zip`* files to the root of your SD Card.
     - The three `wiiu` folders should be merged if not done automatically.

translations/da_DK/docs/user-guide/vwii/patching-ios80.md

@@ -12,6 +12,6 @@ Patching IOS 80 allows you to have custom channels on the SD card, including wad
 4. Wait until it says <code>IOS80 <wbr>Installation <wbr>is <wbr>complete!</code>.
 5. Press any button to exit.
 
-!> Installing custom System Menu is a definite brick risk and you should always have an effective backup before installing one but when done right, won't brick the vWii.
+!> Installing a custom System Menu is a definite brick risk and you should always have an effective backup before installing one but when done right, won't brick the vWii.
 
 !> Installing any IOS (including TED IOSes) or wads made for the original Wii on your vWii will brick it. WiiWare wads are fine, but some need to be converted to work.

translations/da_DK/docs/user-guide/vwii/sd-preparation.md

@@ -18,7 +18,7 @@ Your SD Card will need to be formatted as FAT32. If your SD Card is not formatte
 ### What You Need
 
 - The latest files from [Aroma for your café](https://aroma.foryour.cafe).
-  - Click on `Download Payloads`and `Download Base Aroma`.
+  - Click on `Download Payloads` and `Download Base Aroma`.
   - Read through the steps and click on the checkboxes.
   - If you have already installed Aroma, you do not need to redownload it.
 - The latest release of the [Compat Title Installer](https://hbas-frontend.b-cdn.net/wiiu/CompatTitleInstaller).

translations/de_DE/docs/user-guide/archive/tiramisu/autoboot.md

@@ -11,7 +11,7 @@ Currently, every time you want to launch Tiramisu you will have to launch the He
 1. Press A to select `Check`.
 1. Select `Boot options`.
 1. You will be asked if you want to switch the boot title. Press A to select `Switch to PayloadLoader`.
-1. When the process finished, press A to shutdown the console.
+1. When the process is finished, press A to shutdown the console.
 1. The PayloadLoader will now be launched automatically on every boot.
     - To change the default boot title hold Start (+) on the Gamepad while booting the console. You cannot change the boot title until you set a default environment first.
     - Navigate the list using the D-Pad to hover on the title you want to autoboot in, then press the Y button to set this to your autoboot title.

translations/de_DE/docs/user-guide/archive/tiramisu/finalizing-setup.md

@@ -14,7 +14,7 @@ We are going to make the Tiramisu environment start automatically when your cons
     - You might get a red warning screen telling you that updates aren't blocked properly. Press A to continue anyway. We're going to block updates in the "Blocking Updates" section below.
     - To open the Environment Loader in the future, you have to hold X while your Wii U is booting up.
 1. On the Tiramisu Boot Selector, the `Wii U Menu` should already be selected, press Y to set this to your default autobooting option, then press A to launch into the Wii U Menu.
-    - To open the Tiramisu Boot Selector in the future, you have hold START (+) while your Wii U is booting up.
+    - To open the Tiramisu Boot Selector in the future, you have to hold START (+) while your Wii U is booting up.
 
 ?> Once you're booted into the Tiramisu environment, you can open the Mii Maker at any time to get into the Homebrew Launcher. <br>Homebrew Launcher will be empty for first-time modders. Follow the rest of the guide to install apps into the Homebrew Launcher. <br>To get back into the Mii Maker, simply press the HOME button while in the Homebrew Launcher.
 

translations/de_DE/docs/user-guide/archive/tiramisu/nand-backup.md

@@ -18,7 +18,7 @@ In case anything should go wrong in the later process and your Wii U ends up bri
     - Dump OTP: **yes**
     - Dump SEEPROM: **yes**
 1. Press the A button to start the dumping process.
-1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC.
+1. When the process is completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC.
 1. The files will appear on the root of the SD card.
 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` (and if you chose to go with a full backup, `every mlc.bin.part`) file to your computer.
 1. Delete the files from your SD Card to free up space.

translations/de_DE/docs/user-guide/aroma/autoboot.md

@@ -4,11 +4,11 @@
 
 Currently, every time you want to launch Aroma you will have to launch the Health and Safety information app. If you wish to automatically launch into Aroma on every boot, you can autoboot the Health and Safety Information app.
 
-If you don't want to autoobot Aroma, you can skip this step and follow the Setting Up PayloadLoader section below.
+If you don't want to autoboot Aroma, you can skip this step and follow the Setting Up PayloadLoader section below.
 
 ### Instructions
 
-1. Start the console to boot into the Wii U Menu, launch the Health and Safety Information app.
+1. Start the console to boot into the Wii U Menu, and then launch the Health and Safety Information app.
 2. Press A to launch the `aroma` environment.
 3. Press A to launch the Wii U Menu.
 4. Once you are at the Wii U Menu, launch the PayloadLoader Installer.
@@ -33,6 +33,6 @@ Now, we are going to make the Aroma environment start automatically when your co
 3. On the Aroma Boot Selector, the `Wii U Menu` should already be selected, press Y to set this to your default autobooting option, then press A to launch into the Wii U Menu.
 
 4. Aroma will now be launched each time you boot the console (or load Health and Safety) and then straight into the Wii U Menu.
-   - To open the Aroma Boot Selector in the future, you have hold START (+) while the console is booting or loading the Health and Safety Information app.
+   - To open the Aroma Boot Selector in the future, you have to hold START (+) while the console is booting or loading the Health and Safety Information app.
    - Navigate the list using the D-Pad to hover on the title you want to autoboot in, then press the Y button to set this to your autoboot title.
    - Press A to launch the selected title.

translations/de_DE/docs/user-guide/aroma/finalizing-setup.md

@@ -34,9 +34,15 @@ While Aroma's PayloadLoader already has built-in update blocking functionality,
 | [Bloopair](https://github.com/GaryOderNichts/Bloopair/) ([Download](https://github.com/GaryOderNichts/Bloopair/releases))          | Allows wirelessly connecting most popular Bluetooth capable controllers. | 1. Extract the contents of the newly downloaded `Bloopair_vX.X.X.zip` file. <br> 2. Copy the `30_bloopair.rpx` to the `wiiu/environments/aroma/modules/setup/` folder on the root of your SD Card. <br> 3. Copy the `wiiu` folder to the root of your SD Card. |
 | [Screenshot Plugin](https://github.com/wiiu-env/ScreenshotWUPS/) ([Download](https://github.com/wiiu-env/ScreenshotWUPS/releases)) | Allows taking screenshots directly to the SD Card.                       | 1. Extract the downloaded `screenshot_plugin_vX_X.zip` file. <br> 2. Copy the `screenshot.wps` to the `wiiu/environments/aroma/plugins` folder on the root of your SD Card.                                                                                          |
 
-### Booting Tiramisu
+### Pretendo Network
 
-If you find the need to boot into Tiramisu, for example, to use a legacy Homebrew app, do the following:
+Pretendo is a replacement service for the Nintendo Network, which brings back online services as they are set to be discontinued. It also revives the Miiverse service, via juxtaposition. The official guide can be found [here](https://pretendo.network/docs/install/wiiu).
+
+### Booting Tiramisu (optional)
+
+?> Tiramisu is now archived, and was succeeded by Aroma and considered outdated. No more Homebrew will be developed for it, and services like Pretendo have ended support for it.
+
+However, if you find the need to boot into Tiramisu, for example, to use a legacy Homebrew app, do the following:
 
 1. Download the latest files from [Tiramisu for your café](https://tiramisu.foryour.cafe).
 1. Copy the `wiiu` folder to the root of your SD Card.
@@ -44,6 +50,7 @@ If you find the need to boot into Tiramisu, for example, to use a legacy Homebre
 1. Take the SD Card out of your computer and plug it into your Wii U console.
 1. Start the EnvironmentLoader.
     - If you're autobooting into it, this can be done by powering on your console and holding X.
+    - You do not need to reinstall the PayloadLoader if you already did so with Aroma.
 1. Highlight the entry called `tiramisu` using the D-Pad.
 1. Launch Tiramisu by pressing A.
 1. Launch the Wii U Menu by pressing A.

translations/de_DE/docs/user-guide/aroma/getting-started.md

@@ -15,7 +15,7 @@ For a detailed overview check out [this blogpost](https://maschell.github.io/hom
 #### Modules
 
 Aroma supports modules, which unlike setup modules, always run in the background.  
-This allows further extending the functionality of the console.
+This allows for further extending the functionality of the console.
 
 #### Plugins
 

translations/de_DE/docs/user-guide/aroma/nand-backup.md

@@ -18,6 +18,6 @@ In case anything should go wrong in the later process and your Wii U ends up bri
    - Dump OTP: **yes**
    - Dump SEEPROM: **yes**
 3. Press the A button to start the dumping process.
-4. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC.
+4. When the process is completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC.
 5. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer.
 6. Delete the files from your SD Card to free up space.

translations/de_DE/docs/user-guide/aroma/sd-preparation.md

@@ -7,15 +7,12 @@ We will now place the required Aroma files on the SD Card.
 ?> **Notice** Your SD Card will need to be formatted as FAT32. If your SD Card is not formatted to FAT32, use [GUIFormat](http://ridgecrop.co.uk/index.htm?guiformat.htm) with 32k (32768) allocation unit size to format it.  
 **Do not** label the SD Card as `wiiu` or it will cause issues with homebrew.
 
-### What You Need
-
-- The latest release of the [PayloadLoader Installer](https://github.com/wiiu-env/PayloadLoaderInstaller/releases).
-
 ### Instructions
 
 1. On the [Aroma](https://aroma.foryour.cafe) site, scroll down to the **Download** section.
 1. Read through the steps and click on the checkboxes.
 1. Click on `Download Payloads` and `Download Base Aroma`.
+1. Download the [PayloadLoader Installer](https://github.com/wiiu-env/PayloadLoaderInstaller/releases/download/v0.1/PayloadLoaderInstaller_20220905-105329.zip)
 1. Insert your Wii U's SD Card into your PC.
 1. **Extract** and copy the `wiiu` folder of the three newly downloaded *`.zip`* files to the root of your SD Card.
     - The three `wiiu` folders should be merged if not done automatically.

translations/de_DE/docs/user-guide/vwii/patching-ios80.md

@@ -12,6 +12,6 @@ Patching IOS 80 allows you to have custom channels on the SD card, including wad
 4. Wait until it says <code>IOS80 <wbr>Installation <wbr>is <wbr>complete!</code>.
 5. Press any button to exit.
 
-!> Installing custom System Menu is a definite brick risk and you should always have an effective backup before installing one but when done right, won't brick the vWii.
+!> Installing a custom System Menu is a definite brick risk and you should always have an effective backup before installing one but when done right, won't brick the vWii.
 
 !> Installing any IOS (including TED IOSes) or wads made for the original Wii on your vWii will brick it. WiiWare wads are fine, but some need to be converted to work.

translations/de_DE/docs/user-guide/vwii/sd-preparation.md

@@ -18,7 +18,7 @@ Your SD Card will need to be formatted as FAT32. If your SD Card is not formatte
 ### What You Need
 
 - The latest files from [Aroma for your café](https://aroma.foryour.cafe).
-  - Click on `Download Payloads`and `Download Base Aroma`.
+  - Click on `Download Payloads` and `Download Base Aroma`.
   - Read through the steps and click on the checkboxes.
   - If you have already installed Aroma, you do not need to redownload it.
 - The latest release of the [Compat Title Installer](https://hbas-frontend.b-cdn.net/wiiu/CompatTitleInstaller).

translations/el_GR/docs/user-guide/archive/tiramisu/autoboot.md

@@ -11,7 +11,7 @@ Currently, every time you want to launch Tiramisu you will have to launch the He
 1. Press A to select `Check`.
 1. Select `Boot options`.
 1. You will be asked if you want to switch the boot title. Press A to select `Switch to PayloadLoader`.
-1. When the process finished, press A to shutdown the console.
+1. When the process is finished, press A to shutdown the console.
 1. The PayloadLoader will now be launched automatically on every boot.
     - To change the default boot title hold Start (+) on the Gamepad while booting the console. You cannot change the boot title until you set a default environment first.
     - Navigate the list using the D-Pad to hover on the title you want to autoboot in, then press the Y button to set this to your autoboot title.

translations/el_GR/docs/user-guide/archive/tiramisu/finalizing-setup.md

@@ -14,7 +14,7 @@ We are going to make the Tiramisu environment start automatically when your cons
     - You might get a red warning screen telling you that updates aren't blocked properly. Press A to continue anyway. We're going to block updates in the "Blocking Updates" section below.
     - To open the Environment Loader in the future, you have to hold X while your Wii U is booting up.
 1. On the Tiramisu Boot Selector, the `Wii U Menu` should already be selected, press Y to set this to your default autobooting option, then press A to launch into the Wii U Menu.
-    - To open the Tiramisu Boot Selector in the future, you have hold START (+) while your Wii U is booting up.
+    - To open the Tiramisu Boot Selector in the future, you have to hold START (+) while your Wii U is booting up.
 
 ?> Once you're booted into the Tiramisu environment, you can open the Mii Maker at any time to get into the Homebrew Launcher. <br>Homebrew Launcher will be empty for first-time modders. Follow the rest of the guide to install apps into the Homebrew Launcher. <br>To get back into the Mii Maker, simply press the HOME button while in the Homebrew Launcher.
 

translations/el_GR/docs/user-guide/archive/tiramisu/nand-backup.md

@@ -18,7 +18,7 @@ In case anything should go wrong in the later process and your Wii U ends up bri
     - Dump OTP: **yes**
     - Dump SEEPROM: **yes**
 1. Press the A button to start the dumping process.
-1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC.
+1. When the process is completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC.
 1. The files will appear on the root of the SD card.
 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` (and if you chose to go with a full backup, `every mlc.bin.part`) file to your computer.
 1. Delete the files from your SD Card to free up space.

translations/el_GR/docs/user-guide/aroma/autoboot.md

@@ -4,11 +4,11 @@
 
 Currently, every time you want to launch Aroma you will have to launch the Health and Safety information app. If you wish to automatically launch into Aroma on every boot, you can autoboot the Health and Safety Information app.
 
-If you don't want to autoobot Aroma, you can skip this step and follow the Setting Up PayloadLoader section below.
+If you don't want to autoboot Aroma, you can skip this step and follow the Setting Up PayloadLoader section below.
 
 ### Instructions
 
-1. Start the console to boot into the Wii U Menu, launch the Health and Safety Information app.
+1. Start the console to boot into the Wii U Menu, and then launch the Health and Safety Information app.
 2. Press A to launch the `aroma` environment.
 3. Press A to launch the Wii U Menu.
 4. Once you are at the Wii U Menu, launch the PayloadLoader Installer.
@@ -33,6 +33,6 @@ Now, we are going to make the Aroma environment start automatically when your co
 3. On the Aroma Boot Selector, the `Wii U Menu` should already be selected, press Y to set this to your default autobooting option, then press A to launch into the Wii U Menu.
 
 4. Aroma will now be launched each time you boot the console (or load Health and Safety) and then straight into the Wii U Menu.
-   - To open the Aroma Boot Selector in the future, you have hold START (+) while the console is booting or loading the Health and Safety Information app.
+   - To open the Aroma Boot Selector in the future, you have to hold START (+) while the console is booting or loading the Health and Safety Information app.
    - Navigate the list using the D-Pad to hover on the title you want to autoboot in, then press the Y button to set this to your autoboot title.
    - Press A to launch the selected title.

translations/el_GR/docs/user-guide/aroma/finalizing-setup.md

@@ -34,9 +34,15 @@ While Aroma's PayloadLoader already has built-in update blocking functionality,
 | [Bloopair](https://github.com/GaryOderNichts/Bloopair/) ([Download](https://github.com/GaryOderNichts/Bloopair/releases))          | Allows wirelessly connecting most popular Bluetooth capable controllers. | 1. Extract the contents of the newly downloaded `Bloopair_vX.X.X.zip` file. <br> 2. Copy the `30_bloopair.rpx` to the `wiiu/environments/aroma/modules/setup/` folder on the root of your SD Card. <br> 3. Copy the `wiiu` folder to the root of your SD Card. |
 | [Screenshot Plugin](https://github.com/wiiu-env/ScreenshotWUPS/) ([Download](https://github.com/wiiu-env/ScreenshotWUPS/releases)) | Allows taking screenshots directly to the SD Card.                       | 1. Extract the downloaded `screenshot_plugin_vX_X.zip` file. <br> 2. Copy the `screenshot.wps` to the `wiiu/environments/aroma/plugins` folder on the root of your SD Card.                                                                                          |
 
-### Booting Tiramisu
+### Pretendo Network
 
-If you find the need to boot into Tiramisu, for example, to use a legacy Homebrew app, do the following:
+Pretendo is a replacement service for the Nintendo Network, which brings back online services as they are set to be discontinued. It also revives the Miiverse service, via juxtaposition. The official guide can be found [here](https://pretendo.network/docs/install/wiiu).
+
+### Booting Tiramisu (optional)
+
+?> Tiramisu is now archived, and was succeeded by Aroma and considered outdated. No more Homebrew will be developed for it, and services like Pretendo have ended support for it.
+
+However, if you find the need to boot into Tiramisu, for example, to use a legacy Homebrew app, do the following:
 
 1. Download the latest files from [Tiramisu for your café](https://tiramisu.foryour.cafe).
 1. Copy the `wiiu` folder to the root of your SD Card.
@@ -44,6 +50,7 @@ If you find the need to boot into Tiramisu, for example, to use a legacy Homebre
 1. Take the SD Card out of your computer and plug it into your Wii U console.
 1. Start the EnvironmentLoader.
     - If you're autobooting into it, this can be done by powering on your console and holding X.
+    - You do not need to reinstall the PayloadLoader if you already did so with Aroma.
 1. Highlight the entry called `tiramisu` using the D-Pad.
 1. Launch Tiramisu by pressing A.
 1. Launch the Wii U Menu by pressing A.

translations/el_GR/docs/user-guide/aroma/getting-started.md

@@ -15,7 +15,7 @@ For a detailed overview check out [this blogpost](https://maschell.github.io/hom
 #### Modules
 
 Aroma supports modules, which unlike setup modules, always run in the background.  
-This allows further extending the functionality of the console.
+This allows for further extending the functionality of the console.
 
 #### Plugins
 

translations/el_GR/docs/user-guide/aroma/nand-backup.md

@@ -18,6 +18,6 @@ In case anything should go wrong in the later process and your Wii U ends up bri
    - Dump OTP: **yes**
    - Dump SEEPROM: **yes**
 3. Press the A button to start the dumping process.
-4. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC.
+4. When the process is completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC.
 5. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer.
 6. Delete the files from your SD Card to free up space.

translations/el_GR/docs/user-guide/aroma/sd-preparation.md

@@ -7,15 +7,12 @@ We will now place the required Aroma files on the SD Card.
 ?> **Notice** Your SD Card will need to be formatted as FAT32. If your SD Card is not formatted to FAT32, use [GUIFormat](http://ridgecrop.co.uk/index.htm?guiformat.htm) with 32k (32768) allocation unit size to format it.  
 **Do not** label the SD Card as `wiiu` or it will cause issues with homebrew.
 
-### What You Need
-
-- The latest release of the [PayloadLoader Installer](https://github.com/wiiu-env/PayloadLoaderInstaller/releases).
-
 ### Instructions
 
 1. On the [Aroma](https://aroma.foryour.cafe) site, scroll down to the **Download** section.
 1. Read through the steps and click on the checkboxes.
 1. Click on `Download Payloads` and `Download Base Aroma`.
+1. Download the [PayloadLoader Installer](https://github.com/wiiu-env/PayloadLoaderInstaller/releases/download/v0.1/PayloadLoaderInstaller_20220905-105329.zip)
 1. Insert your Wii U's SD Card into your PC.
 1. **Extract** and copy the `wiiu` folder of the three newly downloaded *`.zip`* files to the root of your SD Card.
     - The three `wiiu` folders should be merged if not done automatically.

translations/el_GR/docs/user-guide/vwii/patching-ios80.md

@@ -12,6 +12,6 @@ Patching IOS 80 allows you to have custom channels on the SD card, including wad
 4. Wait until it says <code>IOS80 <wbr>Installation <wbr>is <wbr>complete!</code>.
 5. Press any button to exit.
 
-!> Installing custom System Menu is a definite brick risk and you should always have an effective backup before installing one but when done right, won't brick the vWii.
+!> Installing a custom System Menu is a definite brick risk and you should always have an effective backup before installing one but when done right, won't brick the vWii.
 
 !> Installing any IOS (including TED IOSes) or wads made for the original Wii on your vWii will brick it. WiiWare wads are fine, but some need to be converted to work.

translations/el_GR/docs/user-guide/vwii/sd-preparation.md

@@ -18,7 +18,7 @@ Your SD Card will need to be formatted as FAT32. If your SD Card is not formatte
 ### What You Need
 
 - The latest files from [Aroma for your café](https://aroma.foryour.cafe).
-  - Click on `Download Payloads`and `Download Base Aroma`.
+  - Click on `Download Payloads` and `Download Base Aroma`.
   - Read through the steps and click on the checkboxes.
   - If you have already installed Aroma, you do not need to redownload it.
 - The latest release of the [Compat Title Installer](https://hbas-frontend.b-cdn.net/wiiu/CompatTitleInstaller).

translations/es_ES/docs/user-guide/archive/tiramisu/autoboot.md

@@ -11,7 +11,7 @@ Currently, every time you want to launch Tiramisu you will have to launch the He
 1. Press A to select `Check`.
 1. Select `Boot options`.
 1. You will be asked if you want to switch the boot title. Press A to select `Switch to PayloadLoader`.
-1. When the process finished, press A to shutdown the console.
+1. When the process is finished, press A to shutdown the console.
 1. The PayloadLoader will now be launched automatically on every boot.
     - To change the default boot title hold Start (+) on the Gamepad while booting the console. You cannot change the boot title until you set a default environment first.
     - Navigate the list using the D-Pad to hover on the title you want to autoboot in, then press the Y button to set this to your autoboot title.

translations/es_ES/docs/user-guide/archive/tiramisu/finalizing-setup.md

@@ -14,7 +14,7 @@ We are going to make the Tiramisu environment start automatically when your cons
     - You might get a red warning screen telling you that updates aren't blocked properly. Press A to continue anyway. We're going to block updates in the "Blocking Updates" section below.
     - To open the Environment Loader in the future, you have to hold X while your Wii U is booting up.
 1. On the Tiramisu Boot Selector, the `Wii U Menu` should already be selected, press Y to set this to your default autobooting option, then press A to launch into the Wii U Menu.
-    - To open the Tiramisu Boot Selector in the future, you have hold START (+) while your Wii U is booting up.
+    - To open the Tiramisu Boot Selector in the future, you have to hold START (+) while your Wii U is booting up.
 
 ?> Once you're booted into the Tiramisu environment, you can open the Mii Maker at any time to get into the Homebrew Launcher. <br>Homebrew Launcher will be empty for first-time modders. Follow the rest of the guide to install apps into the Homebrew Launcher. <br>To get back into the Mii Maker, simply press the HOME button while in the Homebrew Launcher.
 

translations/es_ES/docs/user-guide/archive/tiramisu/nand-backup.md

@@ -18,7 +18,7 @@ In case anything should go wrong in the later process and your Wii U ends up bri
     - Dump OTP: **yes**
     - Dump SEEPROM: **yes**
 1. Press the A button to start the dumping process.
-1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC.
+1. When the process is completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC.
 1. The files will appear on the root of the SD card.
 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` (and if you chose to go with a full backup, `every mlc.bin.part`) file to your computer.
 1. Delete the files from your SD Card to free up space.

translations/es_ES/docs/user-guide/aroma/autoboot.md

@@ -4,11 +4,11 @@
 
 Currently, every time you want to launch Aroma you will have to launch the Health and Safety information app. If you wish to automatically launch into Aroma on every boot, you can autoboot the Health and Safety Information app.
 
-If you don't want to autoobot Aroma, you can skip this step and follow the Setting Up PayloadLoader section below.
+If you don't want to autoboot Aroma, you can skip this step and follow the Setting Up PayloadLoader section below.
 
 ### Instructions
 
-1. Start the console to boot into the Wii U Menu, launch the Health and Safety Information app.
+1. Start the console to boot into the Wii U Menu, and then launch the Health and Safety Information app.
 2. Press A to launch the `aroma` environment.
 3. Press A to launch the Wii U Menu.
 4. Once you are at the Wii U Menu, launch the PayloadLoader Installer.
@@ -33,6 +33,6 @@ Now, we are going to make the Aroma environment start automatically when your co
 3. On the Aroma Boot Selector, the `Wii U Menu` should already be selected, press Y to set this to your default autobooting option, then press A to launch into the Wii U Menu.
 
 4. Aroma will now be launched each time you boot the console (or load Health and Safety) and then straight into the Wii U Menu.
-   - To open the Aroma Boot Selector in the future, you have hold START (+) while the console is booting or loading the Health and Safety Information app.
+   - To open the Aroma Boot Selector in the future, you have to hold START (+) while the console is booting or loading the Health and Safety Information app.
    - Navigate the list using the D-Pad to hover on the title you want to autoboot in, then press the Y button to set this to your autoboot title.
    - Press A to launch the selected title.

translations/es_ES/docs/user-guide/aroma/finalizing-setup.md

@@ -34,9 +34,15 @@ While Aroma's PayloadLoader already has built-in update blocking functionality,
 | [Bloopair](https://github.com/GaryOderNichts/Bloopair/) ([Download](https://github.com/GaryOderNichts/Bloopair/releases))          | Allows wirelessly connecting most popular Bluetooth capable controllers. | 1. Extract the contents of the newly downloaded `Bloopair_vX.X.X.zip` file. <br> 2. Copy the `30_bloopair.rpx` to the `wiiu/environments/aroma/modules/setup/` folder on the root of your SD Card. <br> 3. Copy the `wiiu` folder to the root of your SD Card. |
 | [Screenshot Plugin](https://github.com/wiiu-env/ScreenshotWUPS/) ([Download](https://github.com/wiiu-env/ScreenshotWUPS/releases)) | Allows taking screenshots directly to the SD Card.                       | 1. Extract the downloaded `screenshot_plugin_vX_X.zip` file. <br> 2. Copy the `screenshot.wps` to the `wiiu/environments/aroma/plugins` folder on the root of your SD Card.                                                                                          |
 
-### Booting Tiramisu
+### Pretendo Network
 
-If you find the need to boot into Tiramisu, for example, to use a legacy Homebrew app, do the following:
+Pretendo is a replacement service for the Nintendo Network, which brings back online services as they are set to be discontinued. It also revives the Miiverse service, via juxtaposition. The official guide can be found [here](https://pretendo.network/docs/install/wiiu).
+
+### Booting Tiramisu (optional)
+
+?> Tiramisu is now archived, and was succeeded by Aroma and considered outdated. No more Homebrew will be developed for it, and services like Pretendo have ended support for it.
+
+However, if you find the need to boot into Tiramisu, for example, to use a legacy Homebrew app, do the following:
 
 1. Download the latest files from [Tiramisu for your café](https://tiramisu.foryour.cafe).
 1. Copy the `wiiu` folder to the root of your SD Card.
@@ -44,6 +50,7 @@ If you find the need to boot into Tiramisu, for example, to use a legacy Homebre
 1. Take the SD Card out of your computer and plug it into your Wii U console.
 1. Start the EnvironmentLoader.
     - If you're autobooting into it, this can be done by powering on your console and holding X.
+    - You do not need to reinstall the PayloadLoader if you already did so with Aroma.
 1. Highlight the entry called `tiramisu` using the D-Pad.
 1. Launch Tiramisu by pressing A.
 1. Launch the Wii U Menu by pressing A.

translations/es_ES/docs/user-guide/aroma/getting-started.md

@@ -15,7 +15,7 @@ For a detailed overview check out [this blogpost](https://maschell.github.io/hom
 #### Modules
 
 Aroma supports modules, which unlike setup modules, always run in the background.  
-This allows further extending the functionality of the console.
+This allows for further extending the functionality of the console.
 
 #### Plugins
 

translations/es_ES/docs/user-guide/aroma/nand-backup.md

@@ -18,6 +18,6 @@ In case anything should go wrong in the later process and your Wii U ends up bri
    - Dump OTP: **yes**
    - Dump SEEPROM: **yes**
 3. Press the A button to start the dumping process.
-4. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC.
+4. When the process is completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC.
 5. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer.
 6. Delete the files from your SD Card to free up space.

translations/es_ES/docs/user-guide/aroma/sd-preparation.md

@@ -7,15 +7,12 @@ We will now place the required Aroma files on the SD Card.
 ?> **Notice** Your SD Card will need to be formatted as FAT32. If your SD Card is not formatted to FAT32, use [GUIFormat](http://ridgecrop.co.uk/index.htm?guiformat.htm) with 32k (32768) allocation unit size to format it.  
 **Do not** label the SD Card as `wiiu` or it will cause issues with homebrew.
 
-### What You Need
-
-- The latest release of the [PayloadLoader Installer](https://github.com/wiiu-env/PayloadLoaderInstaller/releases).
-
 ### Instructions
 
 1. On the [Aroma](https://aroma.foryour.cafe) site, scroll down to the **Download** section.
 1. Read through the steps and click on the checkboxes.
 1. Click on `Download Payloads` and `Download Base Aroma`.
+1. Download the [PayloadLoader Installer](https://github.com/wiiu-env/PayloadLoaderInstaller/releases/download/v0.1/PayloadLoaderInstaller_20220905-105329.zip)
 1. Insert your Wii U's SD Card into your PC.
 1. **Extract** and copy the `wiiu` folder of the three newly downloaded *`.zip`* files to the root of your SD Card.
     - The three `wiiu` folders should be merged if not done automatically.

translations/es_ES/docs/user-guide/vwii/patching-ios80.md

@@ -12,6 +12,6 @@ Patching IOS 80 allows you to have custom channels on the SD card, including wad
 4. Wait until it says <code>IOS80 <wbr>Installation <wbr>is <wbr>complete!</code>.
 5. Press any button to exit.
 
-!> Installing custom System Menu is a definite brick risk and you should always have an effective backup before installing one but when done right, won't brick the vWii.
+!> Installing a custom System Menu is a definite brick risk and you should always have an effective backup before installing one but when done right, won't brick the vWii.
 
 !> Installing any IOS (including TED IOSes) or wads made for the original Wii on your vWii will brick it. WiiWare wads are fine, but some need to be converted to work.

translations/es_ES/docs/user-guide/vwii/sd-preparation.md

@@ -18,7 +18,7 @@ Your SD Card will need to be formatted as FAT32. If your SD Card is not formatte
 ### What You Need
 
 - The latest files from [Aroma for your café](https://aroma.foryour.cafe).
-  - Click on `Download Payloads`and `Download Base Aroma`.
+  - Click on `Download Payloads` and `Download Base Aroma`.
   - Read through the steps and click on the checkboxes.
   - If you have already installed Aroma, you do not need to redownload it.
 - The latest release of the [Compat Title Installer](https://hbas-frontend.b-cdn.net/wiiu/CompatTitleInstaller).

translations/et_EE/docs/user-guide/archive/tiramisu/autoboot.md

@@ -11,7 +11,7 @@ Currently, every time you want to launch Tiramisu you will have to launch the He
 1. Press A to select `Check`.
 1. Select `Boot options`.
 1. You will be asked if you want to switch the boot title. Press A to select `Switch to PayloadLoader`.
-1. When the process finished, press A to shutdown the console.
+1. When the process is finished, press A to shutdown the console.
 1. The PayloadLoader will now be launched automatically on every boot.
     - To change the default boot title hold Start (+) on the Gamepad while booting the console. You cannot change the boot title until you set a default environment first.
     - Navigate the list using the D-Pad to hover on the title you want to autoboot in, then press the Y button to set this to your autoboot title.

translations/et_EE/docs/user-guide/archive/tiramisu/finalizing-setup.md

@@ -14,7 +14,7 @@ We are going to make the Tiramisu environment start automatically when your cons
     - You might get a red warning screen telling you that updates aren't blocked properly. Press A to continue anyway. We're going to block updates in the "Blocking Updates" section below.
     - To open the Environment Loader in the future, you have to hold X while your Wii U is booting up.
 1. On the Tiramisu Boot Selector, the `Wii U Menu` should already be selected, press Y to set this to your default autobooting option, then press A to launch into the Wii U Menu.
-    - To open the Tiramisu Boot Selector in the future, you have hold START (+) while your Wii U is booting up.
+    - To open the Tiramisu Boot Selector in the future, you have to hold START (+) while your Wii U is booting up.
 
 ?> Once you're booted into the Tiramisu environment, you can open the Mii Maker at any time to get into the Homebrew Launcher. <br>Homebrew Launcher will be empty for first-time modders. Follow the rest of the guide to install apps into the Homebrew Launcher. <br>To get back into the Mii Maker, simply press the HOME button while in the Homebrew Launcher.
 

translations/et_EE/docs/user-guide/archive/tiramisu/nand-backup.md

@@ -18,7 +18,7 @@ In case anything should go wrong in the later process and your Wii U ends up bri
     - Dump OTP: **yes**
     - Dump SEEPROM: **yes**
 1. Press the A button to start the dumping process.
-1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC.
+1. When the process is completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC.
 1. The files will appear on the root of the SD card.
 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` (and if you chose to go with a full backup, `every mlc.bin.part`) file to your computer.
 1. Delete the files from your SD Card to free up space.

translations/et_EE/docs/user-guide/aroma/autoboot.md

@@ -4,11 +4,11 @@
 
 Currently, every time you want to launch Aroma you will have to launch the Health and Safety information app. If you wish to automatically launch into Aroma on every boot, you can autoboot the Health and Safety Information app.
 
-If you don't want to autoobot Aroma, you can skip this step and follow the Setting Up PayloadLoader section below.
+If you don't want to autoboot Aroma, you can skip this step and follow the Setting Up PayloadLoader section below.
 
 ### Instructions
 
-1. Start the console to boot into the Wii U Menu, launch the Health and Safety Information app.
+1. Start the console to boot into the Wii U Menu, and then launch the Health and Safety Information app.
 2. Press A to launch the `aroma` environment.
 3. Press A to launch the Wii U Menu.
 4. Once you are at the Wii U Menu, launch the PayloadLoader Installer.
@@ -33,6 +33,6 @@ Now, we are going to make the Aroma environment start automatically when your co
 3. On the Aroma Boot Selector, the `Wii U Menu` should already be selected, press Y to set this to your default autobooting option, then press A to launch into the Wii U Menu.
 
 4. Aroma will now be launched each time you boot the console (or load Health and Safety) and then straight into the Wii U Menu.
-   - To open the Aroma Boot Selector in the future, you have hold START (+) while the console is booting or loading the Health and Safety Information app.
+   - To open the Aroma Boot Selector in the future, you have to hold START (+) while the console is booting or loading the Health and Safety Information app.
    - Navigate the list using the D-Pad to hover on the title you want to autoboot in, then press the Y button to set this to your autoboot title.
    - Press A to launch the selected title.

translations/et_EE/docs/user-guide/aroma/finalizing-setup.md

@@ -34,9 +34,15 @@ While Aroma's PayloadLoader already has built-in update blocking functionality,
 | [Bloopair](https://github.com/GaryOderNichts/Bloopair/) ([Download](https://github.com/GaryOderNichts/Bloopair/releases))          | Allows wirelessly connecting most popular Bluetooth capable controllers. | 1. Extract the contents of the newly downloaded `Bloopair_vX.X.X.zip` file. <br> 2. Copy the `30_bloopair.rpx` to the `wiiu/environments/aroma/modules/setup/` folder on the root of your SD Card. <br> 3. Copy the `wiiu` folder to the root of your SD Card. |
 | [Screenshot Plugin](https://github.com/wiiu-env/ScreenshotWUPS/) ([Download](https://github.com/wiiu-env/ScreenshotWUPS/releases)) | Allows taking screenshots directly to the SD Card.                       | 1. Extract the downloaded `screenshot_plugin_vX_X.zip` file. <br> 2. Copy the `screenshot.wps` to the `wiiu/environments/aroma/plugins` folder on the root of your SD Card.                                                                                          |
 
-### Booting Tiramisu
+### Pretendo Network
 
-If you find the need to boot into Tiramisu, for example, to use a legacy Homebrew app, do the following:
+Pretendo is a replacement service for the Nintendo Network, which brings back online services as they are set to be discontinued. It also revives the Miiverse service, via juxtaposition. The official guide can be found [here](https://pretendo.network/docs/install/wiiu).
+
+### Booting Tiramisu (optional)
+
+?> Tiramisu is now archived, and was succeeded by Aroma and considered outdated. No more Homebrew will be developed for it, and services like Pretendo have ended support for it.
+
+However, if you find the need to boot into Tiramisu, for example, to use a legacy Homebrew app, do the following:
 
 1. Download the latest files from [Tiramisu for your café](https://tiramisu.foryour.cafe).
 1. Copy the `wiiu` folder to the root of your SD Card.
@@ -44,6 +50,7 @@ If you find the need to boot into Tiramisu, for example, to use a legacy Homebre
 1. Take the SD Card out of your computer and plug it into your Wii U console.
 1. Start the EnvironmentLoader.
     - If you're autobooting into it, this can be done by powering on your console and holding X.
+    - You do not need to reinstall the PayloadLoader if you already did so with Aroma.
 1. Highlight the entry called `tiramisu` using the D-Pad.
 1. Launch Tiramisu by pressing A.
 1. Launch the Wii U Menu by pressing A.

translations/et_EE/docs/user-guide/aroma/getting-started.md

@@ -15,7 +15,7 @@ For a detailed overview check out [this blogpost](https://maschell.github.io/hom
 #### Modules
 
 Aroma supports modules, which unlike setup modules, always run in the background.  
-This allows further extending the functionality of the console.
+This allows for further extending the functionality of the console.
 
 #### Plugins
 

translations/et_EE/docs/user-guide/aroma/nand-backup.md

@@ -18,6 +18,6 @@ In case anything should go wrong in the later process and your Wii U ends up bri
    - Dump OTP: **yes**
    - Dump SEEPROM: **yes**
 3. Press the A button to start the dumping process.
-4. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC.
+4. When the process is completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC.
 5. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer.
 6. Delete the files from your SD Card to free up space.

translations/et_EE/docs/user-guide/aroma/sd-preparation.md

@@ -7,15 +7,12 @@ We will now place the required Aroma files on the SD Card.
 ?> **Notice** Your SD Card will need to be formatted as FAT32. If your SD Card is not formatted to FAT32, use [GUIFormat](http://ridgecrop.co.uk/index.htm?guiformat.htm) with 32k (32768) allocation unit size to format it.  
 **Do not** label the SD Card as `wiiu` or it will cause issues with homebrew.
 
-### What You Need
-
-- The latest release of the [PayloadLoader Installer](https://github.com/wiiu-env/PayloadLoaderInstaller/releases).
-
 ### Instructions
 
 1. On the [Aroma](https://aroma.foryour.cafe) site, scroll down to the **Download** section.
 1. Read through the steps and click on the checkboxes.
 1. Click on `Download Payloads` and `Download Base Aroma`.
+1. Download the [PayloadLoader Installer](https://github.com/wiiu-env/PayloadLoaderInstaller/releases/download/v0.1/PayloadLoaderInstaller_20220905-105329.zip)
 1. Insert your Wii U's SD Card into your PC.
 1. **Extract** and copy the `wiiu` folder of the three newly downloaded *`.zip`* files to the root of your SD Card.
     - The three `wiiu` folders should be merged if not done automatically.

translations/et_EE/docs/user-guide/vwii/patching-ios80.md

@@ -12,6 +12,6 @@ Patching IOS 80 allows you to have custom channels on the SD card, including wad
 4. Wait until it says <code>IOS80 <wbr>Installation <wbr>is <wbr>complete!</code>.
 5. Press any button to exit.
 
-!> Installing custom System Menu is a definite brick risk and you should always have an effective backup before installing one but when done right, won't brick the vWii.
+!> Installing a custom System Menu is a definite brick risk and you should always have an effective backup before installing one but when done right, won't brick the vWii.
 
 !> Installing any IOS (including TED IOSes) or wads made for the original Wii on your vWii will brick it. WiiWare wads are fine, but some need to be converted to work.

translations/et_EE/docs/user-guide/vwii/sd-preparation.md

@@ -18,7 +18,7 @@ Your SD Card will need to be formatted as FAT32. If your SD Card is not formatte
 ### What You Need
 
 - The latest files from [Aroma for your café](https://aroma.foryour.cafe).
-  - Click on `Download Payloads`and `Download Base Aroma`.
+  - Click on `Download Payloads` and `Download Base Aroma`.
   - Read through the steps and click on the checkboxes.
   - If you have already installed Aroma, you do not need to redownload it.
 - The latest release of the [Compat Title Installer](https://hbas-frontend.b-cdn.net/wiiu/CompatTitleInstaller).

translations/fi_FI/docs/user-guide/archive/tiramisu/autoboot.md

@@ -11,7 +11,7 @@ Currently, every time you want to launch Tiramisu you will have to launch the He
 1. Press A to select `Check`.
 1. Select `Boot options`.
 1. You will be asked if you want to switch the boot title. Press A to select `Switch to PayloadLoader`.
-1. When the process finished, press A to shutdown the console.
+1. When the process is finished, press A to shutdown the console.
 1. The PayloadLoader will now be launched automatically on every boot.
     - To change the default boot title hold Start (+) on the Gamepad while booting the console. You cannot change the boot title until you set a default environment first.
     - Navigate the list using the D-Pad to hover on the title you want to autoboot in, then press the Y button to set this to your autoboot title.

translations/fi_FI/docs/user-guide/archive/tiramisu/finalizing-setup.md

@@ -14,7 +14,7 @@ We are going to make the Tiramisu environment start automatically when your cons
     - You might get a red warning screen telling you that updates aren't blocked properly. Press A to continue anyway. We're going to block updates in the "Blocking Updates" section below.
     - To open the Environment Loader in the future, you have to hold X while your Wii U is booting up.
 1. On the Tiramisu Boot Selector, the `Wii U Menu` should already be selected, press Y to set this to your default autobooting option, then press A to launch into the Wii U Menu.
-    - To open the Tiramisu Boot Selector in the future, you have hold START (+) while your Wii U is booting up.
+    - To open the Tiramisu Boot Selector in the future, you have to hold START (+) while your Wii U is booting up.
 
 ?> Once you're booted into the Tiramisu environment, you can open the Mii Maker at any time to get into the Homebrew Launcher. <br>Homebrew Launcher will be empty for first-time modders. Follow the rest of the guide to install apps into the Homebrew Launcher. <br>To get back into the Mii Maker, simply press the HOME button while in the Homebrew Launcher.
 

translations/fi_FI/docs/user-guide/archive/tiramisu/nand-backup.md

@@ -18,7 +18,7 @@ In case anything should go wrong in the later process and your Wii U ends up bri
     - Dump OTP: **yes**
     - Dump SEEPROM: **yes**
 1. Press the A button to start the dumping process.
-1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC.
+1. When the process is completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC.
 1. The files will appear on the root of the SD card.
 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` (and if you chose to go with a full backup, `every mlc.bin.part`) file to your computer.
 1. Delete the files from your SD Card to free up space.

translations/fi_FI/docs/user-guide/aroma/autoboot.md

@@ -4,11 +4,11 @@
 
 Currently, every time you want to launch Aroma you will have to launch the Health and Safety information app. If you wish to automatically launch into Aroma on every boot, you can autoboot the Health and Safety Information app.
 
-If you don't want to autoobot Aroma, you can skip this step and follow the Setting Up PayloadLoader section below.
+If you don't want to autoboot Aroma, you can skip this step and follow the Setting Up PayloadLoader section below.
 
 ### Instructions
 
-1. Start the console to boot into the Wii U Menu, launch the Health and Safety Information app.
+1. Start the console to boot into the Wii U Menu, and then launch the Health and Safety Information app.
 2. Press A to launch the `aroma` environment.
 3. Press A to launch the Wii U Menu.
 4. Once you are at the Wii U Menu, launch the PayloadLoader Installer.
@@ -33,6 +33,6 @@ Now, we are going to make the Aroma environment start automatically when your co
 3. On the Aroma Boot Selector, the `Wii U Menu` should already be selected, press Y to set this to your default autobooting option, then press A to launch into the Wii U Menu.
 
 4. Aroma will now be launched each time you boot the console (or load Health and Safety) and then straight into the Wii U Menu.
-   - To open the Aroma Boot Selector in the future, you have hold START (+) while the console is booting or loading the Health and Safety Information app.
+   - To open the Aroma Boot Selector in the future, you have to hold START (+) while the console is booting or loading the Health and Safety Information app.
    - Navigate the list using the D-Pad to hover on the title you want to autoboot in, then press the Y button to set this to your autoboot title.
    - Press A to launch the selected title.

translations/fi_FI/docs/user-guide/aroma/finalizing-setup.md

@@ -34,9 +34,15 @@ While Aroma's PayloadLoader already has built-in update blocking functionality,
 | [Bloopair](https://github.com/GaryOderNichts/Bloopair/) ([Download](https://github.com/GaryOderNichts/Bloopair/releases))          | Allows wirelessly connecting most popular Bluetooth capable controllers. | 1. Extract the contents of the newly downloaded `Bloopair_vX.X.X.zip` file. <br> 2. Copy the `30_bloopair.rpx` to the `wiiu/environments/aroma/modules/setup/` folder on the root of your SD Card. <br> 3. Copy the `wiiu` folder to the root of your SD Card. |
 | [Screenshot Plugin](https://github.com/wiiu-env/ScreenshotWUPS/) ([Download](https://github.com/wiiu-env/ScreenshotWUPS/releases)) | Allows taking screenshots directly to the SD Card.                       | 1. Extract the downloaded `screenshot_plugin_vX_X.zip` file. <br> 2. Copy the `screenshot.wps` to the `wiiu/environments/aroma/plugins` folder on the root of your SD Card.                                                                                          |
 
-### Booting Tiramisu
+### Pretendo Network
 
-If you find the need to boot into Tiramisu, for example, to use a legacy Homebrew app, do the following:
+Pretendo is a replacement service for the Nintendo Network, which brings back online services as they are set to be discontinued. It also revives the Miiverse service, via juxtaposition. The official guide can be found [here](https://pretendo.network/docs/install/wiiu).
+
+### Booting Tiramisu (optional)
+
+?> Tiramisu is now archived, and was succeeded by Aroma and considered outdated. No more Homebrew will be developed for it, and services like Pretendo have ended support for it.
+
+However, if you find the need to boot into Tiramisu, for example, to use a legacy Homebrew app, do the following:
 
 1. Download the latest files from [Tiramisu for your café](https://tiramisu.foryour.cafe).
 1. Copy the `wiiu` folder to the root of your SD Card.
@@ -44,6 +50,7 @@ If you find the need to boot into Tiramisu, for example, to use a legacy Homebre
 1. Take the SD Card out of your computer and plug it into your Wii U console.
 1. Start the EnvironmentLoader.
     - If you're autobooting into it, this can be done by powering on your console and holding X.
+    - You do not need to reinstall the PayloadLoader if you already did so with Aroma.
 1. Highlight the entry called `tiramisu` using the D-Pad.
 1. Launch Tiramisu by pressing A.
 1. Launch the Wii U Menu by pressing A.

translations/fi_FI/docs/user-guide/aroma/getting-started.md

@@ -15,7 +15,7 @@ For a detailed overview check out [this blogpost](https://maschell.github.io/hom
 #### Modules
 
 Aroma supports modules, which unlike setup modules, always run in the background.  
-This allows further extending the functionality of the console.
+This allows for further extending the functionality of the console.
 
 #### Plugins
 

translations/fi_FI/docs/user-guide/aroma/nand-backup.md

@@ -18,6 +18,6 @@ In case anything should go wrong in the later process and your Wii U ends up bri
    - Dump OTP: **yes**
    - Dump SEEPROM: **yes**
 3. Press the A button to start the dumping process.
-4. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC.
+4. When the process is completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC.
 5. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer.
 6. Delete the files from your SD Card to free up space.

translations/fi_FI/docs/user-guide/aroma/sd-preparation.md

@@ -7,15 +7,12 @@ We will now place the required Aroma files on the SD Card.
 ?> **Notice** Your SD Card will need to be formatted as FAT32. If your SD Card is not formatted to FAT32, use [GUIFormat](http://ridgecrop.co.uk/index.htm?guiformat.htm) with 32k (32768) allocation unit size to format it.  
 **Do not** label the SD Card as `wiiu` or it will cause issues with homebrew.
 
-### What You Need
-
-- The latest release of the [PayloadLoader Installer](https://github.com/wiiu-env/PayloadLoaderInstaller/releases).
-
 ### Instructions
 
 1. On the [Aroma](https://aroma.foryour.cafe) site, scroll down to the **Download** section.
 1. Read through the steps and click on the checkboxes.
 1. Click on `Download Payloads` and `Download Base Aroma`.
+1. Download the [PayloadLoader Installer](https://github.com/wiiu-env/PayloadLoaderInstaller/releases/download/v0.1/PayloadLoaderInstaller_20220905-105329.zip)
 1. Insert your Wii U's SD Card into your PC.
 1. **Extract** and copy the `wiiu` folder of the three newly downloaded *`.zip`* files to the root of your SD Card.
     - The three `wiiu` folders should be merged if not done automatically.

translations/fi_FI/docs/user-guide/vwii/patching-ios80.md

@@ -12,6 +12,6 @@ Patching IOS 80 allows you to have custom channels on the SD card, including wad
 4. Wait until it says <code>IOS80 <wbr>Installation <wbr>is <wbr>complete!</code>.
 5. Press any button to exit.
 
-!> Installing custom System Menu is a definite brick risk and you should always have an effective backup before installing one but when done right, won't brick the vWii.
+!> Installing a custom System Menu is a definite brick risk and you should always have an effective backup before installing one but when done right, won't brick the vWii.
 
 !> Installing any IOS (including TED IOSes) or wads made for the original Wii on your vWii will brick it. WiiWare wads are fine, but some need to be converted to work.

translations/fi_FI/docs/user-guide/vwii/sd-preparation.md

@@ -18,7 +18,7 @@ Your SD Card will need to be formatted as FAT32. If your SD Card is not formatte
 ### What You Need
 
 - The latest files from [Aroma for your café](https://aroma.foryour.cafe).
-  - Click on `Download Payloads`and `Download Base Aroma`.
+  - Click on `Download Payloads` and `Download Base Aroma`.
   - Read through the steps and click on the checkboxes.
   - If you have already installed Aroma, you do not need to redownload it.
 - The latest release of the [Compat Title Installer](https://hbas-frontend.b-cdn.net/wiiu/CompatTitleInstaller).

translations/fr_FR/docs/user-guide/archive/tiramisu/autoboot.md

@@ -11,7 +11,7 @@ Actuellement, chaque fois que vous voudrez lancer Tiramisu, vous devrez lancer l
 1. Appuyez sur A pour sélectionner `Check`.
 1. Sélectionnez `Boot options`.
 1. Vous serez invité à choisir si vous souhaitez modifier le titre qui sera lancé lors du démarrage de la console. Appuyez sur A pour sélectionner `Switch to PayloadLoader`.
-1. Une fois le processus terminé, appuyez sur A pour éteindre la console.
+1. When the process is finished, press A to shutdown the console.
 1. Le PayloadLoader sera maintenant lancé automatiquement à chaque démarrage de la console.
     - To change the default boot title hold Start (+) on the Gamepad while booting the console. You cannot change the boot title until you set a default environment first.
     - Naviguez dans la liste en utilisant la croix directionnelle pour survoler le titre que vous voulez démarrer automatiquement, puis appuyez sur le bouton Y pour définir le titre qui sera lancé automatiquement au démarrage de la console.

translations/fr_FR/docs/user-guide/archive/tiramisu/finalizing-setup.md

@@ -14,7 +14,7 @@ We are going to make the Tiramisu environment start automatically when your cons
     - You might get a red warning screen telling you that updates aren't blocked properly. Press A to continue anyway. We're going to block updates in the "Blocking Updates" section below.
     - To open the Environment Loader in the future, you have to hold X while your Wii U is booting up.
 1. On the Tiramisu Boot Selector, the `Wii U Menu` should already be selected, press Y to set this to your default autobooting option, then press A to launch into the Wii U Menu.
-    - To open the Tiramisu Boot Selector in the future, you have hold START (+) while your Wii U is booting up.
+    - To open the Tiramisu Boot Selector in the future, you have to hold START (+) while your Wii U is booting up.
 
 ?> Once you're booted into the Tiramisu environment, you can open the Mii Maker at any time to get into the Homebrew Launcher. <br>Homebrew Launcher will be empty for first-time modders. Follow the rest of the guide to install apps into the Homebrew Launcher. <br>To get back into the Mii Maker, simply press the HOME button while in the Homebrew Launcher.
 

translations/fr_FR/docs/user-guide/archive/tiramisu/nand-backup.md

@@ -18,7 +18,7 @@ Au cas où quelque chose se passe mal dans le processus ultérieur et que votre
     - Dump OTP: **yes**
     - Dump SEEPROM: **yes**
 1. Appuyez sur le bouton A pour démarrer le processus de dumping.
-1. Une fois le processus terminé, éteignez votre Wii U, retirez votre carte SD de la Wii U et insérez-la dans votre PC.
+1. When the process is completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC.
 1. The files will appear on the root of the SD card.
 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` (and if you chose to go with a full backup, `every mlc.bin.part`) file to your computer.
 1. Supprimez les fichiers de votre carte SD pour libérer de l'espace.

translations/fr_FR/docs/user-guide/aroma/autoboot.md

@@ -4,11 +4,11 @@
 
 Currently, every time you want to launch Aroma you will have to launch the Health and Safety information app. If you wish to automatically launch into Aroma on every boot, you can autoboot the Health and Safety Information app.
 
-If you don't want to autoobot Aroma, you can skip this step and follow the Setting Up PayloadLoader section below.
+If you don't want to autoboot Aroma, you can skip this step and follow the Setting Up PayloadLoader section below.
 
 ### Instructions
 
-1. Start the console to boot into the Wii U Menu, launch the Health and Safety Information app.
+1. Start the console to boot into the Wii U Menu, and then launch the Health and Safety Information app.
 2. Press A to launch the `aroma` environment.
 3. Press A to launch the Wii U Menu.
 4. Once you are at the Wii U Menu, launch the PayloadLoader Installer.
@@ -33,6 +33,6 @@ Now, we are going to make the Aroma environment start automatically when your co
 3. On the Aroma Boot Selector, the `Wii U Menu` should already be selected, press Y to set this to your default autobooting option, then press A to launch into the Wii U Menu.
 
 4. Aroma will now be launched each time you boot the console (or load Health and Safety) and then straight into the Wii U Menu.
-   - To open the Aroma Boot Selector in the future, you have hold START (+) while the console is booting or loading the Health and Safety Information app.
+   - To open the Aroma Boot Selector in the future, you have to hold START (+) while the console is booting or loading the Health and Safety Information app.
    - Naviguez dans la liste en utilisant la croix directionnelle pour survoler le titre que vous voulez démarrer automatiquement, puis appuyez sur le bouton Y pour définir le titre qui sera lancé automatiquement au démarrage de la console.
    - Appuyez sur A pour lancer le titre sélectionné.

translations/fr_FR/docs/user-guide/aroma/finalizing-setup.md

@@ -34,9 +34,15 @@ While Aroma's PayloadLoader already has built-in update blocking functionality,
 | [Bloopair](https://github.com/GaryOderNichts/Bloopair/) ([Download](https://github.com/GaryOderNichts/Bloopair/releases))          | Allows wirelessly connecting most popular Bluetooth capable controllers. | 1. Extract the contents of the newly downloaded `Bloopair_vX.X.X.zip` file. <br> 2. Copy the `30_bloopair.rpx` to the `wiiu/environments/aroma/modules/setup/` folder on the root of your SD Card. <br> 3. Copy the `wiiu` folder to the root of your SD Card. |
 | [Screenshot Plugin](https://github.com/wiiu-env/ScreenshotWUPS/) ([Download](https://github.com/wiiu-env/ScreenshotWUPS/releases)) | Allows taking screenshots directly to the SD Card.                       | 1. Extract the downloaded `screenshot_plugin_vX_X.zip` file. <br> 2. Copy the `screenshot.wps` to the `wiiu/environments/aroma/plugins` folder on the root of your SD Card.                                                                                          |
 
-### Booting Tiramisu
+### Pretendo Network
 
-If you find the need to boot into Tiramisu, for example, to use a legacy Homebrew app, do the following:
+Pretendo is a replacement service for the Nintendo Network, which brings back online services as they are set to be discontinued. It also revives the Miiverse service, via juxtaposition. The official guide can be found [here](https://pretendo.network/docs/install/wiiu).
+
+### Booting Tiramisu (optional)
+
+?> Tiramisu is now archived, and was succeeded by Aroma and considered outdated. No more Homebrew will be developed for it, and services like Pretendo have ended support for it.
+
+However, if you find the need to boot into Tiramisu, for example, to use a legacy Homebrew app, do the following:
 
 1. Download the latest files from [Tiramisu for your café](https://tiramisu.foryour.cafe).
 1. Copy the `wiiu` folder to the root of your SD Card.
@@ -44,6 +50,7 @@ If you find the need to boot into Tiramisu, for example, to use a legacy Homebre
 1. Retirez la carte SD de votre ordinateur et branchez-la sur votre console Wii U.
 1. Start the EnvironmentLoader.
     - If you're autobooting into it, this can be done by powering on your console and holding X.
+    - You do not need to reinstall the PayloadLoader if you already did so with Aroma.
 1. Highlight the entry called `tiramisu` using the D-Pad.
 1. Launch Tiramisu by pressing A.
 1. Launch the Wii U Menu by pressing A.

translations/fr_FR/docs/user-guide/aroma/getting-started.md

@@ -15,7 +15,7 @@ For a detailed overview check out [this blogpost](https://maschell.github.io/hom
 #### Modules
 
 Aroma supports modules, which unlike setup modules, always run in the background.  
-This allows further extending the functionality of the console.
+This allows for further extending the functionality of the console.
 
 #### Plugins
 

translations/fr_FR/docs/user-guide/aroma/nand-backup.md

@@ -18,6 +18,6 @@ Au cas où quelque chose se passe mal dans le processus ultérieur et que votre
    - Dump OTP: **yes**
    - Dump SEEPROM: **yes**
 3. Appuyez sur le bouton A pour démarrer le processus de dumping.
-4. Une fois le processus terminé, éteignez votre Wii U, retirez votre carte SD de la Wii U et insérez-la dans votre PC.
+4. When the process is completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC.
 5. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer.
 6. Supprimez les fichiers de votre carte SD pour libérer de l'espace.

translations/fr_FR/docs/user-guide/aroma/sd-preparation.md

@@ -7,15 +7,12 @@ We will now place the required Aroma files on the SD Card.
 ?> **Remarque** Votre carte SD devra être formatée en FAT32. If your SD Card is not formatted to FAT32, use [GUIFormat](http://ridgecrop.co.uk/index.htm?guiformat.htm) with 32k (32768) allocation unit size to format it.  
 **Do not** label the SD Card as `wiiu` or it will cause issues with homebrew.
 
-### Ce dont vous avez besoin
-
-- The latest release of the [PayloadLoader Installer](https://github.com/wiiu-env/PayloadLoaderInstaller/releases).
-
 ### Instructions
 
 1. On the [Aroma](https://aroma.foryour.cafe) site, scroll down to the **Download** section.
 1. Read through the steps and click on the checkboxes.
 1. Click on `Download Payloads` and `Download Base Aroma`.
+1. Download the [PayloadLoader Installer](https://github.com/wiiu-env/PayloadLoaderInstaller/releases/download/v0.1/PayloadLoaderInstaller_20220905-105329.zip)
 1. Insérez la carte SD de votre Wii U dans votre PC.
 1. **Extract** and copy the `wiiu` folder of the three newly downloaded *`.zip`* files to the root of your SD Card.
     - The three `wiiu` folders should be merged if not done automatically.

translations/fr_FR/docs/user-guide/vwii/patching-ios80.md

@@ -12,6 +12,6 @@ Patching IOS 80 allows you to have custom channels on the SD card, including wad
 4. Wait until it says <code>IOS80 <wbr>Installation <wbr>is <wbr>complete!</code>.
 5. Press any button to exit.
 
-!> Installing custom System Menu is a definite brick risk and you should always have an effective backup before installing one but when done right, won't brick the vWii.
+!> Installing a custom System Menu is a definite brick risk and you should always have an effective backup before installing one but when done right, won't brick the vWii.
 
 !> Installing any IOS (including TED IOSes) or wads made for the original Wii on your vWii will brick it. WiiWare wads are fine, but some need to be converted to work.

translations/fr_FR/docs/user-guide/vwii/sd-preparation.md

@@ -18,7 +18,7 @@ Your SD Card will need to be formatted as FAT32. If your SD Card is not formatte
 ### Ce dont vous avez besoin
 
 - The latest files from [Aroma for your café](https://aroma.foryour.cafe).
-  - Click on `Download Payloads`and `Download Base Aroma`.
+  - Click on `Download Payloads` and `Download Base Aroma`.
   - Read through the steps and click on the checkboxes.
   - If you have already installed Aroma, you do not need to redownload it.
 - The latest release of the [Compat Title Installer](https://hbas-frontend.b-cdn.net/wiiu/CompatTitleInstaller).