Remove embeds in tabs

To make things readable on mobile

block-updates.md

@@ -11,32 +11,32 @@ Currently two ways exist to block updates on the Wii U system:
 ?> While this method of update blocking is a bit more advanced than DNS Blocking and currently requires at least basic knowledge on FTP Programs, it has the advantage that the eShop's functionality will not be restricted.
 
 ?> In order for this method to work, your Wii U needs to be in the same network as your Computer.
-> 1. Plug your SD Card into your Computer.
-> 1. Download and extract [ftpiiu_everywhere](http://wiiubru.com/appstore/zips/fpiiu-cbhc.zip) to the root of your SD Card.
-> 1. Download an FTP client of your choice such as [FileZilla](https://filezilla-project.org/download.php).
-> 1. Plug the SD Card into your Wii U console and power it on.
-> 1. Launch the CFW of your choice (mocha, haxchi/cbhc) and enter the Homebrew Launcher.
-> 1. Navigate the Homebrew Launcher and run the ftpiiu_everywhere app.
-> 1. Take note of the IP address on the Wii U screen.
-> 1. On your PC run your preferred FTP client and open an FTP connection to your Wii U. In FileZilla this can be done using the Site Manager, but be sure to replace the IP address with the one shown on your Wii U screen:
+1. Plug your SD Card into your Computer.
+1. Download and extract [ftpiiu_everywhere](http://wiiubru.com/appstore/zips/fpiiu-cbhc.zip) to the root of your SD Card.
+1. Download an FTP client of your choice such as [FileZilla](https://filezilla-project.org/download.php).
+1. Plug the SD Card into your Wii U console and power it on.
+1. Launch the CFW of your choice (mocha, haxchi/cbhc) and enter the Homebrew Launcher.
+1. Navigate the Homebrew Launcher and run the ftpiiu_everywhere app.
+1. Take note of the IP address on the Wii U screen.
+1. On your PC run your preferred FTP client and open an FTP connection to your Wii U. In FileZilla this can be done using the Site Manager, but be sure to replace the IP address with the one shown on your Wii U screen:  
 ![FileZilla](https://cdn.discordapp.com/attachments/399670410565910529/533075194546356224/1.png)
-> 1. Navigate to `/storage_mlc/sys`. You should see an empty folder called `update`.
-> 1. Right click the folder and delete it.
-> 1. You are now blocking updates.
+1. Navigate to `/storage_mlc/sys`. You should see an empty folder called `update`.
+1. Right click the folder and delete it.
+1. You are now blocking updates.
 
 ### **DNS Blocking**
 ?> This method is the easier method and is recommended to less advanced users. It does, however, prevent the eShop from working. This can be worked around by running [NNUPatcher](http://www.wiiubru.com/appstore/zips/nnupatcher.zip) before starting the eShop.
-> 1. Plug your SD Card into your Computer.
-> 1. Extract the `nnupatcher.zip` file to the root of your SD Card. If asked, overwrite any duplicate files.
-> 1. Plug the SD Card into your Wii U console and power it on.
-> 1. Enter the Wii U's system settings and navigate to `Internet > Connect to the Internet > Connection List >`
-> `Your WiFi connection > Change Settings > DNS` and set the option to `Do not auto-obtain`.
-> 1. You will be asked to input a primary and secondary DNS. Enter the following IP addresses:
-  - Primary DNS: 168.2.235.092.108
-  - Secondary DNS: 081.004.127.020
+1. Plug your SD Card into your Computer.
+1. Extract the `nnupatcher.zip` file to the root of your SD Card. If asked, overwrite any duplicate files.
+1. Plug the SD Card into your Wii U console and power it on.
+1. Enter the Wii U's system settings and navigate to `Internet > Connect to the Internet > Connection List >`
+`Your WiFi connection > Change Settings > DNS` and set the option to `Do not auto-obtain`.
+1. You will be asked to input a primary and secondary DNS. Enter the following IP addresses:
+ - Primary DNS: 168.2.235.092.108
+ - Secondary DNS: 081.004.127.020
 ![DNS Block](https://cdn.discordapp.com/attachments/591032870798229535/650494263322214431/DNS.png)
-> 1. Click on confirm
-> 1. You are now blocking updates. In order to access the eShop, run the nnupatcher app from the Homebrew Launcher before launching the eShop
+1. Click on confirm
+1. You are now blocking updates. In order to access the eShop, run the nnupatcher app from the Homebrew Launcher before launching the eShop
 
 
 <!-- tabs:end -->

dump-games.md

@@ -18,21 +18,21 @@ Dumping your Discs allows you to install a copy of your game to the system NAND/
 
 ### Instructions
 
-> 1. Extract the `disc2app.zip` file to the root of your SD Card.
-> 1. Take the SD Card out of your PC and plug it into your Wii U.
-> 1. Power on your Wii U.
-> 1. Eject your game disc if you have one inserted
-> 1. Launch the Homebrew Launcher and start the disc2app app.
-> 1. Press the A button to start the dumping process to the SD Card.
-> 1. When prompted, insert the game disc you want to dump
-> 1. When the process is complete, your Wii U will launch the Wii U Menu.
-> 1. Launch the Homebrew Launcher and start the WUP Installer GX2 app.
-> 1. Select your game (`WUP-X-XXXX`), press `Install` and confirm with `Yes`.
-> 1. Select NAND as the installation destination.
-> 1. When the process is complete, your Wii U will launch the Wii U Menu.
-> 1. You should see your game installed, ready to be played.
-> 1. Take the SD Card out of your Wii U and plug it into your PC.
-> 1. Delete the `WUP-X-XXXX` folder in the `install` directory on your SD Card to free up space.
+1. Extract the `disc2app.zip` file to the root of your SD Card.
+1. Take the SD Card out of your PC and plug it into your Wii U.
+1. Power on your Wii U.
+1. Eject your game disc if you have one inserted
+1. Launch the Homebrew Launcher and start the disc2app app.
+1. Press the A button to start the dumping process to the SD Card.
+1. When prompted, insert the game disc you want to dump
+1. When the process is complete, your Wii U will launch the Wii U Menu.
+1. Launch the Homebrew Launcher and start the WUP Installer GX2 app.
+1. Select your game (`WUP-X-XXXX`), press `Install` and confirm with `Yes`.
+1. Select NAND as the installation destination.
+1. When the process is complete, your Wii U will launch the Wii U Menu.
+1. You should see your game installed, ready to be played.
+1. Take the SD Card out of your Wii U and plug it into your PC.
+1. Delete the `WUP-X-XXXX` folder in the `install` directory on your SD Card to free up space.
 
 #### **Install to USB**
 
@@ -47,32 +47,32 @@ Dumping your Discs allows you to install a copy of your game to the system NAND/
 
 ### Instructions
 
-> 1. Extract the `disc2app.zip` file to the root of your SD Card.
-> 1. Take the SD Card out of your PC and plug it into your Wii U.
-> 1. Plug your USB HDD into the Wii U.
-> 1. Power on your Wii U.
-> 1. Your Wii U will prompt you to format your HDD. Confirm with Yes.
-> 1. Eject your game disc if you have one inserted
-> 1. Launch the Homebrew Launcher and start the disc2app app.
-> 1. Press the A button to start the dumping process to the SD Card.
-> 1. When prompted, insert the game disc you want to dump
-> 1. When the process is complete, your Wii U will launch the Wii U Menu.
-> 1. Launch the Homebrew Launcher and start the WUP Installer GX2 app.
-> 1. Select your game (`WUP-X-XXXX`), press `Install` and confirm with `Yes`.
-> 1. Select USB as the installation destination.
-> 1. When the process is complete, your Wii U will launch the Wii U Menu.
-> 1. You should see your game installed, ready to be played.
-> 1. Take the SD Card out of your Wii U and plug it into your PC.
-> 1. Delete the `WUP-X-XXXX` folder in the `install` directory on your SD Card to free up space.
+1. Extract the `disc2app.zip` file to the root of your SD Card.
+1. Take the SD Card out of your PC and plug it into your Wii U.
+1. Plug your USB HDD into the Wii U.
+1. Power on your Wii U.
+1. Your Wii U will prompt you to format your HDD. Confirm with Yes.
+1. Eject your game disc if you have one inserted
+1. Launch the Homebrew Launcher and start the disc2app app.
+1. Press the A button to start the dumping process to the SD Card.
+1. When prompted, insert the game disc you want to dump
+1. When the process is complete, your Wii U will launch the Wii U Menu.
+1. Launch the Homebrew Launcher and start the WUP Installer GX2 app.
+1. Select your game (`WUP-X-XXXX`), press `Install` and confirm with `Yes`.
+1. Select USB as the installation destination.
+1. When the process is complete, your Wii U will launch the Wii U Menu.
+1. You should see your game installed, ready to be played.
+1. Take the SD Card out of your Wii U and plug it into your PC.
+1. Delete the `WUP-X-XXXX` folder in the `install` directory on your SD Card to free up space.
 
 ### Move updates/DLC to USB
 
 ?> If your disc game had DLC or updates installed, you will need to transfer the files over to your USB device. You can do this using the Wii U's data management.
 
-> 1. Power on your Wii U
-> 1. Open the Wii U's System Settings.
-> 1. Navigate to `Data Management > Copy/Move/Delete Data > System Memory > Move Items (X)`.
-> 1. Select your game and move the update and DLC data to the USB device.
+1. Power on your Wii U
+1. Open the Wii U's System Settings.
+1. Navigate to `Data Management > Copy/Move/Delete Data > System Memory > Move Items (X)`.
+1. Select your game and move the update and DLC data to the USB device.
 
 #### **Install from USB**
 
@@ -90,32 +90,32 @@ Dumping your Discs allows you to install a copy of your game to the system NAND/
 ?> **Notice**
     Your USB device will need to be formatted as FAT32. If your USB is not formatted to FAT32, use [GUIFormat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) with 32k (32768) Allocation unit size to format it.
 
-> 1. Extract the `homebrew_launcher.v.1.4.zip` file to the root of your USB device.
-> 1. Extract the `disc2app.zip` file to the root of your USB device.
-> 1. Extract the `wup_installer_gx2.zip` file to the root of your USB device
-> 1. Extract the `mocha_fat32.zip` file to the root of your SD Card.
-> 1. Take the SD Card out of your PC and plug it into your Wii U console.
-> 1. Power on your Wii U.
-> 1. Plug in your USB device. The Wii U will ask you format it. Cancel with No!
-> 1. Launch the Homebrew Launcher and start the MochaFAT32 app.
-> 1. In the configuration menu, set the following settings:
+1. Extract the `homebrew_launcher.v.1.4.zip` file to the root of your USB device.
+1. Extract the `disc2app.zip` file to the root of your USB device.
+1. Extract the `wup_installer_gx2.zip` file to the root of your USB device
+1. Extract the `mocha_fat32.zip` file to the root of your SD Card.
+1. Take the SD Card out of your PC and plug it into your Wii U console.
+1. Power on your Wii U.
+1. Plug in your USB device. The Wii U will ask you format it. Cancel with No!
+1. Launch the Homebrew Launcher and start the MochaFAT32 app.
+1. In the configuration menu, set the following settings:
   - Config view mode: default
   - Skip this menu on launch: on
   - Don't relaunch OS: off
   - Launch System Menu: on
   - RedNAND: off
-> 1. Your console will load the Wii U menu with your USB device now replacing the SD Card.
-> 1. Launch the Homebrew Launcher and open the disc2app app.
-> 1. Eject any inserted game disc and press the A button to begin the dumping process.
-> 1. When prompted, insert the game disc you want to dump.
-> 1. When the process is complete, your Wii U will launch the Wii U Menu.
-> 1. Launch the Homebrew Launcher and start the WUP Installer GX2 app.
-> 1. Select your game (`WUP-X-XXXX`), press `Install` and confirm with `Yes`.
-> 1. Select NAND as the installation destination.
-> 1. When the process is complete, your Wii U will launch the Wii U Menu.
-> 1. You should see your game installed, ready to be played.
-> 1. Take the USB device out of your Wii U and plug it into your PC.
-> 2. Delete the `WUP-X-XXXX` folder in the `install` directory on your USB device to free up space.
+1. Your console will load the Wii U menu with your USB device now replacing the SD Card.
+1. Launch the Homebrew Launcher and open the disc2app app.
+1. Eject any inserted game disc and press the A button to begin the dumping process.
+1. When prompted, insert the game disc you want to dump.
+1. When the process is complete, your Wii U will launch the Wii U Menu.
+1. Launch the Homebrew Launcher and start the WUP Installer GX2 app.
+1. Select your game (`WUP-X-XXXX`), press `Install` and confirm with `Yes`.
+1. Select NAND as the installation destination.
+1. When the process is complete, your Wii U will launch the Wii U Menu.
+1. You should see your game installed, ready to be played.
+1. Take the USB device out of your Wii U and plug it into your PC.
+2. Delete the `WUP-X-XXXX` folder in the `install` directory on your USB device to free up space.
 
 ### Moving the game to USB
 
@@ -123,12 +123,12 @@ Dumping your Discs allows you to install a copy of your game to the system NAND/
 
 !> In order to move your game to an USB device, it has to be formatted by the Wii U. Doing this will erase all contents of it, and prevent it from being used on another system unless you re-format it.
 
-> 1. Reboot your Wii U to remove the effect of MochaFAT32.
-> 1. Plug your USB device into the Wii U.
-> 1. Power on your Wii U.
-> 1. Your Wii U will prompt you to format your USB device. Confirm with Yes.
-> 1. Open the Wii U's System Settings.
-> 1. Navigate to `Data Management > Copy/Move/Delete Data > System Memory > Move Items (X)`
-> 1. Select the game and move all data (including updates and DLC if any are installed) to your USB device.
+1. Reboot your Wii U to remove the effect of MochaFAT32.
+1. Plug your USB device into the Wii U.
+1. Power on your Wii U.
+1. Your Wii U will prompt you to format your USB device. Confirm with Yes.
+1. Open the Wii U's System Settings.
+1. Navigate to `Data Management > Copy/Move/Delete Data > System Memory > Move Items (X)`
+1. Select the game and move all data (including updates and DLC if any are installed) to your USB device.
 
 <!-- tabs:end -->

installing-hbc.md

@@ -10,25 +10,25 @@ This page will install the Homebrew Launcher Channel as an application directly
 
 #### **Haxchi**
 
-> 1. Power on your console
-> 1. Launch the Haxchi DS game from the Wii U Menu. This will re-launch the Wii U Menu with CFW activated.
-> 1. Launch the Haxchi DS game again while holding the A button. This will launch the Homebrew Launcher.
-> 1. Navigate the Homebrew Launcher and launch the WUP Installer GX2 app.
-> 1. Use the touchscreen to select `hbc`. Press `Install` and confirm with `Yes`.
-> 1. Select NAND as the installation destination. This will install the Homebrew Launcher Channel to the Wii U Menu.
-> 1. Once the process is finished, press the Home button until you're back at the Wii U Menu.
-> 1. You will now see the Homebrew Launcher Channel installed on your Wii U Menu. Keep in mind you will need to launch cfw every reboot to run this channel.
+1. Power on your console
+1. Launch the Haxchi DS game from the Wii U Menu. This will re-launch the Wii U Menu with CFW activated.
+1. Launch the Haxchi DS game again while holding the A button. This will launch the Homebrew Launcher.
+1. Navigate the Homebrew Launcher and launch the WUP Installer GX2 app.
+1. Use the touchscreen to select `hbc`. Press `Install` and confirm with `Yes`.
+1. Select NAND as the installation destination. This will install the Homebrew Launcher Channel to the Wii U Menu.
+1. Once the process is finished, press the Home button until you're back at the Wii U Menu.
+1. You will now see the Homebrew Launcher Channel installed on your Wii U Menu. Keep in mind you will need to launch cfw every reboot to run this channel.
 
 ### **CBHC**
 
-> 1. Power on your console
-> 1. Press the Home button during the `Autobooting...` screen to get into the boot menu.
-> 1. Select `Boot Homebrew Launcher` to launch the Homebrew Launcher.
-> 1. Navigate the Homebrew Launcher and launch the WUP Installer GX2 app.
-> 1. Use the touchscreen to select `hbc`. Press `Install` and confirm with `Yes`.
-> 1. Select NAND as the installation destination. This will install the Homebrew Launcher Channel to the Wii U Menu.
-> 1. Once the process is finished, press the Home button until you're back at the Wii U Menu.
-> 1. You will now see the Homebrew Launcher Channel installed on your Wii U Menu.
+1. Power on your console
+1. Press the Home button during the `Autobooting...` screen to get into the boot menu.
+1. Select `Boot Homebrew Launcher` to launch the Homebrew Launcher.
+1. Navigate the Homebrew Launcher and launch the WUP Installer GX2 app.
+1. Use the touchscreen to select `hbc`. Press `Install` and confirm with `Yes`.
+1. Select NAND as the installation destination. This will install the Homebrew Launcher Channel to the Wii U Menu.
+1. Once the process is finished, press the Home button until you're back at the Wii U Menu.
+1. You will now see the Homebrew Launcher Channel installed on your Wii U Menu.
 
 ### **Mocha**
 !> The Homebrew Launcher Channel is not compatible with Mocha

launching-cfw.md

@@ -10,41 +10,41 @@ Unlike systems such as the DSi, Wii, or 3DS, Wii U CFW is temporary. This means
 
 #### **Haxchi**
 
-> 1. Take the SD Card out of your PC and plug it into your Wii U.
-> 1. If you haven't already, now download your DS VC game of choice from the eShop.
-> 1. Launch the Homebrew Launcher on your system as [previously explained](/browser-exploit).
-> 1. Navigate the Homebrew Launcher and open the Haxchi app.
-> 1. Use the DPAD to navigate the cursor to the game you want to install haxchi to and press the A button to install it.
-> 1. Once the installation has finished, your console will launch the Wii U Menu. You will see your game replaced by a haxchi icon.
-> 1. Run the modified DS game. This will reboot the console and enable CFW.
-> 1. You will need to run your Haxchi DS game every reboot to launch CFW.
-> 1. You can now re-attach any USB devices you had attached before starting the guide.
+1. Take the SD Card out of your PC and plug it into your Wii U.
+1. If you haven't already, now download your DS VC game of choice from the eShop.
+1. Launch the Homebrew Launcher on your system as [previously explained](/browser-exploit).
+1. Navigate the Homebrew Launcher and open the Haxchi app.
+1. Use the DPAD to navigate the cursor to the game you want to install haxchi to and press the A button to install it.
+1. Once the installation has finished, your console will launch the Wii U Menu. You will see your game replaced by a haxchi icon.
+1. Run the modified DS game. This will reboot the console and enable CFW.
+1. You will need to run your Haxchi DS game every reboot to launch CFW.
+1. You can now re-attach any USB devices you had attached before starting the guide.
 
 #### **CBHC**
 
-> 1. Take the SD Card out of your PC and plug it into your Wii U.
-> 1. If you haven't already, now download your DS VC game of choice from the eShop.
-> 1. Launch the Homebrew Launcher on your system as [previously explained](/browser-exploit).
-> 1. Navigate the Homebrew Launcher and open the Haxchi app.
-> 1. Use the DPAD to navigate the cursor to the game you want to install haxchi to and press the A button to install it.
-> 1. Once the installation has finished, your console will launch the Wii U Menu. You will see your game replaced by a haxchi icon.
-> 1. Run the modified DS game. This will reboot the console and enable CFW.
-> 1. Run the modified DS game again and hold the A button after launching it. This will run the Homebrew Launcher.
-> 1. Navigate the Homebrew launcher and run the CBHC app.
-> 1. Use the DPAD to navigate the cursor to the game you previously installed haxchi to and press the A button to install CBHC.
-> 1. Once the installation has finished, your console will launch the Wii U Menu.
-> 1. Reboot your console. If CBHC installed correctly, you should see a new boot menu.
-> 1. Use the DPAD to navigate to `Autoboot: Disabled` and press the A button until it says `Autoboot: System Menu`.
-> 1. Use the DPAD to navigate to `Boot System Menu` and press the A button. This will launch the Wii U Menu with CFW enabled.
-> 1. Your console now automatically boots into CFW every reboot.
-> 1. You can now re-attach any USB devices you had attached before starting the guide.
+1. Take the SD Card out of your PC and plug it into your Wii U.
+1. If you haven't already, now download your DS VC game of choice from the eShop.
+1. Launch the Homebrew Launcher on your system as [previously explained](/browser-exploit).
+1. Navigate the Homebrew Launcher and open the Haxchi app.
+1. Use the DPAD to navigate the cursor to the game you want to install haxchi to and press the A button to install it.
+1. Once the installation has finished, your console will launch the Wii U Menu. You will see your game replaced by a haxchi icon.
+1. Run the modified DS game. This will reboot the console and enable CFW.
+1. Run the modified DS game again and hold the A button after launching it. This will run the Homebrew Launcher.
+1. Navigate the Homebrew launcher and run the CBHC app.
+1. Use the DPAD to navigate the cursor to the game you previously installed haxchi to and press the A button to install CBHC.
+1. Once the installation has finished, your console will launch the Wii U Menu.
+1. Reboot your console. If CBHC installed correctly, you should see a new boot menu.
+1. Use the DPAD to navigate to `Autoboot: Disabled` and press the A button until it says `Autoboot: System Menu`.
+1. Use the DPAD to navigate to `Boot System Menu` and press the A button. This will launch the Wii U Menu with CFW enabled.
+1. Your console now automatically boots into CFW every reboot.
+1. You can now re-attach any USB devices you had attached before starting the guide.
 
 #### **Mocha**
 
-> 1. Take the SD Card out of your PC and plug it into your Wii U.
-> 1. Launch the Homebrew Launcher on your system as [previously explained](/browser-exploit).
-> 1. Navigate the Homebrew Launcher and open the Mocha app.
-> 1. Your console will launch the Wii U Menu and enable CFW.
-> 1. You will need to re-do these steps every reboot to launch cfw.
+1. Take the SD Card out of your PC and plug it into your Wii U.
+1. Launch the Homebrew Launcher on your system as [previously explained](/browser-exploit).
+1. Navigate the Homebrew Launcher and open the Mocha app.
+1. Your console will launch the Wii U Menu and enable CFW.
+1. You will need to re-do these steps every reboot to launch cfw.
 
 <!-- tabs:end -->

recover-ios.md

@@ -24,21 +24,21 @@ This page will guide you through the process of recovering a corrupted IOS on yo
 
 !> If you are using a system update blocking method, please [remove it](unblock-updates).
 
-> 1. Power on your Wii U and launch the CFW of your choice (Mocha, Haxchi or CBHC)
-> 1. Launch the Homebrew Launcher and FTPiiU Everywhere
-> 1. Launch FileZilla on your computer
-> 1. In FileZilla, type in the IP address displayed by your Wii U in the `Host` field at the top of the window and click on `Quickconnect`
-> 1. Navigate to `/slccmpt01/title/00000001`
-> 1. Delete the `00000050` folder
-> 1. Navigate to `/slccmpt01/ticket/00000001`
-> 1. Delete the `00000050.tik` file
-> 1. On your computer, double click the previously downloaded `.py` file
-> 1. Type in your Wii U's IP address and press Enter
-> 1. Wait for it to finish what it's doing
->  - If an `err.log` file has been generated, please visit us in **#wiiu-assistance** on [Nintendo Homebrew Discord](https://discord.gg/C29hYvh)
-> 1. Exit FTPiiU Everywhere and the Homebrew Launcher
-> 1. Launch the System Settings
-> 1. Perform a System Update
+1. Power on your Wii U and launch the CFW of your choice (Mocha, Haxchi or CBHC)
+1. Launch the Homebrew Launcher and FTPiiU Everywhere
+1. Launch FileZilla on your computer
+1. In FileZilla, type in the IP address displayed by your Wii U in the `Host` field at the top of thewindow and click on `Quickconnect`
+1. Navigate to `/slccmpt01/title/00000001`
+1. Delete the `00000050` folder
+1. Navigate to `/slccmpt01/ticket/00000001`
+1. Delete the `00000050.tik` file
+1. On your computer, double click the previously downloaded `.py` file
+1. Type in your Wii U's IP address and press Enter
+1. Wait for it to finish what it's doing
+  - If an `err.log` file has been generated, please visit us in **#wiiu-assistance** on [Nintendo Homebrew Discord](https://discord.gg/C29hYvh)
+1. Exit FTPiiU Everywhere and the Homebrew Launcher
+1. Launch the System Settings
+1. Perform a System Update
 
 ?> You can now re-enable your [system update blocking method](block-updates).
 
@@ -48,23 +48,23 @@ This page will guide you through the process of recovering a corrupted IOS on yo
 
 !> If you are using a system update blocking method, please [remove it](unblock-updates).
 
-> 1. Power on your Wii U and launch the CFW of your choice (Mocha, Haxchi or CBHC)
-> 1. Launch the Homebrew Launcher
-> 1. Launch FTPiiU Everywhere
-> 1. Launch FileZilla
-> 1. Type in the IP address displayed by your Wii U in the `Host` field at the top of the window and click on `Quickconnect`
-> 1. In FileZilla, navigate to `/slccmpt01/title/00000001`
-> 1. Go to [this page](ios-folders) to see which folder/ticket you need to delete
-> 1. Delete the corresponding folder of the IOS you want to recover
-> 1. Navigate to `/slccmpt01/ticket/00000001`
-> 1. Delete the corresponding `.tik` file of the IOS you want to recover
-> 1. Double click the previously downloaded `.py` file
-> 1. Type in your Wii U's IP address and press Enter
-> 1. Wait for it to finish what it's doing
->  - If an `err.log` file has been generated, please visit us in **#wiiu-assistance** on [Nintendo Homebrew Discord](https://discord.gg/C29hYvh)
-> 1. Exit FTPiiU Everywhere and the Homebrew Launcher
-> 1. Launch the System Settings
-> 1. Perform a System Update
+1. Power on your Wii U and launch the CFW of your choice (Mocha, Haxchi or CBHC)
+1. Launch the Homebrew Launcher
+1. Launch FTPiiU Everywhere
+1. Launch FileZilla
+1. Type in the IP address displayed by your Wii U in the `Host` field at the top of the window and click on `Quickconnect`
+1. In FileZilla, navigate to `/slccmpt01/title/00000001`
+1. Go to [this page](ios-folders) to see which folder/ticket you need to delete
+1. Delete the corresponding folder of the IOS you want to recover
+1. Navigate to `/slccmpt01/ticket/00000001`
+1. Delete the corresponding `.tik` file of the IOS you want to recover
+1. Double click the previously downloaded `.py` file
+1. Type in your Wii U's IP address and press Enter
+1. Wait for it to finish what it's doing
+ - If an `err.log` file has been generated, please visit us in **#wiiu-assistance** on [Nintendo Homebrew Discord](https://discord.gg/C29hYvh)
+1. Exit FTPiiU Everywhere and the Homebrew Launcher
+1. Launch the System Settings
+1. Perform a System Update
 
 ?> You can now re-enable your [system update blocking method](block-updates).
 

sd-preparation.md

@@ -11,48 +11,48 @@ We will now place the required CFW files and some additional homebrew files on t
 
 #### **Haxchi**
 
-> - The Haxchi <a href="/files/config.txt" download>config</a>
-> - The latest release of [Homebrew Launcher Installer](https://github.com/wiiu-env/homebrew_launcher_installer/releases/latest)
->   - You will need to download the `payload.zip` file.
-> - The 1.4 release of [The Homebrew Launcher](https://github.com/dimok789/homebrew_launcher/releases/tag/1.4)
->   - You will need to download the v1.4 `homebrew_launcher.v1.4.zip` release of The Homebrew Launcher
-> - The latest release of [WUP Installer GX2](http://wiiubru.com/appstore/zips/wup_installer_gx2.zip)
-> - The latest release of [The Homebrew Launcher Channel](https://github.com/dimok789/homebrew_launcher/releases/latest)
->   - You will need to download the `channel.zip` file.
-> - The latest release of [Wii U NAND Dumper](https://github.com/koolkdev/wiiu-nanddumper/releases/latest)
-> - The latest release of the [Homebrew App Store](https://github.com/vgmoose/hbas/releases/latest)
->   - You will need to download the `wiiu-exracttosd.zip` file.
-> - The latest release of [Haxchi](https://github.com/FIX94/haxchi/releases/latest)
->   - Download only the Haxchi .zip file.
+- The Haxchi <a href="/files/config.txt" download>config</a>
+- The latest release of [Homebrew Launcher Installer](https://github.com/wiiu-env/homebrew_launcher_installer/releases/latest)
+  - You will need to download the `payload.zip` file.
+- The 1.4 release of [The Homebrew Launcher](https://github.com/dimok789/homebrew_launcher/releases/tag/1.4)
+  - You will need to download the v1.4 `homebrew_launcher.v1.4.zip` release of The Homebrew Launcher
+- The latest release of [WUP Installer GX2](http://wiiubru.com/appstore/zips/wup_installer_gx2.zip)
+- The latest release of [The Homebrew Launcher Channel](https://github.com/dimok789/homebrew_launcher/releases/latest)
+  - You will need to download the `channel.zip` file.
+- The latest release of [Wii U NAND Dumper](https://github.com/koolkdev/wiiu-nanddumper/releases/latest)
+- The latest release of the [Homebrew App Store](https://github.com/vgmoose/hbas/releases/latest)
+  - You will need to download the `wiiu-exracttosd.zip` file.
+- The latest release of [Haxchi](https://github.com/FIX94/haxchi/releases/latest)
+  - Download only the Haxchi .zip file.
 
 #### **CBHC**
 
-> - The Haxchi <a href="/files/config.txt" download>config</a>
-> - The latest release of [Homebrew Launcher Installer](https://github.com/wiiu-env/homebrew_launcher_installer/releases/latest)
->   - You will need to download the `payload.zip` file.
-> - The 1.4 release of [The Homebrew Launcher](https://github.com/dimok789/homebrew_launcher/releases/tag/1.4)
->   - You will need to download the v1.4 `homebrew_launcher.v1.4.zip` release of The Homebrew Launcher
-> - The latest release of [WUP Installer GX2](http://wiiubru.com/appstore/zips/wup_installer_gx2.zip)
-> - The latest release of [The Homebrew Launcher Channel](https://github.com/dimok789/homebrew_launcher/releases/latest)
->   - You will need to download the `channel.zip` file.
-> - The latest release of [Wii U NAND Dumper](https://github.com/koolkdev/wiiu-nanddumper/releases/latest)
-> - The latest release of the [Homebrew App Store](https://github.com/vgmoose/hbas/releases/latest)
->   - You will need to download the `wiiu-exracttosd.zip` file.
-> - The latest release of [Haxchi and CBHC](https://github.com/FIX94/haxchi/releases/latest)
->   - Download both the Haxchi and CBHC .zip files.
+- The Haxchi <a href="/files/config.txt" download>config</a>
+- The latest release of [Homebrew Launcher Installer](https://github.com/wiiu-env/homebrew_launcher_installer/releases/latest)
+  - You will need to download the `payload.zip` file.
+- The 1.4 release of [The Homebrew Launcher](https://github.com/dimok789/homebrew_launcher/releases/tag/1.4)
+  - You will need to download the v1.4 `homebrew_launcher.v1.4.zip` release of The Homebrew Launcher
+- The latest release of [WUP Installer GX2](http://wiiubru.com/appstore/zips/wup_installer_gx2.zip)
+- The latest release of [The Homebrew Launcher Channel](https://github.com/dimok789/homebrew_launcher/releases/latest)
+  - You will need to download the `channel.zip` file.
+- The latest release of [Wii U NAND Dumper](https://github.com/koolkdev/wiiu-nanddumper/releases/latest)
+- The latest release of the [Homebrew App Store](https://github.com/vgmoose/hbas/releases/latest)
+  - You will need to download the `wiiu-exracttosd.zip` file.
+- The latest release of [Haxchi and CBHC](https://github.com/FIX94/haxchi/releases/latest)
+  - Download both the Haxchi and CBHC .zip files.
 
 #### **Mocha**
 
-> - The Mocha <a href="/files/config.ini" download>config</a>
-> - The latest release of [Homebrew Launcher Installer](https://github.com/wiiu-env/homebrew_launcher_installer/releases/latest)
->   - You will need to download the `payload.zip` file.
-> - The 1.4 release of [The Homebrew Launcher](https://github.com/dimok789/homebrew_launcher/releases/tag/1.4)
->   - You will need to download the v1.4 `homebrew_launcher.v1.4.zip` release of The Homebrew Launcher
-> - The latest release of [WUP Installer GX2](http://wiiubru.com/appstore/zips/wup_installer_gx2.zip)
-> - The latest release of [Wii U NAND Dumper](https://github.com/koolkdev/wiiu-nanddumper/releases/latest)
-> - The latest release of the [Homebrew App Store](https://github.com/vgmoose/hbas/releases/latest)
->   - You will need to download the `wiiu-exracttosd.zip` file.
-> - The latest release of [Mocha](https://www.wiiubru.com/appstore/zips/mocha.zip)
+- The Mocha <a href="/files/config.ini" download>config</a>
+- The latest release of [Homebrew Launcher Installer](https://github.com/wiiu-env/homebrew_launcher_installer/releases/latest)
+  - You will need to download the `payload.zip` file.
+- The 1.4 release of [The Homebrew Launcher](https://github.com/dimok789/homebrew_launcher/releases/tag/1.4)
+  - You will need to download the v1.4 `homebrew_launcher.v1.4.zip` release of The Homebrew Launcher
+- The latest release of [WUP Installer GX2](http://wiiubru.com/appstore/zips/wup_installer_gx2.zip)
+- The latest release of [Wii U NAND Dumper](https://github.com/koolkdev/wiiu-nanddumper/releases/latest)
+- The latest release of the [Homebrew App Store](https://github.com/vgmoose/hbas/releases/latest)
+  - You will need to download the `wiiu-exracttosd.zip` file.
+- The latest release of [Mocha](https://www.wiiubru.com/appstore/zips/mocha.zip)
 
 <!-- tabs:end -->
 
@@ -65,46 +65,46 @@ We will now place the required CFW files and some additional homebrew files on t
 
 ?> **Notice**
     The info.json and manifest.install files are not needed for the modding proccess and therefore can be deleted.
-> 1. Insert your Wii U's SD card into your PC
-> 1. Extract the  `Haxchi.zip` file to the root of your SD Card
-> 1. Copy the `config.txt` file to the `haxchi` folder on your SD Card. Overwrite files if asked
-> 1. Copy the `payload.elf` from the `payload.zip` to the `wiiu` folder on your SD Card
-> 1. Extract the `wup_installer_gx2.zip` file to the root of your SD Card
-> 1. Extract the `nanddumper.zip` file to the root of your SD Card
-> 1. Extract the `wiiu-extracttosd.zip` file to the root of your SD Card
-> 1. Extract the `homebrew_launcher.v.1.4.zip` to the root of your SD Card
-> 1. Create a folder called `install` on the root of your SD Card
-> 1. Create a folder called `hbc` in the `install` folder you created
-> 1. Extract the `homebrew_launcher_channel.zip` file to the `hbc` folder you created
+1. Insert your Wii U's SD card into your PC
+1. Extract the  `Haxchi.zip` file to the root of your SD Card
+1. Copy the `config.txt` file to the `haxchi` folder on your SD Card. Overwrite files if asked
+1. Copy the `payload.elf` from the `payload.zip` to the `wiiu` folder on your SD Card
+1. Extract the `wup_installer_gx2.zip` file to the root of your SD Card
+1. Extract the `nanddumper.zip` file to the root of your SD Card
+1. Extract the `wiiu-extracttosd.zip` file to the root of your SD Card
+1. Extract the `homebrew_launcher.v.1.4.zip` to the root of your SD Card
+1. Create a folder called `install` on the root of your SD Card
+1. Create a folder called `hbc` in the `install` folder you created
+1. Extract the `homebrew_launcher_channel.zip` file to the `hbc` folder you created
 
 #### **CBHC**
 
 ?> **Notice**
     The info.json and manifest.install files are not needed for the modding proccess and therefore can be deleted.
-> 1. Insert your Wii U's SD Card into your PC
-> 1. Extract the  `Haxchi.zip` file to the root of your SD Card
-> 1. Extract the `CBHC.zip` file to the root of your SD Card
-> 1. Copy the `config.txt` file to the `haxchi` folder on your SD Card. Overwrite files if asked
-> 1. Copy the `payload.elf` from the `payload.zip` to the `wiiu` folder on your SD Card
-> 1. Extract the `wup_installer_gx2.zip` file to the root of your SD Card
-> 1. Extract the `nanddumper.zip` file to the root of your SD Card
-> 1. Extract the `wiiu-extracttosd.zip` file to the root of your SD Card
-> 1. Extract the `homebrew_launcher.v.1.4.zip` to the root of your SD Card
-> 1. Create a folder called `install` on the root of your SD Card
-> 1. Create a folder called `hbc` in the `install` folder you created
-> 1. Extract the `homebrew_launcher_channel.zip` file to the `hbc` folder you created
+1. Insert your Wii U's SD Card into your PC
+1. Extract the  `Haxchi.zip` file to the root of your SD Card
+1. Extract the `CBHC.zip` file to the root of your SD Card
+1. Copy the `config.txt` file to the `haxchi` folder on your SD Card. Overwrite files if asked
+1. Copy the `payload.elf` from the `payload.zip` to the `wiiu` folder on your SD Card
+1. Extract the `wup_installer_gx2.zip` file to the root of your SD Card
+1. Extract the `nanddumper.zip` file to the root of your SD Card
+1. Extract the `wiiu-extracttosd.zip` file to the root of your SD Card
+1. Extract the `homebrew_launcher.v.1.4.zip` to the root of your SD Card
+1. Create a folder called `install` on the root of your SD Card
+1. Create a folder called `hbc` in the `install` folder you created
+1. Extract the `homebrew_launcher_channel.zip` file to the `hbc` folder you created
 
 #### **Mocha**
 
 ?> **Notice**
     The info.json and manifest.install files are not needed for the modding proccess and therefore can be deleted.
-> 1. Insert your Wii U's SD Card into your PC
-> 1. Extract the  `mocha.zip` file to the root of your SD Card
-> 1. Copy the `config.ini` file to the `/wiiu/apps/mocha` folder on your SD Card
-> 1. Copy the `payload.elf` from the `payload.zip` to the `wiiu` folder on your SD Card
-> 1. Extract the `wup_installer_gx2.zip` file to the root of your SD Card
-> 1. Extract the `nanddumper.zip` file to the root of your SD Card
-> 1. Extract the `wiiu-extracttosd.zip` file to the root of your SD Card
-> 1. Extract the `homebrew_launcher.v.1.4.zip` to the root of your SD Card
+1. Insert your Wii U's SD Card into your PC
+1. Extract the  `mocha.zip` file to the root of your SD Card
+1. Copy the `config.ini` file to the `/wiiu/apps/mocha` folder on your SD Card
+1. Copy the `payload.elf` from the `payload.zip` to the `wiiu` folder on your SD Card
+1. Extract the `wup_installer_gx2.zip` file to the root of your SD Card
+1. Extract the `nanddumper.zip` file to the root of your SD Card
+1. Extract the `wiiu-extracttosd.zip` file to the root of your SD Card
+1. Extract the `homebrew_launcher.v.1.4.zip` to the root of your SD Card
 
 <!-- tabs:end -->

unblock-updates.md

@@ -9,24 +9,24 @@ This is needed if you ever need to perform a System Update.
 #### **Recreating the update folder**
 
 ?> In order for this method to work, your Wii U needs to be in the same network as your Computer.
-> 1. Plug your SD Card into your Computer.
-> 1. Download and extract [ftpiiu_everywhere](http://wiiubru.com/appstore/zips/fpiiu-cbhc.zip) to the root of your SD Card.
-> 1. Download an FTP client of your choice such as [FileZilla](https://filezilla-project.org/download.php).
-> 1. Plug the SD Card into your Wii U console and power it on.
-> 1. Launch the CFW of your choice (mocha, haxchi/cbhc) and enter the Homebrew Launcher.
-> 1. Navigate the Homebrew Launcher and run the ftpiiu_everywhere app.
-> 1. Take note of the IP address on the Wii U screen.
-> 1. On your PC run your preferred FTP client and open an FTP connection to your Wii U. In FileZilla this can be done using the Site Manager, but be sure to replace the IP address with the one shown on your Wii U screen:
+1. Plug your SD Card into your Computer.
+1. Download and extract [ftpiiu_everywhere](http://wiiubru.com/appstore/zips/fpiiu-cbhc.zip) to the root of your SD Card.
+1. Download an FTP client of your choice such as [FileZilla](https://filezilla-project.org/download.php).
+1. Plug the SD Card into your Wii U console and power it on.
+1. Launch the CFW of your choice (mocha, haxchi/cbhc) and enter the Homebrew Launcher.
+1. Navigate the Homebrew Launcher and run the ftpiiu_everywhere app.
+1. Take note of the IP address on the Wii U screen.
+1. On your PC run your preferred FTP client and open an FTP connection to your Wii U. In FileZilla this can be done using the Site Manager, but be sure to replace the IP address with the one shown on your Wii U screen:
 ![FileZilla](https://cdn.discordapp.com/attachments/399670410565910529/533075194546356224/1.png)
-> 1. Navigate to `/storage_mlc/sys`.
-> 1. Create a folder named `update`.
-> 1. You are now no longer blocking system updates.
+1. Navigate to `/storage_mlc/sys`.
+1. Create a folder named `update`.
+1. You are now no longer blocking system updates.
 
 ### **Removing the DNS Blocks**
 
-> 1. Enter the Wii U's system settings and navigate to `Internet > Connect to the Internet > Connection List >`
-> `Your WiFi connection > Change Settings > DNS` and set the option to `Auto-obtain`.
-> 1. You are now no longer blocking system updates.
+1. Enter the Wii U's system settings and navigate to `Internet > Connect to the Internet > Connection List >`
+`Your WiFi connection > Change Settings > DNS` and set the option to `Auto-obtain`.
+1. You are now no longer blocking system updates.
 
 
 <!-- tabs:end -->