Capitalized all the titles

pull/4/head
Elpunical 5 years ago
parent 40ba1f7c38
commit d99142b603

@ -7,7 +7,7 @@ All currently known Wii U exploits can, unlike e.g. the Nintendo Switch RCM expl
Currently two ways exist to block updates on the Wii U system:
<!-- tabs:start -->
#### **Deleting the update folder**
#### **Deleting The Update Folder**
?> While this method of update blocking is a bit more advanced than DNS Blocking and currently requires at least basic knowledge on FTP Programs, it has the advantage that the eShop's functionality will not be restricted.
?> In order for this method to work, your Wii U needs to be in the same network as your Computer.

@ -8,11 +8,11 @@ Dumping your Discs allows you to install a copy of your game to the system NAND/
<!-- tabs:start -->
#### **Install to NAND**
#### **Install To NAND**
?> Installing a game to the system memory (NAND) is not recommended as it's limited to either 8 or 32gb depending on your model, making you run out of space pretty quickly if you want to install multiple games.
### What you need
### What You need
- Your SD Card needs to have enough space to fit the game you want to dump.
- The [disc2app](http://www.wiiubru.com/appstore/zips/disc2app.zip) Homebrew app
@ -34,13 +34,13 @@ Dumping your Discs allows you to install a copy of your game to the system NAND/
1. Take the SD Card out of your Wii U and plug it into your PC.
1. Delete the `WUP-X-XXXX` folder in the `install` directory on your SD Card to free up space.
#### **Install to USB**
#### **Install To USB**
?> When installing a game to an USB device, we recommend that you use an HDD and not a flash drive, as those are not optimized for constant reading and writing, therefore making them fail quickly. If your HDD is not externally powered, you will need an Y-cable to connect it to two USB slots on the Wii U.
!> In order to install to an USB device, it has to be formatted by the Wii U. Doing this will erase all contents of it, and prevent it from being used on another system unless you re-format it.
### What you need
### What You Need
- Your SD Card needs to have enough space to fit the game you want to dump.
- An USB HDD (+ a Y-cable if needed)
- The [disc2app](http://www.wiiubru.com/appstore/zips/disc2app.zip) Homebrew app
@ -65,7 +65,7 @@ Dumping your Discs allows you to install a copy of your game to the system NAND/
1. Take the SD Card out of your Wii U and plug it into your PC.
1. Delete the `WUP-X-XXXX` folder in the `install` directory on your SD Card to free up space.
### Move updates/DLC to USB
### Move Updates/DLC To USB
?> If your disc game had DLC or updates installed, you will need to transfer the files over to your USB device. You can do this using the Wii U's data management.
@ -74,11 +74,11 @@ Dumping your Discs allows you to install a copy of your game to the system NAND/
1. Navigate to `Data Management > Copy/Move/Delete Data > System Memory > Move Items (X)`.
1. Select your game and move the update and DLC data to the USB device.
#### **Install from USB**
#### **Install From USB**
?> If you do not have enough space on your SD Card, you can use an advanced technique to install dumps from an USB device. This is not the easiest thing to do, and has the disadvantage of only being able to install the game onto your system memory (NAND).
### What you need
### What You Need
- An USB storage device (+a Y-cable if needed) with enough space to fit the game you want to dump.
- The [disc2app](http://www.wiiubru.com/appstore/zips/disc2app.zip) Homebrew app.
- The [MochaFAT32](https://www.wiiubru.com/appstore/zips/mocha_fat32.zip) Homebrew app.
@ -117,7 +117,7 @@ Dumping your Discs allows you to install a copy of your game to the system NAND/
1. Take the USB device out of your Wii U and plug it into your PC.
2. Delete the `WUP-X-XXXX` folder in the `install` directory on your USB device to free up space.
### Moving the game to USB
### Moving The Game To USB
?> If you don't want to keep the game installed on NAND, you can use the Wii U's data management to move the game to an USB device.

@ -29,7 +29,7 @@ For live support with this guide please visit us in **#wiiu-assistance** on the
> This guide has the end goal of taking a completely unmodified Wii U from Stock to Custom Firmware.
### Before starting
### Before Starting
!> Before beginning the guide, you must know the risks of Wii U hacking: EVERY time you modify your system, there is always the potential for an UNRECOVERABLE brick. Theyre rare but still a possibility so make sure you follow ALL directions EXACTLY.
>

@ -1,4 +1,4 @@
# IOS folders and paths
# IOS Folders and Paths
?> This page is primarily meant to be used with [Recover a Corrupted IOS](recover-ios)

@ -1,10 +1,10 @@
# Recover a corrupted or lost IOS
# Recover a Corrupted IOS
This page will guide you through the process of recovering a corrupted IOS on your vWii.
!> Do not use this method for anything else than [recovering your Mii Channel](recover-mii-channel) or the following page.
### What you need
### What You Need
> - A working [Homebrew installation](introduction) on Wii U side
> - This release of [FTPiiU Everywhere](http://wiiubru.com/appstore/#/app/fpiiu-cbhc)
@ -20,7 +20,7 @@ This page will guide you through the process of recovering a corrupted IOS on yo
<!-- tabs:start -->
### **Recover a corrupted IOS 80**
### **IOS 80**
!> If you are using a system update blocking method, please [remove it](unblock-updates).
@ -42,7 +42,7 @@ This page will guide you through the process of recovering a corrupted IOS on yo
?> You can now re-enable your [system update blocking method](block-updates).
### **Recover any corrupted IOS**
### **Any IOS**
!> **Do not** attempt to delete multiple IOSes at a time.

@ -1,8 +1,8 @@
# Recover your lost or corrupted Mii Channel
# Recover Your Lost or Corrupted Mii Channel
This page will guide you through the process of restoring your Mii Channel to a working state.
### What you need
### What You Need
> - A working [Homebrew installation](introduction) on Wii U side
> - This release of [FTPiiU Everywhere](http://wiiubru.com/appstore/#/app/fpiiu-cbhc)
@ -16,7 +16,7 @@ This page will guide you through the process of restoring your Mii Channel to a
> 1. Install FileZilla on your computer
> 1. Install Python on your computer
### Recovering the channel
### Recovering The Channel
!> If you are using a system update blocking method, please [remove it](unblock-updates).

@ -5,7 +5,7 @@ We will now place the required CFW files and some additional homebrew files on t
?> **Notice**
Your SD Card will need to be formatted as FAT32. If your SD Card is not formatted to FAT32, use [GUIFormat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) with 32k (32768) Allocation unit size to format it.
### What you need
### What You Need
<!-- tabs:start -->

@ -6,7 +6,7 @@ This is needed if you ever need to perform a System Update.
<!-- tabs:start -->
#### **Recreating the update folder**
#### **Recreating The Update Folder**
?> In order for this method to work, your Wii U needs to be in the same network as your Computer.
1. Plug your SD Card into your Computer.
@ -22,7 +22,7 @@ This is needed if you ever need to perform a System Update.
1. Create a folder named `update`.
1. You are now no longer blocking system updates.
### **Removing the DNS Blocks**
### **Removing The DNS Blocks**
1. Enter the Wii U's system settings and navigate to `Internet > Connect to the Internet > Connection List >`
`Your WiFi connection > Change Settings > DNS` and set the option to `Auto-obtain`.

@ -7,7 +7,7 @@ We will now place the required Homebrew files on the SD Card.
?> **Notice**
Your SD Card will need to be formatted as FAT32. If your SD Card is not formatted to FAT32, use [GUIFormat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) with 32k (32768) Allocation unit size to format it.
### What you need
### What You Need
> - The <a href ="/files/vWii_cIOS_apps_20131218.zip" download>vWii cIOS apps</a>
> - The <a href="/files/Patched_IOS80_Installer_for_vWii.zip" download>Patched IOS 80 Installer for vWii</a>

Loading…
Cancel
Save