diff --git a/translations/ar_SA/docs/extras/block-updates.md b/translations/ar_SA/docs/extras/block-updates.md index 138f56793..6d1a63a79 100644 --- a/translations/ar_SA/docs/extras/block-updates.md +++ b/translations/ar_SA/docs/extras/block-updates.md @@ -30,8 +30,8 @@ Currently, two ways exist to block updates on the Wii U system: 1. Plug the SD Card into your Wii U console and power it on. 1. Enter the Wii U's system settings and navigate to `Internet > Connect to the Internet > Connection List >` `Your WiFi connection > Change Settings > DNS` and set the option to `Do not auto-obtain`. 1. You will be asked to input a primary and secondary DNS. Enter the following IP addresses: - - Primary DNS: 168.235.092.108 - - Secondary DNS: 081.004.127.020 DNS Block + - Primary DNS: 168.235.092.108 + - Secondary DNS: 081.004.127.020 DNS Block 1. Click on confirm. 1. You are now blocking updates. In order to access the eShop, run the NNUPatcher app from the Homebrew Launcher before launching the eShop. diff --git a/translations/ar_SA/docs/extras/configurable-payload.md b/translations/ar_SA/docs/extras/configurable-payload.md index 68e33baea..3068e9e1c 100644 --- a/translations/ar_SA/docs/extras/configurable-payload.md +++ b/translations/ar_SA/docs/extras/configurable-payload.md @@ -19,4 +19,4 @@ This payload is configurable, similar to Haxchi's configuration. This could be v 1. Extract the `Configurable_Payload.zip` file to the root of your SD Card. If it prompts you to overwrite the files on your SD Card, do so. 1. Place the SD Card into your Wii U and launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. If everything has been done correctly, you should be taken back to the Wii U Menu. Mocha has now been enabled and you can use the Homebrew Launcher Channel you installed earlier. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. diff --git a/translations/ar_SA/docs/extras/dump-games.md b/translations/ar_SA/docs/extras/dump-games.md index 63c7044ae..d7b48a17a 100644 --- a/translations/ar_SA/docs/extras/dump-games.md +++ b/translations/ar_SA/docs/extras/dump-games.md @@ -103,11 +103,11 @@ Dumping your Discs allows you to install a copy of your game to the system NAND/ 1. Plug in your USB device. The Wii U will ask you format it. Cancel with No! 1. Launch the Homebrew Launcher and start the MochaFAT32 app. 1. In the configuration menu, set the following settings: - - Config view mode: default - - Skip this menu on launch: on - - Don't relaunch OS: off - - Launch System Menu: on - - RedNAND: off + - Config view mode: default + - Skip this menu on launch: on + - Don't relaunch OS: off + - Launch System Menu: on + - RedNAND: off 1. Your console will load the Wii U menu with your USB device now replacing the SD Card. 1. Launch the Homebrew Launcher and open the disc2app app. 1. Eject any inserted game disc and press the A button to begin the dumping process. diff --git a/translations/ar_SA/docs/extras/dump-wii-games.md b/translations/ar_SA/docs/extras/dump-wii-games.md index db3692a09..1d98d4209 100644 --- a/translations/ar_SA/docs/extras/dump-wii-games.md +++ b/translations/ar_SA/docs/extras/dump-wii-games.md @@ -24,15 +24,15 @@ Dumping your Discs allows you to: play them on a Wii emulator (namely Dolphin), 1. Read the Disclaimer then press A. 1. Select Yes to enable Checksum Calculations. 1. Select either USB or Front SD depending on which device you want to use for the dumping process. - - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. + - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. 1. Press A to continue. 1. Select No on the screen that asks you to download redump.org DAT files. 1. Insert your disc then press A. 1. Go [on this page](https://wiki.dolphin-emu.org/index.php?title=Category:Dual_Layer_Disc_games) to see if your disc is dual-layered. 1. Set everything to match the following: - - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) - - Chunk Size: `Max` - - New device per chunk: `No` + - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) + - Chunk Size: `Max` + - New device per chunk: `No` 1. If you want to dump multiple discs, select Yes to remember your settings. If not, select No. ?> Be prepared to wait a while. The dumping process can take 30 minutes to 1 hour depending on your SD Card's speeds. diff --git a/translations/ar_SA/docs/troubleshooting/fix-errcode-112-1037.md b/translations/ar_SA/docs/troubleshooting/fix-errcode-112-1037.md index 98b8f454c..bce0e7fae 100644 --- a/translations/ar_SA/docs/troubleshooting/fix-errcode-112-1037.md +++ b/translations/ar_SA/docs/troubleshooting/fix-errcode-112-1037.md @@ -25,14 +25,14 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a command prompt window. 1. Use the following command: `cd `. - - Example: cd C:\Users\username\Downloads. + - Example: cd C:\Users\username\Downloads. 1. Use the following command: `py -3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. @@ -45,15 +45,15 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a Terminal window. 1. Use the following command: `cd `. - - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. - - On Linux, the most common place to find your downloaded files is /home/username/Downloads. + - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. + - On Linux, the most common place to find your downloaded files is /home/username/Downloads. 1. Use the following command: `python3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. diff --git a/translations/ar_SA/docs/user-guide/cbhc/browser-exploit.md b/translations/ar_SA/docs/user-guide/cbhc/browser-exploit.md index 6e1553c47..aa6e836d9 100644 --- a/translations/ar_SA/docs/user-guide/cbhc/browser-exploit.md +++ b/translations/ar_SA/docs/user-guide/cbhc/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/ar_SA/docs/user-guide/cbhc/nand-backup.md b/translations/ar_SA/docs/user-guide/cbhc/nand-backup.md index e24bdaf1b..e324b7a81 100644 --- a/translations/ar_SA/docs/user-guide/cbhc/nand-backup.md +++ b/translations/ar_SA/docs/user-guide/cbhc/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/ar_SA/docs/user-guide/haxchi/browser-exploit.md b/translations/ar_SA/docs/user-guide/haxchi/browser-exploit.md index 826e038f3..8853ba483 100644 --- a/translations/ar_SA/docs/user-guide/haxchi/browser-exploit.md +++ b/translations/ar_SA/docs/user-guide/haxchi/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/ar_SA/docs/user-guide/haxchi/nand-backup.md b/translations/ar_SA/docs/user-guide/haxchi/nand-backup.md index 75200207a..9d6d642ad 100644 --- a/translations/ar_SA/docs/user-guide/haxchi/nand-backup.md +++ b/translations/ar_SA/docs/user-guide/haxchi/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/ar_SA/docs/user-guide/mocha/indexiine/browser-exploit.md b/translations/ar_SA/docs/user-guide/mocha/indexiine/browser-exploit.md index 83505773d..c14364eb9 100644 --- a/translations/ar_SA/docs/user-guide/mocha/indexiine/browser-exploit.md +++ b/translations/ar_SA/docs/user-guide/mocha/indexiine/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/ar_SA/docs/user-guide/mocha/indexiine/browser-modding.md b/translations/ar_SA/docs/user-guide/mocha/indexiine/browser-modding.md index 2aa249f4c..2bdfe4a37 100644 --- a/translations/ar_SA/docs/user-guide/mocha/indexiine/browser-modding.md +++ b/translations/ar_SA/docs/user-guide/mocha/indexiine/browser-modding.md @@ -12,7 +12,7 @@ Now that you have your NAND backup in case anything goes wrong later, you can in 1. Turn on your Wii U. 1. Launch the internet browser and open the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. 1. Navigate through the Homebrew Launcher and launch the `Indexiine Installer` app. 1. Press the A button to install Indexiine. 1. When the process completed, close the Homebrew Launcher to get back to your Wii U menu. diff --git a/translations/ar_SA/docs/user-guide/mocha/indexiine/nand-backup.md b/translations/ar_SA/docs/user-guide/mocha/indexiine/nand-backup.md index b0809c71c..88814cff8 100644 --- a/translations/ar_SA/docs/user-guide/mocha/indexiine/nand-backup.md +++ b/translations/ar_SA/docs/user-guide/mocha/indexiine/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/ar_SA/docs/user-guide/mocha/online-exploit/browser-exploit.md b/translations/ar_SA/docs/user-guide/mocha/online-exploit/browser-exploit.md index 8cbf2c754..30b7c94c5 100644 --- a/translations/ar_SA/docs/user-guide/mocha/online-exploit/browser-exploit.md +++ b/translations/ar_SA/docs/user-guide/mocha/online-exploit/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/ar_SA/docs/user-guide/mocha/online-exploit/nand-backup.md b/translations/ar_SA/docs/user-guide/mocha/online-exploit/nand-backup.md index 6513b4f51..adcbfaf3a 100644 --- a/translations/ar_SA/docs/user-guide/mocha/online-exploit/nand-backup.md +++ b/translations/ar_SA/docs/user-guide/mocha/online-exploit/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/ar_SA/docs/vwii/vwii-modding.md b/translations/ar_SA/docs/vwii/vwii-modding.md index c301b7b7f..64bdca1af 100644 --- a/translations/ar_SA/docs/vwii/vwii-modding.md +++ b/translations/ar_SA/docs/vwii/vwii-modding.md @@ -35,11 +35,11 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch the `Wii U NAND Dumper` application. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **optional** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **optional** + - Dump SLC: **optional** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **optional** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slccmpt.bin`, `otp.bin` and if you chose to go with a full backup, `seeprom.bin`, `slc.bin`, and `every mlc.bin.part` file to your computer. @@ -51,10 +51,10 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `A` to backup the Mii Channel and inject the Hackmii Installer then wait until it says Successfully injected wuphax!. - - You will be taken back to the Wii U Menu after a few seconds. + - You will be taken back to the Wii U Menu after a few seconds. 1. Launch vWii (the Wii Menu icon). 1. Launch the vWii Mii Channel. - - If Wuphax has successfully been injected, you will now see the scam warning screen. + - If Wuphax has successfully been injected, you will now see the scam warning screen. 1. Wait until you see `Press 1 to continue` and then press the `1` button. 1. Select `continue`, Install The Homebrew Channel and `Yes, continue`. 1. If The Homebrew Channel has successfully been installed, select `continue` and then `exit`. @@ -62,8 +62,8 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `B` to restore the Mii Channel then wait until it says Mii Channel restored!. - - You will be taken back to the Wii U Menu after a few seconds. - - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). + - You will be taken back to the Wii U Menu after a few seconds. + - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). ### Installing cIOSes @@ -75,19 +75,19 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch The Homebrew Channel. 1. Launch d2x cIOS Installer. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `56` - - Select cIOS slot: `249` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `56` + - Select cIOS slot: `249` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `57` - - Select cIOS slot: `250` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `57` + - Select cIOS slot: `250` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `58` - - Select cIOS slot: `251` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `58` + - Select cIOS slot: `251` 1. Press the `A` button to install. 1. Press the `B` button to exit. diff --git a/translations/ca_ES/docs/extras/block-updates.md b/translations/ca_ES/docs/extras/block-updates.md index 138f56793..6d1a63a79 100644 --- a/translations/ca_ES/docs/extras/block-updates.md +++ b/translations/ca_ES/docs/extras/block-updates.md @@ -30,8 +30,8 @@ Currently, two ways exist to block updates on the Wii U system: 1. Plug the SD Card into your Wii U console and power it on. 1. Enter the Wii U's system settings and navigate to `Internet > Connect to the Internet > Connection List >` `Your WiFi connection > Change Settings > DNS` and set the option to `Do not auto-obtain`. 1. You will be asked to input a primary and secondary DNS. Enter the following IP addresses: - - Primary DNS: 168.235.092.108 - - Secondary DNS: 081.004.127.020 DNS Block + - Primary DNS: 168.235.092.108 + - Secondary DNS: 081.004.127.020 DNS Block 1. Click on confirm. 1. You are now blocking updates. In order to access the eShop, run the NNUPatcher app from the Homebrew Launcher before launching the eShop. diff --git a/translations/ca_ES/docs/extras/configurable-payload.md b/translations/ca_ES/docs/extras/configurable-payload.md index 68e33baea..3068e9e1c 100644 --- a/translations/ca_ES/docs/extras/configurable-payload.md +++ b/translations/ca_ES/docs/extras/configurable-payload.md @@ -19,4 +19,4 @@ This payload is configurable, similar to Haxchi's configuration. This could be v 1. Extract the `Configurable_Payload.zip` file to the root of your SD Card. If it prompts you to overwrite the files on your SD Card, do so. 1. Place the SD Card into your Wii U and launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. If everything has been done correctly, you should be taken back to the Wii U Menu. Mocha has now been enabled and you can use the Homebrew Launcher Channel you installed earlier. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. diff --git a/translations/ca_ES/docs/extras/dump-games.md b/translations/ca_ES/docs/extras/dump-games.md index 63c7044ae..d7b48a17a 100644 --- a/translations/ca_ES/docs/extras/dump-games.md +++ b/translations/ca_ES/docs/extras/dump-games.md @@ -103,11 +103,11 @@ Dumping your Discs allows you to install a copy of your game to the system NAND/ 1. Plug in your USB device. The Wii U will ask you format it. Cancel with No! 1. Launch the Homebrew Launcher and start the MochaFAT32 app. 1. In the configuration menu, set the following settings: - - Config view mode: default - - Skip this menu on launch: on - - Don't relaunch OS: off - - Launch System Menu: on - - RedNAND: off + - Config view mode: default + - Skip this menu on launch: on + - Don't relaunch OS: off + - Launch System Menu: on + - RedNAND: off 1. Your console will load the Wii U menu with your USB device now replacing the SD Card. 1. Launch the Homebrew Launcher and open the disc2app app. 1. Eject any inserted game disc and press the A button to begin the dumping process. diff --git a/translations/ca_ES/docs/extras/dump-wii-games.md b/translations/ca_ES/docs/extras/dump-wii-games.md index db3692a09..1d98d4209 100644 --- a/translations/ca_ES/docs/extras/dump-wii-games.md +++ b/translations/ca_ES/docs/extras/dump-wii-games.md @@ -24,15 +24,15 @@ Dumping your Discs allows you to: play them on a Wii emulator (namely Dolphin), 1. Read the Disclaimer then press A. 1. Select Yes to enable Checksum Calculations. 1. Select either USB or Front SD depending on which device you want to use for the dumping process. - - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. + - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. 1. Press A to continue. 1. Select No on the screen that asks you to download redump.org DAT files. 1. Insert your disc then press A. 1. Go [on this page](https://wiki.dolphin-emu.org/index.php?title=Category:Dual_Layer_Disc_games) to see if your disc is dual-layered. 1. Set everything to match the following: - - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) - - Chunk Size: `Max` - - New device per chunk: `No` + - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) + - Chunk Size: `Max` + - New device per chunk: `No` 1. If you want to dump multiple discs, select Yes to remember your settings. If not, select No. ?> Be prepared to wait a while. The dumping process can take 30 minutes to 1 hour depending on your SD Card's speeds. diff --git a/translations/ca_ES/docs/troubleshooting/fix-errcode-112-1037.md b/translations/ca_ES/docs/troubleshooting/fix-errcode-112-1037.md index 98b8f454c..bce0e7fae 100644 --- a/translations/ca_ES/docs/troubleshooting/fix-errcode-112-1037.md +++ b/translations/ca_ES/docs/troubleshooting/fix-errcode-112-1037.md @@ -25,14 +25,14 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a command prompt window. 1. Use the following command: `cd `. - - Example: cd C:\Users\username\Downloads. + - Example: cd C:\Users\username\Downloads. 1. Use the following command: `py -3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. @@ -45,15 +45,15 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a Terminal window. 1. Use the following command: `cd `. - - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. - - On Linux, the most common place to find your downloaded files is /home/username/Downloads. + - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. + - On Linux, the most common place to find your downloaded files is /home/username/Downloads. 1. Use the following command: `python3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. diff --git a/translations/ca_ES/docs/user-guide/cbhc/browser-exploit.md b/translations/ca_ES/docs/user-guide/cbhc/browser-exploit.md index 6e1553c47..aa6e836d9 100644 --- a/translations/ca_ES/docs/user-guide/cbhc/browser-exploit.md +++ b/translations/ca_ES/docs/user-guide/cbhc/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/ca_ES/docs/user-guide/cbhc/nand-backup.md b/translations/ca_ES/docs/user-guide/cbhc/nand-backup.md index e24bdaf1b..e324b7a81 100644 --- a/translations/ca_ES/docs/user-guide/cbhc/nand-backup.md +++ b/translations/ca_ES/docs/user-guide/cbhc/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/ca_ES/docs/user-guide/haxchi/browser-exploit.md b/translations/ca_ES/docs/user-guide/haxchi/browser-exploit.md index 826e038f3..8853ba483 100644 --- a/translations/ca_ES/docs/user-guide/haxchi/browser-exploit.md +++ b/translations/ca_ES/docs/user-guide/haxchi/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/ca_ES/docs/user-guide/haxchi/nand-backup.md b/translations/ca_ES/docs/user-guide/haxchi/nand-backup.md index 75200207a..9d6d642ad 100644 --- a/translations/ca_ES/docs/user-guide/haxchi/nand-backup.md +++ b/translations/ca_ES/docs/user-guide/haxchi/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/ca_ES/docs/user-guide/mocha/indexiine/browser-exploit.md b/translations/ca_ES/docs/user-guide/mocha/indexiine/browser-exploit.md index 83505773d..c14364eb9 100644 --- a/translations/ca_ES/docs/user-guide/mocha/indexiine/browser-exploit.md +++ b/translations/ca_ES/docs/user-guide/mocha/indexiine/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/ca_ES/docs/user-guide/mocha/indexiine/browser-modding.md b/translations/ca_ES/docs/user-guide/mocha/indexiine/browser-modding.md index 2aa249f4c..2bdfe4a37 100644 --- a/translations/ca_ES/docs/user-guide/mocha/indexiine/browser-modding.md +++ b/translations/ca_ES/docs/user-guide/mocha/indexiine/browser-modding.md @@ -12,7 +12,7 @@ Now that you have your NAND backup in case anything goes wrong later, you can in 1. Turn on your Wii U. 1. Launch the internet browser and open the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. 1. Navigate through the Homebrew Launcher and launch the `Indexiine Installer` app. 1. Press the A button to install Indexiine. 1. When the process completed, close the Homebrew Launcher to get back to your Wii U menu. diff --git a/translations/ca_ES/docs/user-guide/mocha/indexiine/nand-backup.md b/translations/ca_ES/docs/user-guide/mocha/indexiine/nand-backup.md index b0809c71c..88814cff8 100644 --- a/translations/ca_ES/docs/user-guide/mocha/indexiine/nand-backup.md +++ b/translations/ca_ES/docs/user-guide/mocha/indexiine/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/ca_ES/docs/user-guide/mocha/online-exploit/browser-exploit.md b/translations/ca_ES/docs/user-guide/mocha/online-exploit/browser-exploit.md index 8cbf2c754..30b7c94c5 100644 --- a/translations/ca_ES/docs/user-guide/mocha/online-exploit/browser-exploit.md +++ b/translations/ca_ES/docs/user-guide/mocha/online-exploit/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/ca_ES/docs/user-guide/mocha/online-exploit/nand-backup.md b/translations/ca_ES/docs/user-guide/mocha/online-exploit/nand-backup.md index 6513b4f51..adcbfaf3a 100644 --- a/translations/ca_ES/docs/user-guide/mocha/online-exploit/nand-backup.md +++ b/translations/ca_ES/docs/user-guide/mocha/online-exploit/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/ca_ES/docs/vwii/vwii-modding.md b/translations/ca_ES/docs/vwii/vwii-modding.md index c301b7b7f..64bdca1af 100644 --- a/translations/ca_ES/docs/vwii/vwii-modding.md +++ b/translations/ca_ES/docs/vwii/vwii-modding.md @@ -35,11 +35,11 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch the `Wii U NAND Dumper` application. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **optional** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **optional** + - Dump SLC: **optional** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **optional** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slccmpt.bin`, `otp.bin` and if you chose to go with a full backup, `seeprom.bin`, `slc.bin`, and `every mlc.bin.part` file to your computer. @@ -51,10 +51,10 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `A` to backup the Mii Channel and inject the Hackmii Installer then wait until it says Successfully injected wuphax!. - - You will be taken back to the Wii U Menu after a few seconds. + - You will be taken back to the Wii U Menu after a few seconds. 1. Launch vWii (the Wii Menu icon). 1. Launch the vWii Mii Channel. - - If Wuphax has successfully been injected, you will now see the scam warning screen. + - If Wuphax has successfully been injected, you will now see the scam warning screen. 1. Wait until you see `Press 1 to continue` and then press the `1` button. 1. Select `continue`, Install The Homebrew Channel and `Yes, continue`. 1. If The Homebrew Channel has successfully been installed, select `continue` and then `exit`. @@ -62,8 +62,8 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `B` to restore the Mii Channel then wait until it says Mii Channel restored!. - - You will be taken back to the Wii U Menu after a few seconds. - - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). + - You will be taken back to the Wii U Menu after a few seconds. + - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). ### Installing cIOSes @@ -75,19 +75,19 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch The Homebrew Channel. 1. Launch d2x cIOS Installer. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `56` - - Select cIOS slot: `249` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `56` + - Select cIOS slot: `249` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `57` - - Select cIOS slot: `250` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `57` + - Select cIOS slot: `250` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `58` - - Select cIOS slot: `251` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `58` + - Select cIOS slot: `251` 1. Press the `A` button to install. 1. Press the `B` button to exit. diff --git a/translations/cs_CZ/docs/extras/block-updates.md b/translations/cs_CZ/docs/extras/block-updates.md index 138f56793..6d1a63a79 100644 --- a/translations/cs_CZ/docs/extras/block-updates.md +++ b/translations/cs_CZ/docs/extras/block-updates.md @@ -30,8 +30,8 @@ Currently, two ways exist to block updates on the Wii U system: 1. Plug the SD Card into your Wii U console and power it on. 1. Enter the Wii U's system settings and navigate to `Internet > Connect to the Internet > Connection List >` `Your WiFi connection > Change Settings > DNS` and set the option to `Do not auto-obtain`. 1. You will be asked to input a primary and secondary DNS. Enter the following IP addresses: - - Primary DNS: 168.235.092.108 - - Secondary DNS: 081.004.127.020 DNS Block + - Primary DNS: 168.235.092.108 + - Secondary DNS: 081.004.127.020 DNS Block 1. Click on confirm. 1. You are now blocking updates. In order to access the eShop, run the NNUPatcher app from the Homebrew Launcher before launching the eShop. diff --git a/translations/cs_CZ/docs/extras/configurable-payload.md b/translations/cs_CZ/docs/extras/configurable-payload.md index 68e33baea..3068e9e1c 100644 --- a/translations/cs_CZ/docs/extras/configurable-payload.md +++ b/translations/cs_CZ/docs/extras/configurable-payload.md @@ -19,4 +19,4 @@ This payload is configurable, similar to Haxchi's configuration. This could be v 1. Extract the `Configurable_Payload.zip` file to the root of your SD Card. If it prompts you to overwrite the files on your SD Card, do so. 1. Place the SD Card into your Wii U and launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. If everything has been done correctly, you should be taken back to the Wii U Menu. Mocha has now been enabled and you can use the Homebrew Launcher Channel you installed earlier. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. diff --git a/translations/cs_CZ/docs/extras/dump-games.md b/translations/cs_CZ/docs/extras/dump-games.md index 63c7044ae..d7b48a17a 100644 --- a/translations/cs_CZ/docs/extras/dump-games.md +++ b/translations/cs_CZ/docs/extras/dump-games.md @@ -103,11 +103,11 @@ Dumping your Discs allows you to install a copy of your game to the system NAND/ 1. Plug in your USB device. The Wii U will ask you format it. Cancel with No! 1. Launch the Homebrew Launcher and start the MochaFAT32 app. 1. In the configuration menu, set the following settings: - - Config view mode: default - - Skip this menu on launch: on - - Don't relaunch OS: off - - Launch System Menu: on - - RedNAND: off + - Config view mode: default + - Skip this menu on launch: on + - Don't relaunch OS: off + - Launch System Menu: on + - RedNAND: off 1. Your console will load the Wii U menu with your USB device now replacing the SD Card. 1. Launch the Homebrew Launcher and open the disc2app app. 1. Eject any inserted game disc and press the A button to begin the dumping process. diff --git a/translations/cs_CZ/docs/extras/dump-wii-games.md b/translations/cs_CZ/docs/extras/dump-wii-games.md index db3692a09..1d98d4209 100644 --- a/translations/cs_CZ/docs/extras/dump-wii-games.md +++ b/translations/cs_CZ/docs/extras/dump-wii-games.md @@ -24,15 +24,15 @@ Dumping your Discs allows you to: play them on a Wii emulator (namely Dolphin), 1. Read the Disclaimer then press A. 1. Select Yes to enable Checksum Calculations. 1. Select either USB or Front SD depending on which device you want to use for the dumping process. - - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. + - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. 1. Press A to continue. 1. Select No on the screen that asks you to download redump.org DAT files. 1. Insert your disc then press A. 1. Go [on this page](https://wiki.dolphin-emu.org/index.php?title=Category:Dual_Layer_Disc_games) to see if your disc is dual-layered. 1. Set everything to match the following: - - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) - - Chunk Size: `Max` - - New device per chunk: `No` + - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) + - Chunk Size: `Max` + - New device per chunk: `No` 1. If you want to dump multiple discs, select Yes to remember your settings. If not, select No. ?> Be prepared to wait a while. The dumping process can take 30 minutes to 1 hour depending on your SD Card's speeds. diff --git a/translations/cs_CZ/docs/troubleshooting/fix-errcode-112-1037.md b/translations/cs_CZ/docs/troubleshooting/fix-errcode-112-1037.md index 98b8f454c..bce0e7fae 100644 --- a/translations/cs_CZ/docs/troubleshooting/fix-errcode-112-1037.md +++ b/translations/cs_CZ/docs/troubleshooting/fix-errcode-112-1037.md @@ -25,14 +25,14 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a command prompt window. 1. Use the following command: `cd `. - - Example: cd C:\Users\username\Downloads. + - Example: cd C:\Users\username\Downloads. 1. Use the following command: `py -3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. @@ -45,15 +45,15 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a Terminal window. 1. Use the following command: `cd `. - - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. - - On Linux, the most common place to find your downloaded files is /home/username/Downloads. + - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. + - On Linux, the most common place to find your downloaded files is /home/username/Downloads. 1. Use the following command: `python3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. diff --git a/translations/cs_CZ/docs/user-guide/cbhc/browser-exploit.md b/translations/cs_CZ/docs/user-guide/cbhc/browser-exploit.md index 6e1553c47..aa6e836d9 100644 --- a/translations/cs_CZ/docs/user-guide/cbhc/browser-exploit.md +++ b/translations/cs_CZ/docs/user-guide/cbhc/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/cs_CZ/docs/user-guide/cbhc/nand-backup.md b/translations/cs_CZ/docs/user-guide/cbhc/nand-backup.md index e24bdaf1b..e324b7a81 100644 --- a/translations/cs_CZ/docs/user-guide/cbhc/nand-backup.md +++ b/translations/cs_CZ/docs/user-guide/cbhc/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/cs_CZ/docs/user-guide/haxchi/browser-exploit.md b/translations/cs_CZ/docs/user-guide/haxchi/browser-exploit.md index 826e038f3..8853ba483 100644 --- a/translations/cs_CZ/docs/user-guide/haxchi/browser-exploit.md +++ b/translations/cs_CZ/docs/user-guide/haxchi/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/cs_CZ/docs/user-guide/haxchi/nand-backup.md b/translations/cs_CZ/docs/user-guide/haxchi/nand-backup.md index 75200207a..9d6d642ad 100644 --- a/translations/cs_CZ/docs/user-guide/haxchi/nand-backup.md +++ b/translations/cs_CZ/docs/user-guide/haxchi/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/cs_CZ/docs/user-guide/mocha/indexiine/browser-exploit.md b/translations/cs_CZ/docs/user-guide/mocha/indexiine/browser-exploit.md index 83505773d..c14364eb9 100644 --- a/translations/cs_CZ/docs/user-guide/mocha/indexiine/browser-exploit.md +++ b/translations/cs_CZ/docs/user-guide/mocha/indexiine/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/cs_CZ/docs/user-guide/mocha/indexiine/browser-modding.md b/translations/cs_CZ/docs/user-guide/mocha/indexiine/browser-modding.md index 2aa249f4c..2bdfe4a37 100644 --- a/translations/cs_CZ/docs/user-guide/mocha/indexiine/browser-modding.md +++ b/translations/cs_CZ/docs/user-guide/mocha/indexiine/browser-modding.md @@ -12,7 +12,7 @@ Now that you have your NAND backup in case anything goes wrong later, you can in 1. Turn on your Wii U. 1. Launch the internet browser and open the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. 1. Navigate through the Homebrew Launcher and launch the `Indexiine Installer` app. 1. Press the A button to install Indexiine. 1. When the process completed, close the Homebrew Launcher to get back to your Wii U menu. diff --git a/translations/cs_CZ/docs/user-guide/mocha/indexiine/nand-backup.md b/translations/cs_CZ/docs/user-guide/mocha/indexiine/nand-backup.md index b0809c71c..88814cff8 100644 --- a/translations/cs_CZ/docs/user-guide/mocha/indexiine/nand-backup.md +++ b/translations/cs_CZ/docs/user-guide/mocha/indexiine/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/cs_CZ/docs/user-guide/mocha/online-exploit/browser-exploit.md b/translations/cs_CZ/docs/user-guide/mocha/online-exploit/browser-exploit.md index 8cbf2c754..30b7c94c5 100644 --- a/translations/cs_CZ/docs/user-guide/mocha/online-exploit/browser-exploit.md +++ b/translations/cs_CZ/docs/user-guide/mocha/online-exploit/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/cs_CZ/docs/user-guide/mocha/online-exploit/nand-backup.md b/translations/cs_CZ/docs/user-guide/mocha/online-exploit/nand-backup.md index 6513b4f51..adcbfaf3a 100644 --- a/translations/cs_CZ/docs/user-guide/mocha/online-exploit/nand-backup.md +++ b/translations/cs_CZ/docs/user-guide/mocha/online-exploit/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/cs_CZ/docs/vwii/vwii-modding.md b/translations/cs_CZ/docs/vwii/vwii-modding.md index c301b7b7f..64bdca1af 100644 --- a/translations/cs_CZ/docs/vwii/vwii-modding.md +++ b/translations/cs_CZ/docs/vwii/vwii-modding.md @@ -35,11 +35,11 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch the `Wii U NAND Dumper` application. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **optional** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **optional** + - Dump SLC: **optional** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **optional** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slccmpt.bin`, `otp.bin` and if you chose to go with a full backup, `seeprom.bin`, `slc.bin`, and `every mlc.bin.part` file to your computer. @@ -51,10 +51,10 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `A` to backup the Mii Channel and inject the Hackmii Installer then wait until it says Successfully injected wuphax!. - - You will be taken back to the Wii U Menu after a few seconds. + - You will be taken back to the Wii U Menu after a few seconds. 1. Launch vWii (the Wii Menu icon). 1. Launch the vWii Mii Channel. - - If Wuphax has successfully been injected, you will now see the scam warning screen. + - If Wuphax has successfully been injected, you will now see the scam warning screen. 1. Wait until you see `Press 1 to continue` and then press the `1` button. 1. Select `continue`, Install The Homebrew Channel and `Yes, continue`. 1. If The Homebrew Channel has successfully been installed, select `continue` and then `exit`. @@ -62,8 +62,8 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `B` to restore the Mii Channel then wait until it says Mii Channel restored!. - - You will be taken back to the Wii U Menu after a few seconds. - - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). + - You will be taken back to the Wii U Menu after a few seconds. + - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). ### Installing cIOSes @@ -75,19 +75,19 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch The Homebrew Channel. 1. Launch d2x cIOS Installer. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `56` - - Select cIOS slot: `249` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `56` + - Select cIOS slot: `249` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `57` - - Select cIOS slot: `250` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `57` + - Select cIOS slot: `250` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `58` - - Select cIOS slot: `251` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `58` + - Select cIOS slot: `251` 1. Press the `A` button to install. 1. Press the `B` button to exit. diff --git a/translations/da_DK/docs/extras/block-updates.md b/translations/da_DK/docs/extras/block-updates.md index 138f56793..6d1a63a79 100644 --- a/translations/da_DK/docs/extras/block-updates.md +++ b/translations/da_DK/docs/extras/block-updates.md @@ -30,8 +30,8 @@ Currently, two ways exist to block updates on the Wii U system: 1. Plug the SD Card into your Wii U console and power it on. 1. Enter the Wii U's system settings and navigate to `Internet > Connect to the Internet > Connection List >` `Your WiFi connection > Change Settings > DNS` and set the option to `Do not auto-obtain`. 1. You will be asked to input a primary and secondary DNS. Enter the following IP addresses: - - Primary DNS: 168.235.092.108 - - Secondary DNS: 081.004.127.020 DNS Block + - Primary DNS: 168.235.092.108 + - Secondary DNS: 081.004.127.020 DNS Block 1. Click on confirm. 1. You are now blocking updates. In order to access the eShop, run the NNUPatcher app from the Homebrew Launcher before launching the eShop. diff --git a/translations/da_DK/docs/extras/configurable-payload.md b/translations/da_DK/docs/extras/configurable-payload.md index 68e33baea..3068e9e1c 100644 --- a/translations/da_DK/docs/extras/configurable-payload.md +++ b/translations/da_DK/docs/extras/configurable-payload.md @@ -19,4 +19,4 @@ This payload is configurable, similar to Haxchi's configuration. This could be v 1. Extract the `Configurable_Payload.zip` file to the root of your SD Card. If it prompts you to overwrite the files on your SD Card, do so. 1. Place the SD Card into your Wii U and launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. If everything has been done correctly, you should be taken back to the Wii U Menu. Mocha has now been enabled and you can use the Homebrew Launcher Channel you installed earlier. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. diff --git a/translations/da_DK/docs/extras/dump-games.md b/translations/da_DK/docs/extras/dump-games.md index 63c7044ae..d7b48a17a 100644 --- a/translations/da_DK/docs/extras/dump-games.md +++ b/translations/da_DK/docs/extras/dump-games.md @@ -103,11 +103,11 @@ Dumping your Discs allows you to install a copy of your game to the system NAND/ 1. Plug in your USB device. The Wii U will ask you format it. Cancel with No! 1. Launch the Homebrew Launcher and start the MochaFAT32 app. 1. In the configuration menu, set the following settings: - - Config view mode: default - - Skip this menu on launch: on - - Don't relaunch OS: off - - Launch System Menu: on - - RedNAND: off + - Config view mode: default + - Skip this menu on launch: on + - Don't relaunch OS: off + - Launch System Menu: on + - RedNAND: off 1. Your console will load the Wii U menu with your USB device now replacing the SD Card. 1. Launch the Homebrew Launcher and open the disc2app app. 1. Eject any inserted game disc and press the A button to begin the dumping process. diff --git a/translations/da_DK/docs/extras/dump-wii-games.md b/translations/da_DK/docs/extras/dump-wii-games.md index db3692a09..1d98d4209 100644 --- a/translations/da_DK/docs/extras/dump-wii-games.md +++ b/translations/da_DK/docs/extras/dump-wii-games.md @@ -24,15 +24,15 @@ Dumping your Discs allows you to: play them on a Wii emulator (namely Dolphin), 1. Read the Disclaimer then press A. 1. Select Yes to enable Checksum Calculations. 1. Select either USB or Front SD depending on which device you want to use for the dumping process. - - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. + - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. 1. Press A to continue. 1. Select No on the screen that asks you to download redump.org DAT files. 1. Insert your disc then press A. 1. Go [on this page](https://wiki.dolphin-emu.org/index.php?title=Category:Dual_Layer_Disc_games) to see if your disc is dual-layered. 1. Set everything to match the following: - - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) - - Chunk Size: `Max` - - New device per chunk: `No` + - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) + - Chunk Size: `Max` + - New device per chunk: `No` 1. If you want to dump multiple discs, select Yes to remember your settings. If not, select No. ?> Be prepared to wait a while. The dumping process can take 30 minutes to 1 hour depending on your SD Card's speeds. diff --git a/translations/da_DK/docs/troubleshooting/fix-errcode-112-1037.md b/translations/da_DK/docs/troubleshooting/fix-errcode-112-1037.md index 98b8f454c..bce0e7fae 100644 --- a/translations/da_DK/docs/troubleshooting/fix-errcode-112-1037.md +++ b/translations/da_DK/docs/troubleshooting/fix-errcode-112-1037.md @@ -25,14 +25,14 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a command prompt window. 1. Use the following command: `cd `. - - Example: cd C:\Users\username\Downloads. + - Example: cd C:\Users\username\Downloads. 1. Use the following command: `py -3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. @@ -45,15 +45,15 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a Terminal window. 1. Use the following command: `cd `. - - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. - - On Linux, the most common place to find your downloaded files is /home/username/Downloads. + - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. + - On Linux, the most common place to find your downloaded files is /home/username/Downloads. 1. Use the following command: `python3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. diff --git a/translations/da_DK/docs/user-guide/cbhc/browser-exploit.md b/translations/da_DK/docs/user-guide/cbhc/browser-exploit.md index 6e1553c47..aa6e836d9 100644 --- a/translations/da_DK/docs/user-guide/cbhc/browser-exploit.md +++ b/translations/da_DK/docs/user-guide/cbhc/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/da_DK/docs/user-guide/cbhc/nand-backup.md b/translations/da_DK/docs/user-guide/cbhc/nand-backup.md index e24bdaf1b..e324b7a81 100644 --- a/translations/da_DK/docs/user-guide/cbhc/nand-backup.md +++ b/translations/da_DK/docs/user-guide/cbhc/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/da_DK/docs/user-guide/haxchi/browser-exploit.md b/translations/da_DK/docs/user-guide/haxchi/browser-exploit.md index 826e038f3..8853ba483 100644 --- a/translations/da_DK/docs/user-guide/haxchi/browser-exploit.md +++ b/translations/da_DK/docs/user-guide/haxchi/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/da_DK/docs/user-guide/haxchi/nand-backup.md b/translations/da_DK/docs/user-guide/haxchi/nand-backup.md index 75200207a..9d6d642ad 100644 --- a/translations/da_DK/docs/user-guide/haxchi/nand-backup.md +++ b/translations/da_DK/docs/user-guide/haxchi/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/da_DK/docs/user-guide/mocha/indexiine/browser-exploit.md b/translations/da_DK/docs/user-guide/mocha/indexiine/browser-exploit.md index 83505773d..c14364eb9 100644 --- a/translations/da_DK/docs/user-guide/mocha/indexiine/browser-exploit.md +++ b/translations/da_DK/docs/user-guide/mocha/indexiine/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/da_DK/docs/user-guide/mocha/indexiine/browser-modding.md b/translations/da_DK/docs/user-guide/mocha/indexiine/browser-modding.md index 2aa249f4c..2bdfe4a37 100644 --- a/translations/da_DK/docs/user-guide/mocha/indexiine/browser-modding.md +++ b/translations/da_DK/docs/user-guide/mocha/indexiine/browser-modding.md @@ -12,7 +12,7 @@ Now that you have your NAND backup in case anything goes wrong later, you can in 1. Turn on your Wii U. 1. Launch the internet browser and open the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. 1. Navigate through the Homebrew Launcher and launch the `Indexiine Installer` app. 1. Press the A button to install Indexiine. 1. When the process completed, close the Homebrew Launcher to get back to your Wii U menu. diff --git a/translations/da_DK/docs/user-guide/mocha/indexiine/nand-backup.md b/translations/da_DK/docs/user-guide/mocha/indexiine/nand-backup.md index b0809c71c..88814cff8 100644 --- a/translations/da_DK/docs/user-guide/mocha/indexiine/nand-backup.md +++ b/translations/da_DK/docs/user-guide/mocha/indexiine/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/da_DK/docs/user-guide/mocha/online-exploit/browser-exploit.md b/translations/da_DK/docs/user-guide/mocha/online-exploit/browser-exploit.md index 8cbf2c754..30b7c94c5 100644 --- a/translations/da_DK/docs/user-guide/mocha/online-exploit/browser-exploit.md +++ b/translations/da_DK/docs/user-guide/mocha/online-exploit/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/da_DK/docs/user-guide/mocha/online-exploit/nand-backup.md b/translations/da_DK/docs/user-guide/mocha/online-exploit/nand-backup.md index 6513b4f51..adcbfaf3a 100644 --- a/translations/da_DK/docs/user-guide/mocha/online-exploit/nand-backup.md +++ b/translations/da_DK/docs/user-guide/mocha/online-exploit/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/da_DK/docs/vwii/vwii-modding.md b/translations/da_DK/docs/vwii/vwii-modding.md index c301b7b7f..64bdca1af 100644 --- a/translations/da_DK/docs/vwii/vwii-modding.md +++ b/translations/da_DK/docs/vwii/vwii-modding.md @@ -35,11 +35,11 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch the `Wii U NAND Dumper` application. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **optional** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **optional** + - Dump SLC: **optional** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **optional** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slccmpt.bin`, `otp.bin` and if you chose to go with a full backup, `seeprom.bin`, `slc.bin`, and `every mlc.bin.part` file to your computer. @@ -51,10 +51,10 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `A` to backup the Mii Channel and inject the Hackmii Installer then wait until it says Successfully injected wuphax!. - - You will be taken back to the Wii U Menu after a few seconds. + - You will be taken back to the Wii U Menu after a few seconds. 1. Launch vWii (the Wii Menu icon). 1. Launch the vWii Mii Channel. - - If Wuphax has successfully been injected, you will now see the scam warning screen. + - If Wuphax has successfully been injected, you will now see the scam warning screen. 1. Wait until you see `Press 1 to continue` and then press the `1` button. 1. Select `continue`, Install The Homebrew Channel and `Yes, continue`. 1. If The Homebrew Channel has successfully been installed, select `continue` and then `exit`. @@ -62,8 +62,8 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `B` to restore the Mii Channel then wait until it says Mii Channel restored!. - - You will be taken back to the Wii U Menu after a few seconds. - - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). + - You will be taken back to the Wii U Menu after a few seconds. + - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). ### Installing cIOSes @@ -75,19 +75,19 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch The Homebrew Channel. 1. Launch d2x cIOS Installer. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `56` - - Select cIOS slot: `249` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `56` + - Select cIOS slot: `249` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `57` - - Select cIOS slot: `250` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `57` + - Select cIOS slot: `250` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `58` - - Select cIOS slot: `251` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `58` + - Select cIOS slot: `251` 1. Press the `A` button to install. 1. Press the `B` button to exit. diff --git a/translations/de_DE/docs/extras/block-updates.md b/translations/de_DE/docs/extras/block-updates.md index 138f56793..6d1a63a79 100644 --- a/translations/de_DE/docs/extras/block-updates.md +++ b/translations/de_DE/docs/extras/block-updates.md @@ -30,8 +30,8 @@ Currently, two ways exist to block updates on the Wii U system: 1. Plug the SD Card into your Wii U console and power it on. 1. Enter the Wii U's system settings and navigate to `Internet > Connect to the Internet > Connection List >` `Your WiFi connection > Change Settings > DNS` and set the option to `Do not auto-obtain`. 1. You will be asked to input a primary and secondary DNS. Enter the following IP addresses: - - Primary DNS: 168.235.092.108 - - Secondary DNS: 081.004.127.020 DNS Block + - Primary DNS: 168.235.092.108 + - Secondary DNS: 081.004.127.020 DNS Block 1. Click on confirm. 1. You are now blocking updates. In order to access the eShop, run the NNUPatcher app from the Homebrew Launcher before launching the eShop. diff --git a/translations/de_DE/docs/extras/configurable-payload.md b/translations/de_DE/docs/extras/configurable-payload.md index 68e33baea..3068e9e1c 100644 --- a/translations/de_DE/docs/extras/configurable-payload.md +++ b/translations/de_DE/docs/extras/configurable-payload.md @@ -19,4 +19,4 @@ This payload is configurable, similar to Haxchi's configuration. This could be v 1. Extract the `Configurable_Payload.zip` file to the root of your SD Card. If it prompts you to overwrite the files on your SD Card, do so. 1. Place the SD Card into your Wii U and launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. If everything has been done correctly, you should be taken back to the Wii U Menu. Mocha has now been enabled and you can use the Homebrew Launcher Channel you installed earlier. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. diff --git a/translations/de_DE/docs/extras/dump-games.md b/translations/de_DE/docs/extras/dump-games.md index 63c7044ae..d7b48a17a 100644 --- a/translations/de_DE/docs/extras/dump-games.md +++ b/translations/de_DE/docs/extras/dump-games.md @@ -103,11 +103,11 @@ Dumping your Discs allows you to install a copy of your game to the system NAND/ 1. Plug in your USB device. The Wii U will ask you format it. Cancel with No! 1. Launch the Homebrew Launcher and start the MochaFAT32 app. 1. In the configuration menu, set the following settings: - - Config view mode: default - - Skip this menu on launch: on - - Don't relaunch OS: off - - Launch System Menu: on - - RedNAND: off + - Config view mode: default + - Skip this menu on launch: on + - Don't relaunch OS: off + - Launch System Menu: on + - RedNAND: off 1. Your console will load the Wii U menu with your USB device now replacing the SD Card. 1. Launch the Homebrew Launcher and open the disc2app app. 1. Eject any inserted game disc and press the A button to begin the dumping process. diff --git a/translations/de_DE/docs/extras/dump-wii-games.md b/translations/de_DE/docs/extras/dump-wii-games.md index db3692a09..1d98d4209 100644 --- a/translations/de_DE/docs/extras/dump-wii-games.md +++ b/translations/de_DE/docs/extras/dump-wii-games.md @@ -24,15 +24,15 @@ Dumping your Discs allows you to: play them on a Wii emulator (namely Dolphin), 1. Read the Disclaimer then press A. 1. Select Yes to enable Checksum Calculations. 1. Select either USB or Front SD depending on which device you want to use for the dumping process. - - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. + - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. 1. Press A to continue. 1. Select No on the screen that asks you to download redump.org DAT files. 1. Insert your disc then press A. 1. Go [on this page](https://wiki.dolphin-emu.org/index.php?title=Category:Dual_Layer_Disc_games) to see if your disc is dual-layered. 1. Set everything to match the following: - - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) - - Chunk Size: `Max` - - New device per chunk: `No` + - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) + - Chunk Size: `Max` + - New device per chunk: `No` 1. If you want to dump multiple discs, select Yes to remember your settings. If not, select No. ?> Be prepared to wait a while. The dumping process can take 30 minutes to 1 hour depending on your SD Card's speeds. diff --git a/translations/de_DE/docs/troubleshooting/fix-errcode-112-1037.md b/translations/de_DE/docs/troubleshooting/fix-errcode-112-1037.md index 98b8f454c..bce0e7fae 100644 --- a/translations/de_DE/docs/troubleshooting/fix-errcode-112-1037.md +++ b/translations/de_DE/docs/troubleshooting/fix-errcode-112-1037.md @@ -25,14 +25,14 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a command prompt window. 1. Use the following command: `cd `. - - Example: cd C:\Users\username\Downloads. + - Example: cd C:\Users\username\Downloads. 1. Use the following command: `py -3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. @@ -45,15 +45,15 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a Terminal window. 1. Use the following command: `cd `. - - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. - - On Linux, the most common place to find your downloaded files is /home/username/Downloads. + - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. + - On Linux, the most common place to find your downloaded files is /home/username/Downloads. 1. Use the following command: `python3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. diff --git a/translations/de_DE/docs/user-guide/cbhc/browser-exploit.md b/translations/de_DE/docs/user-guide/cbhc/browser-exploit.md index 6e1553c47..aa6e836d9 100644 --- a/translations/de_DE/docs/user-guide/cbhc/browser-exploit.md +++ b/translations/de_DE/docs/user-guide/cbhc/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/de_DE/docs/user-guide/cbhc/nand-backup.md b/translations/de_DE/docs/user-guide/cbhc/nand-backup.md index e24bdaf1b..e324b7a81 100644 --- a/translations/de_DE/docs/user-guide/cbhc/nand-backup.md +++ b/translations/de_DE/docs/user-guide/cbhc/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/de_DE/docs/user-guide/haxchi/browser-exploit.md b/translations/de_DE/docs/user-guide/haxchi/browser-exploit.md index 826e038f3..8853ba483 100644 --- a/translations/de_DE/docs/user-guide/haxchi/browser-exploit.md +++ b/translations/de_DE/docs/user-guide/haxchi/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/de_DE/docs/user-guide/haxchi/nand-backup.md b/translations/de_DE/docs/user-guide/haxchi/nand-backup.md index 75200207a..9d6d642ad 100644 --- a/translations/de_DE/docs/user-guide/haxchi/nand-backup.md +++ b/translations/de_DE/docs/user-guide/haxchi/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/de_DE/docs/user-guide/mocha/indexiine/browser-exploit.md b/translations/de_DE/docs/user-guide/mocha/indexiine/browser-exploit.md index 83505773d..c14364eb9 100644 --- a/translations/de_DE/docs/user-guide/mocha/indexiine/browser-exploit.md +++ b/translations/de_DE/docs/user-guide/mocha/indexiine/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/de_DE/docs/user-guide/mocha/indexiine/browser-modding.md b/translations/de_DE/docs/user-guide/mocha/indexiine/browser-modding.md index 2aa249f4c..2bdfe4a37 100644 --- a/translations/de_DE/docs/user-guide/mocha/indexiine/browser-modding.md +++ b/translations/de_DE/docs/user-guide/mocha/indexiine/browser-modding.md @@ -12,7 +12,7 @@ Now that you have your NAND backup in case anything goes wrong later, you can in 1. Turn on your Wii U. 1. Launch the internet browser and open the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. 1. Navigate through the Homebrew Launcher and launch the `Indexiine Installer` app. 1. Press the A button to install Indexiine. 1. When the process completed, close the Homebrew Launcher to get back to your Wii U menu. diff --git a/translations/de_DE/docs/user-guide/mocha/indexiine/nand-backup.md b/translations/de_DE/docs/user-guide/mocha/indexiine/nand-backup.md index b0809c71c..88814cff8 100644 --- a/translations/de_DE/docs/user-guide/mocha/indexiine/nand-backup.md +++ b/translations/de_DE/docs/user-guide/mocha/indexiine/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/de_DE/docs/user-guide/mocha/online-exploit/browser-exploit.md b/translations/de_DE/docs/user-guide/mocha/online-exploit/browser-exploit.md index 8cbf2c754..30b7c94c5 100644 --- a/translations/de_DE/docs/user-guide/mocha/online-exploit/browser-exploit.md +++ b/translations/de_DE/docs/user-guide/mocha/online-exploit/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/de_DE/docs/user-guide/mocha/online-exploit/nand-backup.md b/translations/de_DE/docs/user-guide/mocha/online-exploit/nand-backup.md index 6513b4f51..adcbfaf3a 100644 --- a/translations/de_DE/docs/user-guide/mocha/online-exploit/nand-backup.md +++ b/translations/de_DE/docs/user-guide/mocha/online-exploit/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/de_DE/docs/vwii/vwii-modding.md b/translations/de_DE/docs/vwii/vwii-modding.md index c301b7b7f..64bdca1af 100644 --- a/translations/de_DE/docs/vwii/vwii-modding.md +++ b/translations/de_DE/docs/vwii/vwii-modding.md @@ -35,11 +35,11 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch the `Wii U NAND Dumper` application. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **optional** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **optional** + - Dump SLC: **optional** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **optional** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slccmpt.bin`, `otp.bin` and if you chose to go with a full backup, `seeprom.bin`, `slc.bin`, and `every mlc.bin.part` file to your computer. @@ -51,10 +51,10 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `A` to backup the Mii Channel and inject the Hackmii Installer then wait until it says Successfully injected wuphax!. - - You will be taken back to the Wii U Menu after a few seconds. + - You will be taken back to the Wii U Menu after a few seconds. 1. Launch vWii (the Wii Menu icon). 1. Launch the vWii Mii Channel. - - If Wuphax has successfully been injected, you will now see the scam warning screen. + - If Wuphax has successfully been injected, you will now see the scam warning screen. 1. Wait until you see `Press 1 to continue` and then press the `1` button. 1. Select `continue`, Install The Homebrew Channel and `Yes, continue`. 1. If The Homebrew Channel has successfully been installed, select `continue` and then `exit`. @@ -62,8 +62,8 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `B` to restore the Mii Channel then wait until it says Mii Channel restored!. - - You will be taken back to the Wii U Menu after a few seconds. - - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). + - You will be taken back to the Wii U Menu after a few seconds. + - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). ### Installing cIOSes @@ -75,19 +75,19 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch The Homebrew Channel. 1. Launch d2x cIOS Installer. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `56` - - Select cIOS slot: `249` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `56` + - Select cIOS slot: `249` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `57` - - Select cIOS slot: `250` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `57` + - Select cIOS slot: `250` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `58` - - Select cIOS slot: `251` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `58` + - Select cIOS slot: `251` 1. Press the `A` button to install. 1. Press the `B` button to exit. diff --git a/translations/el_GR/docs/extras/block-updates.md b/translations/el_GR/docs/extras/block-updates.md index 138f56793..6d1a63a79 100644 --- a/translations/el_GR/docs/extras/block-updates.md +++ b/translations/el_GR/docs/extras/block-updates.md @@ -30,8 +30,8 @@ Currently, two ways exist to block updates on the Wii U system: 1. Plug the SD Card into your Wii U console and power it on. 1. Enter the Wii U's system settings and navigate to `Internet > Connect to the Internet > Connection List >` `Your WiFi connection > Change Settings > DNS` and set the option to `Do not auto-obtain`. 1. You will be asked to input a primary and secondary DNS. Enter the following IP addresses: - - Primary DNS: 168.235.092.108 - - Secondary DNS: 081.004.127.020 DNS Block + - Primary DNS: 168.235.092.108 + - Secondary DNS: 081.004.127.020 DNS Block 1. Click on confirm. 1. You are now blocking updates. In order to access the eShop, run the NNUPatcher app from the Homebrew Launcher before launching the eShop. diff --git a/translations/el_GR/docs/extras/configurable-payload.md b/translations/el_GR/docs/extras/configurable-payload.md index 68e33baea..3068e9e1c 100644 --- a/translations/el_GR/docs/extras/configurable-payload.md +++ b/translations/el_GR/docs/extras/configurable-payload.md @@ -19,4 +19,4 @@ This payload is configurable, similar to Haxchi's configuration. This could be v 1. Extract the `Configurable_Payload.zip` file to the root of your SD Card. If it prompts you to overwrite the files on your SD Card, do so. 1. Place the SD Card into your Wii U and launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. If everything has been done correctly, you should be taken back to the Wii U Menu. Mocha has now been enabled and you can use the Homebrew Launcher Channel you installed earlier. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. diff --git a/translations/el_GR/docs/extras/dump-games.md b/translations/el_GR/docs/extras/dump-games.md index 63c7044ae..d7b48a17a 100644 --- a/translations/el_GR/docs/extras/dump-games.md +++ b/translations/el_GR/docs/extras/dump-games.md @@ -103,11 +103,11 @@ Dumping your Discs allows you to install a copy of your game to the system NAND/ 1. Plug in your USB device. The Wii U will ask you format it. Cancel with No! 1. Launch the Homebrew Launcher and start the MochaFAT32 app. 1. In the configuration menu, set the following settings: - - Config view mode: default - - Skip this menu on launch: on - - Don't relaunch OS: off - - Launch System Menu: on - - RedNAND: off + - Config view mode: default + - Skip this menu on launch: on + - Don't relaunch OS: off + - Launch System Menu: on + - RedNAND: off 1. Your console will load the Wii U menu with your USB device now replacing the SD Card. 1. Launch the Homebrew Launcher and open the disc2app app. 1. Eject any inserted game disc and press the A button to begin the dumping process. diff --git a/translations/el_GR/docs/extras/dump-wii-games.md b/translations/el_GR/docs/extras/dump-wii-games.md index db3692a09..1d98d4209 100644 --- a/translations/el_GR/docs/extras/dump-wii-games.md +++ b/translations/el_GR/docs/extras/dump-wii-games.md @@ -24,15 +24,15 @@ Dumping your Discs allows you to: play them on a Wii emulator (namely Dolphin), 1. Read the Disclaimer then press A. 1. Select Yes to enable Checksum Calculations. 1. Select either USB or Front SD depending on which device you want to use for the dumping process. - - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. + - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. 1. Press A to continue. 1. Select No on the screen that asks you to download redump.org DAT files. 1. Insert your disc then press A. 1. Go [on this page](https://wiki.dolphin-emu.org/index.php?title=Category:Dual_Layer_Disc_games) to see if your disc is dual-layered. 1. Set everything to match the following: - - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) - - Chunk Size: `Max` - - New device per chunk: `No` + - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) + - Chunk Size: `Max` + - New device per chunk: `No` 1. If you want to dump multiple discs, select Yes to remember your settings. If not, select No. ?> Be prepared to wait a while. The dumping process can take 30 minutes to 1 hour depending on your SD Card's speeds. diff --git a/translations/el_GR/docs/troubleshooting/fix-errcode-112-1037.md b/translations/el_GR/docs/troubleshooting/fix-errcode-112-1037.md index 98b8f454c..bce0e7fae 100644 --- a/translations/el_GR/docs/troubleshooting/fix-errcode-112-1037.md +++ b/translations/el_GR/docs/troubleshooting/fix-errcode-112-1037.md @@ -25,14 +25,14 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a command prompt window. 1. Use the following command: `cd `. - - Example: cd C:\Users\username\Downloads. + - Example: cd C:\Users\username\Downloads. 1. Use the following command: `py -3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. @@ -45,15 +45,15 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a Terminal window. 1. Use the following command: `cd `. - - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. - - On Linux, the most common place to find your downloaded files is /home/username/Downloads. + - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. + - On Linux, the most common place to find your downloaded files is /home/username/Downloads. 1. Use the following command: `python3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. diff --git a/translations/el_GR/docs/user-guide/cbhc/browser-exploit.md b/translations/el_GR/docs/user-guide/cbhc/browser-exploit.md index 6e1553c47..aa6e836d9 100644 --- a/translations/el_GR/docs/user-guide/cbhc/browser-exploit.md +++ b/translations/el_GR/docs/user-guide/cbhc/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/el_GR/docs/user-guide/cbhc/nand-backup.md b/translations/el_GR/docs/user-guide/cbhc/nand-backup.md index e24bdaf1b..e324b7a81 100644 --- a/translations/el_GR/docs/user-guide/cbhc/nand-backup.md +++ b/translations/el_GR/docs/user-guide/cbhc/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/el_GR/docs/user-guide/haxchi/browser-exploit.md b/translations/el_GR/docs/user-guide/haxchi/browser-exploit.md index 826e038f3..8853ba483 100644 --- a/translations/el_GR/docs/user-guide/haxchi/browser-exploit.md +++ b/translations/el_GR/docs/user-guide/haxchi/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/el_GR/docs/user-guide/haxchi/nand-backup.md b/translations/el_GR/docs/user-guide/haxchi/nand-backup.md index 75200207a..9d6d642ad 100644 --- a/translations/el_GR/docs/user-guide/haxchi/nand-backup.md +++ b/translations/el_GR/docs/user-guide/haxchi/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/el_GR/docs/user-guide/mocha/indexiine/browser-exploit.md b/translations/el_GR/docs/user-guide/mocha/indexiine/browser-exploit.md index 83505773d..c14364eb9 100644 --- a/translations/el_GR/docs/user-guide/mocha/indexiine/browser-exploit.md +++ b/translations/el_GR/docs/user-guide/mocha/indexiine/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/el_GR/docs/user-guide/mocha/indexiine/browser-modding.md b/translations/el_GR/docs/user-guide/mocha/indexiine/browser-modding.md index 2aa249f4c..2bdfe4a37 100644 --- a/translations/el_GR/docs/user-guide/mocha/indexiine/browser-modding.md +++ b/translations/el_GR/docs/user-guide/mocha/indexiine/browser-modding.md @@ -12,7 +12,7 @@ Now that you have your NAND backup in case anything goes wrong later, you can in 1. Turn on your Wii U. 1. Launch the internet browser and open the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. 1. Navigate through the Homebrew Launcher and launch the `Indexiine Installer` app. 1. Press the A button to install Indexiine. 1. When the process completed, close the Homebrew Launcher to get back to your Wii U menu. diff --git a/translations/el_GR/docs/user-guide/mocha/indexiine/nand-backup.md b/translations/el_GR/docs/user-guide/mocha/indexiine/nand-backup.md index b0809c71c..88814cff8 100644 --- a/translations/el_GR/docs/user-guide/mocha/indexiine/nand-backup.md +++ b/translations/el_GR/docs/user-guide/mocha/indexiine/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/el_GR/docs/user-guide/mocha/online-exploit/browser-exploit.md b/translations/el_GR/docs/user-guide/mocha/online-exploit/browser-exploit.md index 8cbf2c754..30b7c94c5 100644 --- a/translations/el_GR/docs/user-guide/mocha/online-exploit/browser-exploit.md +++ b/translations/el_GR/docs/user-guide/mocha/online-exploit/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/el_GR/docs/user-guide/mocha/online-exploit/nand-backup.md b/translations/el_GR/docs/user-guide/mocha/online-exploit/nand-backup.md index 6513b4f51..adcbfaf3a 100644 --- a/translations/el_GR/docs/user-guide/mocha/online-exploit/nand-backup.md +++ b/translations/el_GR/docs/user-guide/mocha/online-exploit/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/el_GR/docs/vwii/vwii-modding.md b/translations/el_GR/docs/vwii/vwii-modding.md index c301b7b7f..64bdca1af 100644 --- a/translations/el_GR/docs/vwii/vwii-modding.md +++ b/translations/el_GR/docs/vwii/vwii-modding.md @@ -35,11 +35,11 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch the `Wii U NAND Dumper` application. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **optional** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **optional** + - Dump SLC: **optional** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **optional** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slccmpt.bin`, `otp.bin` and if you chose to go with a full backup, `seeprom.bin`, `slc.bin`, and `every mlc.bin.part` file to your computer. @@ -51,10 +51,10 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `A` to backup the Mii Channel and inject the Hackmii Installer then wait until it says Successfully injected wuphax!. - - You will be taken back to the Wii U Menu after a few seconds. + - You will be taken back to the Wii U Menu after a few seconds. 1. Launch vWii (the Wii Menu icon). 1. Launch the vWii Mii Channel. - - If Wuphax has successfully been injected, you will now see the scam warning screen. + - If Wuphax has successfully been injected, you will now see the scam warning screen. 1. Wait until you see `Press 1 to continue` and then press the `1` button. 1. Select `continue`, Install The Homebrew Channel and `Yes, continue`. 1. If The Homebrew Channel has successfully been installed, select `continue` and then `exit`. @@ -62,8 +62,8 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `B` to restore the Mii Channel then wait until it says Mii Channel restored!. - - You will be taken back to the Wii U Menu after a few seconds. - - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). + - You will be taken back to the Wii U Menu after a few seconds. + - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). ### Installing cIOSes @@ -75,19 +75,19 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch The Homebrew Channel. 1. Launch d2x cIOS Installer. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `56` - - Select cIOS slot: `249` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `56` + - Select cIOS slot: `249` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `57` - - Select cIOS slot: `250` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `57` + - Select cIOS slot: `250` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `58` - - Select cIOS slot: `251` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `58` + - Select cIOS slot: `251` 1. Press the `A` button to install. 1. Press the `B` button to exit. diff --git a/translations/es_ES/docs/extras/block-updates.md b/translations/es_ES/docs/extras/block-updates.md index 138f56793..6d1a63a79 100644 --- a/translations/es_ES/docs/extras/block-updates.md +++ b/translations/es_ES/docs/extras/block-updates.md @@ -30,8 +30,8 @@ Currently, two ways exist to block updates on the Wii U system: 1. Plug the SD Card into your Wii U console and power it on. 1. Enter the Wii U's system settings and navigate to `Internet > Connect to the Internet > Connection List >` `Your WiFi connection > Change Settings > DNS` and set the option to `Do not auto-obtain`. 1. You will be asked to input a primary and secondary DNS. Enter the following IP addresses: - - Primary DNS: 168.235.092.108 - - Secondary DNS: 081.004.127.020 DNS Block + - Primary DNS: 168.235.092.108 + - Secondary DNS: 081.004.127.020 DNS Block 1. Click on confirm. 1. You are now blocking updates. In order to access the eShop, run the NNUPatcher app from the Homebrew Launcher before launching the eShop. diff --git a/translations/es_ES/docs/extras/configurable-payload.md b/translations/es_ES/docs/extras/configurable-payload.md index 68e33baea..3068e9e1c 100644 --- a/translations/es_ES/docs/extras/configurable-payload.md +++ b/translations/es_ES/docs/extras/configurable-payload.md @@ -19,4 +19,4 @@ This payload is configurable, similar to Haxchi's configuration. This could be v 1. Extract the `Configurable_Payload.zip` file to the root of your SD Card. If it prompts you to overwrite the files on your SD Card, do so. 1. Place the SD Card into your Wii U and launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. If everything has been done correctly, you should be taken back to the Wii U Menu. Mocha has now been enabled and you can use the Homebrew Launcher Channel you installed earlier. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. diff --git a/translations/es_ES/docs/extras/dump-games.md b/translations/es_ES/docs/extras/dump-games.md index 63c7044ae..d7b48a17a 100644 --- a/translations/es_ES/docs/extras/dump-games.md +++ b/translations/es_ES/docs/extras/dump-games.md @@ -103,11 +103,11 @@ Dumping your Discs allows you to install a copy of your game to the system NAND/ 1. Plug in your USB device. The Wii U will ask you format it. Cancel with No! 1. Launch the Homebrew Launcher and start the MochaFAT32 app. 1. In the configuration menu, set the following settings: - - Config view mode: default - - Skip this menu on launch: on - - Don't relaunch OS: off - - Launch System Menu: on - - RedNAND: off + - Config view mode: default + - Skip this menu on launch: on + - Don't relaunch OS: off + - Launch System Menu: on + - RedNAND: off 1. Your console will load the Wii U menu with your USB device now replacing the SD Card. 1. Launch the Homebrew Launcher and open the disc2app app. 1. Eject any inserted game disc and press the A button to begin the dumping process. diff --git a/translations/es_ES/docs/extras/dump-wii-games.md b/translations/es_ES/docs/extras/dump-wii-games.md index db3692a09..1d98d4209 100644 --- a/translations/es_ES/docs/extras/dump-wii-games.md +++ b/translations/es_ES/docs/extras/dump-wii-games.md @@ -24,15 +24,15 @@ Dumping your Discs allows you to: play them on a Wii emulator (namely Dolphin), 1. Read the Disclaimer then press A. 1. Select Yes to enable Checksum Calculations. 1. Select either USB or Front SD depending on which device you want to use for the dumping process. - - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. + - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. 1. Press A to continue. 1. Select No on the screen that asks you to download redump.org DAT files. 1. Insert your disc then press A. 1. Go [on this page](https://wiki.dolphin-emu.org/index.php?title=Category:Dual_Layer_Disc_games) to see if your disc is dual-layered. 1. Set everything to match the following: - - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) - - Chunk Size: `Max` - - New device per chunk: `No` + - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) + - Chunk Size: `Max` + - New device per chunk: `No` 1. If you want to dump multiple discs, select Yes to remember your settings. If not, select No. ?> Be prepared to wait a while. The dumping process can take 30 minutes to 1 hour depending on your SD Card's speeds. diff --git a/translations/es_ES/docs/troubleshooting/fix-errcode-112-1037.md b/translations/es_ES/docs/troubleshooting/fix-errcode-112-1037.md index 98b8f454c..bce0e7fae 100644 --- a/translations/es_ES/docs/troubleshooting/fix-errcode-112-1037.md +++ b/translations/es_ES/docs/troubleshooting/fix-errcode-112-1037.md @@ -25,14 +25,14 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a command prompt window. 1. Use the following command: `cd `. - - Example: cd C:\Users\username\Downloads. + - Example: cd C:\Users\username\Downloads. 1. Use the following command: `py -3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. @@ -45,15 +45,15 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a Terminal window. 1. Use the following command: `cd `. - - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. - - On Linux, the most common place to find your downloaded files is /home/username/Downloads. + - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. + - On Linux, the most common place to find your downloaded files is /home/username/Downloads. 1. Use the following command: `python3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. diff --git a/translations/es_ES/docs/user-guide/cbhc/browser-exploit.md b/translations/es_ES/docs/user-guide/cbhc/browser-exploit.md index 6e1553c47..aa6e836d9 100644 --- a/translations/es_ES/docs/user-guide/cbhc/browser-exploit.md +++ b/translations/es_ES/docs/user-guide/cbhc/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/es_ES/docs/user-guide/cbhc/nand-backup.md b/translations/es_ES/docs/user-guide/cbhc/nand-backup.md index e24bdaf1b..e324b7a81 100644 --- a/translations/es_ES/docs/user-guide/cbhc/nand-backup.md +++ b/translations/es_ES/docs/user-guide/cbhc/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/es_ES/docs/user-guide/haxchi/browser-exploit.md b/translations/es_ES/docs/user-guide/haxchi/browser-exploit.md index 826e038f3..8853ba483 100644 --- a/translations/es_ES/docs/user-guide/haxchi/browser-exploit.md +++ b/translations/es_ES/docs/user-guide/haxchi/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/es_ES/docs/user-guide/haxchi/nand-backup.md b/translations/es_ES/docs/user-guide/haxchi/nand-backup.md index 75200207a..9d6d642ad 100644 --- a/translations/es_ES/docs/user-guide/haxchi/nand-backup.md +++ b/translations/es_ES/docs/user-guide/haxchi/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/es_ES/docs/user-guide/mocha/indexiine/browser-exploit.md b/translations/es_ES/docs/user-guide/mocha/indexiine/browser-exploit.md index 83505773d..c14364eb9 100644 --- a/translations/es_ES/docs/user-guide/mocha/indexiine/browser-exploit.md +++ b/translations/es_ES/docs/user-guide/mocha/indexiine/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/es_ES/docs/user-guide/mocha/indexiine/browser-modding.md b/translations/es_ES/docs/user-guide/mocha/indexiine/browser-modding.md index 2aa249f4c..2bdfe4a37 100644 --- a/translations/es_ES/docs/user-guide/mocha/indexiine/browser-modding.md +++ b/translations/es_ES/docs/user-guide/mocha/indexiine/browser-modding.md @@ -12,7 +12,7 @@ Now that you have your NAND backup in case anything goes wrong later, you can in 1. Turn on your Wii U. 1. Launch the internet browser and open the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. 1. Navigate through the Homebrew Launcher and launch the `Indexiine Installer` app. 1. Press the A button to install Indexiine. 1. When the process completed, close the Homebrew Launcher to get back to your Wii U menu. diff --git a/translations/es_ES/docs/user-guide/mocha/indexiine/nand-backup.md b/translations/es_ES/docs/user-guide/mocha/indexiine/nand-backup.md index b0809c71c..88814cff8 100644 --- a/translations/es_ES/docs/user-guide/mocha/indexiine/nand-backup.md +++ b/translations/es_ES/docs/user-guide/mocha/indexiine/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/es_ES/docs/user-guide/mocha/online-exploit/browser-exploit.md b/translations/es_ES/docs/user-guide/mocha/online-exploit/browser-exploit.md index 8cbf2c754..30b7c94c5 100644 --- a/translations/es_ES/docs/user-guide/mocha/online-exploit/browser-exploit.md +++ b/translations/es_ES/docs/user-guide/mocha/online-exploit/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/es_ES/docs/user-guide/mocha/online-exploit/nand-backup.md b/translations/es_ES/docs/user-guide/mocha/online-exploit/nand-backup.md index 6513b4f51..adcbfaf3a 100644 --- a/translations/es_ES/docs/user-guide/mocha/online-exploit/nand-backup.md +++ b/translations/es_ES/docs/user-guide/mocha/online-exploit/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/es_ES/docs/vwii/vwii-modding.md b/translations/es_ES/docs/vwii/vwii-modding.md index c301b7b7f..64bdca1af 100644 --- a/translations/es_ES/docs/vwii/vwii-modding.md +++ b/translations/es_ES/docs/vwii/vwii-modding.md @@ -35,11 +35,11 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch the `Wii U NAND Dumper` application. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **optional** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **optional** + - Dump SLC: **optional** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **optional** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slccmpt.bin`, `otp.bin` and if you chose to go with a full backup, `seeprom.bin`, `slc.bin`, and `every mlc.bin.part` file to your computer. @@ -51,10 +51,10 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `A` to backup the Mii Channel and inject the Hackmii Installer then wait until it says Successfully injected wuphax!. - - You will be taken back to the Wii U Menu after a few seconds. + - You will be taken back to the Wii U Menu after a few seconds. 1. Launch vWii (the Wii Menu icon). 1. Launch the vWii Mii Channel. - - If Wuphax has successfully been injected, you will now see the scam warning screen. + - If Wuphax has successfully been injected, you will now see the scam warning screen. 1. Wait until you see `Press 1 to continue` and then press the `1` button. 1. Select `continue`, Install The Homebrew Channel and `Yes, continue`. 1. If The Homebrew Channel has successfully been installed, select `continue` and then `exit`. @@ -62,8 +62,8 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `B` to restore the Mii Channel then wait until it says Mii Channel restored!. - - You will be taken back to the Wii U Menu after a few seconds. - - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). + - You will be taken back to the Wii U Menu after a few seconds. + - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). ### Installing cIOSes @@ -75,19 +75,19 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch The Homebrew Channel. 1. Launch d2x cIOS Installer. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `56` - - Select cIOS slot: `249` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `56` + - Select cIOS slot: `249` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `57` - - Select cIOS slot: `250` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `57` + - Select cIOS slot: `250` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `58` - - Select cIOS slot: `251` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `58` + - Select cIOS slot: `251` 1. Press the `A` button to install. 1. Press the `B` button to exit. diff --git a/translations/et_EE/docs/extras/block-updates.md b/translations/et_EE/docs/extras/block-updates.md index 138f56793..6d1a63a79 100644 --- a/translations/et_EE/docs/extras/block-updates.md +++ b/translations/et_EE/docs/extras/block-updates.md @@ -30,8 +30,8 @@ Currently, two ways exist to block updates on the Wii U system: 1. Plug the SD Card into your Wii U console and power it on. 1. Enter the Wii U's system settings and navigate to `Internet > Connect to the Internet > Connection List >` `Your WiFi connection > Change Settings > DNS` and set the option to `Do not auto-obtain`. 1. You will be asked to input a primary and secondary DNS. Enter the following IP addresses: - - Primary DNS: 168.235.092.108 - - Secondary DNS: 081.004.127.020 DNS Block + - Primary DNS: 168.235.092.108 + - Secondary DNS: 081.004.127.020 DNS Block 1. Click on confirm. 1. You are now blocking updates. In order to access the eShop, run the NNUPatcher app from the Homebrew Launcher before launching the eShop. diff --git a/translations/et_EE/docs/extras/configurable-payload.md b/translations/et_EE/docs/extras/configurable-payload.md index 68e33baea..3068e9e1c 100644 --- a/translations/et_EE/docs/extras/configurable-payload.md +++ b/translations/et_EE/docs/extras/configurable-payload.md @@ -19,4 +19,4 @@ This payload is configurable, similar to Haxchi's configuration. This could be v 1. Extract the `Configurable_Payload.zip` file to the root of your SD Card. If it prompts you to overwrite the files on your SD Card, do so. 1. Place the SD Card into your Wii U and launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. If everything has been done correctly, you should be taken back to the Wii U Menu. Mocha has now been enabled and you can use the Homebrew Launcher Channel you installed earlier. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. diff --git a/translations/et_EE/docs/extras/dump-games.md b/translations/et_EE/docs/extras/dump-games.md index 63c7044ae..d7b48a17a 100644 --- a/translations/et_EE/docs/extras/dump-games.md +++ b/translations/et_EE/docs/extras/dump-games.md @@ -103,11 +103,11 @@ Dumping your Discs allows you to install a copy of your game to the system NAND/ 1. Plug in your USB device. The Wii U will ask you format it. Cancel with No! 1. Launch the Homebrew Launcher and start the MochaFAT32 app. 1. In the configuration menu, set the following settings: - - Config view mode: default - - Skip this menu on launch: on - - Don't relaunch OS: off - - Launch System Menu: on - - RedNAND: off + - Config view mode: default + - Skip this menu on launch: on + - Don't relaunch OS: off + - Launch System Menu: on + - RedNAND: off 1. Your console will load the Wii U menu with your USB device now replacing the SD Card. 1. Launch the Homebrew Launcher and open the disc2app app. 1. Eject any inserted game disc and press the A button to begin the dumping process. diff --git a/translations/et_EE/docs/extras/dump-wii-games.md b/translations/et_EE/docs/extras/dump-wii-games.md index db3692a09..1d98d4209 100644 --- a/translations/et_EE/docs/extras/dump-wii-games.md +++ b/translations/et_EE/docs/extras/dump-wii-games.md @@ -24,15 +24,15 @@ Dumping your Discs allows you to: play them on a Wii emulator (namely Dolphin), 1. Read the Disclaimer then press A. 1. Select Yes to enable Checksum Calculations. 1. Select either USB or Front SD depending on which device you want to use for the dumping process. - - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. + - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. 1. Press A to continue. 1. Select No on the screen that asks you to download redump.org DAT files. 1. Insert your disc then press A. 1. Go [on this page](https://wiki.dolphin-emu.org/index.php?title=Category:Dual_Layer_Disc_games) to see if your disc is dual-layered. 1. Set everything to match the following: - - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) - - Chunk Size: `Max` - - New device per chunk: `No` + - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) + - Chunk Size: `Max` + - New device per chunk: `No` 1. If you want to dump multiple discs, select Yes to remember your settings. If not, select No. ?> Be prepared to wait a while. The dumping process can take 30 minutes to 1 hour depending on your SD Card's speeds. diff --git a/translations/et_EE/docs/troubleshooting/fix-errcode-112-1037.md b/translations/et_EE/docs/troubleshooting/fix-errcode-112-1037.md index 98b8f454c..bce0e7fae 100644 --- a/translations/et_EE/docs/troubleshooting/fix-errcode-112-1037.md +++ b/translations/et_EE/docs/troubleshooting/fix-errcode-112-1037.md @@ -25,14 +25,14 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a command prompt window. 1. Use the following command: `cd `. - - Example: cd C:\Users\username\Downloads. + - Example: cd C:\Users\username\Downloads. 1. Use the following command: `py -3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. @@ -45,15 +45,15 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a Terminal window. 1. Use the following command: `cd `. - - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. - - On Linux, the most common place to find your downloaded files is /home/username/Downloads. + - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. + - On Linux, the most common place to find your downloaded files is /home/username/Downloads. 1. Use the following command: `python3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. diff --git a/translations/et_EE/docs/user-guide/cbhc/browser-exploit.md b/translations/et_EE/docs/user-guide/cbhc/browser-exploit.md index 6e1553c47..aa6e836d9 100644 --- a/translations/et_EE/docs/user-guide/cbhc/browser-exploit.md +++ b/translations/et_EE/docs/user-guide/cbhc/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/et_EE/docs/user-guide/cbhc/nand-backup.md b/translations/et_EE/docs/user-guide/cbhc/nand-backup.md index e24bdaf1b..e324b7a81 100644 --- a/translations/et_EE/docs/user-guide/cbhc/nand-backup.md +++ b/translations/et_EE/docs/user-guide/cbhc/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/et_EE/docs/user-guide/haxchi/browser-exploit.md b/translations/et_EE/docs/user-guide/haxchi/browser-exploit.md index 826e038f3..8853ba483 100644 --- a/translations/et_EE/docs/user-guide/haxchi/browser-exploit.md +++ b/translations/et_EE/docs/user-guide/haxchi/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/et_EE/docs/user-guide/haxchi/nand-backup.md b/translations/et_EE/docs/user-guide/haxchi/nand-backup.md index 75200207a..9d6d642ad 100644 --- a/translations/et_EE/docs/user-guide/haxchi/nand-backup.md +++ b/translations/et_EE/docs/user-guide/haxchi/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/et_EE/docs/user-guide/mocha/indexiine/browser-exploit.md b/translations/et_EE/docs/user-guide/mocha/indexiine/browser-exploit.md index 83505773d..c14364eb9 100644 --- a/translations/et_EE/docs/user-guide/mocha/indexiine/browser-exploit.md +++ b/translations/et_EE/docs/user-guide/mocha/indexiine/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/et_EE/docs/user-guide/mocha/indexiine/browser-modding.md b/translations/et_EE/docs/user-guide/mocha/indexiine/browser-modding.md index 2aa249f4c..2bdfe4a37 100644 --- a/translations/et_EE/docs/user-guide/mocha/indexiine/browser-modding.md +++ b/translations/et_EE/docs/user-guide/mocha/indexiine/browser-modding.md @@ -12,7 +12,7 @@ Now that you have your NAND backup in case anything goes wrong later, you can in 1. Turn on your Wii U. 1. Launch the internet browser and open the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. 1. Navigate through the Homebrew Launcher and launch the `Indexiine Installer` app. 1. Press the A button to install Indexiine. 1. When the process completed, close the Homebrew Launcher to get back to your Wii U menu. diff --git a/translations/et_EE/docs/user-guide/mocha/indexiine/nand-backup.md b/translations/et_EE/docs/user-guide/mocha/indexiine/nand-backup.md index b0809c71c..88814cff8 100644 --- a/translations/et_EE/docs/user-guide/mocha/indexiine/nand-backup.md +++ b/translations/et_EE/docs/user-guide/mocha/indexiine/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/et_EE/docs/user-guide/mocha/online-exploit/browser-exploit.md b/translations/et_EE/docs/user-guide/mocha/online-exploit/browser-exploit.md index 8cbf2c754..30b7c94c5 100644 --- a/translations/et_EE/docs/user-guide/mocha/online-exploit/browser-exploit.md +++ b/translations/et_EE/docs/user-guide/mocha/online-exploit/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/et_EE/docs/user-guide/mocha/online-exploit/nand-backup.md b/translations/et_EE/docs/user-guide/mocha/online-exploit/nand-backup.md index 6513b4f51..adcbfaf3a 100644 --- a/translations/et_EE/docs/user-guide/mocha/online-exploit/nand-backup.md +++ b/translations/et_EE/docs/user-guide/mocha/online-exploit/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/et_EE/docs/vwii/vwii-modding.md b/translations/et_EE/docs/vwii/vwii-modding.md index c301b7b7f..64bdca1af 100644 --- a/translations/et_EE/docs/vwii/vwii-modding.md +++ b/translations/et_EE/docs/vwii/vwii-modding.md @@ -35,11 +35,11 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch the `Wii U NAND Dumper` application. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **optional** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **optional** + - Dump SLC: **optional** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **optional** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slccmpt.bin`, `otp.bin` and if you chose to go with a full backup, `seeprom.bin`, `slc.bin`, and `every mlc.bin.part` file to your computer. @@ -51,10 +51,10 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `A` to backup the Mii Channel and inject the Hackmii Installer then wait until it says Successfully injected wuphax!. - - You will be taken back to the Wii U Menu after a few seconds. + - You will be taken back to the Wii U Menu after a few seconds. 1. Launch vWii (the Wii Menu icon). 1. Launch the vWii Mii Channel. - - If Wuphax has successfully been injected, you will now see the scam warning screen. + - If Wuphax has successfully been injected, you will now see the scam warning screen. 1. Wait until you see `Press 1 to continue` and then press the `1` button. 1. Select `continue`, Install The Homebrew Channel and `Yes, continue`. 1. If The Homebrew Channel has successfully been installed, select `continue` and then `exit`. @@ -62,8 +62,8 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `B` to restore the Mii Channel then wait until it says Mii Channel restored!. - - You will be taken back to the Wii U Menu after a few seconds. - - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). + - You will be taken back to the Wii U Menu after a few seconds. + - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). ### Installing cIOSes @@ -75,19 +75,19 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch The Homebrew Channel. 1. Launch d2x cIOS Installer. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `56` - - Select cIOS slot: `249` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `56` + - Select cIOS slot: `249` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `57` - - Select cIOS slot: `250` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `57` + - Select cIOS slot: `250` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `58` - - Select cIOS slot: `251` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `58` + - Select cIOS slot: `251` 1. Press the `A` button to install. 1. Press the `B` button to exit. diff --git a/translations/fi_FI/docs/extras/block-updates.md b/translations/fi_FI/docs/extras/block-updates.md index 138f56793..6d1a63a79 100644 --- a/translations/fi_FI/docs/extras/block-updates.md +++ b/translations/fi_FI/docs/extras/block-updates.md @@ -30,8 +30,8 @@ Currently, two ways exist to block updates on the Wii U system: 1. Plug the SD Card into your Wii U console and power it on. 1. Enter the Wii U's system settings and navigate to `Internet > Connect to the Internet > Connection List >` `Your WiFi connection > Change Settings > DNS` and set the option to `Do not auto-obtain`. 1. You will be asked to input a primary and secondary DNS. Enter the following IP addresses: - - Primary DNS: 168.235.092.108 - - Secondary DNS: 081.004.127.020 DNS Block + - Primary DNS: 168.235.092.108 + - Secondary DNS: 081.004.127.020 DNS Block 1. Click on confirm. 1. You are now blocking updates. In order to access the eShop, run the NNUPatcher app from the Homebrew Launcher before launching the eShop. diff --git a/translations/fi_FI/docs/extras/configurable-payload.md b/translations/fi_FI/docs/extras/configurable-payload.md index 68e33baea..3068e9e1c 100644 --- a/translations/fi_FI/docs/extras/configurable-payload.md +++ b/translations/fi_FI/docs/extras/configurable-payload.md @@ -19,4 +19,4 @@ This payload is configurable, similar to Haxchi's configuration. This could be v 1. Extract the `Configurable_Payload.zip` file to the root of your SD Card. If it prompts you to overwrite the files on your SD Card, do so. 1. Place the SD Card into your Wii U and launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. If everything has been done correctly, you should be taken back to the Wii U Menu. Mocha has now been enabled and you can use the Homebrew Launcher Channel you installed earlier. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. diff --git a/translations/fi_FI/docs/extras/dump-games.md b/translations/fi_FI/docs/extras/dump-games.md index 63c7044ae..d7b48a17a 100644 --- a/translations/fi_FI/docs/extras/dump-games.md +++ b/translations/fi_FI/docs/extras/dump-games.md @@ -103,11 +103,11 @@ Dumping your Discs allows you to install a copy of your game to the system NAND/ 1. Plug in your USB device. The Wii U will ask you format it. Cancel with No! 1. Launch the Homebrew Launcher and start the MochaFAT32 app. 1. In the configuration menu, set the following settings: - - Config view mode: default - - Skip this menu on launch: on - - Don't relaunch OS: off - - Launch System Menu: on - - RedNAND: off + - Config view mode: default + - Skip this menu on launch: on + - Don't relaunch OS: off + - Launch System Menu: on + - RedNAND: off 1. Your console will load the Wii U menu with your USB device now replacing the SD Card. 1. Launch the Homebrew Launcher and open the disc2app app. 1. Eject any inserted game disc and press the A button to begin the dumping process. diff --git a/translations/fi_FI/docs/extras/dump-wii-games.md b/translations/fi_FI/docs/extras/dump-wii-games.md index db3692a09..1d98d4209 100644 --- a/translations/fi_FI/docs/extras/dump-wii-games.md +++ b/translations/fi_FI/docs/extras/dump-wii-games.md @@ -24,15 +24,15 @@ Dumping your Discs allows you to: play them on a Wii emulator (namely Dolphin), 1. Read the Disclaimer then press A. 1. Select Yes to enable Checksum Calculations. 1. Select either USB or Front SD depending on which device you want to use for the dumping process. - - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. + - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. 1. Press A to continue. 1. Select No on the screen that asks you to download redump.org DAT files. 1. Insert your disc then press A. 1. Go [on this page](https://wiki.dolphin-emu.org/index.php?title=Category:Dual_Layer_Disc_games) to see if your disc is dual-layered. 1. Set everything to match the following: - - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) - - Chunk Size: `Max` - - New device per chunk: `No` + - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) + - Chunk Size: `Max` + - New device per chunk: `No` 1. If you want to dump multiple discs, select Yes to remember your settings. If not, select No. ?> Be prepared to wait a while. The dumping process can take 30 minutes to 1 hour depending on your SD Card's speeds. diff --git a/translations/fi_FI/docs/troubleshooting/fix-errcode-112-1037.md b/translations/fi_FI/docs/troubleshooting/fix-errcode-112-1037.md index 98b8f454c..bce0e7fae 100644 --- a/translations/fi_FI/docs/troubleshooting/fix-errcode-112-1037.md +++ b/translations/fi_FI/docs/troubleshooting/fix-errcode-112-1037.md @@ -25,14 +25,14 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a command prompt window. 1. Use the following command: `cd `. - - Example: cd C:\Users\username\Downloads. + - Example: cd C:\Users\username\Downloads. 1. Use the following command: `py -3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. @@ -45,15 +45,15 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a Terminal window. 1. Use the following command: `cd `. - - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. - - On Linux, the most common place to find your downloaded files is /home/username/Downloads. + - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. + - On Linux, the most common place to find your downloaded files is /home/username/Downloads. 1. Use the following command: `python3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. diff --git a/translations/fi_FI/docs/user-guide/cbhc/browser-exploit.md b/translations/fi_FI/docs/user-guide/cbhc/browser-exploit.md index 6e1553c47..aa6e836d9 100644 --- a/translations/fi_FI/docs/user-guide/cbhc/browser-exploit.md +++ b/translations/fi_FI/docs/user-guide/cbhc/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/fi_FI/docs/user-guide/cbhc/nand-backup.md b/translations/fi_FI/docs/user-guide/cbhc/nand-backup.md index e24bdaf1b..e324b7a81 100644 --- a/translations/fi_FI/docs/user-guide/cbhc/nand-backup.md +++ b/translations/fi_FI/docs/user-guide/cbhc/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/fi_FI/docs/user-guide/haxchi/browser-exploit.md b/translations/fi_FI/docs/user-guide/haxchi/browser-exploit.md index 826e038f3..8853ba483 100644 --- a/translations/fi_FI/docs/user-guide/haxchi/browser-exploit.md +++ b/translations/fi_FI/docs/user-guide/haxchi/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/fi_FI/docs/user-guide/haxchi/nand-backup.md b/translations/fi_FI/docs/user-guide/haxchi/nand-backup.md index 75200207a..9d6d642ad 100644 --- a/translations/fi_FI/docs/user-guide/haxchi/nand-backup.md +++ b/translations/fi_FI/docs/user-guide/haxchi/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/fi_FI/docs/user-guide/mocha/indexiine/browser-exploit.md b/translations/fi_FI/docs/user-guide/mocha/indexiine/browser-exploit.md index 83505773d..c14364eb9 100644 --- a/translations/fi_FI/docs/user-guide/mocha/indexiine/browser-exploit.md +++ b/translations/fi_FI/docs/user-guide/mocha/indexiine/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/fi_FI/docs/user-guide/mocha/indexiine/browser-modding.md b/translations/fi_FI/docs/user-guide/mocha/indexiine/browser-modding.md index 2aa249f4c..2bdfe4a37 100644 --- a/translations/fi_FI/docs/user-guide/mocha/indexiine/browser-modding.md +++ b/translations/fi_FI/docs/user-guide/mocha/indexiine/browser-modding.md @@ -12,7 +12,7 @@ Now that you have your NAND backup in case anything goes wrong later, you can in 1. Turn on your Wii U. 1. Launch the internet browser and open the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. 1. Navigate through the Homebrew Launcher and launch the `Indexiine Installer` app. 1. Press the A button to install Indexiine. 1. When the process completed, close the Homebrew Launcher to get back to your Wii U menu. diff --git a/translations/fi_FI/docs/user-guide/mocha/indexiine/nand-backup.md b/translations/fi_FI/docs/user-guide/mocha/indexiine/nand-backup.md index b0809c71c..88814cff8 100644 --- a/translations/fi_FI/docs/user-guide/mocha/indexiine/nand-backup.md +++ b/translations/fi_FI/docs/user-guide/mocha/indexiine/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/fi_FI/docs/user-guide/mocha/online-exploit/browser-exploit.md b/translations/fi_FI/docs/user-guide/mocha/online-exploit/browser-exploit.md index 8cbf2c754..30b7c94c5 100644 --- a/translations/fi_FI/docs/user-guide/mocha/online-exploit/browser-exploit.md +++ b/translations/fi_FI/docs/user-guide/mocha/online-exploit/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/fi_FI/docs/user-guide/mocha/online-exploit/nand-backup.md b/translations/fi_FI/docs/user-guide/mocha/online-exploit/nand-backup.md index 6513b4f51..adcbfaf3a 100644 --- a/translations/fi_FI/docs/user-guide/mocha/online-exploit/nand-backup.md +++ b/translations/fi_FI/docs/user-guide/mocha/online-exploit/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/fi_FI/docs/vwii/vwii-modding.md b/translations/fi_FI/docs/vwii/vwii-modding.md index c301b7b7f..64bdca1af 100644 --- a/translations/fi_FI/docs/vwii/vwii-modding.md +++ b/translations/fi_FI/docs/vwii/vwii-modding.md @@ -35,11 +35,11 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch the `Wii U NAND Dumper` application. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **optional** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **optional** + - Dump SLC: **optional** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **optional** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slccmpt.bin`, `otp.bin` and if you chose to go with a full backup, `seeprom.bin`, `slc.bin`, and `every mlc.bin.part` file to your computer. @@ -51,10 +51,10 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `A` to backup the Mii Channel and inject the Hackmii Installer then wait until it says Successfully injected wuphax!. - - You will be taken back to the Wii U Menu after a few seconds. + - You will be taken back to the Wii U Menu after a few seconds. 1. Launch vWii (the Wii Menu icon). 1. Launch the vWii Mii Channel. - - If Wuphax has successfully been injected, you will now see the scam warning screen. + - If Wuphax has successfully been injected, you will now see the scam warning screen. 1. Wait until you see `Press 1 to continue` and then press the `1` button. 1. Select `continue`, Install The Homebrew Channel and `Yes, continue`. 1. If The Homebrew Channel has successfully been installed, select `continue` and then `exit`. @@ -62,8 +62,8 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `B` to restore the Mii Channel then wait until it says Mii Channel restored!. - - You will be taken back to the Wii U Menu after a few seconds. - - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). + - You will be taken back to the Wii U Menu after a few seconds. + - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). ### Installing cIOSes @@ -75,19 +75,19 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch The Homebrew Channel. 1. Launch d2x cIOS Installer. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `56` - - Select cIOS slot: `249` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `56` + - Select cIOS slot: `249` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `57` - - Select cIOS slot: `250` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `57` + - Select cIOS slot: `250` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `58` - - Select cIOS slot: `251` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `58` + - Select cIOS slot: `251` 1. Press the `A` button to install. 1. Press the `B` button to exit. diff --git a/translations/fr_FR/docs/extras/block-updates.md b/translations/fr_FR/docs/extras/block-updates.md index c5f9d15f1..3eec60026 100644 --- a/translations/fr_FR/docs/extras/block-updates.md +++ b/translations/fr_FR/docs/extras/block-updates.md @@ -30,8 +30,8 @@ Actuellement, il existe deux moyens de bloquer les mises à jour sur le système 1. Insérez la carte SD dans votre console Wii U et allumez-la. 1. Entrez les paramètres du système de la Wii U et naviguez jusqu'à `Internet > Connexion à Internet > Liste des connexions >` `Votre connexion WiFi > Modifiez les paramètres > DNS` et réglez l'option sur `Ne pas obtenir automatiquement`. 1. Il vous sera demandé de saisir un DNS primaire et un DNS secondaire. Entrez les adresses IP suivantes : - - DNS primaire: 168.235.092.108 - - DNS secondaire: 081.004.127.020 Blocage par DNS + - DNS primaire: 168.235.092.108 + - DNS secondaire: 081.004.127.020 Blocage par DNS 1. Cliquez sur OK. 1. Vous avez maintenant bloqué les mises à jour. Pour accéder à l'eShop, lancez l'application NNUPatcher à partir de l'Homebrew Launcher avant de lancer le Nintendo eShop. diff --git a/translations/fr_FR/docs/extras/configurable-payload.md b/translations/fr_FR/docs/extras/configurable-payload.md index d9a02b786..53e824c04 100644 --- a/translations/fr_FR/docs/extras/configurable-payload.md +++ b/translations/fr_FR/docs/extras/configurable-payload.md @@ -19,4 +19,4 @@ Ce payload est configurable, ce qui est similaire à la configuration d'Haxchi. 1. Copiez le contenu du fichier `Configurable_Payload.zip` vers la racine de votre carte SD. Si demandé, écrasez les fichiers déjà présents sur votre carte SD. 1. Insérez la carte SD dans votre Wii U et lancez le Navigateur Internet puis accédez au site Internet `wiiuexploit.xyz`. 1. Cliquez sur `Run Homebrew Launcher!`. Si tout a été fait correctement, vous devriez être ramené vers le Menu Wii U. Mocha a maintenant été activé et vous pouvez utiliser le Homebrew Launcher Channel que vous avez installé précédemment. - - Si votre Wii U reste coincée sur un écran blanc ou gelé, attendez quelques secondes. Si rien ne se passe, redémarrez la console, [réinitialisez les données de sauvegarde du navigateur](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) et réessayez. + - Si votre Wii U reste coincée sur un écran blanc ou gelé, attendez quelques secondes. Si rien ne se passe, redémarrez la console, [réinitialisez les données de sauvegarde du navigateur](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) et réessayez. diff --git a/translations/fr_FR/docs/extras/dump-games.md b/translations/fr_FR/docs/extras/dump-games.md index ea043ddf5..02e06d0a8 100644 --- a/translations/fr_FR/docs/extras/dump-games.md +++ b/translations/fr_FR/docs/extras/dump-games.md @@ -103,11 +103,11 @@ Dumper vos disques vous permet d'installer une copie de votre jeu sur la NAND / 1. Branchez votre périphérique USB. La Wii U vous demandera de le formater. Sélectionnez Annuler ! 1. Lancez l'Homebrew Launcher et lancez l'application MochaFAT32. 1. Dans le menu de configuration, définissez les paramètres suivants : - - Config view mode: default - - Skip this menu on launch: on - - Don't relaunch OS: off - - Launch System Menu: on - - RedNAND: off + - Config view mode: default + - Skip this menu on launch: on + - Don't relaunch OS: off + - Launch System Menu: on + - RedNAND: off 1. Votre console va charger le Menu Wii U avec votre périphérique USB qui remplace maintenant la carte SD. 1. Lancez l'Homebrew Launcher et lancez l'application disc2app. 1. Éjectez tout disque de jeu inséré et appuyez sur le bouton A pour commencer le processus de dumping. diff --git a/translations/fr_FR/docs/extras/dump-wii-games.md b/translations/fr_FR/docs/extras/dump-wii-games.md index 095af92f0..025159905 100644 --- a/translations/fr_FR/docs/extras/dump-wii-games.md +++ b/translations/fr_FR/docs/extras/dump-wii-games.md @@ -24,15 +24,15 @@ Dumper vos diques vous permet de : les lire sur un émulateur Wii (à savoir Dol 1. Lisez la clause de non-responsabilité puis appuyez sur A. 1. Sélectionnez Yes pour activer les calculs de la somme de contrôle. 1. Sélectionnez USB ou Front SD selon le périphérique que vous souhaitez utiliser pour le processus de dumping. - - Veuillez noter que l'appareil que vous choisirez doit être formaté soit en FAT32 soit en NTFS. + - Veuillez noter que l'appareil que vous choisirez doit être formaté soit en FAT32 soit en NTFS. 1. Appuyez sur A pour continuer. 1. Sélectionnez No sur l'écran qui vous demande de télécharger les fichiers DAT de redump.org. 1. Insérez votre disque puis appuyez sur A. 1. Allez [sur cette page](https://wiki.dolphin-emu.org/index.php?title=Category:Dual_Layer_Disc_games) pour voir si votre disque est à double couche. 1. Faites en sorte que ce qui suit soit identique à ce qui est affiché sur votre console : - - Dual Layer: `Yes/No` (Sélectionnez `Yes` si votre disque de jeu est de type double couche) - - Chunk Size: `Max` - - New device per chunk: `No` + - Dual Layer: `Yes/No` (Sélectionnez `Yes` si votre disque de jeu est de type double couche) + - Chunk Size: `Max` + - New device per chunk: `No` 1. Si vous souhaitez dumper plusieurs disques, sélectionnez Oui pour mémoriser vos paramètres. Si ce n'est pas le cas, sélectionnez Non. ?> Soyez prêts à attendre un moment. Le processus de dumping peut prendre de 30 minutes à 1 heure selon la vitesse de votre carte SD. diff --git a/translations/fr_FR/docs/troubleshooting/fix-errcode-112-1037.md b/translations/fr_FR/docs/troubleshooting/fix-errcode-112-1037.md index 92b83a618..48b330c1f 100644 --- a/translations/fr_FR/docs/troubleshooting/fix-errcode-112-1037.md +++ b/translations/fr_FR/docs/troubleshooting/fix-errcode-112-1037.md @@ -25,14 +25,14 @@ Cette page vous guidera tout au long du processus de correction du code d'erreur 1. Retournez au Menu Wii U. 1. Ouvrez une fenêtre d'invite de commande. 1. Utilisez la commande suivante : `cd `. - - Exemple: cd C:\Users\username\Downloads. + - Exemple: cd C:\Users\username\Downloads. 1. Utilisez la commande suivante : `py -3 -i wupclient.py`. 1. Entrez l'adresse IP de votre Wii U. - - Vous ne savez pas comment le trouver? Lisez [cela](find-wiiu-ip-address). + - Vous ne savez pas comment la trouver? Lisez [cela](find-wiiu-ip-address). 1. Utilisez la commande appropriée en fonction de la région de votre console : - - JPN : w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN : w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. Si la commande a fonctionné, vous obtiendrez la réponse suivante : `chmod returned 0x0`. 1. Le code d'erreur devrait maintenant avoir disparu. @@ -45,15 +45,15 @@ Cette page vous guidera tout au long du processus de correction du code d'erreur 1. Retournez au Menu Wii U. 1. Ouvrez une fenêtre du Terminal. 1. Utilisez la commande suivante : `cd `. - - Sur macOS, l'endroit le plus courant pour trouver vos fichiers téléchargés est /Users/username/Downloads. - - Sous Linux, l'endroit le plus courant pour trouver vos fichiers téléchargés est /home/username/Downloads. + - Sur macOS, l'endroit le plus courant pour trouver vos fichiers téléchargés est /Users/username/Downloads. + - Sous Linux, l'endroit le plus courant pour trouver vos fichiers téléchargés est /home/username/Downloads. 1. Utilisez la commande suivante : `python3 -i wupclient.py`. 1. Entrez l'adresse IP de votre Wii U. - - Vous ne savez pas comment le trouver? Lisez [cela](find-wiiu-ip-address). + - Vous ne savez pas comment la trouver? Lisez [cela](find-wiiu-ip-address). 1. Utilisez la commande appropriée en fonction de la région de votre console : - - JPN : w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN : w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. Si la commande a fonctionné, vous obtiendrez la réponse suivante : `chmod returned 0x0`. 1. Le code d'erreur devrait maintenant avoir disparu. diff --git a/translations/fr_FR/docs/user-guide/cbhc/browser-exploit.md b/translations/fr_FR/docs/user-guide/cbhc/browser-exploit.md index 2b704fa45..531a89b20 100644 --- a/translations/fr_FR/docs/user-guide/cbhc/browser-exploit.md +++ b/translations/fr_FR/docs/user-guide/cbhc/browser-exploit.md @@ -9,4 +9,4 @@ Pour installer le CFW, nous devons d'abord lancer le Homebrew Launcher à traver 1. Sortez la carte SD de votre ordinateur et insérez-la dans votre console Wii U. 1. Lancez le navigateur Internet et allez sur le site web `wiiuexploit.xyz`. 1. Cliquez sur `Run Homebrew Launcher!`. Votre console devrait lancer l'Homebrew Launcher. - - Si votre Wii U reste coincée sur un écran blanc ou gelé, attendez quelques secondes. Si rien ne se passe, redémarrez la console, [réinitialisez les données de sauvegarde du navigateur](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) et réessayez. \ No newline at end of file + - Si votre Wii U reste coincée sur un écran blanc ou gelé, attendez quelques secondes. Si rien ne se passe, redémarrez la console, [réinitialisez les données de sauvegarde du navigateur](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) et réessayez. \ No newline at end of file diff --git a/translations/fr_FR/docs/user-guide/cbhc/nand-backup.md b/translations/fr_FR/docs/user-guide/cbhc/nand-backup.md index 8480908f6..88c93c556 100644 --- a/translations/fr_FR/docs/user-guide/cbhc/nand-backup.md +++ b/translations/fr_FR/docs/user-guide/cbhc/nand-backup.md @@ -12,11 +12,11 @@ Au cas où quelque chose se passe mal dans le processus ultérieur et que votre 1. Naviguez à travers l'Homebrew Launcher et lancez l'application `Wii U NAND Dumper`. 1. Utilisez la croix directionnelle du Wii U GamePad pour entrer la configuration suivante : - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optionnel** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optionnel** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Appuyez sur le bouton A pour démarrer le processus de dumping. 1. Une fois le processus terminé, éteignez votre Wii U, retirez votre carte SD de la Wii U et insérez-la dans votre PC. 1. Pour vous assurer de ne pas perdre les fichiers, copiez `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` et si vous avez choisi de faire une sauvegarde complète, `chaque fichier mlc.bin.part` sur votre ordinateur. diff --git a/translations/fr_FR/docs/user-guide/haxchi/browser-exploit.md b/translations/fr_FR/docs/user-guide/haxchi/browser-exploit.md index 0b83d4bce..444a3624c 100644 --- a/translations/fr_FR/docs/user-guide/haxchi/browser-exploit.md +++ b/translations/fr_FR/docs/user-guide/haxchi/browser-exploit.md @@ -9,4 +9,4 @@ Pour installer le CFW, nous devons d'abord lancer le Homebrew Launcher à traver 1. Sortez la carte SD de votre ordinateur et insérez-la dans votre console Wii U. 1. Lancez le navigateur Internet et allez sur le site web `wiiuexploit.xyz`. 1. Cliquez sur `Run Homebrew Launcher!`. Votre console devrait lancer l'Homebrew Launcher. - - Si votre Wii U reste coincée sur un écran blanc ou gelé, attendez quelques secondes. Si rien ne se passe, redémarrez la console, [réinitialisez les données de sauvegarde du navigateur](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) et réessayez. \ No newline at end of file + - Si votre Wii U reste coincée sur un écran blanc ou gelé, attendez quelques secondes. Si rien ne se passe, redémarrez la console, [réinitialisez les données de sauvegarde du navigateur](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) et réessayez. \ No newline at end of file diff --git a/translations/fr_FR/docs/user-guide/haxchi/nand-backup.md b/translations/fr_FR/docs/user-guide/haxchi/nand-backup.md index 3b7a02384..5811bd5d0 100644 --- a/translations/fr_FR/docs/user-guide/haxchi/nand-backup.md +++ b/translations/fr_FR/docs/user-guide/haxchi/nand-backup.md @@ -12,11 +12,11 @@ Au cas où quelque chose se passe mal dans le processus ultérieur et que votre 1. Naviguez à travers l'Homebrew Launcher et lancez l'application `Wii U NAND Dumper`. 1. Utilisez la croix directionnelle du Wii U GamePad pour entrer la configuration suivante : - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optionnel** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optionnel** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Appuyez sur le bouton A pour démarrer le processus de dumping. 1. Une fois le processus terminé, éteignez votre Wii U, retirez votre carte SD de la Wii U et insérez-la dans votre PC. 1. Pour vous assurer de ne pas perdre les fichiers, copiez `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` et si vous avez choisi de faire une sauvegarde complète, `chaque fichier mlc.bin.part` sur votre ordinateur. diff --git a/translations/fr_FR/docs/user-guide/mocha/indexiine/browser-exploit.md b/translations/fr_FR/docs/user-guide/mocha/indexiine/browser-exploit.md index 0fe1a3df6..7daab0a32 100644 --- a/translations/fr_FR/docs/user-guide/mocha/indexiine/browser-exploit.md +++ b/translations/fr_FR/docs/user-guide/mocha/indexiine/browser-exploit.md @@ -9,4 +9,4 @@ Pour installer le CFW, nous devons d'abord lancer le Homebrew Launcher à traver 1. Sortez la carte SD de votre ordinateur et insérez-la dans votre console Wii U. 1. Lancez le navigateur Internet et allez sur le site web `wiiuexploit.xyz`. 1. Cliquez sur `Run Homebrew Launcher!`. Votre console devrait lancer l'Homebrew Launcher. - - Si votre Wii U reste coincée sur un écran blanc ou gelé, attendez quelques secondes. Si rien ne se passe, redémarrez la console, [réinitialisez les données de sauvegarde du navigateur](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) et réessayez. \ No newline at end of file + - Si votre Wii U reste coincée sur un écran blanc ou gelé, attendez quelques secondes. Si rien ne se passe, redémarrez la console, [réinitialisez les données de sauvegarde du navigateur](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) et réessayez. \ No newline at end of file diff --git a/translations/fr_FR/docs/user-guide/mocha/indexiine/browser-modding.md b/translations/fr_FR/docs/user-guide/mocha/indexiine/browser-modding.md index ad0a9371a..0723ff8d2 100644 --- a/translations/fr_FR/docs/user-guide/mocha/indexiine/browser-modding.md +++ b/translations/fr_FR/docs/user-guide/mocha/indexiine/browser-modding.md @@ -12,7 +12,7 @@ Maintenant que vous avez votre sauvegarde de la NAND au cas où quelque chose se 1. Allumez votre Wii U. 1. Launch the internet browser and open the website `wiiuexploit.xyz`. 1. Cliquez sur `Run Homebrew Launcher!`. Votre console devrait lancer l'Homebrew Launcher. - - Si votre Wii U reste coincée sur un écran blanc ou gelé, attendez quelques secondes. Si rien ne se passe, redémarrez la console, [réinitialisez les données de sauvegarde du navigateur](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) et réessayez. + - Si votre Wii U reste coincée sur un écran blanc ou gelé, attendez quelques secondes. Si rien ne se passe, redémarrez la console, [réinitialisez les données de sauvegarde du navigateur](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) et réessayez. 1. Naviguez à travers l'Homebrew Launcher et lancez l'application `Indexiine Installer`. 1. Appuyez sur le bouton A pour installer Indexiine. 1. Une fois le processus terminé, fermez l'Homebrew Launcher pour revenir au Menu Wii U. diff --git a/translations/fr_FR/docs/user-guide/mocha/indexiine/nand-backup.md b/translations/fr_FR/docs/user-guide/mocha/indexiine/nand-backup.md index 3e4932496..326b805b2 100644 --- a/translations/fr_FR/docs/user-guide/mocha/indexiine/nand-backup.md +++ b/translations/fr_FR/docs/user-guide/mocha/indexiine/nand-backup.md @@ -12,11 +12,11 @@ Au cas où quelque chose se passe mal dans le processus ultérieur et que votre 1. Naviguez à travers l'Homebrew Launcher et lancez l'application `Wii U NAND Dumper`. 1. Utilisez la croix directionnelle du Wii U GamePad pour entrer la configuration suivante : - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optionnel** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optionnel** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Appuyez sur le bouton A pour démarrer le processus de dumping. 1. Une fois le processus terminé, éteignez votre Wii U, retirez votre carte SD de la Wii U et insérez-la dans votre PC. 1. Pour vous assurer de ne pas perdre les fichiers, copiez `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` et si vous avez choisi de faire une sauvegarde complète, `chaque fichier mlc.bin.part` sur votre ordinateur. diff --git a/translations/fr_FR/docs/user-guide/mocha/online-exploit/browser-exploit.md b/translations/fr_FR/docs/user-guide/mocha/online-exploit/browser-exploit.md index 699a5aa7f..f92b081ba 100644 --- a/translations/fr_FR/docs/user-guide/mocha/online-exploit/browser-exploit.md +++ b/translations/fr_FR/docs/user-guide/mocha/online-exploit/browser-exploit.md @@ -9,4 +9,4 @@ Pour installer le CFW, nous devons d'abord lancer le Homebrew Launcher à traver 1. Sortez la carte SD de votre ordinateur et insérez-la dans votre console Wii U. 1. Lancez le navigateur Internet et allez sur le site web `wiiuexploit.xyz`. 1. Cliquez sur `Run Homebrew Launcher!`. Votre console devrait lancer l'Homebrew Launcher. - - Si votre Wii U reste coincée sur un écran blanc ou gelé, attendez quelques secondes. Si rien ne se passe, redémarrez la console, [réinitialisez les données de sauvegarde du navigateur](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) et réessayez. \ No newline at end of file + - Si votre Wii U reste coincée sur un écran blanc ou gelé, attendez quelques secondes. Si rien ne se passe, redémarrez la console, [réinitialisez les données de sauvegarde du navigateur](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) et réessayez. \ No newline at end of file diff --git a/translations/fr_FR/docs/user-guide/mocha/online-exploit/nand-backup.md b/translations/fr_FR/docs/user-guide/mocha/online-exploit/nand-backup.md index ddc26d1b5..1c6f95462 100644 --- a/translations/fr_FR/docs/user-guide/mocha/online-exploit/nand-backup.md +++ b/translations/fr_FR/docs/user-guide/mocha/online-exploit/nand-backup.md @@ -12,11 +12,11 @@ Au cas où quelque chose se passe mal dans le processus ultérieur et que votre 1. Naviguez à travers l'Homebrew Launcher et lancez l'application `Wii U NAND Dumper`. 1. Utilisez la croix directionnelle du Wii U GamePad pour entrer la configuration suivante : - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optionnel** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optionnel** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Appuyez sur le bouton A pour démarrer le processus de dumping. 1. Une fois le processus terminé, éteignez votre Wii U, retirez votre carte SD de la Wii U et insérez-la dans votre PC. 1. Pour vous assurer de ne pas perdre les fichiers, copiez `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` et si vous avez choisi de faire une sauvegarde complète, `chaque fichier mlc.bin.part` sur votre ordinateur. diff --git a/translations/fr_FR/docs/vwii/vwii-modding.md b/translations/fr_FR/docs/vwii/vwii-modding.md index 0c4efe12b..b929c9e04 100644 --- a/translations/fr_FR/docs/vwii/vwii-modding.md +++ b/translations/fr_FR/docs/vwii/vwii-modding.md @@ -35,11 +35,11 @@ Au cas où quelque chose se passe mal dans le processus ultérieur et que votre 1. Lancez l'[Homebrew Launcher](vwii/browser-exploit). 1. Lancez l'application `Wii U NAND Dumper`. 1. Utilisez la croix directionnelle du Wii U GamePad pour entrer la configuration suivante : - - Dump SLC: **optionnel** - - Dump SLCCMPT: **yes** - - Dump MLC: **optionnel** - - Dump OTP: **yes** - - Dump SEEPROM: **optionnel** + - Dump SLC: **optionnel** + - Dump SLCCMPT: **yes** + - Dump MLC: **optionnel** + - Dump OTP: **yes** + - Dump SEEPROM: **optionnel** 1. Appuyez sur le bouton A pour démarrer le processus de dumping. 1. Une fois le processus terminé, éteignez votre Wii U, retirez votre carte SD de la Wii U et insérez-la dans votre PC. 1. Pour vous assurer de ne pas perdre les fichiers, copiez `slccmpt.bin`, `otp.bin` et si vous avez choisi de faire une sauvegarde complète, `seeprom.bin`, `slc.bin`, et `chaque fichier mlc.bin.part` sur votre ordinateur. @@ -51,10 +51,10 @@ Au cas où quelque chose se passe mal dans le processus ultérieur et que votre 1. Lancez l'[Homebrew Launcher](vwii/browser-exploit). 1. Lancez Wuphax. 1. Appuyez sur `A` pour sauvegarder la Chaîne Mii et injecter Hackmii Installer puis attendez qu'il affiche Successfully injected wuphax!. - - Vous serez ramené au Menu Wii U après quelques secondes. + - Vous serez ramené au Menu Wii U après quelques secondes. 1. Lancez la vWii (l'icône du Menu Wii). 1. Lancez la Chaîne Mii de la vWii. - - Si Wuphax a été injecté avec succès, vous verrez maintenant un écran d'avertissement. + - Si Wuphax a été injecté avec succès, vous verrez maintenant un écran d'avertissement. 1. Attendez jusqu'à ce que voyiez `Press 1 to continue` puis appuyez sur le bouton `1`. 1. Sélectionnez `continue`, Install The Homebrew Channel et `Yes, continue`. 1. Si l'Homebrew Channel a été installé avec succès, sélectionnez `continue` puis `exit`. @@ -62,8 +62,8 @@ Au cas où quelque chose se passe mal dans le processus ultérieur et que votre 1. Lancez l'[Homebrew Launcher](vwii/browser-exploit). 1. Lancez Wuphax. 1. Appuyez sur `B` pour restaurer la Chaîne Mii, puis attendez que la console affiche Mii Channel restored!. - - Vous serez ramené au Menu Wii U après quelques secondes. - - Si pour une raison quelconque, vous ne pouvez pas restaurer votre sauvegarde, vous devrez [réinstaller votre Chaîne Mii](recover-vwii-ioses-channels). + - Vous serez ramené au Menu Wii U après quelques secondes. + - Si pour une raison quelconque, vous ne pouvez pas restaurer votre sauvegarde, vous devrez [réinstaller votre Chaîne Mii](recover-vwii-ioses-channels). ### Installation des cIOS @@ -75,19 +75,19 @@ Au cas où quelque chose se passe mal dans le processus ultérieur et que votre 1. Lancez The Homebrew Channel. 1. Lancez d2x cIOS Installer. 1. Faites en sorte que ce qui suit soit identique à ce qui est affiché sur votre console: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `56` - - Select cIOS slot: `249` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `56` + - Select cIOS slot: `249` 1. Appuyez sur le bouton `A` pour installer. 1. Faites en sorte que ce qui suit soit identique à ce qui est affiché sur votre console: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `57` - - Select cIOS slot: `250` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `57` + - Select cIOS slot: `250` 1. Appuyez sur le bouton `A` pour installer. 1. Faites en sorte que ce qui suit soit identique à ce qui est affiché sur votre console: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `58` - - Select cIOS slot: `251` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `58` + - Select cIOS slot: `251` 1. Appuyez sur le bouton `A` pour installer. 1. Appuyez sur le bouton `B` pour quitter. diff --git a/translations/he_IL/docs/extras/block-updates.md b/translations/he_IL/docs/extras/block-updates.md index 138f56793..6d1a63a79 100644 --- a/translations/he_IL/docs/extras/block-updates.md +++ b/translations/he_IL/docs/extras/block-updates.md @@ -30,8 +30,8 @@ Currently, two ways exist to block updates on the Wii U system: 1. Plug the SD Card into your Wii U console and power it on. 1. Enter the Wii U's system settings and navigate to `Internet > Connect to the Internet > Connection List >` `Your WiFi connection > Change Settings > DNS` and set the option to `Do not auto-obtain`. 1. You will be asked to input a primary and secondary DNS. Enter the following IP addresses: - - Primary DNS: 168.235.092.108 - - Secondary DNS: 081.004.127.020 DNS Block + - Primary DNS: 168.235.092.108 + - Secondary DNS: 081.004.127.020 DNS Block 1. Click on confirm. 1. You are now blocking updates. In order to access the eShop, run the NNUPatcher app from the Homebrew Launcher before launching the eShop. diff --git a/translations/he_IL/docs/extras/configurable-payload.md b/translations/he_IL/docs/extras/configurable-payload.md index 68e33baea..3068e9e1c 100644 --- a/translations/he_IL/docs/extras/configurable-payload.md +++ b/translations/he_IL/docs/extras/configurable-payload.md @@ -19,4 +19,4 @@ This payload is configurable, similar to Haxchi's configuration. This could be v 1. Extract the `Configurable_Payload.zip` file to the root of your SD Card. If it prompts you to overwrite the files on your SD Card, do so. 1. Place the SD Card into your Wii U and launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. If everything has been done correctly, you should be taken back to the Wii U Menu. Mocha has now been enabled and you can use the Homebrew Launcher Channel you installed earlier. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. diff --git a/translations/he_IL/docs/extras/dump-games.md b/translations/he_IL/docs/extras/dump-games.md index 63c7044ae..d7b48a17a 100644 --- a/translations/he_IL/docs/extras/dump-games.md +++ b/translations/he_IL/docs/extras/dump-games.md @@ -103,11 +103,11 @@ Dumping your Discs allows you to install a copy of your game to the system NAND/ 1. Plug in your USB device. The Wii U will ask you format it. Cancel with No! 1. Launch the Homebrew Launcher and start the MochaFAT32 app. 1. In the configuration menu, set the following settings: - - Config view mode: default - - Skip this menu on launch: on - - Don't relaunch OS: off - - Launch System Menu: on - - RedNAND: off + - Config view mode: default + - Skip this menu on launch: on + - Don't relaunch OS: off + - Launch System Menu: on + - RedNAND: off 1. Your console will load the Wii U menu with your USB device now replacing the SD Card. 1. Launch the Homebrew Launcher and open the disc2app app. 1. Eject any inserted game disc and press the A button to begin the dumping process. diff --git a/translations/he_IL/docs/extras/dump-wii-games.md b/translations/he_IL/docs/extras/dump-wii-games.md index db3692a09..1d98d4209 100644 --- a/translations/he_IL/docs/extras/dump-wii-games.md +++ b/translations/he_IL/docs/extras/dump-wii-games.md @@ -24,15 +24,15 @@ Dumping your Discs allows you to: play them on a Wii emulator (namely Dolphin), 1. Read the Disclaimer then press A. 1. Select Yes to enable Checksum Calculations. 1. Select either USB or Front SD depending on which device you want to use for the dumping process. - - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. + - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. 1. Press A to continue. 1. Select No on the screen that asks you to download redump.org DAT files. 1. Insert your disc then press A. 1. Go [on this page](https://wiki.dolphin-emu.org/index.php?title=Category:Dual_Layer_Disc_games) to see if your disc is dual-layered. 1. Set everything to match the following: - - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) - - Chunk Size: `Max` - - New device per chunk: `No` + - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) + - Chunk Size: `Max` + - New device per chunk: `No` 1. If you want to dump multiple discs, select Yes to remember your settings. If not, select No. ?> Be prepared to wait a while. The dumping process can take 30 minutes to 1 hour depending on your SD Card's speeds. diff --git a/translations/he_IL/docs/troubleshooting/fix-errcode-112-1037.md b/translations/he_IL/docs/troubleshooting/fix-errcode-112-1037.md index 98b8f454c..bce0e7fae 100644 --- a/translations/he_IL/docs/troubleshooting/fix-errcode-112-1037.md +++ b/translations/he_IL/docs/troubleshooting/fix-errcode-112-1037.md @@ -25,14 +25,14 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a command prompt window. 1. Use the following command: `cd `. - - Example: cd C:\Users\username\Downloads. + - Example: cd C:\Users\username\Downloads. 1. Use the following command: `py -3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. @@ -45,15 +45,15 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a Terminal window. 1. Use the following command: `cd `. - - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. - - On Linux, the most common place to find your downloaded files is /home/username/Downloads. + - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. + - On Linux, the most common place to find your downloaded files is /home/username/Downloads. 1. Use the following command: `python3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. diff --git a/translations/he_IL/docs/user-guide/cbhc/browser-exploit.md b/translations/he_IL/docs/user-guide/cbhc/browser-exploit.md index 6e1553c47..aa6e836d9 100644 --- a/translations/he_IL/docs/user-guide/cbhc/browser-exploit.md +++ b/translations/he_IL/docs/user-guide/cbhc/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/he_IL/docs/user-guide/cbhc/nand-backup.md b/translations/he_IL/docs/user-guide/cbhc/nand-backup.md index e24bdaf1b..e324b7a81 100644 --- a/translations/he_IL/docs/user-guide/cbhc/nand-backup.md +++ b/translations/he_IL/docs/user-guide/cbhc/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/he_IL/docs/user-guide/haxchi/browser-exploit.md b/translations/he_IL/docs/user-guide/haxchi/browser-exploit.md index 826e038f3..8853ba483 100644 --- a/translations/he_IL/docs/user-guide/haxchi/browser-exploit.md +++ b/translations/he_IL/docs/user-guide/haxchi/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/he_IL/docs/user-guide/haxchi/nand-backup.md b/translations/he_IL/docs/user-guide/haxchi/nand-backup.md index 75200207a..9d6d642ad 100644 --- a/translations/he_IL/docs/user-guide/haxchi/nand-backup.md +++ b/translations/he_IL/docs/user-guide/haxchi/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/he_IL/docs/user-guide/mocha/indexiine/browser-exploit.md b/translations/he_IL/docs/user-guide/mocha/indexiine/browser-exploit.md index 83505773d..c14364eb9 100644 --- a/translations/he_IL/docs/user-guide/mocha/indexiine/browser-exploit.md +++ b/translations/he_IL/docs/user-guide/mocha/indexiine/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/he_IL/docs/user-guide/mocha/indexiine/browser-modding.md b/translations/he_IL/docs/user-guide/mocha/indexiine/browser-modding.md index 2aa249f4c..2bdfe4a37 100644 --- a/translations/he_IL/docs/user-guide/mocha/indexiine/browser-modding.md +++ b/translations/he_IL/docs/user-guide/mocha/indexiine/browser-modding.md @@ -12,7 +12,7 @@ Now that you have your NAND backup in case anything goes wrong later, you can in 1. Turn on your Wii U. 1. Launch the internet browser and open the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. 1. Navigate through the Homebrew Launcher and launch the `Indexiine Installer` app. 1. Press the A button to install Indexiine. 1. When the process completed, close the Homebrew Launcher to get back to your Wii U menu. diff --git a/translations/he_IL/docs/user-guide/mocha/indexiine/nand-backup.md b/translations/he_IL/docs/user-guide/mocha/indexiine/nand-backup.md index b0809c71c..88814cff8 100644 --- a/translations/he_IL/docs/user-guide/mocha/indexiine/nand-backup.md +++ b/translations/he_IL/docs/user-guide/mocha/indexiine/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/he_IL/docs/user-guide/mocha/online-exploit/browser-exploit.md b/translations/he_IL/docs/user-guide/mocha/online-exploit/browser-exploit.md index 8cbf2c754..30b7c94c5 100644 --- a/translations/he_IL/docs/user-guide/mocha/online-exploit/browser-exploit.md +++ b/translations/he_IL/docs/user-guide/mocha/online-exploit/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/he_IL/docs/user-guide/mocha/online-exploit/nand-backup.md b/translations/he_IL/docs/user-guide/mocha/online-exploit/nand-backup.md index 6513b4f51..adcbfaf3a 100644 --- a/translations/he_IL/docs/user-guide/mocha/online-exploit/nand-backup.md +++ b/translations/he_IL/docs/user-guide/mocha/online-exploit/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/he_IL/docs/vwii/vwii-modding.md b/translations/he_IL/docs/vwii/vwii-modding.md index c301b7b7f..64bdca1af 100644 --- a/translations/he_IL/docs/vwii/vwii-modding.md +++ b/translations/he_IL/docs/vwii/vwii-modding.md @@ -35,11 +35,11 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch the `Wii U NAND Dumper` application. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **optional** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **optional** + - Dump SLC: **optional** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **optional** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slccmpt.bin`, `otp.bin` and if you chose to go with a full backup, `seeprom.bin`, `slc.bin`, and `every mlc.bin.part` file to your computer. @@ -51,10 +51,10 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `A` to backup the Mii Channel and inject the Hackmii Installer then wait until it says Successfully injected wuphax!. - - You will be taken back to the Wii U Menu after a few seconds. + - You will be taken back to the Wii U Menu after a few seconds. 1. Launch vWii (the Wii Menu icon). 1. Launch the vWii Mii Channel. - - If Wuphax has successfully been injected, you will now see the scam warning screen. + - If Wuphax has successfully been injected, you will now see the scam warning screen. 1. Wait until you see `Press 1 to continue` and then press the `1` button. 1. Select `continue`, Install The Homebrew Channel and `Yes, continue`. 1. If The Homebrew Channel has successfully been installed, select `continue` and then `exit`. @@ -62,8 +62,8 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `B` to restore the Mii Channel then wait until it says Mii Channel restored!. - - You will be taken back to the Wii U Menu after a few seconds. - - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). + - You will be taken back to the Wii U Menu after a few seconds. + - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). ### Installing cIOSes @@ -75,19 +75,19 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch The Homebrew Channel. 1. Launch d2x cIOS Installer. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `56` - - Select cIOS slot: `249` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `56` + - Select cIOS slot: `249` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `57` - - Select cIOS slot: `250` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `57` + - Select cIOS slot: `250` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `58` - - Select cIOS slot: `251` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `58` + - Select cIOS slot: `251` 1. Press the `A` button to install. 1. Press the `B` button to exit. diff --git a/translations/hr_HR/docs/extras/block-updates.md b/translations/hr_HR/docs/extras/block-updates.md index 138f56793..6d1a63a79 100644 --- a/translations/hr_HR/docs/extras/block-updates.md +++ b/translations/hr_HR/docs/extras/block-updates.md @@ -30,8 +30,8 @@ Currently, two ways exist to block updates on the Wii U system: 1. Plug the SD Card into your Wii U console and power it on. 1. Enter the Wii U's system settings and navigate to `Internet > Connect to the Internet > Connection List >` `Your WiFi connection > Change Settings > DNS` and set the option to `Do not auto-obtain`. 1. You will be asked to input a primary and secondary DNS. Enter the following IP addresses: - - Primary DNS: 168.235.092.108 - - Secondary DNS: 081.004.127.020 DNS Block + - Primary DNS: 168.235.092.108 + - Secondary DNS: 081.004.127.020 DNS Block 1. Click on confirm. 1. You are now blocking updates. In order to access the eShop, run the NNUPatcher app from the Homebrew Launcher before launching the eShop. diff --git a/translations/hr_HR/docs/extras/configurable-payload.md b/translations/hr_HR/docs/extras/configurable-payload.md index 68e33baea..3068e9e1c 100644 --- a/translations/hr_HR/docs/extras/configurable-payload.md +++ b/translations/hr_HR/docs/extras/configurable-payload.md @@ -19,4 +19,4 @@ This payload is configurable, similar to Haxchi's configuration. This could be v 1. Extract the `Configurable_Payload.zip` file to the root of your SD Card. If it prompts you to overwrite the files on your SD Card, do so. 1. Place the SD Card into your Wii U and launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. If everything has been done correctly, you should be taken back to the Wii U Menu. Mocha has now been enabled and you can use the Homebrew Launcher Channel you installed earlier. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. diff --git a/translations/hr_HR/docs/extras/dump-games.md b/translations/hr_HR/docs/extras/dump-games.md index 63c7044ae..d7b48a17a 100644 --- a/translations/hr_HR/docs/extras/dump-games.md +++ b/translations/hr_HR/docs/extras/dump-games.md @@ -103,11 +103,11 @@ Dumping your Discs allows you to install a copy of your game to the system NAND/ 1. Plug in your USB device. The Wii U will ask you format it. Cancel with No! 1. Launch the Homebrew Launcher and start the MochaFAT32 app. 1. In the configuration menu, set the following settings: - - Config view mode: default - - Skip this menu on launch: on - - Don't relaunch OS: off - - Launch System Menu: on - - RedNAND: off + - Config view mode: default + - Skip this menu on launch: on + - Don't relaunch OS: off + - Launch System Menu: on + - RedNAND: off 1. Your console will load the Wii U menu with your USB device now replacing the SD Card. 1. Launch the Homebrew Launcher and open the disc2app app. 1. Eject any inserted game disc and press the A button to begin the dumping process. diff --git a/translations/hr_HR/docs/extras/dump-wii-games.md b/translations/hr_HR/docs/extras/dump-wii-games.md index db3692a09..1d98d4209 100644 --- a/translations/hr_HR/docs/extras/dump-wii-games.md +++ b/translations/hr_HR/docs/extras/dump-wii-games.md @@ -24,15 +24,15 @@ Dumping your Discs allows you to: play them on a Wii emulator (namely Dolphin), 1. Read the Disclaimer then press A. 1. Select Yes to enable Checksum Calculations. 1. Select either USB or Front SD depending on which device you want to use for the dumping process. - - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. + - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. 1. Press A to continue. 1. Select No on the screen that asks you to download redump.org DAT files. 1. Insert your disc then press A. 1. Go [on this page](https://wiki.dolphin-emu.org/index.php?title=Category:Dual_Layer_Disc_games) to see if your disc is dual-layered. 1. Set everything to match the following: - - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) - - Chunk Size: `Max` - - New device per chunk: `No` + - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) + - Chunk Size: `Max` + - New device per chunk: `No` 1. If you want to dump multiple discs, select Yes to remember your settings. If not, select No. ?> Be prepared to wait a while. The dumping process can take 30 minutes to 1 hour depending on your SD Card's speeds. diff --git a/translations/hr_HR/docs/troubleshooting/fix-errcode-112-1037.md b/translations/hr_HR/docs/troubleshooting/fix-errcode-112-1037.md index 98b8f454c..bce0e7fae 100644 --- a/translations/hr_HR/docs/troubleshooting/fix-errcode-112-1037.md +++ b/translations/hr_HR/docs/troubleshooting/fix-errcode-112-1037.md @@ -25,14 +25,14 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a command prompt window. 1. Use the following command: `cd `. - - Example: cd C:\Users\username\Downloads. + - Example: cd C:\Users\username\Downloads. 1. Use the following command: `py -3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. @@ -45,15 +45,15 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a Terminal window. 1. Use the following command: `cd `. - - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. - - On Linux, the most common place to find your downloaded files is /home/username/Downloads. + - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. + - On Linux, the most common place to find your downloaded files is /home/username/Downloads. 1. Use the following command: `python3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. diff --git a/translations/hr_HR/docs/user-guide/cbhc/browser-exploit.md b/translations/hr_HR/docs/user-guide/cbhc/browser-exploit.md index 6e1553c47..aa6e836d9 100644 --- a/translations/hr_HR/docs/user-guide/cbhc/browser-exploit.md +++ b/translations/hr_HR/docs/user-guide/cbhc/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/hr_HR/docs/user-guide/cbhc/nand-backup.md b/translations/hr_HR/docs/user-guide/cbhc/nand-backup.md index e24bdaf1b..e324b7a81 100644 --- a/translations/hr_HR/docs/user-guide/cbhc/nand-backup.md +++ b/translations/hr_HR/docs/user-guide/cbhc/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/hr_HR/docs/user-guide/haxchi/browser-exploit.md b/translations/hr_HR/docs/user-guide/haxchi/browser-exploit.md index 826e038f3..8853ba483 100644 --- a/translations/hr_HR/docs/user-guide/haxchi/browser-exploit.md +++ b/translations/hr_HR/docs/user-guide/haxchi/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/hr_HR/docs/user-guide/haxchi/nand-backup.md b/translations/hr_HR/docs/user-guide/haxchi/nand-backup.md index 75200207a..9d6d642ad 100644 --- a/translations/hr_HR/docs/user-guide/haxchi/nand-backup.md +++ b/translations/hr_HR/docs/user-guide/haxchi/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/hr_HR/docs/user-guide/mocha/indexiine/browser-exploit.md b/translations/hr_HR/docs/user-guide/mocha/indexiine/browser-exploit.md index 83505773d..c14364eb9 100644 --- a/translations/hr_HR/docs/user-guide/mocha/indexiine/browser-exploit.md +++ b/translations/hr_HR/docs/user-guide/mocha/indexiine/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/hr_HR/docs/user-guide/mocha/indexiine/browser-modding.md b/translations/hr_HR/docs/user-guide/mocha/indexiine/browser-modding.md index 2aa249f4c..2bdfe4a37 100644 --- a/translations/hr_HR/docs/user-guide/mocha/indexiine/browser-modding.md +++ b/translations/hr_HR/docs/user-guide/mocha/indexiine/browser-modding.md @@ -12,7 +12,7 @@ Now that you have your NAND backup in case anything goes wrong later, you can in 1. Turn on your Wii U. 1. Launch the internet browser and open the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. 1. Navigate through the Homebrew Launcher and launch the `Indexiine Installer` app. 1. Press the A button to install Indexiine. 1. When the process completed, close the Homebrew Launcher to get back to your Wii U menu. diff --git a/translations/hr_HR/docs/user-guide/mocha/indexiine/nand-backup.md b/translations/hr_HR/docs/user-guide/mocha/indexiine/nand-backup.md index b0809c71c..88814cff8 100644 --- a/translations/hr_HR/docs/user-guide/mocha/indexiine/nand-backup.md +++ b/translations/hr_HR/docs/user-guide/mocha/indexiine/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/hr_HR/docs/user-guide/mocha/online-exploit/browser-exploit.md b/translations/hr_HR/docs/user-guide/mocha/online-exploit/browser-exploit.md index 8cbf2c754..30b7c94c5 100644 --- a/translations/hr_HR/docs/user-guide/mocha/online-exploit/browser-exploit.md +++ b/translations/hr_HR/docs/user-guide/mocha/online-exploit/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/hr_HR/docs/user-guide/mocha/online-exploit/nand-backup.md b/translations/hr_HR/docs/user-guide/mocha/online-exploit/nand-backup.md index 6513b4f51..adcbfaf3a 100644 --- a/translations/hr_HR/docs/user-guide/mocha/online-exploit/nand-backup.md +++ b/translations/hr_HR/docs/user-guide/mocha/online-exploit/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/hr_HR/docs/vwii/vwii-modding.md b/translations/hr_HR/docs/vwii/vwii-modding.md index c301b7b7f..64bdca1af 100644 --- a/translations/hr_HR/docs/vwii/vwii-modding.md +++ b/translations/hr_HR/docs/vwii/vwii-modding.md @@ -35,11 +35,11 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch the `Wii U NAND Dumper` application. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **optional** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **optional** + - Dump SLC: **optional** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **optional** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slccmpt.bin`, `otp.bin` and if you chose to go with a full backup, `seeprom.bin`, `slc.bin`, and `every mlc.bin.part` file to your computer. @@ -51,10 +51,10 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `A` to backup the Mii Channel and inject the Hackmii Installer then wait until it says Successfully injected wuphax!. - - You will be taken back to the Wii U Menu after a few seconds. + - You will be taken back to the Wii U Menu after a few seconds. 1. Launch vWii (the Wii Menu icon). 1. Launch the vWii Mii Channel. - - If Wuphax has successfully been injected, you will now see the scam warning screen. + - If Wuphax has successfully been injected, you will now see the scam warning screen. 1. Wait until you see `Press 1 to continue` and then press the `1` button. 1. Select `continue`, Install The Homebrew Channel and `Yes, continue`. 1. If The Homebrew Channel has successfully been installed, select `continue` and then `exit`. @@ -62,8 +62,8 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `B` to restore the Mii Channel then wait until it says Mii Channel restored!. - - You will be taken back to the Wii U Menu after a few seconds. - - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). + - You will be taken back to the Wii U Menu after a few seconds. + - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). ### Installing cIOSes @@ -75,19 +75,19 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch The Homebrew Channel. 1. Launch d2x cIOS Installer. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `56` - - Select cIOS slot: `249` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `56` + - Select cIOS slot: `249` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `57` - - Select cIOS slot: `250` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `57` + - Select cIOS slot: `250` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `58` - - Select cIOS slot: `251` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `58` + - Select cIOS slot: `251` 1. Press the `A` button to install. 1. Press the `B` button to exit. diff --git a/translations/hu_HU/docs/extras/block-updates.md b/translations/hu_HU/docs/extras/block-updates.md index 138f56793..6d1a63a79 100644 --- a/translations/hu_HU/docs/extras/block-updates.md +++ b/translations/hu_HU/docs/extras/block-updates.md @@ -30,8 +30,8 @@ Currently, two ways exist to block updates on the Wii U system: 1. Plug the SD Card into your Wii U console and power it on. 1. Enter the Wii U's system settings and navigate to `Internet > Connect to the Internet > Connection List >` `Your WiFi connection > Change Settings > DNS` and set the option to `Do not auto-obtain`. 1. You will be asked to input a primary and secondary DNS. Enter the following IP addresses: - - Primary DNS: 168.235.092.108 - - Secondary DNS: 081.004.127.020 DNS Block + - Primary DNS: 168.235.092.108 + - Secondary DNS: 081.004.127.020 DNS Block 1. Click on confirm. 1. You are now blocking updates. In order to access the eShop, run the NNUPatcher app from the Homebrew Launcher before launching the eShop. diff --git a/translations/hu_HU/docs/extras/configurable-payload.md b/translations/hu_HU/docs/extras/configurable-payload.md index 68e33baea..3068e9e1c 100644 --- a/translations/hu_HU/docs/extras/configurable-payload.md +++ b/translations/hu_HU/docs/extras/configurable-payload.md @@ -19,4 +19,4 @@ This payload is configurable, similar to Haxchi's configuration. This could be v 1. Extract the `Configurable_Payload.zip` file to the root of your SD Card. If it prompts you to overwrite the files on your SD Card, do so. 1. Place the SD Card into your Wii U and launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. If everything has been done correctly, you should be taken back to the Wii U Menu. Mocha has now been enabled and you can use the Homebrew Launcher Channel you installed earlier. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. diff --git a/translations/hu_HU/docs/extras/dump-games.md b/translations/hu_HU/docs/extras/dump-games.md index 63c7044ae..d7b48a17a 100644 --- a/translations/hu_HU/docs/extras/dump-games.md +++ b/translations/hu_HU/docs/extras/dump-games.md @@ -103,11 +103,11 @@ Dumping your Discs allows you to install a copy of your game to the system NAND/ 1. Plug in your USB device. The Wii U will ask you format it. Cancel with No! 1. Launch the Homebrew Launcher and start the MochaFAT32 app. 1. In the configuration menu, set the following settings: - - Config view mode: default - - Skip this menu on launch: on - - Don't relaunch OS: off - - Launch System Menu: on - - RedNAND: off + - Config view mode: default + - Skip this menu on launch: on + - Don't relaunch OS: off + - Launch System Menu: on + - RedNAND: off 1. Your console will load the Wii U menu with your USB device now replacing the SD Card. 1. Launch the Homebrew Launcher and open the disc2app app. 1. Eject any inserted game disc and press the A button to begin the dumping process. diff --git a/translations/hu_HU/docs/extras/dump-wii-games.md b/translations/hu_HU/docs/extras/dump-wii-games.md index db3692a09..1d98d4209 100644 --- a/translations/hu_HU/docs/extras/dump-wii-games.md +++ b/translations/hu_HU/docs/extras/dump-wii-games.md @@ -24,15 +24,15 @@ Dumping your Discs allows you to: play them on a Wii emulator (namely Dolphin), 1. Read the Disclaimer then press A. 1. Select Yes to enable Checksum Calculations. 1. Select either USB or Front SD depending on which device you want to use for the dumping process. - - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. + - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. 1. Press A to continue. 1. Select No on the screen that asks you to download redump.org DAT files. 1. Insert your disc then press A. 1. Go [on this page](https://wiki.dolphin-emu.org/index.php?title=Category:Dual_Layer_Disc_games) to see if your disc is dual-layered. 1. Set everything to match the following: - - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) - - Chunk Size: `Max` - - New device per chunk: `No` + - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) + - Chunk Size: `Max` + - New device per chunk: `No` 1. If you want to dump multiple discs, select Yes to remember your settings. If not, select No. ?> Be prepared to wait a while. The dumping process can take 30 minutes to 1 hour depending on your SD Card's speeds. diff --git a/translations/hu_HU/docs/troubleshooting/fix-errcode-112-1037.md b/translations/hu_HU/docs/troubleshooting/fix-errcode-112-1037.md index 98b8f454c..bce0e7fae 100644 --- a/translations/hu_HU/docs/troubleshooting/fix-errcode-112-1037.md +++ b/translations/hu_HU/docs/troubleshooting/fix-errcode-112-1037.md @@ -25,14 +25,14 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a command prompt window. 1. Use the following command: `cd `. - - Example: cd C:\Users\username\Downloads. + - Example: cd C:\Users\username\Downloads. 1. Use the following command: `py -3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. @@ -45,15 +45,15 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a Terminal window. 1. Use the following command: `cd `. - - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. - - On Linux, the most common place to find your downloaded files is /home/username/Downloads. + - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. + - On Linux, the most common place to find your downloaded files is /home/username/Downloads. 1. Use the following command: `python3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. diff --git a/translations/hu_HU/docs/user-guide/cbhc/browser-exploit.md b/translations/hu_HU/docs/user-guide/cbhc/browser-exploit.md index 6e1553c47..aa6e836d9 100644 --- a/translations/hu_HU/docs/user-guide/cbhc/browser-exploit.md +++ b/translations/hu_HU/docs/user-guide/cbhc/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/hu_HU/docs/user-guide/cbhc/nand-backup.md b/translations/hu_HU/docs/user-guide/cbhc/nand-backup.md index e24bdaf1b..e324b7a81 100644 --- a/translations/hu_HU/docs/user-guide/cbhc/nand-backup.md +++ b/translations/hu_HU/docs/user-guide/cbhc/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/hu_HU/docs/user-guide/haxchi/browser-exploit.md b/translations/hu_HU/docs/user-guide/haxchi/browser-exploit.md index 826e038f3..8853ba483 100644 --- a/translations/hu_HU/docs/user-guide/haxchi/browser-exploit.md +++ b/translations/hu_HU/docs/user-guide/haxchi/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/hu_HU/docs/user-guide/haxchi/nand-backup.md b/translations/hu_HU/docs/user-guide/haxchi/nand-backup.md index 75200207a..9d6d642ad 100644 --- a/translations/hu_HU/docs/user-guide/haxchi/nand-backup.md +++ b/translations/hu_HU/docs/user-guide/haxchi/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/hu_HU/docs/user-guide/mocha/indexiine/browser-exploit.md b/translations/hu_HU/docs/user-guide/mocha/indexiine/browser-exploit.md index 83505773d..c14364eb9 100644 --- a/translations/hu_HU/docs/user-guide/mocha/indexiine/browser-exploit.md +++ b/translations/hu_HU/docs/user-guide/mocha/indexiine/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/hu_HU/docs/user-guide/mocha/indexiine/browser-modding.md b/translations/hu_HU/docs/user-guide/mocha/indexiine/browser-modding.md index 2aa249f4c..2bdfe4a37 100644 --- a/translations/hu_HU/docs/user-guide/mocha/indexiine/browser-modding.md +++ b/translations/hu_HU/docs/user-guide/mocha/indexiine/browser-modding.md @@ -12,7 +12,7 @@ Now that you have your NAND backup in case anything goes wrong later, you can in 1. Turn on your Wii U. 1. Launch the internet browser and open the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. 1. Navigate through the Homebrew Launcher and launch the `Indexiine Installer` app. 1. Press the A button to install Indexiine. 1. When the process completed, close the Homebrew Launcher to get back to your Wii U menu. diff --git a/translations/hu_HU/docs/user-guide/mocha/indexiine/nand-backup.md b/translations/hu_HU/docs/user-guide/mocha/indexiine/nand-backup.md index b0809c71c..88814cff8 100644 --- a/translations/hu_HU/docs/user-guide/mocha/indexiine/nand-backup.md +++ b/translations/hu_HU/docs/user-guide/mocha/indexiine/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/hu_HU/docs/user-guide/mocha/online-exploit/browser-exploit.md b/translations/hu_HU/docs/user-guide/mocha/online-exploit/browser-exploit.md index 8cbf2c754..30b7c94c5 100644 --- a/translations/hu_HU/docs/user-guide/mocha/online-exploit/browser-exploit.md +++ b/translations/hu_HU/docs/user-guide/mocha/online-exploit/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/hu_HU/docs/user-guide/mocha/online-exploit/nand-backup.md b/translations/hu_HU/docs/user-guide/mocha/online-exploit/nand-backup.md index 6513b4f51..adcbfaf3a 100644 --- a/translations/hu_HU/docs/user-guide/mocha/online-exploit/nand-backup.md +++ b/translations/hu_HU/docs/user-guide/mocha/online-exploit/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/hu_HU/docs/vwii/vwii-modding.md b/translations/hu_HU/docs/vwii/vwii-modding.md index c301b7b7f..64bdca1af 100644 --- a/translations/hu_HU/docs/vwii/vwii-modding.md +++ b/translations/hu_HU/docs/vwii/vwii-modding.md @@ -35,11 +35,11 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch the `Wii U NAND Dumper` application. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **optional** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **optional** + - Dump SLC: **optional** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **optional** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slccmpt.bin`, `otp.bin` and if you chose to go with a full backup, `seeprom.bin`, `slc.bin`, and `every mlc.bin.part` file to your computer. @@ -51,10 +51,10 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `A` to backup the Mii Channel and inject the Hackmii Installer then wait until it says Successfully injected wuphax!. - - You will be taken back to the Wii U Menu after a few seconds. + - You will be taken back to the Wii U Menu after a few seconds. 1. Launch vWii (the Wii Menu icon). 1. Launch the vWii Mii Channel. - - If Wuphax has successfully been injected, you will now see the scam warning screen. + - If Wuphax has successfully been injected, you will now see the scam warning screen. 1. Wait until you see `Press 1 to continue` and then press the `1` button. 1. Select `continue`, Install The Homebrew Channel and `Yes, continue`. 1. If The Homebrew Channel has successfully been installed, select `continue` and then `exit`. @@ -62,8 +62,8 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `B` to restore the Mii Channel then wait until it says Mii Channel restored!. - - You will be taken back to the Wii U Menu after a few seconds. - - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). + - You will be taken back to the Wii U Menu after a few seconds. + - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). ### Installing cIOSes @@ -75,19 +75,19 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch The Homebrew Channel. 1. Launch d2x cIOS Installer. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `56` - - Select cIOS slot: `249` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `56` + - Select cIOS slot: `249` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `57` - - Select cIOS slot: `250` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `57` + - Select cIOS slot: `250` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `58` - - Select cIOS slot: `251` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `58` + - Select cIOS slot: `251` 1. Press the `A` button to install. 1. Press the `B` button to exit. diff --git a/translations/id_ID/docs/extras/block-updates.md b/translations/id_ID/docs/extras/block-updates.md index 138f56793..6d1a63a79 100644 --- a/translations/id_ID/docs/extras/block-updates.md +++ b/translations/id_ID/docs/extras/block-updates.md @@ -30,8 +30,8 @@ Currently, two ways exist to block updates on the Wii U system: 1. Plug the SD Card into your Wii U console and power it on. 1. Enter the Wii U's system settings and navigate to `Internet > Connect to the Internet > Connection List >` `Your WiFi connection > Change Settings > DNS` and set the option to `Do not auto-obtain`. 1. You will be asked to input a primary and secondary DNS. Enter the following IP addresses: - - Primary DNS: 168.235.092.108 - - Secondary DNS: 081.004.127.020 DNS Block + - Primary DNS: 168.235.092.108 + - Secondary DNS: 081.004.127.020 DNS Block 1. Click on confirm. 1. You are now blocking updates. In order to access the eShop, run the NNUPatcher app from the Homebrew Launcher before launching the eShop. diff --git a/translations/id_ID/docs/extras/configurable-payload.md b/translations/id_ID/docs/extras/configurable-payload.md index 68e33baea..3068e9e1c 100644 --- a/translations/id_ID/docs/extras/configurable-payload.md +++ b/translations/id_ID/docs/extras/configurable-payload.md @@ -19,4 +19,4 @@ This payload is configurable, similar to Haxchi's configuration. This could be v 1. Extract the `Configurable_Payload.zip` file to the root of your SD Card. If it prompts you to overwrite the files on your SD Card, do so. 1. Place the SD Card into your Wii U and launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. If everything has been done correctly, you should be taken back to the Wii U Menu. Mocha has now been enabled and you can use the Homebrew Launcher Channel you installed earlier. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. diff --git a/translations/id_ID/docs/extras/dump-games.md b/translations/id_ID/docs/extras/dump-games.md index 63c7044ae..d7b48a17a 100644 --- a/translations/id_ID/docs/extras/dump-games.md +++ b/translations/id_ID/docs/extras/dump-games.md @@ -103,11 +103,11 @@ Dumping your Discs allows you to install a copy of your game to the system NAND/ 1. Plug in your USB device. The Wii U will ask you format it. Cancel with No! 1. Launch the Homebrew Launcher and start the MochaFAT32 app. 1. In the configuration menu, set the following settings: - - Config view mode: default - - Skip this menu on launch: on - - Don't relaunch OS: off - - Launch System Menu: on - - RedNAND: off + - Config view mode: default + - Skip this menu on launch: on + - Don't relaunch OS: off + - Launch System Menu: on + - RedNAND: off 1. Your console will load the Wii U menu with your USB device now replacing the SD Card. 1. Launch the Homebrew Launcher and open the disc2app app. 1. Eject any inserted game disc and press the A button to begin the dumping process. diff --git a/translations/id_ID/docs/extras/dump-wii-games.md b/translations/id_ID/docs/extras/dump-wii-games.md index db3692a09..1d98d4209 100644 --- a/translations/id_ID/docs/extras/dump-wii-games.md +++ b/translations/id_ID/docs/extras/dump-wii-games.md @@ -24,15 +24,15 @@ Dumping your Discs allows you to: play them on a Wii emulator (namely Dolphin), 1. Read the Disclaimer then press A. 1. Select Yes to enable Checksum Calculations. 1. Select either USB or Front SD depending on which device you want to use for the dumping process. - - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. + - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. 1. Press A to continue. 1. Select No on the screen that asks you to download redump.org DAT files. 1. Insert your disc then press A. 1. Go [on this page](https://wiki.dolphin-emu.org/index.php?title=Category:Dual_Layer_Disc_games) to see if your disc is dual-layered. 1. Set everything to match the following: - - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) - - Chunk Size: `Max` - - New device per chunk: `No` + - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) + - Chunk Size: `Max` + - New device per chunk: `No` 1. If you want to dump multiple discs, select Yes to remember your settings. If not, select No. ?> Be prepared to wait a while. The dumping process can take 30 minutes to 1 hour depending on your SD Card's speeds. diff --git a/translations/id_ID/docs/troubleshooting/fix-errcode-112-1037.md b/translations/id_ID/docs/troubleshooting/fix-errcode-112-1037.md index 98b8f454c..bce0e7fae 100644 --- a/translations/id_ID/docs/troubleshooting/fix-errcode-112-1037.md +++ b/translations/id_ID/docs/troubleshooting/fix-errcode-112-1037.md @@ -25,14 +25,14 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a command prompt window. 1. Use the following command: `cd `. - - Example: cd C:\Users\username\Downloads. + - Example: cd C:\Users\username\Downloads. 1. Use the following command: `py -3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. @@ -45,15 +45,15 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a Terminal window. 1. Use the following command: `cd `. - - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. - - On Linux, the most common place to find your downloaded files is /home/username/Downloads. + - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. + - On Linux, the most common place to find your downloaded files is /home/username/Downloads. 1. Use the following command: `python3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. diff --git a/translations/id_ID/docs/user-guide/cbhc/browser-exploit.md b/translations/id_ID/docs/user-guide/cbhc/browser-exploit.md index 6e1553c47..aa6e836d9 100644 --- a/translations/id_ID/docs/user-guide/cbhc/browser-exploit.md +++ b/translations/id_ID/docs/user-guide/cbhc/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/id_ID/docs/user-guide/cbhc/nand-backup.md b/translations/id_ID/docs/user-guide/cbhc/nand-backup.md index e24bdaf1b..e324b7a81 100644 --- a/translations/id_ID/docs/user-guide/cbhc/nand-backup.md +++ b/translations/id_ID/docs/user-guide/cbhc/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/id_ID/docs/user-guide/haxchi/browser-exploit.md b/translations/id_ID/docs/user-guide/haxchi/browser-exploit.md index 826e038f3..8853ba483 100644 --- a/translations/id_ID/docs/user-guide/haxchi/browser-exploit.md +++ b/translations/id_ID/docs/user-guide/haxchi/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/id_ID/docs/user-guide/haxchi/nand-backup.md b/translations/id_ID/docs/user-guide/haxchi/nand-backup.md index 75200207a..9d6d642ad 100644 --- a/translations/id_ID/docs/user-guide/haxchi/nand-backup.md +++ b/translations/id_ID/docs/user-guide/haxchi/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/id_ID/docs/user-guide/mocha/indexiine/browser-exploit.md b/translations/id_ID/docs/user-guide/mocha/indexiine/browser-exploit.md index 83505773d..c14364eb9 100644 --- a/translations/id_ID/docs/user-guide/mocha/indexiine/browser-exploit.md +++ b/translations/id_ID/docs/user-guide/mocha/indexiine/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/id_ID/docs/user-guide/mocha/indexiine/browser-modding.md b/translations/id_ID/docs/user-guide/mocha/indexiine/browser-modding.md index 2aa249f4c..2bdfe4a37 100644 --- a/translations/id_ID/docs/user-guide/mocha/indexiine/browser-modding.md +++ b/translations/id_ID/docs/user-guide/mocha/indexiine/browser-modding.md @@ -12,7 +12,7 @@ Now that you have your NAND backup in case anything goes wrong later, you can in 1. Turn on your Wii U. 1. Launch the internet browser and open the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. 1. Navigate through the Homebrew Launcher and launch the `Indexiine Installer` app. 1. Press the A button to install Indexiine. 1. When the process completed, close the Homebrew Launcher to get back to your Wii U menu. diff --git a/translations/id_ID/docs/user-guide/mocha/indexiine/nand-backup.md b/translations/id_ID/docs/user-guide/mocha/indexiine/nand-backup.md index b0809c71c..88814cff8 100644 --- a/translations/id_ID/docs/user-guide/mocha/indexiine/nand-backup.md +++ b/translations/id_ID/docs/user-guide/mocha/indexiine/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/id_ID/docs/user-guide/mocha/online-exploit/browser-exploit.md b/translations/id_ID/docs/user-guide/mocha/online-exploit/browser-exploit.md index 8cbf2c754..30b7c94c5 100644 --- a/translations/id_ID/docs/user-guide/mocha/online-exploit/browser-exploit.md +++ b/translations/id_ID/docs/user-guide/mocha/online-exploit/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/id_ID/docs/user-guide/mocha/online-exploit/nand-backup.md b/translations/id_ID/docs/user-guide/mocha/online-exploit/nand-backup.md index 6513b4f51..adcbfaf3a 100644 --- a/translations/id_ID/docs/user-guide/mocha/online-exploit/nand-backup.md +++ b/translations/id_ID/docs/user-guide/mocha/online-exploit/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/id_ID/docs/vwii/vwii-modding.md b/translations/id_ID/docs/vwii/vwii-modding.md index c301b7b7f..64bdca1af 100644 --- a/translations/id_ID/docs/vwii/vwii-modding.md +++ b/translations/id_ID/docs/vwii/vwii-modding.md @@ -35,11 +35,11 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch the `Wii U NAND Dumper` application. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **optional** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **optional** + - Dump SLC: **optional** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **optional** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slccmpt.bin`, `otp.bin` and if you chose to go with a full backup, `seeprom.bin`, `slc.bin`, and `every mlc.bin.part` file to your computer. @@ -51,10 +51,10 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `A` to backup the Mii Channel and inject the Hackmii Installer then wait until it says Successfully injected wuphax!. - - You will be taken back to the Wii U Menu after a few seconds. + - You will be taken back to the Wii U Menu after a few seconds. 1. Launch vWii (the Wii Menu icon). 1. Launch the vWii Mii Channel. - - If Wuphax has successfully been injected, you will now see the scam warning screen. + - If Wuphax has successfully been injected, you will now see the scam warning screen. 1. Wait until you see `Press 1 to continue` and then press the `1` button. 1. Select `continue`, Install The Homebrew Channel and `Yes, continue`. 1. If The Homebrew Channel has successfully been installed, select `continue` and then `exit`. @@ -62,8 +62,8 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `B` to restore the Mii Channel then wait until it says Mii Channel restored!. - - You will be taken back to the Wii U Menu after a few seconds. - - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). + - You will be taken back to the Wii U Menu after a few seconds. + - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). ### Installing cIOSes @@ -75,19 +75,19 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch The Homebrew Channel. 1. Launch d2x cIOS Installer. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `56` - - Select cIOS slot: `249` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `56` + - Select cIOS slot: `249` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `57` - - Select cIOS slot: `250` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `57` + - Select cIOS slot: `250` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `58` - - Select cIOS slot: `251` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `58` + - Select cIOS slot: `251` 1. Press the `A` button to install. 1. Press the `B` button to exit. diff --git a/translations/it_IT/docs/extras/block-updates.md b/translations/it_IT/docs/extras/block-updates.md index 691f9ba93..7c0b1f636 100644 --- a/translations/it_IT/docs/extras/block-updates.md +++ b/translations/it_IT/docs/extras/block-updates.md @@ -30,8 +30,8 @@ Attualmente, esistono due metodi per bloccare gli aggiornamenti di sistema: 1. Inserisci la scheda SD nel tuo Wii U e accendilo. 1. Entra nelle Impostazioni della console Wii U e vai su `Internet > Collegati a Internet > Lista delle connessioni >` `La tua connessione Wi-Fi > Modifica le impostazioni > DNS` e imposta `Inserimento manuale`. 1. Ti chiederà di inserire un DNS primario e uno secondario. Inserisci i seguenti indirizzi IP: - - DNS primario: 168.235.092.108 - - DNS secondario: 081.004.127.020 Blocco DNS + - DNS primario: 168.235.092.108 + - DNS secondario: 081.004.127.020 Blocco DNS 1. Clicca su OK. 1. Ora stai bloccando gli aggiornamenti. Per accedere all'eShop, esegui l'app NNUPatcher dall'Homebrew Launcher prima di aprire l'eShop. diff --git a/translations/it_IT/docs/extras/configurable-payload.md b/translations/it_IT/docs/extras/configurable-payload.md index e36ef6276..3ad9b60e9 100644 --- a/translations/it_IT/docs/extras/configurable-payload.md +++ b/translations/it_IT/docs/extras/configurable-payload.md @@ -19,4 +19,4 @@ Questa payload è configurabile, similmente alla configurazione di Haxchi. Quest 1. Estrai il file `Configurable_Payload.zip` nella root della tua scheda SD. Se ti chiede di sovrascrivere alcuni file sulla tua SD, fallo. 1. Rimetti la scheda SD nel tuo Wii U, avvia il Browser Internet e recati sul sito `wiiuexploit.xyz`. 1. Clicca su `Run Homebrew Launcher`. Se tutto è stato fatto correttamente, dovresti essere riportato indietro nel menu Wii U. Mocha è ora stato abilitato e puoi utilizzare il Canale Homebrew Launcher che hai installato precedentemente. - - Se il tuo Wii U si blocca su una schermata bianca o su una qualsiasi altra schermata, aspetta qualche secondo. Se non accade nulla, riavvia la console, [resetta i dati del browser](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) e riprova. + - Se il tuo Wii U si blocca su una schermata bianca o su una qualsiasi altra schermata, aspetta qualche secondo. Se non accade nulla, riavvia la console, [resetta i dati del browser](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) e riprova. diff --git a/translations/it_IT/docs/extras/dump-games.md b/translations/it_IT/docs/extras/dump-games.md index c1c396f43..330e7a3a4 100644 --- a/translations/it_IT/docs/extras/dump-games.md +++ b/translations/it_IT/docs/extras/dump-games.md @@ -103,11 +103,11 @@ Dumpare i tuoi dischi ti permette di installare una copia del tuo gioco sulla NA 1. Collega il tuo dispositivo USB. Il Wii U ti chiederà di formattarlo. Annulla con No! 1. Apri l'Homebrew Launcher e avvia l'app MochaFAT32. 1. Nel menù di configurazione, imposta le seguenti impostazioni: - - Config view mode: default - - Skip this menu on launch: on - - Don't relaunch OS: off - - Launch System Menu: on - - RedNAND: off + - Config view mode: default + - Skip this menu on launch: on + - Don't relaunch OS: off + - Launch System Menu: on + - RedNAND: off 1. La tua console caricherà il menu Wii U con il tuo dispositivo USB al posto della scheda SD. 1. Avvia l'Homebrew Launcher e apri l'app disc2app. 1. Espelli qualsiasi disco inserito e premi il pulsante A per iniziare il processo di dumping. diff --git a/translations/it_IT/docs/extras/dump-wii-games.md b/translations/it_IT/docs/extras/dump-wii-games.md index 7ace6acd2..0fb71dc14 100644 --- a/translations/it_IT/docs/extras/dump-wii-games.md +++ b/translations/it_IT/docs/extras/dump-wii-games.md @@ -24,15 +24,15 @@ Dumpare i tuoi dischi ti permette di: giocarli su un emulatore Wii (come Dolphin 1. Leggi le avvertenze e premi A. 1. Seleziona Yes per abilitare Checksum Calculations. 1. Seleziona lo USB o la SD a dipendenza del dispositivo che vuoi utilizzare per il processo di dumping. - - Si prega di notare che il dispositivo che sceglierai deve essere formattato in FAT32 o NTFS. + - Si prega di notare che il dispositivo che sceglierai deve essere formattato in FAT32 o NTFS. 1. Premi A per continuare. 1. Seleziona No nella schermata che chiede di scaricare i file DAT di redump.org. 1. Inserisci il tuo disco e premi A. 1. Vai [su questa pagina](https://wiki.dolphin-emu.org/index.php?title=Category:Dual_Layer_Disc_games) per vedere se il tuo disco è a doppio strato. 1. Imposta tutto in modo da corrispondere a quanto segue: - - Dual Layer: `Yes/No` (Seleziona `Yes` se il tuo disco è a doppio strato) - - Chunk Size: `Max` - - New device per chunk: `No` + - Dual Layer: `Yes/No` (Seleziona `Yes` se il tuo disco è a doppio strato) + - Chunk Size: `Max` + - New device per chunk: `No` 1. Se vuoi dumpare più dischi, seleziona Yes per memorizzare le impostazioni. In caso contrario, seleziona No. ?> Preparati ad aspettare un po'. Il processo di dumping può richiedere dai 30 minuti a 1 ora a dipendenza della velocità della tua scheda SD. diff --git a/translations/it_IT/docs/troubleshooting/fix-errcode-112-1037.md b/translations/it_IT/docs/troubleshooting/fix-errcode-112-1037.md index afa9426af..53e6b3301 100644 --- a/translations/it_IT/docs/troubleshooting/fix-errcode-112-1037.md +++ b/translations/it_IT/docs/troubleshooting/fix-errcode-112-1037.md @@ -25,14 +25,14 @@ Questa pagina ti guiderà nel processo di risolvimento del codice errore 112-103 1. Torna al menu Wii U. 1. Apri una del finestra del Prompt dei Comandi sul PC. 1. Utilizzare il seguente comando: `cd `. - - Esempio: cd C:\Users\username\Downloads. + - Esempio: cd C:\Users\username\Downloads. 1. Usa il seguente comando: `py -3 -i wupclient.py`. 1. Inserisci l'indirizzo IP del tuo Wii U. - - Non sai come trovarlo? Leggi [qui](find-wiiu-ip-address). + - Non sai come trovarlo? Leggi [qui](find-wiiu-ip-address). 1. Usa il comando appropriato a seconda della regione della tua console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. Se tutto è andato bene, otterrai la seguente risposta: `chmod returned 0x0`. 1. Il codice errore dovrebbe essere sparito. @@ -45,15 +45,15 @@ Questa pagina ti guiderà nel processo di risolvimento del codice errore 112-103 1. Torna al menu Wii U. 1. Apri una finestra del Terminale. 1. Utilizzare il seguente comando: `cd `. - - Su macOS, il luogo più comune per trovare i file scaricati è /Users/username/Downloads. - - Su Linux, il luogo più comune per trovare i file scaricati è /home/username/Downloads. + - Su macOS, il luogo più comune per trovare i file scaricati è /Users/username/Downloads. + - Su Linux, il luogo più comune per trovare i file scaricati è /home/username/Downloads. 1. Usa il seguente comando: `python3 -i wupclient.py`. 1. Inserisci l'indirizzo IP del tuo Wii U. - - Non sai come trovarlo? Leggi [qui](find-wiiu-ip-address). + - Non sai come trovarlo? Leggi [qui](find-wiiu-ip-address). 1. Usa il comando appropriato a seconda della regione della tua console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. Se tutto è andato bene, otterrai la seguente risposta: `chmod returned 0x0`. 1. Il codice errore dovrebbe essere sparito. diff --git a/translations/it_IT/docs/user-guide/cbhc/browser-exploit.md b/translations/it_IT/docs/user-guide/cbhc/browser-exploit.md index e250f47f3..3a19eb6de 100644 --- a/translations/it_IT/docs/user-guide/cbhc/browser-exploit.md +++ b/translations/it_IT/docs/user-guide/cbhc/browser-exploit.md @@ -9,4 +9,4 @@ Per installare CFW, dobbiamo prima avviare l'Homebrew Launcher attraverso l'expl 1. Togli la scheda SD dal computer ed inseriscila nella console Wii U. 1. Avvia il browser e naviga sul sito `wiiuexploit.xyz`. 1. Premi su `Run Homebrew Launcher!`. La tua console dovrebbe avviare l'Homebrew Launcher. - - Se il tuo Wii U rimane bloccato su uno schermo bianco o un altro schermo bloccato, aspetta qualche secondo. Se non accade nulla, riavvia la console, [resetta i dati del browser](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) e riprova. \ No newline at end of file + - Se il tuo Wii U rimane bloccato su uno schermo bianco o un altro schermo bloccato, aspetta qualche secondo. Se non accade nulla, riavvia la console, [resetta i dati del browser](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) e riprova. \ No newline at end of file diff --git a/translations/it_IT/docs/user-guide/cbhc/nand-backup.md b/translations/it_IT/docs/user-guide/cbhc/nand-backup.md index 2606ce223..34bfedffe 100644 --- a/translations/it_IT/docs/user-guide/cbhc/nand-backup.md +++ b/translations/it_IT/docs/user-guide/cbhc/nand-backup.md @@ -12,11 +12,11 @@ In caso qualcosa vada storto nei processi successivi e la tua Wii U si bricka, r 1. Naviga attraverso l'Homebrew Launcher e avvia l'app `Wii U NAND Dumper`. 1. Usa il D-Pad del GamePad per inserire la seguente configurazione: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **opzionale** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **opzionale** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Premi A per iniziare il processo di dumping. 1. Quando il processo è completo, spegni la tua Wii U, prendi la SD fuori dalla Wii U ed inseriscila nel tuo PC. 1. Per assicurarti di non perdere file, copia i file: `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` e se scegli di usare un backup completo, `ogni file chiamato mlc.bin.part` sul tuo computer. diff --git a/translations/it_IT/docs/user-guide/haxchi/browser-exploit.md b/translations/it_IT/docs/user-guide/haxchi/browser-exploit.md index 6023d2f09..663e27bb7 100644 --- a/translations/it_IT/docs/user-guide/haxchi/browser-exploit.md +++ b/translations/it_IT/docs/user-guide/haxchi/browser-exploit.md @@ -9,4 +9,4 @@ Per installare CFW, dobbiamo prima avviare l'Homebrew Launcher attraverso l'expl 1. Togli la SD dal tuo computer e mettila nella tua Wii U. 1. Avvia il browser e naviga nel sito `wiiuexploit.xyz`. 1. Premi su `Run Homebrew Launcher!`. La tua console dovrebbe avviare l'Homebrew Launcher. - - Se la tua Wii U rimane bloccata su uno schermo bianco o schermo, aspetta qualche secondo. Se non accade nulla, riavvia la console, [resetta i dati del browser](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) e riprova. \ No newline at end of file + - Se la tua Wii U rimane bloccata su uno schermo bianco o su un altro schermo, aspetta qualche secondo. Se non accade nulla, riavvia la console, [resetta i dati del browser](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) e riprova. \ No newline at end of file diff --git a/translations/it_IT/docs/user-guide/haxchi/nand-backup.md b/translations/it_IT/docs/user-guide/haxchi/nand-backup.md index e9011b28c..7595d7802 100644 --- a/translations/it_IT/docs/user-guide/haxchi/nand-backup.md +++ b/translations/it_IT/docs/user-guide/haxchi/nand-backup.md @@ -12,11 +12,11 @@ In caso qualcosa vada storto nei processi successivi e la tua Wii U si bricka, r 1. Naviga attraverso l'Homebrew Launcher e avvia l'app `Wii U NAND Dumper`. 1. Usa il D-Pad del GamePad per inserire la seguente configurazione: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **opzionale** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **opzionale** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Premi A per iniziare il processo di dumping. 1. Quando il processo è completo, spegni la tua Wii U, tira fuori la SD fuori dalla Wii U ed inseriscila nel tuo PC. 1. Per assicurarti di non perdere file, copia i file: `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` e se scegli di andare con un backup completo, `ogni file chiamato mlc.bin.part` sul tuo computer. diff --git a/translations/it_IT/docs/user-guide/mocha/indexiine/browser-exploit.md b/translations/it_IT/docs/user-guide/mocha/indexiine/browser-exploit.md index e6a944e75..a16b02b85 100644 --- a/translations/it_IT/docs/user-guide/mocha/indexiine/browser-exploit.md +++ b/translations/it_IT/docs/user-guide/mocha/indexiine/browser-exploit.md @@ -9,4 +9,4 @@ Per installare CFW, dobbiamo prima avviare l'Homebrew Launcher attraverso l'expl 1. Togli la SD dal tuo computer e mettila nella tua Wii U. 1. Avvia il browser e naviga sul sito `wiiuexploit.xyz`. 1. Premi su `Run Homebrew Launcher!`. La tua console dovrebbe avviare l'Homebrew Launcher. - - Se il tuo Wii U rimane bloccato su uno schermo bianco o un altro schermo bloccato, aspetta qualche secondo. Se non accade nulla, riavvia la console, [resetta i dati del browser](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) e riprova. \ No newline at end of file + - Se il tuo Wii U rimane bloccato su uno schermo bianco o un altro schermo bloccato, aspetta qualche secondo. Se non accade nulla, riavvia la console, [resetta i dati del browser](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) e riprova. \ No newline at end of file diff --git a/translations/it_IT/docs/user-guide/mocha/indexiine/browser-modding.md b/translations/it_IT/docs/user-guide/mocha/indexiine/browser-modding.md index 72682b320..d4444922c 100644 --- a/translations/it_IT/docs/user-guide/mocha/indexiine/browser-modding.md +++ b/translations/it_IT/docs/user-guide/mocha/indexiine/browser-modding.md @@ -12,7 +12,7 @@ Ora che hai il tuo backup della NAND in caso qualcosa andasse storto, puoi insta 1. Accendi la tua Wii U. 1. Avvia il browser e apri il sito `wiiuexploit.xyz`. 1. Premi su `Run Homebrew Launcher!`. La tua console dovrebbe avviare l'Homebrew Launcher. - - Se il tuo Wii U rimane bloccato su uno schermo bianco o un altro schermo bloccato, aspetta qualche secondo. Se non accade nulla, riavvia la console, [resetta i dati del browser](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) e riprova. + - Se il tuo Wii U rimane bloccato su uno schermo bianco o un altro schermo bloccato, aspetta qualche secondo. Se non accade nulla, riavvia la console, [resetta i dati del browser](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) e riprova. 1. Naviga attraverso l'Homebrew Launcher e avvia l'app `Indexiine Installer`. 1. Premi A per installare Indexiine. 1. Quando il processo ha finito, chiudi l'Homebrew Launcher per tornare indietro nel tuo Menu Wii U. diff --git a/translations/it_IT/docs/user-guide/mocha/indexiine/nand-backup.md b/translations/it_IT/docs/user-guide/mocha/indexiine/nand-backup.md index d8b39ef3c..e24ae51ed 100644 --- a/translations/it_IT/docs/user-guide/mocha/indexiine/nand-backup.md +++ b/translations/it_IT/docs/user-guide/mocha/indexiine/nand-backup.md @@ -12,11 +12,11 @@ In caso qualcosa vada storto nei processi successivi e la tua Wii U si bricka, r 1. Naviga attraverso l'Homebrew Launcher e avvia l'app `Wii U NAND Dumper`. 1. Usa il D-Pad del GamePad per inserire la seguente configurazione: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **opzionale** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **opzionale** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Premi A per iniziare il processo di dumping. 1. Quando il processo è completo, spegni la tua Wii U, prendi la SD fuori dalla Wii U ed inseriscila nel tuo PC. 1. Per assicurarti di non perdere file, copia i file: `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` e se scegli di usare un backup completo, `ogni file chiamato mlc.bin.part` sul tuo computer. diff --git a/translations/it_IT/docs/user-guide/mocha/online-exploit/browser-exploit.md b/translations/it_IT/docs/user-guide/mocha/online-exploit/browser-exploit.md index c61828ab5..fdfa096a9 100644 --- a/translations/it_IT/docs/user-guide/mocha/online-exploit/browser-exploit.md +++ b/translations/it_IT/docs/user-guide/mocha/online-exploit/browser-exploit.md @@ -9,4 +9,4 @@ Per installare CFW, dobbiamo prima avviare l'Homebrew Launcher attraverso l'expl 1. Togli la SD dal tuo computer e mettila nella tua Wii U. 1. Avvia il browser e naviga sul sito `wiiuexploit.xyz`. 1. Premi su `Run Homebrew Launcher!`. La tua console dovrebbe avviare l'Homebrew Launcher. - - Se il tuo Wii U rimane bloccato su uno schermo bianco o un altro schermo bloccato, aspetta qualche secondo. Se non accade nulla, riavvia la console, [resetta i dati del browser](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) e riprova. \ No newline at end of file + - Se il tuo Wii U rimane bloccato su uno schermo bianco o un altro schermo bloccato, aspetta qualche secondo. Se non accade nulla, riavvia la console, [resetta i dati del browser](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) e riprova. \ No newline at end of file diff --git a/translations/it_IT/docs/user-guide/mocha/online-exploit/nand-backup.md b/translations/it_IT/docs/user-guide/mocha/online-exploit/nand-backup.md index 3ac5b6f6b..5f586298f 100644 --- a/translations/it_IT/docs/user-guide/mocha/online-exploit/nand-backup.md +++ b/translations/it_IT/docs/user-guide/mocha/online-exploit/nand-backup.md @@ -12,11 +12,11 @@ In caso qualcosa vada storto nei processi successivi e la tua Wii U si bricka, r 1. Naviga attraverso l'Homebrew Launcher e avvia l'app `Wii U NAND Dumper`. 1. Usa il D-Pad del GamePad per inserire la seguente configurazione: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **opzionale** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **opzionale** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Premi A per iniziare il processo di dumping. 1. Quando il processo è completo, spegni la tua Wii U, prendi la SD fuori dalla Wii U ed inseriscila nel tuo PC. 1. Per assicurarti di non perdere file, copia i file: `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` e se scegli di usare un backup completo, `ogni file chiamato mlc.bin.part` sul tuo computer. diff --git a/translations/it_IT/docs/vwii/vwii-modding.md b/translations/it_IT/docs/vwii/vwii-modding.md index 25a1c19ca..eaf0ffffd 100644 --- a/translations/it_IT/docs/vwii/vwii-modding.md +++ b/translations/it_IT/docs/vwii/vwii-modding.md @@ -35,11 +35,11 @@ Se durante il processo qualcosa va storto e la tua vWii si bricka, potrai ripris 1. Avvia l'[Homebrew Launcher](vwii/browser-exploit). 1. Avvia l'applicazione `Wii U NAND Dumper`. 1. Usa il D-Pad del GamePad per inserire la seguente configurazione: - - Dump SLC: **optional** - - Dump SLCCMPT: **yes** - - Dump MLC: **opzionale** - - Dump OTP: **yes** - - Dump SEEPROM: **optional** + - Dump SLC: **optional** + - Dump SLCCMPT: **yes** + - Dump MLC: **opzionale** + - Dump OTP: **yes** + - Dump SEEPROM: **optional** 1. Premi A per iniziare il processo di dumping. 1. Quando il processo è completo, spegni la tua Wii U, prendi la SD fuori dalla Wii U ed inseriscila nel tuo PC. 1. Assicurati di non perdere i file, copia `slccmpt.bin`, `otp.bin`, e se scegli di fare il backup intero, copia i file `seeprom.bin`, `slc.bin`, e ogni parte di `mlc.bin.part` sul tuo computer. @@ -51,10 +51,10 @@ Se durante il processo qualcosa va storto e la tua vWii si bricka, potrai ripris 1. Avvia l'[Homebrew Launcher](vwii/browser-exploit). 1. Avvia Wuphax. 1. Premi `A` per fare il backup del canale Mii e iniettare l'Hackmii Installer e aspetta che dice Successfully injected wuphax!. - - Verrai riportato al Menu Wii U in pochi secondi. + - Verrai riportato al Menu Wii U in pochi secondi. 1. Avvia il vWii (l'icona del Menu Wii). 1. Avvia il canale Mii del vWii. - - Se hai iniettato bene Wuphax, vedrai l'avviso dell'avvertimento truffa. + - Se hai iniettato bene Wuphax, vedrai l'avviso dell'avvertimento truffa. 1. Aspetta finchè vedi `Press 1 to continue` e premi `1` sul Telecomando Wii. 1. Seleziona `continue`, Install The Homebrew Channel e `Yes, continue`. 1. Se l'Homebrew Channel è stato installato correttamente, seleziona `continue` e poi `exit`. @@ -62,8 +62,8 @@ Se durante il processo qualcosa va storto e la tua vWii si bricka, potrai ripris 1. Avvia l'[Homebrew Launcher](vwii/browser-exploit). 1. Avvia Wuphax. 1. Premi `B` per ripristinare il Canale Mii e aspetta finchè dice Mii Channel restored!. - - Verrai riportato al Menu Wii U in pochi secondi. - - Se per qualche motivo non puoi ripristinare il backup, devi [reinstallare il Canale Mii](recover-vwii-ioses-channels). + - Verrai riportato al Menu Wii U in pochi secondi. + - Se per qualche motivo non puoi ripristinare il backup, devi [reinstallare il Canale Mii](recover-vwii-ioses-channels). ### Installazione dei cIOS @@ -75,19 +75,19 @@ Se durante il processo qualcosa va storto e la tua vWii si bricka, potrai ripris 1. Avvia L'Homebrew Channel. 1. Avvia d2x cIOS Installer. 1. Imposta tutto in modo da corrispondere a quanto segue: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `56` - - Select cIOS slot: `249` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `56` + - Select cIOS slot: `249` 1. Premi `A` per installare. 1. Imposta tutto in modo da corrispondere a quanto segue: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `57` - - Select cIOS slot: `250` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `57` + - Select cIOS slot: `250` 1. Premi `A` per installare. 1. Imposta tutto in modo da corrispondere a quanto segue: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `58` - - Select cIOS slot: `251` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `58` + - Select cIOS slot: `251` 1. Premi `A` per installare. 1. Premi `B` per uscire. diff --git a/translations/ja_JP/docs/extras/block-updates.md b/translations/ja_JP/docs/extras/block-updates.md index 138f56793..6d1a63a79 100644 --- a/translations/ja_JP/docs/extras/block-updates.md +++ b/translations/ja_JP/docs/extras/block-updates.md @@ -30,8 +30,8 @@ Currently, two ways exist to block updates on the Wii U system: 1. Plug the SD Card into your Wii U console and power it on. 1. Enter the Wii U's system settings and navigate to `Internet > Connect to the Internet > Connection List >` `Your WiFi connection > Change Settings > DNS` and set the option to `Do not auto-obtain`. 1. You will be asked to input a primary and secondary DNS. Enter the following IP addresses: - - Primary DNS: 168.235.092.108 - - Secondary DNS: 081.004.127.020 DNS Block + - Primary DNS: 168.235.092.108 + - Secondary DNS: 081.004.127.020 DNS Block 1. Click on confirm. 1. You are now blocking updates. In order to access the eShop, run the NNUPatcher app from the Homebrew Launcher before launching the eShop. diff --git a/translations/ja_JP/docs/extras/configurable-payload.md b/translations/ja_JP/docs/extras/configurable-payload.md index 68e33baea..3068e9e1c 100644 --- a/translations/ja_JP/docs/extras/configurable-payload.md +++ b/translations/ja_JP/docs/extras/configurable-payload.md @@ -19,4 +19,4 @@ This payload is configurable, similar to Haxchi's configuration. This could be v 1. Extract the `Configurable_Payload.zip` file to the root of your SD Card. If it prompts you to overwrite the files on your SD Card, do so. 1. Place the SD Card into your Wii U and launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. If everything has been done correctly, you should be taken back to the Wii U Menu. Mocha has now been enabled and you can use the Homebrew Launcher Channel you installed earlier. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. diff --git a/translations/ja_JP/docs/extras/dump-games.md b/translations/ja_JP/docs/extras/dump-games.md index 63c7044ae..d7b48a17a 100644 --- a/translations/ja_JP/docs/extras/dump-games.md +++ b/translations/ja_JP/docs/extras/dump-games.md @@ -103,11 +103,11 @@ Dumping your Discs allows you to install a copy of your game to the system NAND/ 1. Plug in your USB device. The Wii U will ask you format it. Cancel with No! 1. Launch the Homebrew Launcher and start the MochaFAT32 app. 1. In the configuration menu, set the following settings: - - Config view mode: default - - Skip this menu on launch: on - - Don't relaunch OS: off - - Launch System Menu: on - - RedNAND: off + - Config view mode: default + - Skip this menu on launch: on + - Don't relaunch OS: off + - Launch System Menu: on + - RedNAND: off 1. Your console will load the Wii U menu with your USB device now replacing the SD Card. 1. Launch the Homebrew Launcher and open the disc2app app. 1. Eject any inserted game disc and press the A button to begin the dumping process. diff --git a/translations/ja_JP/docs/extras/dump-wii-games.md b/translations/ja_JP/docs/extras/dump-wii-games.md index db3692a09..1d98d4209 100644 --- a/translations/ja_JP/docs/extras/dump-wii-games.md +++ b/translations/ja_JP/docs/extras/dump-wii-games.md @@ -24,15 +24,15 @@ Dumping your Discs allows you to: play them on a Wii emulator (namely Dolphin), 1. Read the Disclaimer then press A. 1. Select Yes to enable Checksum Calculations. 1. Select either USB or Front SD depending on which device you want to use for the dumping process. - - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. + - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. 1. Press A to continue. 1. Select No on the screen that asks you to download redump.org DAT files. 1. Insert your disc then press A. 1. Go [on this page](https://wiki.dolphin-emu.org/index.php?title=Category:Dual_Layer_Disc_games) to see if your disc is dual-layered. 1. Set everything to match the following: - - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) - - Chunk Size: `Max` - - New device per chunk: `No` + - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) + - Chunk Size: `Max` + - New device per chunk: `No` 1. If you want to dump multiple discs, select Yes to remember your settings. If not, select No. ?> Be prepared to wait a while. The dumping process can take 30 minutes to 1 hour depending on your SD Card's speeds. diff --git a/translations/ja_JP/docs/troubleshooting/fix-errcode-112-1037.md b/translations/ja_JP/docs/troubleshooting/fix-errcode-112-1037.md index 98b8f454c..bce0e7fae 100644 --- a/translations/ja_JP/docs/troubleshooting/fix-errcode-112-1037.md +++ b/translations/ja_JP/docs/troubleshooting/fix-errcode-112-1037.md @@ -25,14 +25,14 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a command prompt window. 1. Use the following command: `cd `. - - Example: cd C:\Users\username\Downloads. + - Example: cd C:\Users\username\Downloads. 1. Use the following command: `py -3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. @@ -45,15 +45,15 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a Terminal window. 1. Use the following command: `cd `. - - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. - - On Linux, the most common place to find your downloaded files is /home/username/Downloads. + - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. + - On Linux, the most common place to find your downloaded files is /home/username/Downloads. 1. Use the following command: `python3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. diff --git a/translations/ja_JP/docs/user-guide/cbhc/browser-exploit.md b/translations/ja_JP/docs/user-guide/cbhc/browser-exploit.md index 6e1553c47..aa6e836d9 100644 --- a/translations/ja_JP/docs/user-guide/cbhc/browser-exploit.md +++ b/translations/ja_JP/docs/user-guide/cbhc/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/ja_JP/docs/user-guide/cbhc/nand-backup.md b/translations/ja_JP/docs/user-guide/cbhc/nand-backup.md index e24bdaf1b..e324b7a81 100644 --- a/translations/ja_JP/docs/user-guide/cbhc/nand-backup.md +++ b/translations/ja_JP/docs/user-guide/cbhc/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/ja_JP/docs/user-guide/haxchi/browser-exploit.md b/translations/ja_JP/docs/user-guide/haxchi/browser-exploit.md index 826e038f3..8853ba483 100644 --- a/translations/ja_JP/docs/user-guide/haxchi/browser-exploit.md +++ b/translations/ja_JP/docs/user-guide/haxchi/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/ja_JP/docs/user-guide/haxchi/nand-backup.md b/translations/ja_JP/docs/user-guide/haxchi/nand-backup.md index 75200207a..9d6d642ad 100644 --- a/translations/ja_JP/docs/user-guide/haxchi/nand-backup.md +++ b/translations/ja_JP/docs/user-guide/haxchi/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/ja_JP/docs/user-guide/mocha/indexiine/browser-exploit.md b/translations/ja_JP/docs/user-guide/mocha/indexiine/browser-exploit.md index 83505773d..c14364eb9 100644 --- a/translations/ja_JP/docs/user-guide/mocha/indexiine/browser-exploit.md +++ b/translations/ja_JP/docs/user-guide/mocha/indexiine/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/ja_JP/docs/user-guide/mocha/indexiine/browser-modding.md b/translations/ja_JP/docs/user-guide/mocha/indexiine/browser-modding.md index 2aa249f4c..2bdfe4a37 100644 --- a/translations/ja_JP/docs/user-guide/mocha/indexiine/browser-modding.md +++ b/translations/ja_JP/docs/user-guide/mocha/indexiine/browser-modding.md @@ -12,7 +12,7 @@ Now that you have your NAND backup in case anything goes wrong later, you can in 1. Turn on your Wii U. 1. Launch the internet browser and open the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. 1. Navigate through the Homebrew Launcher and launch the `Indexiine Installer` app. 1. Press the A button to install Indexiine. 1. When the process completed, close the Homebrew Launcher to get back to your Wii U menu. diff --git a/translations/ja_JP/docs/user-guide/mocha/indexiine/nand-backup.md b/translations/ja_JP/docs/user-guide/mocha/indexiine/nand-backup.md index b0809c71c..88814cff8 100644 --- a/translations/ja_JP/docs/user-guide/mocha/indexiine/nand-backup.md +++ b/translations/ja_JP/docs/user-guide/mocha/indexiine/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/ja_JP/docs/user-guide/mocha/online-exploit/browser-exploit.md b/translations/ja_JP/docs/user-guide/mocha/online-exploit/browser-exploit.md index 8cbf2c754..30b7c94c5 100644 --- a/translations/ja_JP/docs/user-guide/mocha/online-exploit/browser-exploit.md +++ b/translations/ja_JP/docs/user-guide/mocha/online-exploit/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/ja_JP/docs/user-guide/mocha/online-exploit/nand-backup.md b/translations/ja_JP/docs/user-guide/mocha/online-exploit/nand-backup.md index 6513b4f51..adcbfaf3a 100644 --- a/translations/ja_JP/docs/user-guide/mocha/online-exploit/nand-backup.md +++ b/translations/ja_JP/docs/user-guide/mocha/online-exploit/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/ja_JP/docs/vwii/vwii-modding.md b/translations/ja_JP/docs/vwii/vwii-modding.md index c301b7b7f..64bdca1af 100644 --- a/translations/ja_JP/docs/vwii/vwii-modding.md +++ b/translations/ja_JP/docs/vwii/vwii-modding.md @@ -35,11 +35,11 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch the `Wii U NAND Dumper` application. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **optional** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **optional** + - Dump SLC: **optional** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **optional** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slccmpt.bin`, `otp.bin` and if you chose to go with a full backup, `seeprom.bin`, `slc.bin`, and `every mlc.bin.part` file to your computer. @@ -51,10 +51,10 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `A` to backup the Mii Channel and inject the Hackmii Installer then wait until it says Successfully injected wuphax!. - - You will be taken back to the Wii U Menu after a few seconds. + - You will be taken back to the Wii U Menu after a few seconds. 1. Launch vWii (the Wii Menu icon). 1. Launch the vWii Mii Channel. - - If Wuphax has successfully been injected, you will now see the scam warning screen. + - If Wuphax has successfully been injected, you will now see the scam warning screen. 1. Wait until you see `Press 1 to continue` and then press the `1` button. 1. Select `continue`, Install The Homebrew Channel and `Yes, continue`. 1. If The Homebrew Channel has successfully been installed, select `continue` and then `exit`. @@ -62,8 +62,8 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `B` to restore the Mii Channel then wait until it says Mii Channel restored!. - - You will be taken back to the Wii U Menu after a few seconds. - - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). + - You will be taken back to the Wii U Menu after a few seconds. + - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). ### Installing cIOSes @@ -75,19 +75,19 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch The Homebrew Channel. 1. Launch d2x cIOS Installer. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `56` - - Select cIOS slot: `249` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `56` + - Select cIOS slot: `249` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `57` - - Select cIOS slot: `250` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `57` + - Select cIOS slot: `250` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `58` - - Select cIOS slot: `251` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `58` + - Select cIOS slot: `251` 1. Press the `A` button to install. 1. Press the `B` button to exit. diff --git a/translations/ko_KR/docs/extras/block-updates.md b/translations/ko_KR/docs/extras/block-updates.md index 138f56793..6d1a63a79 100644 --- a/translations/ko_KR/docs/extras/block-updates.md +++ b/translations/ko_KR/docs/extras/block-updates.md @@ -30,8 +30,8 @@ Currently, two ways exist to block updates on the Wii U system: 1. Plug the SD Card into your Wii U console and power it on. 1. Enter the Wii U's system settings and navigate to `Internet > Connect to the Internet > Connection List >` `Your WiFi connection > Change Settings > DNS` and set the option to `Do not auto-obtain`. 1. You will be asked to input a primary and secondary DNS. Enter the following IP addresses: - - Primary DNS: 168.235.092.108 - - Secondary DNS: 081.004.127.020 DNS Block + - Primary DNS: 168.235.092.108 + - Secondary DNS: 081.004.127.020 DNS Block 1. Click on confirm. 1. You are now blocking updates. In order to access the eShop, run the NNUPatcher app from the Homebrew Launcher before launching the eShop. diff --git a/translations/ko_KR/docs/extras/configurable-payload.md b/translations/ko_KR/docs/extras/configurable-payload.md index 68e33baea..3068e9e1c 100644 --- a/translations/ko_KR/docs/extras/configurable-payload.md +++ b/translations/ko_KR/docs/extras/configurable-payload.md @@ -19,4 +19,4 @@ This payload is configurable, similar to Haxchi's configuration. This could be v 1. Extract the `Configurable_Payload.zip` file to the root of your SD Card. If it prompts you to overwrite the files on your SD Card, do so. 1. Place the SD Card into your Wii U and launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. If everything has been done correctly, you should be taken back to the Wii U Menu. Mocha has now been enabled and you can use the Homebrew Launcher Channel you installed earlier. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. diff --git a/translations/ko_KR/docs/extras/dump-games.md b/translations/ko_KR/docs/extras/dump-games.md index 63c7044ae..d7b48a17a 100644 --- a/translations/ko_KR/docs/extras/dump-games.md +++ b/translations/ko_KR/docs/extras/dump-games.md @@ -103,11 +103,11 @@ Dumping your Discs allows you to install a copy of your game to the system NAND/ 1. Plug in your USB device. The Wii U will ask you format it. Cancel with No! 1. Launch the Homebrew Launcher and start the MochaFAT32 app. 1. In the configuration menu, set the following settings: - - Config view mode: default - - Skip this menu on launch: on - - Don't relaunch OS: off - - Launch System Menu: on - - RedNAND: off + - Config view mode: default + - Skip this menu on launch: on + - Don't relaunch OS: off + - Launch System Menu: on + - RedNAND: off 1. Your console will load the Wii U menu with your USB device now replacing the SD Card. 1. Launch the Homebrew Launcher and open the disc2app app. 1. Eject any inserted game disc and press the A button to begin the dumping process. diff --git a/translations/ko_KR/docs/extras/dump-wii-games.md b/translations/ko_KR/docs/extras/dump-wii-games.md index db3692a09..1d98d4209 100644 --- a/translations/ko_KR/docs/extras/dump-wii-games.md +++ b/translations/ko_KR/docs/extras/dump-wii-games.md @@ -24,15 +24,15 @@ Dumping your Discs allows you to: play them on a Wii emulator (namely Dolphin), 1. Read the Disclaimer then press A. 1. Select Yes to enable Checksum Calculations. 1. Select either USB or Front SD depending on which device you want to use for the dumping process. - - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. + - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. 1. Press A to continue. 1. Select No on the screen that asks you to download redump.org DAT files. 1. Insert your disc then press A. 1. Go [on this page](https://wiki.dolphin-emu.org/index.php?title=Category:Dual_Layer_Disc_games) to see if your disc is dual-layered. 1. Set everything to match the following: - - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) - - Chunk Size: `Max` - - New device per chunk: `No` + - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) + - Chunk Size: `Max` + - New device per chunk: `No` 1. If you want to dump multiple discs, select Yes to remember your settings. If not, select No. ?> Be prepared to wait a while. The dumping process can take 30 minutes to 1 hour depending on your SD Card's speeds. diff --git a/translations/ko_KR/docs/troubleshooting/fix-errcode-112-1037.md b/translations/ko_KR/docs/troubleshooting/fix-errcode-112-1037.md index 98b8f454c..bce0e7fae 100644 --- a/translations/ko_KR/docs/troubleshooting/fix-errcode-112-1037.md +++ b/translations/ko_KR/docs/troubleshooting/fix-errcode-112-1037.md @@ -25,14 +25,14 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a command prompt window. 1. Use the following command: `cd `. - - Example: cd C:\Users\username\Downloads. + - Example: cd C:\Users\username\Downloads. 1. Use the following command: `py -3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. @@ -45,15 +45,15 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a Terminal window. 1. Use the following command: `cd `. - - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. - - On Linux, the most common place to find your downloaded files is /home/username/Downloads. + - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. + - On Linux, the most common place to find your downloaded files is /home/username/Downloads. 1. Use the following command: `python3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. diff --git a/translations/ko_KR/docs/user-guide/cbhc/browser-exploit.md b/translations/ko_KR/docs/user-guide/cbhc/browser-exploit.md index 6e1553c47..aa6e836d9 100644 --- a/translations/ko_KR/docs/user-guide/cbhc/browser-exploit.md +++ b/translations/ko_KR/docs/user-guide/cbhc/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/ko_KR/docs/user-guide/cbhc/nand-backup.md b/translations/ko_KR/docs/user-guide/cbhc/nand-backup.md index e24bdaf1b..e324b7a81 100644 --- a/translations/ko_KR/docs/user-guide/cbhc/nand-backup.md +++ b/translations/ko_KR/docs/user-guide/cbhc/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/ko_KR/docs/user-guide/haxchi/browser-exploit.md b/translations/ko_KR/docs/user-guide/haxchi/browser-exploit.md index 826e038f3..8853ba483 100644 --- a/translations/ko_KR/docs/user-guide/haxchi/browser-exploit.md +++ b/translations/ko_KR/docs/user-guide/haxchi/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/ko_KR/docs/user-guide/haxchi/nand-backup.md b/translations/ko_KR/docs/user-guide/haxchi/nand-backup.md index 75200207a..9d6d642ad 100644 --- a/translations/ko_KR/docs/user-guide/haxchi/nand-backup.md +++ b/translations/ko_KR/docs/user-guide/haxchi/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/ko_KR/docs/user-guide/mocha/indexiine/browser-exploit.md b/translations/ko_KR/docs/user-guide/mocha/indexiine/browser-exploit.md index 83505773d..c14364eb9 100644 --- a/translations/ko_KR/docs/user-guide/mocha/indexiine/browser-exploit.md +++ b/translations/ko_KR/docs/user-guide/mocha/indexiine/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/ko_KR/docs/user-guide/mocha/indexiine/browser-modding.md b/translations/ko_KR/docs/user-guide/mocha/indexiine/browser-modding.md index 2aa249f4c..2bdfe4a37 100644 --- a/translations/ko_KR/docs/user-guide/mocha/indexiine/browser-modding.md +++ b/translations/ko_KR/docs/user-guide/mocha/indexiine/browser-modding.md @@ -12,7 +12,7 @@ Now that you have your NAND backup in case anything goes wrong later, you can in 1. Turn on your Wii U. 1. Launch the internet browser and open the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. 1. Navigate through the Homebrew Launcher and launch the `Indexiine Installer` app. 1. Press the A button to install Indexiine. 1. When the process completed, close the Homebrew Launcher to get back to your Wii U menu. diff --git a/translations/ko_KR/docs/user-guide/mocha/indexiine/nand-backup.md b/translations/ko_KR/docs/user-guide/mocha/indexiine/nand-backup.md index b0809c71c..88814cff8 100644 --- a/translations/ko_KR/docs/user-guide/mocha/indexiine/nand-backup.md +++ b/translations/ko_KR/docs/user-guide/mocha/indexiine/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/ko_KR/docs/user-guide/mocha/online-exploit/browser-exploit.md b/translations/ko_KR/docs/user-guide/mocha/online-exploit/browser-exploit.md index 8cbf2c754..30b7c94c5 100644 --- a/translations/ko_KR/docs/user-guide/mocha/online-exploit/browser-exploit.md +++ b/translations/ko_KR/docs/user-guide/mocha/online-exploit/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/ko_KR/docs/user-guide/mocha/online-exploit/nand-backup.md b/translations/ko_KR/docs/user-guide/mocha/online-exploit/nand-backup.md index 6513b4f51..adcbfaf3a 100644 --- a/translations/ko_KR/docs/user-guide/mocha/online-exploit/nand-backup.md +++ b/translations/ko_KR/docs/user-guide/mocha/online-exploit/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/ko_KR/docs/vwii/vwii-modding.md b/translations/ko_KR/docs/vwii/vwii-modding.md index c301b7b7f..64bdca1af 100644 --- a/translations/ko_KR/docs/vwii/vwii-modding.md +++ b/translations/ko_KR/docs/vwii/vwii-modding.md @@ -35,11 +35,11 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch the `Wii U NAND Dumper` application. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **optional** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **optional** + - Dump SLC: **optional** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **optional** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slccmpt.bin`, `otp.bin` and if you chose to go with a full backup, `seeprom.bin`, `slc.bin`, and `every mlc.bin.part` file to your computer. @@ -51,10 +51,10 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `A` to backup the Mii Channel and inject the Hackmii Installer then wait until it says Successfully injected wuphax!. - - You will be taken back to the Wii U Menu after a few seconds. + - You will be taken back to the Wii U Menu after a few seconds. 1. Launch vWii (the Wii Menu icon). 1. Launch the vWii Mii Channel. - - If Wuphax has successfully been injected, you will now see the scam warning screen. + - If Wuphax has successfully been injected, you will now see the scam warning screen. 1. Wait until you see `Press 1 to continue` and then press the `1` button. 1. Select `continue`, Install The Homebrew Channel and `Yes, continue`. 1. If The Homebrew Channel has successfully been installed, select `continue` and then `exit`. @@ -62,8 +62,8 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `B` to restore the Mii Channel then wait until it says Mii Channel restored!. - - You will be taken back to the Wii U Menu after a few seconds. - - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). + - You will be taken back to the Wii U Menu after a few seconds. + - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). ### Installing cIOSes @@ -75,19 +75,19 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch The Homebrew Channel. 1. Launch d2x cIOS Installer. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `56` - - Select cIOS slot: `249` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `56` + - Select cIOS slot: `249` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `57` - - Select cIOS slot: `250` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `57` + - Select cIOS slot: `250` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `58` - - Select cIOS slot: `251` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `58` + - Select cIOS slot: `251` 1. Press the `A` button to install. 1. Press the `B` button to exit. diff --git a/translations/ms_MY/docs/extras/block-updates.md b/translations/ms_MY/docs/extras/block-updates.md index 138f56793..6d1a63a79 100644 --- a/translations/ms_MY/docs/extras/block-updates.md +++ b/translations/ms_MY/docs/extras/block-updates.md @@ -30,8 +30,8 @@ Currently, two ways exist to block updates on the Wii U system: 1. Plug the SD Card into your Wii U console and power it on. 1. Enter the Wii U's system settings and navigate to `Internet > Connect to the Internet > Connection List >` `Your WiFi connection > Change Settings > DNS` and set the option to `Do not auto-obtain`. 1. You will be asked to input a primary and secondary DNS. Enter the following IP addresses: - - Primary DNS: 168.235.092.108 - - Secondary DNS: 081.004.127.020 DNS Block + - Primary DNS: 168.235.092.108 + - Secondary DNS: 081.004.127.020 DNS Block 1. Click on confirm. 1. You are now blocking updates. In order to access the eShop, run the NNUPatcher app from the Homebrew Launcher before launching the eShop. diff --git a/translations/ms_MY/docs/extras/configurable-payload.md b/translations/ms_MY/docs/extras/configurable-payload.md index 68e33baea..3068e9e1c 100644 --- a/translations/ms_MY/docs/extras/configurable-payload.md +++ b/translations/ms_MY/docs/extras/configurable-payload.md @@ -19,4 +19,4 @@ This payload is configurable, similar to Haxchi's configuration. This could be v 1. Extract the `Configurable_Payload.zip` file to the root of your SD Card. If it prompts you to overwrite the files on your SD Card, do so. 1. Place the SD Card into your Wii U and launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. If everything has been done correctly, you should be taken back to the Wii U Menu. Mocha has now been enabled and you can use the Homebrew Launcher Channel you installed earlier. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. diff --git a/translations/ms_MY/docs/extras/dump-games.md b/translations/ms_MY/docs/extras/dump-games.md index 63c7044ae..d7b48a17a 100644 --- a/translations/ms_MY/docs/extras/dump-games.md +++ b/translations/ms_MY/docs/extras/dump-games.md @@ -103,11 +103,11 @@ Dumping your Discs allows you to install a copy of your game to the system NAND/ 1. Plug in your USB device. The Wii U will ask you format it. Cancel with No! 1. Launch the Homebrew Launcher and start the MochaFAT32 app. 1. In the configuration menu, set the following settings: - - Config view mode: default - - Skip this menu on launch: on - - Don't relaunch OS: off - - Launch System Menu: on - - RedNAND: off + - Config view mode: default + - Skip this menu on launch: on + - Don't relaunch OS: off + - Launch System Menu: on + - RedNAND: off 1. Your console will load the Wii U menu with your USB device now replacing the SD Card. 1. Launch the Homebrew Launcher and open the disc2app app. 1. Eject any inserted game disc and press the A button to begin the dumping process. diff --git a/translations/ms_MY/docs/extras/dump-wii-games.md b/translations/ms_MY/docs/extras/dump-wii-games.md index db3692a09..1d98d4209 100644 --- a/translations/ms_MY/docs/extras/dump-wii-games.md +++ b/translations/ms_MY/docs/extras/dump-wii-games.md @@ -24,15 +24,15 @@ Dumping your Discs allows you to: play them on a Wii emulator (namely Dolphin), 1. Read the Disclaimer then press A. 1. Select Yes to enable Checksum Calculations. 1. Select either USB or Front SD depending on which device you want to use for the dumping process. - - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. + - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. 1. Press A to continue. 1. Select No on the screen that asks you to download redump.org DAT files. 1. Insert your disc then press A. 1. Go [on this page](https://wiki.dolphin-emu.org/index.php?title=Category:Dual_Layer_Disc_games) to see if your disc is dual-layered. 1. Set everything to match the following: - - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) - - Chunk Size: `Max` - - New device per chunk: `No` + - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) + - Chunk Size: `Max` + - New device per chunk: `No` 1. If you want to dump multiple discs, select Yes to remember your settings. If not, select No. ?> Be prepared to wait a while. The dumping process can take 30 minutes to 1 hour depending on your SD Card's speeds. diff --git a/translations/ms_MY/docs/troubleshooting/fix-errcode-112-1037.md b/translations/ms_MY/docs/troubleshooting/fix-errcode-112-1037.md index 98b8f454c..bce0e7fae 100644 --- a/translations/ms_MY/docs/troubleshooting/fix-errcode-112-1037.md +++ b/translations/ms_MY/docs/troubleshooting/fix-errcode-112-1037.md @@ -25,14 +25,14 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a command prompt window. 1. Use the following command: `cd `. - - Example: cd C:\Users\username\Downloads. + - Example: cd C:\Users\username\Downloads. 1. Use the following command: `py -3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. @@ -45,15 +45,15 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a Terminal window. 1. Use the following command: `cd `. - - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. - - On Linux, the most common place to find your downloaded files is /home/username/Downloads. + - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. + - On Linux, the most common place to find your downloaded files is /home/username/Downloads. 1. Use the following command: `python3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. diff --git a/translations/ms_MY/docs/user-guide/cbhc/browser-exploit.md b/translations/ms_MY/docs/user-guide/cbhc/browser-exploit.md index 6e1553c47..aa6e836d9 100644 --- a/translations/ms_MY/docs/user-guide/cbhc/browser-exploit.md +++ b/translations/ms_MY/docs/user-guide/cbhc/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/ms_MY/docs/user-guide/cbhc/nand-backup.md b/translations/ms_MY/docs/user-guide/cbhc/nand-backup.md index e24bdaf1b..e324b7a81 100644 --- a/translations/ms_MY/docs/user-guide/cbhc/nand-backup.md +++ b/translations/ms_MY/docs/user-guide/cbhc/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/ms_MY/docs/user-guide/haxchi/browser-exploit.md b/translations/ms_MY/docs/user-guide/haxchi/browser-exploit.md index 826e038f3..8853ba483 100644 --- a/translations/ms_MY/docs/user-guide/haxchi/browser-exploit.md +++ b/translations/ms_MY/docs/user-guide/haxchi/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/ms_MY/docs/user-guide/haxchi/nand-backup.md b/translations/ms_MY/docs/user-guide/haxchi/nand-backup.md index 75200207a..9d6d642ad 100644 --- a/translations/ms_MY/docs/user-guide/haxchi/nand-backup.md +++ b/translations/ms_MY/docs/user-guide/haxchi/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/ms_MY/docs/user-guide/mocha/indexiine/browser-exploit.md b/translations/ms_MY/docs/user-guide/mocha/indexiine/browser-exploit.md index 83505773d..c14364eb9 100644 --- a/translations/ms_MY/docs/user-guide/mocha/indexiine/browser-exploit.md +++ b/translations/ms_MY/docs/user-guide/mocha/indexiine/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/ms_MY/docs/user-guide/mocha/indexiine/browser-modding.md b/translations/ms_MY/docs/user-guide/mocha/indexiine/browser-modding.md index 2aa249f4c..2bdfe4a37 100644 --- a/translations/ms_MY/docs/user-guide/mocha/indexiine/browser-modding.md +++ b/translations/ms_MY/docs/user-guide/mocha/indexiine/browser-modding.md @@ -12,7 +12,7 @@ Now that you have your NAND backup in case anything goes wrong later, you can in 1. Turn on your Wii U. 1. Launch the internet browser and open the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. 1. Navigate through the Homebrew Launcher and launch the `Indexiine Installer` app. 1. Press the A button to install Indexiine. 1. When the process completed, close the Homebrew Launcher to get back to your Wii U menu. diff --git a/translations/ms_MY/docs/user-guide/mocha/indexiine/nand-backup.md b/translations/ms_MY/docs/user-guide/mocha/indexiine/nand-backup.md index b0809c71c..88814cff8 100644 --- a/translations/ms_MY/docs/user-guide/mocha/indexiine/nand-backup.md +++ b/translations/ms_MY/docs/user-guide/mocha/indexiine/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/ms_MY/docs/user-guide/mocha/online-exploit/browser-exploit.md b/translations/ms_MY/docs/user-guide/mocha/online-exploit/browser-exploit.md index 8cbf2c754..30b7c94c5 100644 --- a/translations/ms_MY/docs/user-guide/mocha/online-exploit/browser-exploit.md +++ b/translations/ms_MY/docs/user-guide/mocha/online-exploit/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/ms_MY/docs/user-guide/mocha/online-exploit/nand-backup.md b/translations/ms_MY/docs/user-guide/mocha/online-exploit/nand-backup.md index 6513b4f51..adcbfaf3a 100644 --- a/translations/ms_MY/docs/user-guide/mocha/online-exploit/nand-backup.md +++ b/translations/ms_MY/docs/user-guide/mocha/online-exploit/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/ms_MY/docs/vwii/vwii-modding.md b/translations/ms_MY/docs/vwii/vwii-modding.md index c301b7b7f..64bdca1af 100644 --- a/translations/ms_MY/docs/vwii/vwii-modding.md +++ b/translations/ms_MY/docs/vwii/vwii-modding.md @@ -35,11 +35,11 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch the `Wii U NAND Dumper` application. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **optional** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **optional** + - Dump SLC: **optional** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **optional** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slccmpt.bin`, `otp.bin` and if you chose to go with a full backup, `seeprom.bin`, `slc.bin`, and `every mlc.bin.part` file to your computer. @@ -51,10 +51,10 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `A` to backup the Mii Channel and inject the Hackmii Installer then wait until it says Successfully injected wuphax!. - - You will be taken back to the Wii U Menu after a few seconds. + - You will be taken back to the Wii U Menu after a few seconds. 1. Launch vWii (the Wii Menu icon). 1. Launch the vWii Mii Channel. - - If Wuphax has successfully been injected, you will now see the scam warning screen. + - If Wuphax has successfully been injected, you will now see the scam warning screen. 1. Wait until you see `Press 1 to continue` and then press the `1` button. 1. Select `continue`, Install The Homebrew Channel and `Yes, continue`. 1. If The Homebrew Channel has successfully been installed, select `continue` and then `exit`. @@ -62,8 +62,8 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `B` to restore the Mii Channel then wait until it says Mii Channel restored!. - - You will be taken back to the Wii U Menu after a few seconds. - - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). + - You will be taken back to the Wii U Menu after a few seconds. + - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). ### Installing cIOSes @@ -75,19 +75,19 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch The Homebrew Channel. 1. Launch d2x cIOS Installer. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `56` - - Select cIOS slot: `249` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `56` + - Select cIOS slot: `249` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `57` - - Select cIOS slot: `250` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `57` + - Select cIOS slot: `250` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `58` - - Select cIOS slot: `251` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `58` + - Select cIOS slot: `251` 1. Press the `A` button to install. 1. Press the `B` button to exit. diff --git a/translations/nl_NL/docs/extras/block-updates.md b/translations/nl_NL/docs/extras/block-updates.md index 138f56793..6d1a63a79 100644 --- a/translations/nl_NL/docs/extras/block-updates.md +++ b/translations/nl_NL/docs/extras/block-updates.md @@ -30,8 +30,8 @@ Currently, two ways exist to block updates on the Wii U system: 1. Plug the SD Card into your Wii U console and power it on. 1. Enter the Wii U's system settings and navigate to `Internet > Connect to the Internet > Connection List >` `Your WiFi connection > Change Settings > DNS` and set the option to `Do not auto-obtain`. 1. You will be asked to input a primary and secondary DNS. Enter the following IP addresses: - - Primary DNS: 168.235.092.108 - - Secondary DNS: 081.004.127.020 DNS Block + - Primary DNS: 168.235.092.108 + - Secondary DNS: 081.004.127.020 DNS Block 1. Click on confirm. 1. You are now blocking updates. In order to access the eShop, run the NNUPatcher app from the Homebrew Launcher before launching the eShop. diff --git a/translations/nl_NL/docs/extras/configurable-payload.md b/translations/nl_NL/docs/extras/configurable-payload.md index 68e33baea..3068e9e1c 100644 --- a/translations/nl_NL/docs/extras/configurable-payload.md +++ b/translations/nl_NL/docs/extras/configurable-payload.md @@ -19,4 +19,4 @@ This payload is configurable, similar to Haxchi's configuration. This could be v 1. Extract the `Configurable_Payload.zip` file to the root of your SD Card. If it prompts you to overwrite the files on your SD Card, do so. 1. Place the SD Card into your Wii U and launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. If everything has been done correctly, you should be taken back to the Wii U Menu. Mocha has now been enabled and you can use the Homebrew Launcher Channel you installed earlier. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. diff --git a/translations/nl_NL/docs/extras/dump-games.md b/translations/nl_NL/docs/extras/dump-games.md index 63c7044ae..d7b48a17a 100644 --- a/translations/nl_NL/docs/extras/dump-games.md +++ b/translations/nl_NL/docs/extras/dump-games.md @@ -103,11 +103,11 @@ Dumping your Discs allows you to install a copy of your game to the system NAND/ 1. Plug in your USB device. The Wii U will ask you format it. Cancel with No! 1. Launch the Homebrew Launcher and start the MochaFAT32 app. 1. In the configuration menu, set the following settings: - - Config view mode: default - - Skip this menu on launch: on - - Don't relaunch OS: off - - Launch System Menu: on - - RedNAND: off + - Config view mode: default + - Skip this menu on launch: on + - Don't relaunch OS: off + - Launch System Menu: on + - RedNAND: off 1. Your console will load the Wii U menu with your USB device now replacing the SD Card. 1. Launch the Homebrew Launcher and open the disc2app app. 1. Eject any inserted game disc and press the A button to begin the dumping process. diff --git a/translations/nl_NL/docs/extras/dump-wii-games.md b/translations/nl_NL/docs/extras/dump-wii-games.md index db3692a09..1d98d4209 100644 --- a/translations/nl_NL/docs/extras/dump-wii-games.md +++ b/translations/nl_NL/docs/extras/dump-wii-games.md @@ -24,15 +24,15 @@ Dumping your Discs allows you to: play them on a Wii emulator (namely Dolphin), 1. Read the Disclaimer then press A. 1. Select Yes to enable Checksum Calculations. 1. Select either USB or Front SD depending on which device you want to use for the dumping process. - - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. + - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. 1. Press A to continue. 1. Select No on the screen that asks you to download redump.org DAT files. 1. Insert your disc then press A. 1. Go [on this page](https://wiki.dolphin-emu.org/index.php?title=Category:Dual_Layer_Disc_games) to see if your disc is dual-layered. 1. Set everything to match the following: - - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) - - Chunk Size: `Max` - - New device per chunk: `No` + - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) + - Chunk Size: `Max` + - New device per chunk: `No` 1. If you want to dump multiple discs, select Yes to remember your settings. If not, select No. ?> Be prepared to wait a while. The dumping process can take 30 minutes to 1 hour depending on your SD Card's speeds. diff --git a/translations/nl_NL/docs/troubleshooting/fix-errcode-112-1037.md b/translations/nl_NL/docs/troubleshooting/fix-errcode-112-1037.md index 98b8f454c..bce0e7fae 100644 --- a/translations/nl_NL/docs/troubleshooting/fix-errcode-112-1037.md +++ b/translations/nl_NL/docs/troubleshooting/fix-errcode-112-1037.md @@ -25,14 +25,14 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a command prompt window. 1. Use the following command: `cd `. - - Example: cd C:\Users\username\Downloads. + - Example: cd C:\Users\username\Downloads. 1. Use the following command: `py -3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. @@ -45,15 +45,15 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a Terminal window. 1. Use the following command: `cd `. - - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. - - On Linux, the most common place to find your downloaded files is /home/username/Downloads. + - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. + - On Linux, the most common place to find your downloaded files is /home/username/Downloads. 1. Use the following command: `python3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. diff --git a/translations/nl_NL/docs/user-guide/cbhc/browser-exploit.md b/translations/nl_NL/docs/user-guide/cbhc/browser-exploit.md index 6e1553c47..aa6e836d9 100644 --- a/translations/nl_NL/docs/user-guide/cbhc/browser-exploit.md +++ b/translations/nl_NL/docs/user-guide/cbhc/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/nl_NL/docs/user-guide/cbhc/nand-backup.md b/translations/nl_NL/docs/user-guide/cbhc/nand-backup.md index e24bdaf1b..e324b7a81 100644 --- a/translations/nl_NL/docs/user-guide/cbhc/nand-backup.md +++ b/translations/nl_NL/docs/user-guide/cbhc/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/nl_NL/docs/user-guide/haxchi/browser-exploit.md b/translations/nl_NL/docs/user-guide/haxchi/browser-exploit.md index 826e038f3..8853ba483 100644 --- a/translations/nl_NL/docs/user-guide/haxchi/browser-exploit.md +++ b/translations/nl_NL/docs/user-guide/haxchi/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/nl_NL/docs/user-guide/haxchi/nand-backup.md b/translations/nl_NL/docs/user-guide/haxchi/nand-backup.md index 75200207a..9d6d642ad 100644 --- a/translations/nl_NL/docs/user-guide/haxchi/nand-backup.md +++ b/translations/nl_NL/docs/user-guide/haxchi/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/nl_NL/docs/user-guide/mocha/indexiine/browser-exploit.md b/translations/nl_NL/docs/user-guide/mocha/indexiine/browser-exploit.md index 83505773d..c14364eb9 100644 --- a/translations/nl_NL/docs/user-guide/mocha/indexiine/browser-exploit.md +++ b/translations/nl_NL/docs/user-guide/mocha/indexiine/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/nl_NL/docs/user-guide/mocha/indexiine/browser-modding.md b/translations/nl_NL/docs/user-guide/mocha/indexiine/browser-modding.md index 2aa249f4c..2bdfe4a37 100644 --- a/translations/nl_NL/docs/user-guide/mocha/indexiine/browser-modding.md +++ b/translations/nl_NL/docs/user-guide/mocha/indexiine/browser-modding.md @@ -12,7 +12,7 @@ Now that you have your NAND backup in case anything goes wrong later, you can in 1. Turn on your Wii U. 1. Launch the internet browser and open the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. 1. Navigate through the Homebrew Launcher and launch the `Indexiine Installer` app. 1. Press the A button to install Indexiine. 1. When the process completed, close the Homebrew Launcher to get back to your Wii U menu. diff --git a/translations/nl_NL/docs/user-guide/mocha/indexiine/nand-backup.md b/translations/nl_NL/docs/user-guide/mocha/indexiine/nand-backup.md index b0809c71c..88814cff8 100644 --- a/translations/nl_NL/docs/user-guide/mocha/indexiine/nand-backup.md +++ b/translations/nl_NL/docs/user-guide/mocha/indexiine/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/nl_NL/docs/user-guide/mocha/online-exploit/browser-exploit.md b/translations/nl_NL/docs/user-guide/mocha/online-exploit/browser-exploit.md index 8cbf2c754..30b7c94c5 100644 --- a/translations/nl_NL/docs/user-guide/mocha/online-exploit/browser-exploit.md +++ b/translations/nl_NL/docs/user-guide/mocha/online-exploit/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/nl_NL/docs/user-guide/mocha/online-exploit/nand-backup.md b/translations/nl_NL/docs/user-guide/mocha/online-exploit/nand-backup.md index 6513b4f51..adcbfaf3a 100644 --- a/translations/nl_NL/docs/user-guide/mocha/online-exploit/nand-backup.md +++ b/translations/nl_NL/docs/user-guide/mocha/online-exploit/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/nl_NL/docs/vwii/vwii-modding.md b/translations/nl_NL/docs/vwii/vwii-modding.md index c301b7b7f..64bdca1af 100644 --- a/translations/nl_NL/docs/vwii/vwii-modding.md +++ b/translations/nl_NL/docs/vwii/vwii-modding.md @@ -35,11 +35,11 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch the `Wii U NAND Dumper` application. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **optional** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **optional** + - Dump SLC: **optional** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **optional** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slccmpt.bin`, `otp.bin` and if you chose to go with a full backup, `seeprom.bin`, `slc.bin`, and `every mlc.bin.part` file to your computer. @@ -51,10 +51,10 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `A` to backup the Mii Channel and inject the Hackmii Installer then wait until it says Successfully injected wuphax!. - - You will be taken back to the Wii U Menu after a few seconds. + - You will be taken back to the Wii U Menu after a few seconds. 1. Launch vWii (the Wii Menu icon). 1. Launch the vWii Mii Channel. - - If Wuphax has successfully been injected, you will now see the scam warning screen. + - If Wuphax has successfully been injected, you will now see the scam warning screen. 1. Wait until you see `Press 1 to continue` and then press the `1` button. 1. Select `continue`, Install The Homebrew Channel and `Yes, continue`. 1. If The Homebrew Channel has successfully been installed, select `continue` and then `exit`. @@ -62,8 +62,8 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `B` to restore the Mii Channel then wait until it says Mii Channel restored!. - - You will be taken back to the Wii U Menu after a few seconds. - - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). + - You will be taken back to the Wii U Menu after a few seconds. + - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). ### Installing cIOSes @@ -75,19 +75,19 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch The Homebrew Channel. 1. Launch d2x cIOS Installer. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `56` - - Select cIOS slot: `249` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `56` + - Select cIOS slot: `249` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `57` - - Select cIOS slot: `250` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `57` + - Select cIOS slot: `250` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `58` - - Select cIOS slot: `251` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `58` + - Select cIOS slot: `251` 1. Press the `A` button to install. 1. Press the `B` button to exit. diff --git a/translations/no_NO/docs/extras/block-updates.md b/translations/no_NO/docs/extras/block-updates.md index 297b0d1bb..26555c619 100644 --- a/translations/no_NO/docs/extras/block-updates.md +++ b/translations/no_NO/docs/extras/block-updates.md @@ -30,8 +30,8 @@ For tiden finnes det to måter å blokkere systemoppdateringer på Wii U: 1. Sett SD-kortet inn i Wii U konsollen din og skru den på. 1. På Wii U konsollen, gå inn på systeminnstillinger og naviger til `Internet > Connect to the Internet > Connection List >` `Your WiFi connection > Change Settings > DNS` og sett den til `Do not auto-obtain`. 1. Du vil bli bedt om å legge inn en primær og sekundær DNS. Oppgi følgende IP adresser: - - Primary DNS: 168.235.092.108 - - Secondary DNS: 081.004.127.020 DNS-blokkering + - Primary DNS: 168.235.092.108 + - Secondary DNS: 081.004.127.020 DNS-blokkering 1. Klikk på "confirm". 1. Du blokkerer nå systemoppdateringer. Men for å få tilgang til eShop igjen, må du starte nnu-patcher appen fra Homebrew Launcher før du starter eShop. diff --git a/translations/no_NO/docs/extras/configurable-payload.md b/translations/no_NO/docs/extras/configurable-payload.md index 7452a01ce..80b220d89 100644 --- a/translations/no_NO/docs/extras/configurable-payload.md +++ b/translations/no_NO/docs/extras/configurable-payload.md @@ -19,4 +19,4 @@ Denne payloaden er konfigurerbar, lignende Haxchi sin config. Dette kan være ny 1. Pakk ut `Configurable_Payload.zip` til roten av SD-kortet. La den overskrive filer på SD kortet ditt om den ber om det. 1. Sett inn SD kortet i Wii U'en, start nettleseren og gå til `wiiuexploit.xyz`. 1. Klikk på `Run Homebrew Launcher!`. Hvis alt er gjort riktig, skal du ende tilbake til Wii U menyen. Mocha er nå aktivert og du kan bruke Homebrew Launcher Kanalen som du installerte tidligere. - - Hvis Wii U konsollen blir sittende fast på en hvit eller fryst skjerm, vent noen få sekunder. Hvis ingenting skjer, start konsollen på nytt og [tilbakestill nettleserens lagringsdata](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) og prøv igjen. + - Hvis Wii U konsollen blir sittende fast på en hvit eller fryst skjerm, vent noen få sekunder. Hvis ingenting skjer, start konsollen på nytt og [tilbakestill nettleserens lagringsdata](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) og prøv igjen. diff --git a/translations/no_NO/docs/extras/dump-games.md b/translations/no_NO/docs/extras/dump-games.md index 0c7baa7de..4fbf2e121 100644 --- a/translations/no_NO/docs/extras/dump-games.md +++ b/translations/no_NO/docs/extras/dump-games.md @@ -103,11 +103,11 @@ Ved å Dumpe en Wii U Disk, kan du installere en kopi av spillet til system NAND 1. Koble til USB-pennen. Wii U'en vil spørre deg om å formatere den. Avbryt med å klikke "No"! 1. Start Homebrew Launcher og kjør MochaFAT32 appen. 1. Bruk disse instillingene i menyen: - - Config view mode: default - - Skip this menu on launch: on - - Don't relaunch OS: off - - Launch System Menu: on - - RedNAND: off + - Config view mode: default + - Skip this menu on launch: on + - Don't relaunch OS: off + - Launch System Menu: on + - RedNAND: off 1. Konsollen vil gå tilbake til Wii U-menyen og erstatte SD kortet med USB-pennen. 1. Start Homebrew Launcher og kjør disc2app. 1. Ta ut spill-disken hvis du allerede har satt den inn i konsollen og trykk på A knappen for å starte dumping-prosessen. diff --git a/translations/no_NO/docs/extras/dump-wii-games.md b/translations/no_NO/docs/extras/dump-wii-games.md index 2ad5509c5..434ad159c 100644 --- a/translations/no_NO/docs/extras/dump-wii-games.md +++ b/translations/no_NO/docs/extras/dump-wii-games.md @@ -24,15 +24,15 @@ Dumping av Wii diskene dine lar deg spille dem på en Wii-emulator (Dolphin), sp 1. Les ansvarsfraskrivelsen og trykk A. 1. Velg "Yes" for å aktivere Checksum kalkulasjoner. 1. Velg enten USB eller SD-kort avhengig av hvilken enhet du vil bruke for dumpeprosessen. - - Merk at enheten du velger må være formatert som FAT32 eller NTFS. + - Merk at enheten du velger må være formatert som FAT32 eller NTFS. 1. Trykk A for å fortsette. 1. Velg "No" i vinduet som ber deg laste ned redump.org DAT-filer. 1. Sett inn Wii disken din og trykk A. 1. Gå til [denne siden](https://wiki.dolphin-emu.org/index.php?title=Category:Dual_Layer_Disc_games) for å se om Wii disken din er dual-layered. 1. Velg følgende instillinger: - - Dual Layer: `Yes/No` (Velg `Yes` hvis Wii disken din er dual-layered) - - Chunk Size: `Max` - - New device per chunk: `No` + - Dual Layer: `Yes/No` (Velg `Yes` hvis Wii disken din er dual-layered) + - Chunk Size: `Max` + - New device per chunk: `No` 1. Dersom du ønsker å dumpe flere Wii disker, velg "Yes" for å huske innstillingene dine. Hvis ikke, velg "No". ?> Vær forberedt på å vente en stund. Dumpeprosessen kan ta rundt 30 til 60 minutter avhengig av hastigheten på SD-kortet ditt. diff --git a/translations/no_NO/docs/troubleshooting/fix-errcode-112-1037.md b/translations/no_NO/docs/troubleshooting/fix-errcode-112-1037.md index c380c9ea0..4cb26e0bf 100644 --- a/translations/no_NO/docs/troubleshooting/fix-errcode-112-1037.md +++ b/translations/no_NO/docs/troubleshooting/fix-errcode-112-1037.md @@ -25,14 +25,14 @@ Denne siden vil hjelpe deg med å fikse feilkode 112-1037. 1. Gå tilbake til Wii U-menyen. 1. Åpne opp et Command Prompt vindu. 1. Skriv: `cd `. - - Eksempel: cd C:\Brukere\brukernavn\Nedlastninger. + - Eksempel: cd C:\Brukere\brukernavn\Nedlastninger. 1. Skriv: `py -3 -i wupclient.py`. 1. Skriv inn IP-adressen til Wii U konsollen. - - Usikker på hvor du finner det? Les [dette](find-wiiu-ip-address). + - Usikker på hvor du finner det? Les [dette](find-wiiu-ip-address). 1. Bruk riktig kommando avhengig av regionen til konsollen: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. Hvis kommandoen fungerte, vil du få følgende svar: `chmod returned 0x0`. 1. Feilkoden skal nå være borte. @@ -45,15 +45,15 @@ Denne siden vil hjelpe deg med å fikse feilkode 112-1037. 1. Gå tilbake til Wii U-menyen. 1. Åpne opp et terminalvindu. 1. Skriv: `cd `. - - På macOS er det vanligste stedet å finne nedlastede filer i /Brukere/brukernavn/Nedlastninger. - - På Linux er det vanligste stedet å finne nedlastede filer i /home/username/Downloads. + - På macOS er det vanligste stedet å finne nedlastede filer i /Brukere/brukernavn/Nedlastninger. + - På Linux er det vanligste stedet å finne nedlastede filer i /home/username/Downloads. 1. Skriv: `py -3 -i wupclient.py`. 1. Skriv inn IP-adressen til Wii U konsollen. - - Usikker på hvor du finner det? Les [dette](find-wiiu-ip-address). + - Usikker på hvor du finner det? Les [dette](find-wiiu-ip-address). 1. Bruk riktig kommando avhengig av regionen til konsollen: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. Hvis kommandoen fungerte, vil du få følgende svar: `chmod returned 0x0`. 1. Feilkoden skal nå være borte. diff --git a/translations/no_NO/docs/user-guide/cbhc/browser-exploit.md b/translations/no_NO/docs/user-guide/cbhc/browser-exploit.md index 9a6c2e372..32f67e9a3 100644 --- a/translations/no_NO/docs/user-guide/cbhc/browser-exploit.md +++ b/translations/no_NO/docs/user-guide/cbhc/browser-exploit.md @@ -9,4 +9,4 @@ For å installere CFW, må vi først starte Homebrew Launcher gjennom nettlesere 1. Ta SD-kortet ut av PC'en og sett den inn i Wii U konsollen. 1. Start nettleseren og gå til `wiiuexploit.xyz`. 1. Klikk på `Run Homebrew Launcher!`. Konsollen skal starte Homebrew Launcher. - - Hvis Wii U konsollen blir sittende fast på en hvit eller fryst skjerm, vent noen få sekunder. Hvis ingenting skjer, start konsollen på nytt og [tilbakestill nettleserens lagringsdata](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) og prøv igjen. \ No newline at end of file + - Hvis Wii U konsollen blir sittende fast på en hvit eller fryst skjerm, vent noen få sekunder. Hvis ingenting skjer, start konsollen på nytt og [tilbakestill nettleserens lagringsdata](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) og prøv igjen. \ No newline at end of file diff --git a/translations/no_NO/docs/user-guide/cbhc/nand-backup.md b/translations/no_NO/docs/user-guide/cbhc/nand-backup.md index c62506c18..bc2f95499 100644 --- a/translations/no_NO/docs/user-guide/cbhc/nand-backup.md +++ b/translations/no_NO/docs/user-guide/cbhc/nand-backup.md @@ -12,11 +12,11 @@ Hvis noe går galt senere i prosessen og Wii U konsollen "bricker", vil gjenoppr 1. Gå til Homebrew Launcher og kjør `Wii U NAND Dumper` appen. 1. Bruk D-padden for å sette opp følgende konfigurasjon: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Trykk på A knappen for å starte dumpingprosessen. 1. Når prosessen er fullført, skru av Wii U konsollen, ta ut SD-kortet og sett den inn i PC-en din. 1. For å forsikre deg om at du ikke mister filene, kopier `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp. ` og hvis du valgte å gå for full sikkerhetskopi, `hver mlc.bin.part` til PC'en din. diff --git a/translations/no_NO/docs/user-guide/haxchi/browser-exploit.md b/translations/no_NO/docs/user-guide/haxchi/browser-exploit.md index 4154e774c..8fe3b006a 100644 --- a/translations/no_NO/docs/user-guide/haxchi/browser-exploit.md +++ b/translations/no_NO/docs/user-guide/haxchi/browser-exploit.md @@ -9,4 +9,4 @@ For å installere CFW, må vi først starte Homebrew Launcher gjennom nettlesere 1. Ta SD-kortet ut av PC'en og sett den inn i Wii U konsollen. 1. Start nettleseren og gå til `wiiuexploit.xyz`. 1. Klikk på `Run Homebrew Launcher!`. Konsollen skal starte Homebrew Launcher. - - Hvis Wii U konsollen blir sittende fast på en hvit eller fryst skjerm, vent noen få sekunder. Hvis ingenting skjer, start konsollen på nytt og [tilbakestill nettleserens lagringsdata](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) og prøv igjen. \ No newline at end of file + - Hvis Wii U konsollen blir sittende fast på en hvit eller fryst skjerm, vent noen få sekunder. Hvis ingenting skjer, start konsollen på nytt og [tilbakestill nettleserens lagringsdata](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) og prøv igjen. \ No newline at end of file diff --git a/translations/no_NO/docs/user-guide/haxchi/nand-backup.md b/translations/no_NO/docs/user-guide/haxchi/nand-backup.md index e0d70ddc0..ad51014fa 100644 --- a/translations/no_NO/docs/user-guide/haxchi/nand-backup.md +++ b/translations/no_NO/docs/user-guide/haxchi/nand-backup.md @@ -12,11 +12,11 @@ Hvis noe går galt senere i prosessen og Wii U konsollen "bricker", vil gjenoppr 1. Gå til Homebrew Launcher og kjør `Wii U NAND Dumper` appen. 1. Bruk D-padden for å sette opp følgende konfigurasjon: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Trykk på A knappen for å starte dumpingprosessen. 1. Når prosessen er fullført, skru av Wii U konsollen, ta ut SD-kortet og sett den inn i PC-en din. 1. For å forsikre deg om at du ikke mister filene, kopier `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp. ` og hvis du valgte å gå for full sikkerhetskopi, `hver mlc.bin.part` til PC'en din. diff --git a/translations/no_NO/docs/user-guide/mocha/indexiine/browser-exploit.md b/translations/no_NO/docs/user-guide/mocha/indexiine/browser-exploit.md index 4b519d6f5..7365a85d4 100644 --- a/translations/no_NO/docs/user-guide/mocha/indexiine/browser-exploit.md +++ b/translations/no_NO/docs/user-guide/mocha/indexiine/browser-exploit.md @@ -9,4 +9,4 @@ For å installere CFW, må vi først starte Homebrew Launcher gjennom nettlesere 1. Ta SD-kortet ut av PC'en og sett den inn i Wii U konsollen. 1. Start nettleseren og gå til `wiiuexploit.xyz`. 1. Klikk på `Run Homebrew Launcher!`. Konsollen skal starte Homebrew Launcher. - - Hvis Wii U konsollen blir sittende fast på en hvit eller fryst skjerm, vent noen få sekunder. Hvis ingenting skjer, start konsollen på nytt og [tilbakestill nettleserens lagringsdata](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) og prøv igjen. \ No newline at end of file + - Hvis Wii U konsollen blir sittende fast på en hvit eller fryst skjerm, vent noen få sekunder. Hvis ingenting skjer, start konsollen på nytt og [tilbakestill nettleserens lagringsdata](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) og prøv igjen. \ No newline at end of file diff --git a/translations/no_NO/docs/user-guide/mocha/indexiine/browser-modding.md b/translations/no_NO/docs/user-guide/mocha/indexiine/browser-modding.md index 6cecb8a96..7ed01f82b 100644 --- a/translations/no_NO/docs/user-guide/mocha/indexiine/browser-modding.md +++ b/translations/no_NO/docs/user-guide/mocha/indexiine/browser-modding.md @@ -12,7 +12,7 @@ Nå som du har en NAND backup i tilfelle noe går galt senere, kan du installere 1. Slå på Wii U konsollen. 1. Start nettleseren og gå til nettsiden `wiiuexploit.xyz`. 1. Klikk på `Run Homebrew Launcher!`. Konsollen skal starte Homebrew Launcher. - - Hvis Wii U konsollen blir sittende fast på en hvit eller fryst skjerm, vent noen få sekunder. Hvis ingenting skjer, start konsollen på nytt og [tilbakestill nettleserens lagringsdata](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) og prøv igjen. + - Hvis Wii U konsollen blir sittende fast på en hvit eller fryst skjerm, vent noen få sekunder. Hvis ingenting skjer, start konsollen på nytt og [tilbakestill nettleserens lagringsdata](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) og prøv igjen. 1. Gå til Homebrew Launcher og kjør `Indexiine Installer` appen. 1. Trykk på A knappen for å installere Indexiine. 1. Når prosessen er ferdig, lukk Homebrew Launcher for å gå tilbake til Wii U menyen. diff --git a/translations/no_NO/docs/user-guide/mocha/indexiine/nand-backup.md b/translations/no_NO/docs/user-guide/mocha/indexiine/nand-backup.md index caa48dbf4..17a6e4d9e 100644 --- a/translations/no_NO/docs/user-guide/mocha/indexiine/nand-backup.md +++ b/translations/no_NO/docs/user-guide/mocha/indexiine/nand-backup.md @@ -12,11 +12,11 @@ Hvis noe går galt senere i prosessen og Wii U konsollen "bricker", vil gjenoppr 1. Gå til Homebrew Launcher og kjør `Wii U NAND Dumper` appen. 1. Bruk D-padden for å sette opp følgende konfigurasjon: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Trykk på A knappen for å starte dumpingprosessen. 1. Når prosessen er fullført, skru av Wii U konsollen, ta ut SD-kortet og sett den inn i PC-en din. 1. For å forsikre deg om at du ikke mister filene, kopier `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp. ` og hvis du valgte å gå for full sikkerhetskopi, `hver mlc.bin.part` til PC'en din. diff --git a/translations/no_NO/docs/user-guide/mocha/online-exploit/browser-exploit.md b/translations/no_NO/docs/user-guide/mocha/online-exploit/browser-exploit.md index 65eb197f2..346a36cbd 100644 --- a/translations/no_NO/docs/user-guide/mocha/online-exploit/browser-exploit.md +++ b/translations/no_NO/docs/user-guide/mocha/online-exploit/browser-exploit.md @@ -9,4 +9,4 @@ For å installere CFW, må vi først starte Homebrew Launcher gjennom nettlesere 1. Ta SD-kortet ut av PC'en og sett den inn i Wii U konsollen. 1. Start nettleseren og gå til `wiiuexploit.xyz`. 1. Klikk på `Run Homebrew Launcher!`. Konsollen skal starte Homebrew Launcher. - - Hvis Wii U konsollen blir sittende fast på en hvit eller fryst skjerm, vent noen få sekunder. Hvis ingenting skjer, start konsollen på nytt og [tilbakestill nettleserens lagringsdata](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) og prøv igjen. \ No newline at end of file + - Hvis Wii U konsollen blir sittende fast på en hvit eller fryst skjerm, vent noen få sekunder. Hvis ingenting skjer, start konsollen på nytt og [tilbakestill nettleserens lagringsdata](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) og prøv igjen. \ No newline at end of file diff --git a/translations/no_NO/docs/user-guide/mocha/online-exploit/nand-backup.md b/translations/no_NO/docs/user-guide/mocha/online-exploit/nand-backup.md index 02ef6193d..548f7123c 100644 --- a/translations/no_NO/docs/user-guide/mocha/online-exploit/nand-backup.md +++ b/translations/no_NO/docs/user-guide/mocha/online-exploit/nand-backup.md @@ -12,11 +12,11 @@ Hvis noe går galt senere i prosessen og Wii U konsollen "bricker", vil gjenoppr 1. Gå til Homebrew Launcher og kjør `Wii U NAND Dumper` appen. 1. Bruk D-padden for å sette opp følgende konfigurasjon: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Trykk på A knappen for å starte dumpingprosessen. 1. Når prosessen er fullført, skru av Wii U konsollen, ta ut SD-kortet og sett den inn i PC-en din. 1. For å forsikre deg om at du ikke mister filene, kopier `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp. ` og hvis du valgte å gå for full sikkerhetskopi, `hver mlc.bin.part` til PC'en din. diff --git a/translations/no_NO/docs/vwii/vwii-modding.md b/translations/no_NO/docs/vwii/vwii-modding.md index 65a70cbe2..31c885925 100644 --- a/translations/no_NO/docs/vwii/vwii-modding.md +++ b/translations/no_NO/docs/vwii/vwii-modding.md @@ -35,11 +35,11 @@ Hvis noe går galt senere i prosessen og vWii "bricker", vil gjenoppretting av e 1. Start [Homebrew Launcher](vwii/browser-exploit). 1. Kjør `Wii U NAND Dumper`. 1. Bruk D-padden for å sette opp følgende konfigurasjon: - - Dump SLC: **optional** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **optional** + - Dump SLC: **optional** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **optional** 1. Trykk på A knappen for å starte dumpingprosessen. 1. Når prosessen er fullført, skru av Wii U konsollen, ta ut SD-kortet og sett den inn i PC-en din. 1. For å være sikker på at du ikke mister filene, kopier `slccmpt.bin`, `otp.bin` og hvis du velger å ta en full backup, `seeprom.bin`, `slc.bin`, og `alle mlc.bin.part` filene til pc'en din. @@ -51,10 +51,10 @@ Hvis noe går galt senere i prosessen og vWii "bricker", vil gjenoppretting av e 1. Start [Homebrew Launcher](vwii/browser-exploit). 1. Kjør Wuphax. 1. Trykk `A` for å lage en backup av "Mii Channel" så installer du Hackmii og venter til det står Successfully injected wuphax!. - - Du vil bli sendt tilbake til Wii U menyen etter noen sekunder. + - Du vil bli sendt tilbake til Wii U menyen etter noen sekunder. 1. Start vWii (Wii meny ikonet). 1. Start vWii Mii Channel. - - Hvis Wuphax ble installert riktig, vil du nå se en advarselskjerm om scamming. + - Hvis Wuphax ble installert riktig, vil du nå se en advarselskjerm om scamming. 1. Vent til du ser `Press 1 to continue` og trykk `1` knappen. 1. Trykk på `continue`, Install The Homebrew Channel og `Yes, continue`. 1. Når Homebrew Channel har blitt installert, velger du `continue` og så `exit`. @@ -62,8 +62,8 @@ Hvis noe går galt senere i prosessen og vWii "bricker", vil gjenoppretting av e 1. Start [Homebrew Launcher](vwii/browser-exploit). 1. Kjør Wuphax. 1. Trykk `B` for å gjenopprette "Mii Channel" og vent til det står Mii Channel restored!. - - Du vil bli sendt tilbake til Wii U menyen etter noen sekunder. - - Hvis du av en eller annen grunn ikke kan gjenopprette sikkerhetskopien, må du [reinstallere Mii Channel](recover-vwii-ioses-channels). + - Du vil bli sendt tilbake til Wii U menyen etter noen sekunder. + - Hvis du av en eller annen grunn ikke kan gjenopprette sikkerhetskopien, må du [reinstallere Mii Channel](recover-vwii-ioses-channels). ### Installerer cIOS'er @@ -75,19 +75,19 @@ Hvis noe går galt senere i prosessen og vWii "bricker", vil gjenoppretting av e 1. Start Homebrew Channel. 1. Kjør d2x cIOS Installer. 1. Velg følgende instillinger: - - Velg cIOS `v10 d2x-v10-beta52-vWii` - - Velg cIOS base `56` - - Velg cIOS slot `249` + - Velg cIOS `v10 d2x-v10-beta52-vWii` + - Velg cIOS base `56` + - Velg cIOS slot `249` 1. Trykk på `A`-knappen for å installere dem. 1. Velg følgende instillinger: - - Velg cIOS `v10 d2x-v10-beta52-vWii` - - Velg cIOS base `57` - - Velg cIOS slot `250` + - Velg cIOS `v10 d2x-v10-beta52-vWii` + - Velg cIOS base `57` + - Velg cIOS slot `250` 1. Trykk på `A`-knappen for å installere dem. 1. Velg følgende instillinger: - - Velg cIOS `v10 d2x-v10-beta52-vWii` - - Velg cIOS base `58` - - Velg cIOS slot `251` + - Velg cIOS `v10 d2x-v10-beta52-vWii` + - Velg cIOS base `58` + - Velg cIOS slot `251` 1. Trykk på `A`-knappen for å installere dem. 1. Trykk på `B`-knappen for å avslutte. diff --git a/translations/pl_PL/docs/extras/block-updates.md b/translations/pl_PL/docs/extras/block-updates.md index 138f56793..6d1a63a79 100644 --- a/translations/pl_PL/docs/extras/block-updates.md +++ b/translations/pl_PL/docs/extras/block-updates.md @@ -30,8 +30,8 @@ Currently, two ways exist to block updates on the Wii U system: 1. Plug the SD Card into your Wii U console and power it on. 1. Enter the Wii U's system settings and navigate to `Internet > Connect to the Internet > Connection List >` `Your WiFi connection > Change Settings > DNS` and set the option to `Do not auto-obtain`. 1. You will be asked to input a primary and secondary DNS. Enter the following IP addresses: - - Primary DNS: 168.235.092.108 - - Secondary DNS: 081.004.127.020 DNS Block + - Primary DNS: 168.235.092.108 + - Secondary DNS: 081.004.127.020 DNS Block 1. Click on confirm. 1. You are now blocking updates. In order to access the eShop, run the NNUPatcher app from the Homebrew Launcher before launching the eShop. diff --git a/translations/pl_PL/docs/extras/configurable-payload.md b/translations/pl_PL/docs/extras/configurable-payload.md index 68e33baea..3068e9e1c 100644 --- a/translations/pl_PL/docs/extras/configurable-payload.md +++ b/translations/pl_PL/docs/extras/configurable-payload.md @@ -19,4 +19,4 @@ This payload is configurable, similar to Haxchi's configuration. This could be v 1. Extract the `Configurable_Payload.zip` file to the root of your SD Card. If it prompts you to overwrite the files on your SD Card, do so. 1. Place the SD Card into your Wii U and launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. If everything has been done correctly, you should be taken back to the Wii U Menu. Mocha has now been enabled and you can use the Homebrew Launcher Channel you installed earlier. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. diff --git a/translations/pl_PL/docs/extras/dump-games.md b/translations/pl_PL/docs/extras/dump-games.md index 63c7044ae..d7b48a17a 100644 --- a/translations/pl_PL/docs/extras/dump-games.md +++ b/translations/pl_PL/docs/extras/dump-games.md @@ -103,11 +103,11 @@ Dumping your Discs allows you to install a copy of your game to the system NAND/ 1. Plug in your USB device. The Wii U will ask you format it. Cancel with No! 1. Launch the Homebrew Launcher and start the MochaFAT32 app. 1. In the configuration menu, set the following settings: - - Config view mode: default - - Skip this menu on launch: on - - Don't relaunch OS: off - - Launch System Menu: on - - RedNAND: off + - Config view mode: default + - Skip this menu on launch: on + - Don't relaunch OS: off + - Launch System Menu: on + - RedNAND: off 1. Your console will load the Wii U menu with your USB device now replacing the SD Card. 1. Launch the Homebrew Launcher and open the disc2app app. 1. Eject any inserted game disc and press the A button to begin the dumping process. diff --git a/translations/pl_PL/docs/extras/dump-wii-games.md b/translations/pl_PL/docs/extras/dump-wii-games.md index db3692a09..1d98d4209 100644 --- a/translations/pl_PL/docs/extras/dump-wii-games.md +++ b/translations/pl_PL/docs/extras/dump-wii-games.md @@ -24,15 +24,15 @@ Dumping your Discs allows you to: play them on a Wii emulator (namely Dolphin), 1. Read the Disclaimer then press A. 1. Select Yes to enable Checksum Calculations. 1. Select either USB or Front SD depending on which device you want to use for the dumping process. - - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. + - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. 1. Press A to continue. 1. Select No on the screen that asks you to download redump.org DAT files. 1. Insert your disc then press A. 1. Go [on this page](https://wiki.dolphin-emu.org/index.php?title=Category:Dual_Layer_Disc_games) to see if your disc is dual-layered. 1. Set everything to match the following: - - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) - - Chunk Size: `Max` - - New device per chunk: `No` + - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) + - Chunk Size: `Max` + - New device per chunk: `No` 1. If you want to dump multiple discs, select Yes to remember your settings. If not, select No. ?> Be prepared to wait a while. The dumping process can take 30 minutes to 1 hour depending on your SD Card's speeds. diff --git a/translations/pl_PL/docs/troubleshooting/fix-errcode-112-1037.md b/translations/pl_PL/docs/troubleshooting/fix-errcode-112-1037.md index 98b8f454c..bce0e7fae 100644 --- a/translations/pl_PL/docs/troubleshooting/fix-errcode-112-1037.md +++ b/translations/pl_PL/docs/troubleshooting/fix-errcode-112-1037.md @@ -25,14 +25,14 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a command prompt window. 1. Use the following command: `cd `. - - Example: cd C:\Users\username\Downloads. + - Example: cd C:\Users\username\Downloads. 1. Use the following command: `py -3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. @@ -45,15 +45,15 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a Terminal window. 1. Use the following command: `cd `. - - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. - - On Linux, the most common place to find your downloaded files is /home/username/Downloads. + - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. + - On Linux, the most common place to find your downloaded files is /home/username/Downloads. 1. Use the following command: `python3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. diff --git a/translations/pl_PL/docs/user-guide/cbhc/browser-exploit.md b/translations/pl_PL/docs/user-guide/cbhc/browser-exploit.md index 6e1553c47..aa6e836d9 100644 --- a/translations/pl_PL/docs/user-guide/cbhc/browser-exploit.md +++ b/translations/pl_PL/docs/user-guide/cbhc/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/pl_PL/docs/user-guide/cbhc/nand-backup.md b/translations/pl_PL/docs/user-guide/cbhc/nand-backup.md index e24bdaf1b..e324b7a81 100644 --- a/translations/pl_PL/docs/user-guide/cbhc/nand-backup.md +++ b/translations/pl_PL/docs/user-guide/cbhc/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/pl_PL/docs/user-guide/haxchi/browser-exploit.md b/translations/pl_PL/docs/user-guide/haxchi/browser-exploit.md index 826e038f3..8853ba483 100644 --- a/translations/pl_PL/docs/user-guide/haxchi/browser-exploit.md +++ b/translations/pl_PL/docs/user-guide/haxchi/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/pl_PL/docs/user-guide/haxchi/nand-backup.md b/translations/pl_PL/docs/user-guide/haxchi/nand-backup.md index 75200207a..9d6d642ad 100644 --- a/translations/pl_PL/docs/user-guide/haxchi/nand-backup.md +++ b/translations/pl_PL/docs/user-guide/haxchi/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/pl_PL/docs/user-guide/mocha/indexiine/browser-exploit.md b/translations/pl_PL/docs/user-guide/mocha/indexiine/browser-exploit.md index 83505773d..c14364eb9 100644 --- a/translations/pl_PL/docs/user-guide/mocha/indexiine/browser-exploit.md +++ b/translations/pl_PL/docs/user-guide/mocha/indexiine/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/pl_PL/docs/user-guide/mocha/indexiine/browser-modding.md b/translations/pl_PL/docs/user-guide/mocha/indexiine/browser-modding.md index 2aa249f4c..2bdfe4a37 100644 --- a/translations/pl_PL/docs/user-guide/mocha/indexiine/browser-modding.md +++ b/translations/pl_PL/docs/user-guide/mocha/indexiine/browser-modding.md @@ -12,7 +12,7 @@ Now that you have your NAND backup in case anything goes wrong later, you can in 1. Turn on your Wii U. 1. Launch the internet browser and open the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. 1. Navigate through the Homebrew Launcher and launch the `Indexiine Installer` app. 1. Press the A button to install Indexiine. 1. When the process completed, close the Homebrew Launcher to get back to your Wii U menu. diff --git a/translations/pl_PL/docs/user-guide/mocha/indexiine/nand-backup.md b/translations/pl_PL/docs/user-guide/mocha/indexiine/nand-backup.md index b0809c71c..88814cff8 100644 --- a/translations/pl_PL/docs/user-guide/mocha/indexiine/nand-backup.md +++ b/translations/pl_PL/docs/user-guide/mocha/indexiine/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/pl_PL/docs/user-guide/mocha/online-exploit/browser-exploit.md b/translations/pl_PL/docs/user-guide/mocha/online-exploit/browser-exploit.md index 8cbf2c754..30b7c94c5 100644 --- a/translations/pl_PL/docs/user-guide/mocha/online-exploit/browser-exploit.md +++ b/translations/pl_PL/docs/user-guide/mocha/online-exploit/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/pl_PL/docs/user-guide/mocha/online-exploit/nand-backup.md b/translations/pl_PL/docs/user-guide/mocha/online-exploit/nand-backup.md index 6513b4f51..adcbfaf3a 100644 --- a/translations/pl_PL/docs/user-guide/mocha/online-exploit/nand-backup.md +++ b/translations/pl_PL/docs/user-guide/mocha/online-exploit/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/pl_PL/docs/vwii/vwii-modding.md b/translations/pl_PL/docs/vwii/vwii-modding.md index c301b7b7f..64bdca1af 100644 --- a/translations/pl_PL/docs/vwii/vwii-modding.md +++ b/translations/pl_PL/docs/vwii/vwii-modding.md @@ -35,11 +35,11 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch the `Wii U NAND Dumper` application. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **optional** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **optional** + - Dump SLC: **optional** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **optional** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slccmpt.bin`, `otp.bin` and if you chose to go with a full backup, `seeprom.bin`, `slc.bin`, and `every mlc.bin.part` file to your computer. @@ -51,10 +51,10 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `A` to backup the Mii Channel and inject the Hackmii Installer then wait until it says Successfully injected wuphax!. - - You will be taken back to the Wii U Menu after a few seconds. + - You will be taken back to the Wii U Menu after a few seconds. 1. Launch vWii (the Wii Menu icon). 1. Launch the vWii Mii Channel. - - If Wuphax has successfully been injected, you will now see the scam warning screen. + - If Wuphax has successfully been injected, you will now see the scam warning screen. 1. Wait until you see `Press 1 to continue` and then press the `1` button. 1. Select `continue`, Install The Homebrew Channel and `Yes, continue`. 1. If The Homebrew Channel has successfully been installed, select `continue` and then `exit`. @@ -62,8 +62,8 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `B` to restore the Mii Channel then wait until it says Mii Channel restored!. - - You will be taken back to the Wii U Menu after a few seconds. - - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). + - You will be taken back to the Wii U Menu after a few seconds. + - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). ### Installing cIOSes @@ -75,19 +75,19 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch The Homebrew Channel. 1. Launch d2x cIOS Installer. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `56` - - Select cIOS slot: `249` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `56` + - Select cIOS slot: `249` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `57` - - Select cIOS slot: `250` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `57` + - Select cIOS slot: `250` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `58` - - Select cIOS slot: `251` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `58` + - Select cIOS slot: `251` 1. Press the `A` button to install. 1. Press the `B` button to exit. diff --git a/translations/pt_BR/docs/extras/block-updates.md b/translations/pt_BR/docs/extras/block-updates.md index 138f56793..6d1a63a79 100644 --- a/translations/pt_BR/docs/extras/block-updates.md +++ b/translations/pt_BR/docs/extras/block-updates.md @@ -30,8 +30,8 @@ Currently, two ways exist to block updates on the Wii U system: 1. Plug the SD Card into your Wii U console and power it on. 1. Enter the Wii U's system settings and navigate to `Internet > Connect to the Internet > Connection List >` `Your WiFi connection > Change Settings > DNS` and set the option to `Do not auto-obtain`. 1. You will be asked to input a primary and secondary DNS. Enter the following IP addresses: - - Primary DNS: 168.235.092.108 - - Secondary DNS: 081.004.127.020 DNS Block + - Primary DNS: 168.235.092.108 + - Secondary DNS: 081.004.127.020 DNS Block 1. Click on confirm. 1. You are now blocking updates. In order to access the eShop, run the NNUPatcher app from the Homebrew Launcher before launching the eShop. diff --git a/translations/pt_BR/docs/extras/configurable-payload.md b/translations/pt_BR/docs/extras/configurable-payload.md index 68e33baea..3068e9e1c 100644 --- a/translations/pt_BR/docs/extras/configurable-payload.md +++ b/translations/pt_BR/docs/extras/configurable-payload.md @@ -19,4 +19,4 @@ This payload is configurable, similar to Haxchi's configuration. This could be v 1. Extract the `Configurable_Payload.zip` file to the root of your SD Card. If it prompts you to overwrite the files on your SD Card, do so. 1. Place the SD Card into your Wii U and launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. If everything has been done correctly, you should be taken back to the Wii U Menu. Mocha has now been enabled and you can use the Homebrew Launcher Channel you installed earlier. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. diff --git a/translations/pt_BR/docs/extras/dump-games.md b/translations/pt_BR/docs/extras/dump-games.md index 63c7044ae..d7b48a17a 100644 --- a/translations/pt_BR/docs/extras/dump-games.md +++ b/translations/pt_BR/docs/extras/dump-games.md @@ -103,11 +103,11 @@ Dumping your Discs allows you to install a copy of your game to the system NAND/ 1. Plug in your USB device. The Wii U will ask you format it. Cancel with No! 1. Launch the Homebrew Launcher and start the MochaFAT32 app. 1. In the configuration menu, set the following settings: - - Config view mode: default - - Skip this menu on launch: on - - Don't relaunch OS: off - - Launch System Menu: on - - RedNAND: off + - Config view mode: default + - Skip this menu on launch: on + - Don't relaunch OS: off + - Launch System Menu: on + - RedNAND: off 1. Your console will load the Wii U menu with your USB device now replacing the SD Card. 1. Launch the Homebrew Launcher and open the disc2app app. 1. Eject any inserted game disc and press the A button to begin the dumping process. diff --git a/translations/pt_BR/docs/extras/dump-wii-games.md b/translations/pt_BR/docs/extras/dump-wii-games.md index db3692a09..1d98d4209 100644 --- a/translations/pt_BR/docs/extras/dump-wii-games.md +++ b/translations/pt_BR/docs/extras/dump-wii-games.md @@ -24,15 +24,15 @@ Dumping your Discs allows you to: play them on a Wii emulator (namely Dolphin), 1. Read the Disclaimer then press A. 1. Select Yes to enable Checksum Calculations. 1. Select either USB or Front SD depending on which device you want to use for the dumping process. - - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. + - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. 1. Press A to continue. 1. Select No on the screen that asks you to download redump.org DAT files. 1. Insert your disc then press A. 1. Go [on this page](https://wiki.dolphin-emu.org/index.php?title=Category:Dual_Layer_Disc_games) to see if your disc is dual-layered. 1. Set everything to match the following: - - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) - - Chunk Size: `Max` - - New device per chunk: `No` + - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) + - Chunk Size: `Max` + - New device per chunk: `No` 1. If you want to dump multiple discs, select Yes to remember your settings. If not, select No. ?> Be prepared to wait a while. The dumping process can take 30 minutes to 1 hour depending on your SD Card's speeds. diff --git a/translations/pt_BR/docs/troubleshooting/fix-errcode-112-1037.md b/translations/pt_BR/docs/troubleshooting/fix-errcode-112-1037.md index 98b8f454c..bce0e7fae 100644 --- a/translations/pt_BR/docs/troubleshooting/fix-errcode-112-1037.md +++ b/translations/pt_BR/docs/troubleshooting/fix-errcode-112-1037.md @@ -25,14 +25,14 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a command prompt window. 1. Use the following command: `cd `. - - Example: cd C:\Users\username\Downloads. + - Example: cd C:\Users\username\Downloads. 1. Use the following command: `py -3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. @@ -45,15 +45,15 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a Terminal window. 1. Use the following command: `cd `. - - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. - - On Linux, the most common place to find your downloaded files is /home/username/Downloads. + - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. + - On Linux, the most common place to find your downloaded files is /home/username/Downloads. 1. Use the following command: `python3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. diff --git a/translations/pt_BR/docs/user-guide/cbhc/browser-exploit.md b/translations/pt_BR/docs/user-guide/cbhc/browser-exploit.md index 6e1553c47..aa6e836d9 100644 --- a/translations/pt_BR/docs/user-guide/cbhc/browser-exploit.md +++ b/translations/pt_BR/docs/user-guide/cbhc/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/pt_BR/docs/user-guide/cbhc/nand-backup.md b/translations/pt_BR/docs/user-guide/cbhc/nand-backup.md index e24bdaf1b..e324b7a81 100644 --- a/translations/pt_BR/docs/user-guide/cbhc/nand-backup.md +++ b/translations/pt_BR/docs/user-guide/cbhc/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/pt_BR/docs/user-guide/haxchi/browser-exploit.md b/translations/pt_BR/docs/user-guide/haxchi/browser-exploit.md index 826e038f3..8853ba483 100644 --- a/translations/pt_BR/docs/user-guide/haxchi/browser-exploit.md +++ b/translations/pt_BR/docs/user-guide/haxchi/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/pt_BR/docs/user-guide/haxchi/nand-backup.md b/translations/pt_BR/docs/user-guide/haxchi/nand-backup.md index 75200207a..9d6d642ad 100644 --- a/translations/pt_BR/docs/user-guide/haxchi/nand-backup.md +++ b/translations/pt_BR/docs/user-guide/haxchi/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/pt_BR/docs/user-guide/mocha/indexiine/browser-exploit.md b/translations/pt_BR/docs/user-guide/mocha/indexiine/browser-exploit.md index 83505773d..c14364eb9 100644 --- a/translations/pt_BR/docs/user-guide/mocha/indexiine/browser-exploit.md +++ b/translations/pt_BR/docs/user-guide/mocha/indexiine/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/pt_BR/docs/user-guide/mocha/indexiine/browser-modding.md b/translations/pt_BR/docs/user-guide/mocha/indexiine/browser-modding.md index 2aa249f4c..2bdfe4a37 100644 --- a/translations/pt_BR/docs/user-guide/mocha/indexiine/browser-modding.md +++ b/translations/pt_BR/docs/user-guide/mocha/indexiine/browser-modding.md @@ -12,7 +12,7 @@ Now that you have your NAND backup in case anything goes wrong later, you can in 1. Turn on your Wii U. 1. Launch the internet browser and open the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. 1. Navigate through the Homebrew Launcher and launch the `Indexiine Installer` app. 1. Press the A button to install Indexiine. 1. When the process completed, close the Homebrew Launcher to get back to your Wii U menu. diff --git a/translations/pt_BR/docs/user-guide/mocha/indexiine/nand-backup.md b/translations/pt_BR/docs/user-guide/mocha/indexiine/nand-backup.md index b0809c71c..88814cff8 100644 --- a/translations/pt_BR/docs/user-guide/mocha/indexiine/nand-backup.md +++ b/translations/pt_BR/docs/user-guide/mocha/indexiine/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/pt_BR/docs/user-guide/mocha/online-exploit/browser-exploit.md b/translations/pt_BR/docs/user-guide/mocha/online-exploit/browser-exploit.md index 8cbf2c754..30b7c94c5 100644 --- a/translations/pt_BR/docs/user-guide/mocha/online-exploit/browser-exploit.md +++ b/translations/pt_BR/docs/user-guide/mocha/online-exploit/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/pt_BR/docs/user-guide/mocha/online-exploit/nand-backup.md b/translations/pt_BR/docs/user-guide/mocha/online-exploit/nand-backup.md index 6513b4f51..adcbfaf3a 100644 --- a/translations/pt_BR/docs/user-guide/mocha/online-exploit/nand-backup.md +++ b/translations/pt_BR/docs/user-guide/mocha/online-exploit/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/pt_BR/docs/vwii/vwii-modding.md b/translations/pt_BR/docs/vwii/vwii-modding.md index c301b7b7f..64bdca1af 100644 --- a/translations/pt_BR/docs/vwii/vwii-modding.md +++ b/translations/pt_BR/docs/vwii/vwii-modding.md @@ -35,11 +35,11 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch the `Wii U NAND Dumper` application. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **optional** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **optional** + - Dump SLC: **optional** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **optional** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slccmpt.bin`, `otp.bin` and if you chose to go with a full backup, `seeprom.bin`, `slc.bin`, and `every mlc.bin.part` file to your computer. @@ -51,10 +51,10 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `A` to backup the Mii Channel and inject the Hackmii Installer then wait until it says Successfully injected wuphax!. - - You will be taken back to the Wii U Menu after a few seconds. + - You will be taken back to the Wii U Menu after a few seconds. 1. Launch vWii (the Wii Menu icon). 1. Launch the vWii Mii Channel. - - If Wuphax has successfully been injected, you will now see the scam warning screen. + - If Wuphax has successfully been injected, you will now see the scam warning screen. 1. Wait until you see `Press 1 to continue` and then press the `1` button. 1. Select `continue`, Install The Homebrew Channel and `Yes, continue`. 1. If The Homebrew Channel has successfully been installed, select `continue` and then `exit`. @@ -62,8 +62,8 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `B` to restore the Mii Channel then wait until it says Mii Channel restored!. - - You will be taken back to the Wii U Menu after a few seconds. - - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). + - You will be taken back to the Wii U Menu after a few seconds. + - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). ### Installing cIOSes @@ -75,19 +75,19 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch The Homebrew Channel. 1. Launch d2x cIOS Installer. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `56` - - Select cIOS slot: `249` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `56` + - Select cIOS slot: `249` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `57` - - Select cIOS slot: `250` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `57` + - Select cIOS slot: `250` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `58` - - Select cIOS slot: `251` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `58` + - Select cIOS slot: `251` 1. Press the `A` button to install. 1. Press the `B` button to exit. diff --git a/translations/pt_PT/docs/extras/block-updates.md b/translations/pt_PT/docs/extras/block-updates.md index 138f56793..6d1a63a79 100644 --- a/translations/pt_PT/docs/extras/block-updates.md +++ b/translations/pt_PT/docs/extras/block-updates.md @@ -30,8 +30,8 @@ Currently, two ways exist to block updates on the Wii U system: 1. Plug the SD Card into your Wii U console and power it on. 1. Enter the Wii U's system settings and navigate to `Internet > Connect to the Internet > Connection List >` `Your WiFi connection > Change Settings > DNS` and set the option to `Do not auto-obtain`. 1. You will be asked to input a primary and secondary DNS. Enter the following IP addresses: - - Primary DNS: 168.235.092.108 - - Secondary DNS: 081.004.127.020 DNS Block + - Primary DNS: 168.235.092.108 + - Secondary DNS: 081.004.127.020 DNS Block 1. Click on confirm. 1. You are now blocking updates. In order to access the eShop, run the NNUPatcher app from the Homebrew Launcher before launching the eShop. diff --git a/translations/pt_PT/docs/extras/configurable-payload.md b/translations/pt_PT/docs/extras/configurable-payload.md index 68e33baea..3068e9e1c 100644 --- a/translations/pt_PT/docs/extras/configurable-payload.md +++ b/translations/pt_PT/docs/extras/configurable-payload.md @@ -19,4 +19,4 @@ This payload is configurable, similar to Haxchi's configuration. This could be v 1. Extract the `Configurable_Payload.zip` file to the root of your SD Card. If it prompts you to overwrite the files on your SD Card, do so. 1. Place the SD Card into your Wii U and launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. If everything has been done correctly, you should be taken back to the Wii U Menu. Mocha has now been enabled and you can use the Homebrew Launcher Channel you installed earlier. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. diff --git a/translations/pt_PT/docs/extras/dump-games.md b/translations/pt_PT/docs/extras/dump-games.md index 63c7044ae..d7b48a17a 100644 --- a/translations/pt_PT/docs/extras/dump-games.md +++ b/translations/pt_PT/docs/extras/dump-games.md @@ -103,11 +103,11 @@ Dumping your Discs allows you to install a copy of your game to the system NAND/ 1. Plug in your USB device. The Wii U will ask you format it. Cancel with No! 1. Launch the Homebrew Launcher and start the MochaFAT32 app. 1. In the configuration menu, set the following settings: - - Config view mode: default - - Skip this menu on launch: on - - Don't relaunch OS: off - - Launch System Menu: on - - RedNAND: off + - Config view mode: default + - Skip this menu on launch: on + - Don't relaunch OS: off + - Launch System Menu: on + - RedNAND: off 1. Your console will load the Wii U menu with your USB device now replacing the SD Card. 1. Launch the Homebrew Launcher and open the disc2app app. 1. Eject any inserted game disc and press the A button to begin the dumping process. diff --git a/translations/pt_PT/docs/extras/dump-wii-games.md b/translations/pt_PT/docs/extras/dump-wii-games.md index db3692a09..1d98d4209 100644 --- a/translations/pt_PT/docs/extras/dump-wii-games.md +++ b/translations/pt_PT/docs/extras/dump-wii-games.md @@ -24,15 +24,15 @@ Dumping your Discs allows you to: play them on a Wii emulator (namely Dolphin), 1. Read the Disclaimer then press A. 1. Select Yes to enable Checksum Calculations. 1. Select either USB or Front SD depending on which device you want to use for the dumping process. - - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. + - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. 1. Press A to continue. 1. Select No on the screen that asks you to download redump.org DAT files. 1. Insert your disc then press A. 1. Go [on this page](https://wiki.dolphin-emu.org/index.php?title=Category:Dual_Layer_Disc_games) to see if your disc is dual-layered. 1. Set everything to match the following: - - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) - - Chunk Size: `Max` - - New device per chunk: `No` + - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) + - Chunk Size: `Max` + - New device per chunk: `No` 1. If you want to dump multiple discs, select Yes to remember your settings. If not, select No. ?> Be prepared to wait a while. The dumping process can take 30 minutes to 1 hour depending on your SD Card's speeds. diff --git a/translations/pt_PT/docs/troubleshooting/fix-errcode-112-1037.md b/translations/pt_PT/docs/troubleshooting/fix-errcode-112-1037.md index 98b8f454c..bce0e7fae 100644 --- a/translations/pt_PT/docs/troubleshooting/fix-errcode-112-1037.md +++ b/translations/pt_PT/docs/troubleshooting/fix-errcode-112-1037.md @@ -25,14 +25,14 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a command prompt window. 1. Use the following command: `cd `. - - Example: cd C:\Users\username\Downloads. + - Example: cd C:\Users\username\Downloads. 1. Use the following command: `py -3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. @@ -45,15 +45,15 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a Terminal window. 1. Use the following command: `cd `. - - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. - - On Linux, the most common place to find your downloaded files is /home/username/Downloads. + - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. + - On Linux, the most common place to find your downloaded files is /home/username/Downloads. 1. Use the following command: `python3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. diff --git a/translations/pt_PT/docs/user-guide/cbhc/browser-exploit.md b/translations/pt_PT/docs/user-guide/cbhc/browser-exploit.md index 6e1553c47..aa6e836d9 100644 --- a/translations/pt_PT/docs/user-guide/cbhc/browser-exploit.md +++ b/translations/pt_PT/docs/user-guide/cbhc/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/pt_PT/docs/user-guide/cbhc/nand-backup.md b/translations/pt_PT/docs/user-guide/cbhc/nand-backup.md index e24bdaf1b..e324b7a81 100644 --- a/translations/pt_PT/docs/user-guide/cbhc/nand-backup.md +++ b/translations/pt_PT/docs/user-guide/cbhc/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/pt_PT/docs/user-guide/haxchi/browser-exploit.md b/translations/pt_PT/docs/user-guide/haxchi/browser-exploit.md index 826e038f3..8853ba483 100644 --- a/translations/pt_PT/docs/user-guide/haxchi/browser-exploit.md +++ b/translations/pt_PT/docs/user-guide/haxchi/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/pt_PT/docs/user-guide/haxchi/nand-backup.md b/translations/pt_PT/docs/user-guide/haxchi/nand-backup.md index 75200207a..9d6d642ad 100644 --- a/translations/pt_PT/docs/user-guide/haxchi/nand-backup.md +++ b/translations/pt_PT/docs/user-guide/haxchi/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/pt_PT/docs/user-guide/mocha/indexiine/browser-exploit.md b/translations/pt_PT/docs/user-guide/mocha/indexiine/browser-exploit.md index 83505773d..c14364eb9 100644 --- a/translations/pt_PT/docs/user-guide/mocha/indexiine/browser-exploit.md +++ b/translations/pt_PT/docs/user-guide/mocha/indexiine/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/pt_PT/docs/user-guide/mocha/indexiine/browser-modding.md b/translations/pt_PT/docs/user-guide/mocha/indexiine/browser-modding.md index 2aa249f4c..2bdfe4a37 100644 --- a/translations/pt_PT/docs/user-guide/mocha/indexiine/browser-modding.md +++ b/translations/pt_PT/docs/user-guide/mocha/indexiine/browser-modding.md @@ -12,7 +12,7 @@ Now that you have your NAND backup in case anything goes wrong later, you can in 1. Turn on your Wii U. 1. Launch the internet browser and open the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. 1. Navigate through the Homebrew Launcher and launch the `Indexiine Installer` app. 1. Press the A button to install Indexiine. 1. When the process completed, close the Homebrew Launcher to get back to your Wii U menu. diff --git a/translations/pt_PT/docs/user-guide/mocha/indexiine/nand-backup.md b/translations/pt_PT/docs/user-guide/mocha/indexiine/nand-backup.md index b0809c71c..88814cff8 100644 --- a/translations/pt_PT/docs/user-guide/mocha/indexiine/nand-backup.md +++ b/translations/pt_PT/docs/user-guide/mocha/indexiine/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/pt_PT/docs/user-guide/mocha/online-exploit/browser-exploit.md b/translations/pt_PT/docs/user-guide/mocha/online-exploit/browser-exploit.md index 8cbf2c754..30b7c94c5 100644 --- a/translations/pt_PT/docs/user-guide/mocha/online-exploit/browser-exploit.md +++ b/translations/pt_PT/docs/user-guide/mocha/online-exploit/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/pt_PT/docs/user-guide/mocha/online-exploit/nand-backup.md b/translations/pt_PT/docs/user-guide/mocha/online-exploit/nand-backup.md index 6513b4f51..adcbfaf3a 100644 --- a/translations/pt_PT/docs/user-guide/mocha/online-exploit/nand-backup.md +++ b/translations/pt_PT/docs/user-guide/mocha/online-exploit/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/pt_PT/docs/vwii/vwii-modding.md b/translations/pt_PT/docs/vwii/vwii-modding.md index c301b7b7f..64bdca1af 100644 --- a/translations/pt_PT/docs/vwii/vwii-modding.md +++ b/translations/pt_PT/docs/vwii/vwii-modding.md @@ -35,11 +35,11 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch the `Wii U NAND Dumper` application. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **optional** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **optional** + - Dump SLC: **optional** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **optional** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slccmpt.bin`, `otp.bin` and if you chose to go with a full backup, `seeprom.bin`, `slc.bin`, and `every mlc.bin.part` file to your computer. @@ -51,10 +51,10 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `A` to backup the Mii Channel and inject the Hackmii Installer then wait until it says Successfully injected wuphax!. - - You will be taken back to the Wii U Menu after a few seconds. + - You will be taken back to the Wii U Menu after a few seconds. 1. Launch vWii (the Wii Menu icon). 1. Launch the vWii Mii Channel. - - If Wuphax has successfully been injected, you will now see the scam warning screen. + - If Wuphax has successfully been injected, you will now see the scam warning screen. 1. Wait until you see `Press 1 to continue` and then press the `1` button. 1. Select `continue`, Install The Homebrew Channel and `Yes, continue`. 1. If The Homebrew Channel has successfully been installed, select `continue` and then `exit`. @@ -62,8 +62,8 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `B` to restore the Mii Channel then wait until it says Mii Channel restored!. - - You will be taken back to the Wii U Menu after a few seconds. - - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). + - You will be taken back to the Wii U Menu after a few seconds. + - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). ### Installing cIOSes @@ -75,19 +75,19 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch The Homebrew Channel. 1. Launch d2x cIOS Installer. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `56` - - Select cIOS slot: `249` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `56` + - Select cIOS slot: `249` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `57` - - Select cIOS slot: `250` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `57` + - Select cIOS slot: `250` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `58` - - Select cIOS slot: `251` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `58` + - Select cIOS slot: `251` 1. Press the `A` button to install. 1. Press the `B` button to exit. diff --git a/translations/ro_RO/docs/extras/block-updates.md b/translations/ro_RO/docs/extras/block-updates.md index 138f56793..6d1a63a79 100644 --- a/translations/ro_RO/docs/extras/block-updates.md +++ b/translations/ro_RO/docs/extras/block-updates.md @@ -30,8 +30,8 @@ Currently, two ways exist to block updates on the Wii U system: 1. Plug the SD Card into your Wii U console and power it on. 1. Enter the Wii U's system settings and navigate to `Internet > Connect to the Internet > Connection List >` `Your WiFi connection > Change Settings > DNS` and set the option to `Do not auto-obtain`. 1. You will be asked to input a primary and secondary DNS. Enter the following IP addresses: - - Primary DNS: 168.235.092.108 - - Secondary DNS: 081.004.127.020 DNS Block + - Primary DNS: 168.235.092.108 + - Secondary DNS: 081.004.127.020 DNS Block 1. Click on confirm. 1. You are now blocking updates. In order to access the eShop, run the NNUPatcher app from the Homebrew Launcher before launching the eShop. diff --git a/translations/ro_RO/docs/extras/configurable-payload.md b/translations/ro_RO/docs/extras/configurable-payload.md index 68e33baea..3068e9e1c 100644 --- a/translations/ro_RO/docs/extras/configurable-payload.md +++ b/translations/ro_RO/docs/extras/configurable-payload.md @@ -19,4 +19,4 @@ This payload is configurable, similar to Haxchi's configuration. This could be v 1. Extract the `Configurable_Payload.zip` file to the root of your SD Card. If it prompts you to overwrite the files on your SD Card, do so. 1. Place the SD Card into your Wii U and launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. If everything has been done correctly, you should be taken back to the Wii U Menu. Mocha has now been enabled and you can use the Homebrew Launcher Channel you installed earlier. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. diff --git a/translations/ro_RO/docs/extras/dump-games.md b/translations/ro_RO/docs/extras/dump-games.md index 63c7044ae..d7b48a17a 100644 --- a/translations/ro_RO/docs/extras/dump-games.md +++ b/translations/ro_RO/docs/extras/dump-games.md @@ -103,11 +103,11 @@ Dumping your Discs allows you to install a copy of your game to the system NAND/ 1. Plug in your USB device. The Wii U will ask you format it. Cancel with No! 1. Launch the Homebrew Launcher and start the MochaFAT32 app. 1. In the configuration menu, set the following settings: - - Config view mode: default - - Skip this menu on launch: on - - Don't relaunch OS: off - - Launch System Menu: on - - RedNAND: off + - Config view mode: default + - Skip this menu on launch: on + - Don't relaunch OS: off + - Launch System Menu: on + - RedNAND: off 1. Your console will load the Wii U menu with your USB device now replacing the SD Card. 1. Launch the Homebrew Launcher and open the disc2app app. 1. Eject any inserted game disc and press the A button to begin the dumping process. diff --git a/translations/ro_RO/docs/extras/dump-wii-games.md b/translations/ro_RO/docs/extras/dump-wii-games.md index db3692a09..1d98d4209 100644 --- a/translations/ro_RO/docs/extras/dump-wii-games.md +++ b/translations/ro_RO/docs/extras/dump-wii-games.md @@ -24,15 +24,15 @@ Dumping your Discs allows you to: play them on a Wii emulator (namely Dolphin), 1. Read the Disclaimer then press A. 1. Select Yes to enable Checksum Calculations. 1. Select either USB or Front SD depending on which device you want to use for the dumping process. - - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. + - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. 1. Press A to continue. 1. Select No on the screen that asks you to download redump.org DAT files. 1. Insert your disc then press A. 1. Go [on this page](https://wiki.dolphin-emu.org/index.php?title=Category:Dual_Layer_Disc_games) to see if your disc is dual-layered. 1. Set everything to match the following: - - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) - - Chunk Size: `Max` - - New device per chunk: `No` + - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) + - Chunk Size: `Max` + - New device per chunk: `No` 1. If you want to dump multiple discs, select Yes to remember your settings. If not, select No. ?> Be prepared to wait a while. The dumping process can take 30 minutes to 1 hour depending on your SD Card's speeds. diff --git a/translations/ro_RO/docs/troubleshooting/fix-errcode-112-1037.md b/translations/ro_RO/docs/troubleshooting/fix-errcode-112-1037.md index 98b8f454c..bce0e7fae 100644 --- a/translations/ro_RO/docs/troubleshooting/fix-errcode-112-1037.md +++ b/translations/ro_RO/docs/troubleshooting/fix-errcode-112-1037.md @@ -25,14 +25,14 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a command prompt window. 1. Use the following command: `cd `. - - Example: cd C:\Users\username\Downloads. + - Example: cd C:\Users\username\Downloads. 1. Use the following command: `py -3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. @@ -45,15 +45,15 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a Terminal window. 1. Use the following command: `cd `. - - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. - - On Linux, the most common place to find your downloaded files is /home/username/Downloads. + - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. + - On Linux, the most common place to find your downloaded files is /home/username/Downloads. 1. Use the following command: `python3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. diff --git a/translations/ro_RO/docs/user-guide/cbhc/browser-exploit.md b/translations/ro_RO/docs/user-guide/cbhc/browser-exploit.md index 6e1553c47..aa6e836d9 100644 --- a/translations/ro_RO/docs/user-guide/cbhc/browser-exploit.md +++ b/translations/ro_RO/docs/user-guide/cbhc/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/ro_RO/docs/user-guide/cbhc/nand-backup.md b/translations/ro_RO/docs/user-guide/cbhc/nand-backup.md index e24bdaf1b..e324b7a81 100644 --- a/translations/ro_RO/docs/user-guide/cbhc/nand-backup.md +++ b/translations/ro_RO/docs/user-guide/cbhc/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/ro_RO/docs/user-guide/haxchi/browser-exploit.md b/translations/ro_RO/docs/user-guide/haxchi/browser-exploit.md index 826e038f3..8853ba483 100644 --- a/translations/ro_RO/docs/user-guide/haxchi/browser-exploit.md +++ b/translations/ro_RO/docs/user-guide/haxchi/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/ro_RO/docs/user-guide/haxchi/nand-backup.md b/translations/ro_RO/docs/user-guide/haxchi/nand-backup.md index 75200207a..9d6d642ad 100644 --- a/translations/ro_RO/docs/user-guide/haxchi/nand-backup.md +++ b/translations/ro_RO/docs/user-guide/haxchi/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/ro_RO/docs/user-guide/mocha/indexiine/browser-exploit.md b/translations/ro_RO/docs/user-guide/mocha/indexiine/browser-exploit.md index 83505773d..c14364eb9 100644 --- a/translations/ro_RO/docs/user-guide/mocha/indexiine/browser-exploit.md +++ b/translations/ro_RO/docs/user-guide/mocha/indexiine/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/ro_RO/docs/user-guide/mocha/indexiine/browser-modding.md b/translations/ro_RO/docs/user-guide/mocha/indexiine/browser-modding.md index 2aa249f4c..2bdfe4a37 100644 --- a/translations/ro_RO/docs/user-guide/mocha/indexiine/browser-modding.md +++ b/translations/ro_RO/docs/user-guide/mocha/indexiine/browser-modding.md @@ -12,7 +12,7 @@ Now that you have your NAND backup in case anything goes wrong later, you can in 1. Turn on your Wii U. 1. Launch the internet browser and open the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. 1. Navigate through the Homebrew Launcher and launch the `Indexiine Installer` app. 1. Press the A button to install Indexiine. 1. When the process completed, close the Homebrew Launcher to get back to your Wii U menu. diff --git a/translations/ro_RO/docs/user-guide/mocha/indexiine/nand-backup.md b/translations/ro_RO/docs/user-guide/mocha/indexiine/nand-backup.md index b0809c71c..88814cff8 100644 --- a/translations/ro_RO/docs/user-guide/mocha/indexiine/nand-backup.md +++ b/translations/ro_RO/docs/user-guide/mocha/indexiine/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/ro_RO/docs/user-guide/mocha/online-exploit/browser-exploit.md b/translations/ro_RO/docs/user-guide/mocha/online-exploit/browser-exploit.md index 8cbf2c754..30b7c94c5 100644 --- a/translations/ro_RO/docs/user-guide/mocha/online-exploit/browser-exploit.md +++ b/translations/ro_RO/docs/user-guide/mocha/online-exploit/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/ro_RO/docs/user-guide/mocha/online-exploit/nand-backup.md b/translations/ro_RO/docs/user-guide/mocha/online-exploit/nand-backup.md index 6513b4f51..adcbfaf3a 100644 --- a/translations/ro_RO/docs/user-guide/mocha/online-exploit/nand-backup.md +++ b/translations/ro_RO/docs/user-guide/mocha/online-exploit/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/ro_RO/docs/vwii/vwii-modding.md b/translations/ro_RO/docs/vwii/vwii-modding.md index c301b7b7f..64bdca1af 100644 --- a/translations/ro_RO/docs/vwii/vwii-modding.md +++ b/translations/ro_RO/docs/vwii/vwii-modding.md @@ -35,11 +35,11 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch the `Wii U NAND Dumper` application. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **optional** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **optional** + - Dump SLC: **optional** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **optional** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slccmpt.bin`, `otp.bin` and if you chose to go with a full backup, `seeprom.bin`, `slc.bin`, and `every mlc.bin.part` file to your computer. @@ -51,10 +51,10 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `A` to backup the Mii Channel and inject the Hackmii Installer then wait until it says Successfully injected wuphax!. - - You will be taken back to the Wii U Menu after a few seconds. + - You will be taken back to the Wii U Menu after a few seconds. 1. Launch vWii (the Wii Menu icon). 1. Launch the vWii Mii Channel. - - If Wuphax has successfully been injected, you will now see the scam warning screen. + - If Wuphax has successfully been injected, you will now see the scam warning screen. 1. Wait until you see `Press 1 to continue` and then press the `1` button. 1. Select `continue`, Install The Homebrew Channel and `Yes, continue`. 1. If The Homebrew Channel has successfully been installed, select `continue` and then `exit`. @@ -62,8 +62,8 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `B` to restore the Mii Channel then wait until it says Mii Channel restored!. - - You will be taken back to the Wii U Menu after a few seconds. - - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). + - You will be taken back to the Wii U Menu after a few seconds. + - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). ### Installing cIOSes @@ -75,19 +75,19 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch The Homebrew Channel. 1. Launch d2x cIOS Installer. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `56` - - Select cIOS slot: `249` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `56` + - Select cIOS slot: `249` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `57` - - Select cIOS slot: `250` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `57` + - Select cIOS slot: `250` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `58` - - Select cIOS slot: `251` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `58` + - Select cIOS slot: `251` 1. Press the `A` button to install. 1. Press the `B` button to exit. diff --git a/translations/ru_RU/docs/extras/block-updates.md b/translations/ru_RU/docs/extras/block-updates.md index 138f56793..6d1a63a79 100644 --- a/translations/ru_RU/docs/extras/block-updates.md +++ b/translations/ru_RU/docs/extras/block-updates.md @@ -30,8 +30,8 @@ Currently, two ways exist to block updates on the Wii U system: 1. Plug the SD Card into your Wii U console and power it on. 1. Enter the Wii U's system settings and navigate to `Internet > Connect to the Internet > Connection List >` `Your WiFi connection > Change Settings > DNS` and set the option to `Do not auto-obtain`. 1. You will be asked to input a primary and secondary DNS. Enter the following IP addresses: - - Primary DNS: 168.235.092.108 - - Secondary DNS: 081.004.127.020 DNS Block + - Primary DNS: 168.235.092.108 + - Secondary DNS: 081.004.127.020 DNS Block 1. Click on confirm. 1. You are now blocking updates. In order to access the eShop, run the NNUPatcher app from the Homebrew Launcher before launching the eShop. diff --git a/translations/ru_RU/docs/extras/configurable-payload.md b/translations/ru_RU/docs/extras/configurable-payload.md index 68e33baea..3068e9e1c 100644 --- a/translations/ru_RU/docs/extras/configurable-payload.md +++ b/translations/ru_RU/docs/extras/configurable-payload.md @@ -19,4 +19,4 @@ This payload is configurable, similar to Haxchi's configuration. This could be v 1. Extract the `Configurable_Payload.zip` file to the root of your SD Card. If it prompts you to overwrite the files on your SD Card, do so. 1. Place the SD Card into your Wii U and launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. If everything has been done correctly, you should be taken back to the Wii U Menu. Mocha has now been enabled and you can use the Homebrew Launcher Channel you installed earlier. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. diff --git a/translations/ru_RU/docs/extras/dump-games.md b/translations/ru_RU/docs/extras/dump-games.md index 63c7044ae..d7b48a17a 100644 --- a/translations/ru_RU/docs/extras/dump-games.md +++ b/translations/ru_RU/docs/extras/dump-games.md @@ -103,11 +103,11 @@ Dumping your Discs allows you to install a copy of your game to the system NAND/ 1. Plug in your USB device. The Wii U will ask you format it. Cancel with No! 1. Launch the Homebrew Launcher and start the MochaFAT32 app. 1. In the configuration menu, set the following settings: - - Config view mode: default - - Skip this menu on launch: on - - Don't relaunch OS: off - - Launch System Menu: on - - RedNAND: off + - Config view mode: default + - Skip this menu on launch: on + - Don't relaunch OS: off + - Launch System Menu: on + - RedNAND: off 1. Your console will load the Wii U menu with your USB device now replacing the SD Card. 1. Launch the Homebrew Launcher and open the disc2app app. 1. Eject any inserted game disc and press the A button to begin the dumping process. diff --git a/translations/ru_RU/docs/extras/dump-wii-games.md b/translations/ru_RU/docs/extras/dump-wii-games.md index db3692a09..1d98d4209 100644 --- a/translations/ru_RU/docs/extras/dump-wii-games.md +++ b/translations/ru_RU/docs/extras/dump-wii-games.md @@ -24,15 +24,15 @@ Dumping your Discs allows you to: play them on a Wii emulator (namely Dolphin), 1. Read the Disclaimer then press A. 1. Select Yes to enable Checksum Calculations. 1. Select either USB or Front SD depending on which device you want to use for the dumping process. - - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. + - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. 1. Press A to continue. 1. Select No on the screen that asks you to download redump.org DAT files. 1. Insert your disc then press A. 1. Go [on this page](https://wiki.dolphin-emu.org/index.php?title=Category:Dual_Layer_Disc_games) to see if your disc is dual-layered. 1. Set everything to match the following: - - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) - - Chunk Size: `Max` - - New device per chunk: `No` + - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) + - Chunk Size: `Max` + - New device per chunk: `No` 1. If you want to dump multiple discs, select Yes to remember your settings. If not, select No. ?> Be prepared to wait a while. The dumping process can take 30 minutes to 1 hour depending on your SD Card's speeds. diff --git a/translations/ru_RU/docs/troubleshooting/fix-errcode-112-1037.md b/translations/ru_RU/docs/troubleshooting/fix-errcode-112-1037.md index 98b8f454c..bce0e7fae 100644 --- a/translations/ru_RU/docs/troubleshooting/fix-errcode-112-1037.md +++ b/translations/ru_RU/docs/troubleshooting/fix-errcode-112-1037.md @@ -25,14 +25,14 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a command prompt window. 1. Use the following command: `cd `. - - Example: cd C:\Users\username\Downloads. + - Example: cd C:\Users\username\Downloads. 1. Use the following command: `py -3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. @@ -45,15 +45,15 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a Terminal window. 1. Use the following command: `cd `. - - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. - - On Linux, the most common place to find your downloaded files is /home/username/Downloads. + - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. + - On Linux, the most common place to find your downloaded files is /home/username/Downloads. 1. Use the following command: `python3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. diff --git a/translations/ru_RU/docs/user-guide/cbhc/browser-exploit.md b/translations/ru_RU/docs/user-guide/cbhc/browser-exploit.md index 6e1553c47..aa6e836d9 100644 --- a/translations/ru_RU/docs/user-guide/cbhc/browser-exploit.md +++ b/translations/ru_RU/docs/user-guide/cbhc/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/ru_RU/docs/user-guide/cbhc/nand-backup.md b/translations/ru_RU/docs/user-guide/cbhc/nand-backup.md index e24bdaf1b..e324b7a81 100644 --- a/translations/ru_RU/docs/user-guide/cbhc/nand-backup.md +++ b/translations/ru_RU/docs/user-guide/cbhc/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/ru_RU/docs/user-guide/haxchi/browser-exploit.md b/translations/ru_RU/docs/user-guide/haxchi/browser-exploit.md index 826e038f3..8853ba483 100644 --- a/translations/ru_RU/docs/user-guide/haxchi/browser-exploit.md +++ b/translations/ru_RU/docs/user-guide/haxchi/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/ru_RU/docs/user-guide/haxchi/nand-backup.md b/translations/ru_RU/docs/user-guide/haxchi/nand-backup.md index 75200207a..9d6d642ad 100644 --- a/translations/ru_RU/docs/user-guide/haxchi/nand-backup.md +++ b/translations/ru_RU/docs/user-guide/haxchi/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/ru_RU/docs/user-guide/mocha/indexiine/browser-exploit.md b/translations/ru_RU/docs/user-guide/mocha/indexiine/browser-exploit.md index 83505773d..c14364eb9 100644 --- a/translations/ru_RU/docs/user-guide/mocha/indexiine/browser-exploit.md +++ b/translations/ru_RU/docs/user-guide/mocha/indexiine/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/ru_RU/docs/user-guide/mocha/indexiine/browser-modding.md b/translations/ru_RU/docs/user-guide/mocha/indexiine/browser-modding.md index 2aa249f4c..2bdfe4a37 100644 --- a/translations/ru_RU/docs/user-guide/mocha/indexiine/browser-modding.md +++ b/translations/ru_RU/docs/user-guide/mocha/indexiine/browser-modding.md @@ -12,7 +12,7 @@ Now that you have your NAND backup in case anything goes wrong later, you can in 1. Turn on your Wii U. 1. Launch the internet browser and open the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. 1. Navigate through the Homebrew Launcher and launch the `Indexiine Installer` app. 1. Press the A button to install Indexiine. 1. When the process completed, close the Homebrew Launcher to get back to your Wii U menu. diff --git a/translations/ru_RU/docs/user-guide/mocha/indexiine/nand-backup.md b/translations/ru_RU/docs/user-guide/mocha/indexiine/nand-backup.md index b0809c71c..88814cff8 100644 --- a/translations/ru_RU/docs/user-guide/mocha/indexiine/nand-backup.md +++ b/translations/ru_RU/docs/user-guide/mocha/indexiine/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/ru_RU/docs/user-guide/mocha/online-exploit/browser-exploit.md b/translations/ru_RU/docs/user-guide/mocha/online-exploit/browser-exploit.md index 8cbf2c754..30b7c94c5 100644 --- a/translations/ru_RU/docs/user-guide/mocha/online-exploit/browser-exploit.md +++ b/translations/ru_RU/docs/user-guide/mocha/online-exploit/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/ru_RU/docs/user-guide/mocha/online-exploit/nand-backup.md b/translations/ru_RU/docs/user-guide/mocha/online-exploit/nand-backup.md index 6513b4f51..adcbfaf3a 100644 --- a/translations/ru_RU/docs/user-guide/mocha/online-exploit/nand-backup.md +++ b/translations/ru_RU/docs/user-guide/mocha/online-exploit/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/ru_RU/docs/vwii/vwii-modding.md b/translations/ru_RU/docs/vwii/vwii-modding.md index c301b7b7f..64bdca1af 100644 --- a/translations/ru_RU/docs/vwii/vwii-modding.md +++ b/translations/ru_RU/docs/vwii/vwii-modding.md @@ -35,11 +35,11 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch the `Wii U NAND Dumper` application. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **optional** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **optional** + - Dump SLC: **optional** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **optional** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slccmpt.bin`, `otp.bin` and if you chose to go with a full backup, `seeprom.bin`, `slc.bin`, and `every mlc.bin.part` file to your computer. @@ -51,10 +51,10 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `A` to backup the Mii Channel and inject the Hackmii Installer then wait until it says Successfully injected wuphax!. - - You will be taken back to the Wii U Menu after a few seconds. + - You will be taken back to the Wii U Menu after a few seconds. 1. Launch vWii (the Wii Menu icon). 1. Launch the vWii Mii Channel. - - If Wuphax has successfully been injected, you will now see the scam warning screen. + - If Wuphax has successfully been injected, you will now see the scam warning screen. 1. Wait until you see `Press 1 to continue` and then press the `1` button. 1. Select `continue`, Install The Homebrew Channel and `Yes, continue`. 1. If The Homebrew Channel has successfully been installed, select `continue` and then `exit`. @@ -62,8 +62,8 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `B` to restore the Mii Channel then wait until it says Mii Channel restored!. - - You will be taken back to the Wii U Menu after a few seconds. - - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). + - You will be taken back to the Wii U Menu after a few seconds. + - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). ### Installing cIOSes @@ -75,19 +75,19 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch The Homebrew Channel. 1. Launch d2x cIOS Installer. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `56` - - Select cIOS slot: `249` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `56` + - Select cIOS slot: `249` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `57` - - Select cIOS slot: `250` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `57` + - Select cIOS slot: `250` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `58` - - Select cIOS slot: `251` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `58` + - Select cIOS slot: `251` 1. Press the `A` button to install. 1. Press the `B` button to exit. diff --git a/translations/sv_SE/docs/extras/block-updates.md b/translations/sv_SE/docs/extras/block-updates.md index 138f56793..6d1a63a79 100644 --- a/translations/sv_SE/docs/extras/block-updates.md +++ b/translations/sv_SE/docs/extras/block-updates.md @@ -30,8 +30,8 @@ Currently, two ways exist to block updates on the Wii U system: 1. Plug the SD Card into your Wii U console and power it on. 1. Enter the Wii U's system settings and navigate to `Internet > Connect to the Internet > Connection List >` `Your WiFi connection > Change Settings > DNS` and set the option to `Do not auto-obtain`. 1. You will be asked to input a primary and secondary DNS. Enter the following IP addresses: - - Primary DNS: 168.235.092.108 - - Secondary DNS: 081.004.127.020 DNS Block + - Primary DNS: 168.235.092.108 + - Secondary DNS: 081.004.127.020 DNS Block 1. Click on confirm. 1. You are now blocking updates. In order to access the eShop, run the NNUPatcher app from the Homebrew Launcher before launching the eShop. diff --git a/translations/sv_SE/docs/extras/configurable-payload.md b/translations/sv_SE/docs/extras/configurable-payload.md index 68e33baea..3068e9e1c 100644 --- a/translations/sv_SE/docs/extras/configurable-payload.md +++ b/translations/sv_SE/docs/extras/configurable-payload.md @@ -19,4 +19,4 @@ This payload is configurable, similar to Haxchi's configuration. This could be v 1. Extract the `Configurable_Payload.zip` file to the root of your SD Card. If it prompts you to overwrite the files on your SD Card, do so. 1. Place the SD Card into your Wii U and launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. If everything has been done correctly, you should be taken back to the Wii U Menu. Mocha has now been enabled and you can use the Homebrew Launcher Channel you installed earlier. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. diff --git a/translations/sv_SE/docs/extras/dump-games.md b/translations/sv_SE/docs/extras/dump-games.md index 63c7044ae..d7b48a17a 100644 --- a/translations/sv_SE/docs/extras/dump-games.md +++ b/translations/sv_SE/docs/extras/dump-games.md @@ -103,11 +103,11 @@ Dumping your Discs allows you to install a copy of your game to the system NAND/ 1. Plug in your USB device. The Wii U will ask you format it. Cancel with No! 1. Launch the Homebrew Launcher and start the MochaFAT32 app. 1. In the configuration menu, set the following settings: - - Config view mode: default - - Skip this menu on launch: on - - Don't relaunch OS: off - - Launch System Menu: on - - RedNAND: off + - Config view mode: default + - Skip this menu on launch: on + - Don't relaunch OS: off + - Launch System Menu: on + - RedNAND: off 1. Your console will load the Wii U menu with your USB device now replacing the SD Card. 1. Launch the Homebrew Launcher and open the disc2app app. 1. Eject any inserted game disc and press the A button to begin the dumping process. diff --git a/translations/sv_SE/docs/extras/dump-wii-games.md b/translations/sv_SE/docs/extras/dump-wii-games.md index db3692a09..1d98d4209 100644 --- a/translations/sv_SE/docs/extras/dump-wii-games.md +++ b/translations/sv_SE/docs/extras/dump-wii-games.md @@ -24,15 +24,15 @@ Dumping your Discs allows you to: play them on a Wii emulator (namely Dolphin), 1. Read the Disclaimer then press A. 1. Select Yes to enable Checksum Calculations. 1. Select either USB or Front SD depending on which device you want to use for the dumping process. - - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. + - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. 1. Press A to continue. 1. Select No on the screen that asks you to download redump.org DAT files. 1. Insert your disc then press A. 1. Go [on this page](https://wiki.dolphin-emu.org/index.php?title=Category:Dual_Layer_Disc_games) to see if your disc is dual-layered. 1. Set everything to match the following: - - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) - - Chunk Size: `Max` - - New device per chunk: `No` + - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) + - Chunk Size: `Max` + - New device per chunk: `No` 1. If you want to dump multiple discs, select Yes to remember your settings. If not, select No. ?> Be prepared to wait a while. The dumping process can take 30 minutes to 1 hour depending on your SD Card's speeds. diff --git a/translations/sv_SE/docs/troubleshooting/fix-errcode-112-1037.md b/translations/sv_SE/docs/troubleshooting/fix-errcode-112-1037.md index 98b8f454c..bce0e7fae 100644 --- a/translations/sv_SE/docs/troubleshooting/fix-errcode-112-1037.md +++ b/translations/sv_SE/docs/troubleshooting/fix-errcode-112-1037.md @@ -25,14 +25,14 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a command prompt window. 1. Use the following command: `cd `. - - Example: cd C:\Users\username\Downloads. + - Example: cd C:\Users\username\Downloads. 1. Use the following command: `py -3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. @@ -45,15 +45,15 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a Terminal window. 1. Use the following command: `cd `. - - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. - - On Linux, the most common place to find your downloaded files is /home/username/Downloads. + - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. + - On Linux, the most common place to find your downloaded files is /home/username/Downloads. 1. Use the following command: `python3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. diff --git a/translations/sv_SE/docs/user-guide/cbhc/browser-exploit.md b/translations/sv_SE/docs/user-guide/cbhc/browser-exploit.md index 6e1553c47..aa6e836d9 100644 --- a/translations/sv_SE/docs/user-guide/cbhc/browser-exploit.md +++ b/translations/sv_SE/docs/user-guide/cbhc/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/sv_SE/docs/user-guide/cbhc/nand-backup.md b/translations/sv_SE/docs/user-guide/cbhc/nand-backup.md index e24bdaf1b..e324b7a81 100644 --- a/translations/sv_SE/docs/user-guide/cbhc/nand-backup.md +++ b/translations/sv_SE/docs/user-guide/cbhc/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/sv_SE/docs/user-guide/haxchi/browser-exploit.md b/translations/sv_SE/docs/user-guide/haxchi/browser-exploit.md index 826e038f3..8853ba483 100644 --- a/translations/sv_SE/docs/user-guide/haxchi/browser-exploit.md +++ b/translations/sv_SE/docs/user-guide/haxchi/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/sv_SE/docs/user-guide/haxchi/nand-backup.md b/translations/sv_SE/docs/user-guide/haxchi/nand-backup.md index 75200207a..9d6d642ad 100644 --- a/translations/sv_SE/docs/user-guide/haxchi/nand-backup.md +++ b/translations/sv_SE/docs/user-guide/haxchi/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/sv_SE/docs/user-guide/mocha/indexiine/browser-exploit.md b/translations/sv_SE/docs/user-guide/mocha/indexiine/browser-exploit.md index 83505773d..c14364eb9 100644 --- a/translations/sv_SE/docs/user-guide/mocha/indexiine/browser-exploit.md +++ b/translations/sv_SE/docs/user-guide/mocha/indexiine/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/sv_SE/docs/user-guide/mocha/indexiine/browser-modding.md b/translations/sv_SE/docs/user-guide/mocha/indexiine/browser-modding.md index 2aa249f4c..2bdfe4a37 100644 --- a/translations/sv_SE/docs/user-guide/mocha/indexiine/browser-modding.md +++ b/translations/sv_SE/docs/user-guide/mocha/indexiine/browser-modding.md @@ -12,7 +12,7 @@ Now that you have your NAND backup in case anything goes wrong later, you can in 1. Turn on your Wii U. 1. Launch the internet browser and open the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. 1. Navigate through the Homebrew Launcher and launch the `Indexiine Installer` app. 1. Press the A button to install Indexiine. 1. When the process completed, close the Homebrew Launcher to get back to your Wii U menu. diff --git a/translations/sv_SE/docs/user-guide/mocha/indexiine/nand-backup.md b/translations/sv_SE/docs/user-guide/mocha/indexiine/nand-backup.md index b0809c71c..88814cff8 100644 --- a/translations/sv_SE/docs/user-guide/mocha/indexiine/nand-backup.md +++ b/translations/sv_SE/docs/user-guide/mocha/indexiine/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/sv_SE/docs/user-guide/mocha/online-exploit/browser-exploit.md b/translations/sv_SE/docs/user-guide/mocha/online-exploit/browser-exploit.md index 8cbf2c754..30b7c94c5 100644 --- a/translations/sv_SE/docs/user-guide/mocha/online-exploit/browser-exploit.md +++ b/translations/sv_SE/docs/user-guide/mocha/online-exploit/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/sv_SE/docs/user-guide/mocha/online-exploit/nand-backup.md b/translations/sv_SE/docs/user-guide/mocha/online-exploit/nand-backup.md index 6513b4f51..adcbfaf3a 100644 --- a/translations/sv_SE/docs/user-guide/mocha/online-exploit/nand-backup.md +++ b/translations/sv_SE/docs/user-guide/mocha/online-exploit/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/sv_SE/docs/vwii/vwii-modding.md b/translations/sv_SE/docs/vwii/vwii-modding.md index c301b7b7f..64bdca1af 100644 --- a/translations/sv_SE/docs/vwii/vwii-modding.md +++ b/translations/sv_SE/docs/vwii/vwii-modding.md @@ -35,11 +35,11 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch the `Wii U NAND Dumper` application. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **optional** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **optional** + - Dump SLC: **optional** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **optional** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slccmpt.bin`, `otp.bin` and if you chose to go with a full backup, `seeprom.bin`, `slc.bin`, and `every mlc.bin.part` file to your computer. @@ -51,10 +51,10 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `A` to backup the Mii Channel and inject the Hackmii Installer then wait until it says Successfully injected wuphax!. - - You will be taken back to the Wii U Menu after a few seconds. + - You will be taken back to the Wii U Menu after a few seconds. 1. Launch vWii (the Wii Menu icon). 1. Launch the vWii Mii Channel. - - If Wuphax has successfully been injected, you will now see the scam warning screen. + - If Wuphax has successfully been injected, you will now see the scam warning screen. 1. Wait until you see `Press 1 to continue` and then press the `1` button. 1. Select `continue`, Install The Homebrew Channel and `Yes, continue`. 1. If The Homebrew Channel has successfully been installed, select `continue` and then `exit`. @@ -62,8 +62,8 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `B` to restore the Mii Channel then wait until it says Mii Channel restored!. - - You will be taken back to the Wii U Menu after a few seconds. - - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). + - You will be taken back to the Wii U Menu after a few seconds. + - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). ### Installing cIOSes @@ -75,19 +75,19 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch The Homebrew Channel. 1. Launch d2x cIOS Installer. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `56` - - Select cIOS slot: `249` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `56` + - Select cIOS slot: `249` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `57` - - Select cIOS slot: `250` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `57` + - Select cIOS slot: `250` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `58` - - Select cIOS slot: `251` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `58` + - Select cIOS slot: `251` 1. Press the `A` button to install. 1. Press the `B` button to exit. diff --git a/translations/th_TH/docs/extras/block-updates.md b/translations/th_TH/docs/extras/block-updates.md index 138f56793..6d1a63a79 100644 --- a/translations/th_TH/docs/extras/block-updates.md +++ b/translations/th_TH/docs/extras/block-updates.md @@ -30,8 +30,8 @@ Currently, two ways exist to block updates on the Wii U system: 1. Plug the SD Card into your Wii U console and power it on. 1. Enter the Wii U's system settings and navigate to `Internet > Connect to the Internet > Connection List >` `Your WiFi connection > Change Settings > DNS` and set the option to `Do not auto-obtain`. 1. You will be asked to input a primary and secondary DNS. Enter the following IP addresses: - - Primary DNS: 168.235.092.108 - - Secondary DNS: 081.004.127.020 DNS Block + - Primary DNS: 168.235.092.108 + - Secondary DNS: 081.004.127.020 DNS Block 1. Click on confirm. 1. You are now blocking updates. In order to access the eShop, run the NNUPatcher app from the Homebrew Launcher before launching the eShop. diff --git a/translations/th_TH/docs/extras/configurable-payload.md b/translations/th_TH/docs/extras/configurable-payload.md index 68e33baea..3068e9e1c 100644 --- a/translations/th_TH/docs/extras/configurable-payload.md +++ b/translations/th_TH/docs/extras/configurable-payload.md @@ -19,4 +19,4 @@ This payload is configurable, similar to Haxchi's configuration. This could be v 1. Extract the `Configurable_Payload.zip` file to the root of your SD Card. If it prompts you to overwrite the files on your SD Card, do so. 1. Place the SD Card into your Wii U and launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. If everything has been done correctly, you should be taken back to the Wii U Menu. Mocha has now been enabled and you can use the Homebrew Launcher Channel you installed earlier. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. diff --git a/translations/th_TH/docs/extras/dump-games.md b/translations/th_TH/docs/extras/dump-games.md index 63c7044ae..d7b48a17a 100644 --- a/translations/th_TH/docs/extras/dump-games.md +++ b/translations/th_TH/docs/extras/dump-games.md @@ -103,11 +103,11 @@ Dumping your Discs allows you to install a copy of your game to the system NAND/ 1. Plug in your USB device. The Wii U will ask you format it. Cancel with No! 1. Launch the Homebrew Launcher and start the MochaFAT32 app. 1. In the configuration menu, set the following settings: - - Config view mode: default - - Skip this menu on launch: on - - Don't relaunch OS: off - - Launch System Menu: on - - RedNAND: off + - Config view mode: default + - Skip this menu on launch: on + - Don't relaunch OS: off + - Launch System Menu: on + - RedNAND: off 1. Your console will load the Wii U menu with your USB device now replacing the SD Card. 1. Launch the Homebrew Launcher and open the disc2app app. 1. Eject any inserted game disc and press the A button to begin the dumping process. diff --git a/translations/th_TH/docs/extras/dump-wii-games.md b/translations/th_TH/docs/extras/dump-wii-games.md index db3692a09..1d98d4209 100644 --- a/translations/th_TH/docs/extras/dump-wii-games.md +++ b/translations/th_TH/docs/extras/dump-wii-games.md @@ -24,15 +24,15 @@ Dumping your Discs allows you to: play them on a Wii emulator (namely Dolphin), 1. Read the Disclaimer then press A. 1. Select Yes to enable Checksum Calculations. 1. Select either USB or Front SD depending on which device you want to use for the dumping process. - - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. + - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. 1. Press A to continue. 1. Select No on the screen that asks you to download redump.org DAT files. 1. Insert your disc then press A. 1. Go [on this page](https://wiki.dolphin-emu.org/index.php?title=Category:Dual_Layer_Disc_games) to see if your disc is dual-layered. 1. Set everything to match the following: - - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) - - Chunk Size: `Max` - - New device per chunk: `No` + - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) + - Chunk Size: `Max` + - New device per chunk: `No` 1. If you want to dump multiple discs, select Yes to remember your settings. If not, select No. ?> Be prepared to wait a while. The dumping process can take 30 minutes to 1 hour depending on your SD Card's speeds. diff --git a/translations/th_TH/docs/troubleshooting/fix-errcode-112-1037.md b/translations/th_TH/docs/troubleshooting/fix-errcode-112-1037.md index 98b8f454c..bce0e7fae 100644 --- a/translations/th_TH/docs/troubleshooting/fix-errcode-112-1037.md +++ b/translations/th_TH/docs/troubleshooting/fix-errcode-112-1037.md @@ -25,14 +25,14 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a command prompt window. 1. Use the following command: `cd `. - - Example: cd C:\Users\username\Downloads. + - Example: cd C:\Users\username\Downloads. 1. Use the following command: `py -3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. @@ -45,15 +45,15 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a Terminal window. 1. Use the following command: `cd `. - - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. - - On Linux, the most common place to find your downloaded files is /home/username/Downloads. + - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. + - On Linux, the most common place to find your downloaded files is /home/username/Downloads. 1. Use the following command: `python3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. diff --git a/translations/th_TH/docs/user-guide/cbhc/browser-exploit.md b/translations/th_TH/docs/user-guide/cbhc/browser-exploit.md index 6e1553c47..aa6e836d9 100644 --- a/translations/th_TH/docs/user-guide/cbhc/browser-exploit.md +++ b/translations/th_TH/docs/user-guide/cbhc/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/th_TH/docs/user-guide/cbhc/nand-backup.md b/translations/th_TH/docs/user-guide/cbhc/nand-backup.md index e24bdaf1b..e324b7a81 100644 --- a/translations/th_TH/docs/user-guide/cbhc/nand-backup.md +++ b/translations/th_TH/docs/user-guide/cbhc/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/th_TH/docs/user-guide/haxchi/browser-exploit.md b/translations/th_TH/docs/user-guide/haxchi/browser-exploit.md index 826e038f3..8853ba483 100644 --- a/translations/th_TH/docs/user-guide/haxchi/browser-exploit.md +++ b/translations/th_TH/docs/user-guide/haxchi/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/th_TH/docs/user-guide/haxchi/nand-backup.md b/translations/th_TH/docs/user-guide/haxchi/nand-backup.md index 75200207a..9d6d642ad 100644 --- a/translations/th_TH/docs/user-guide/haxchi/nand-backup.md +++ b/translations/th_TH/docs/user-guide/haxchi/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/th_TH/docs/user-guide/mocha/indexiine/browser-exploit.md b/translations/th_TH/docs/user-guide/mocha/indexiine/browser-exploit.md index 83505773d..c14364eb9 100644 --- a/translations/th_TH/docs/user-guide/mocha/indexiine/browser-exploit.md +++ b/translations/th_TH/docs/user-guide/mocha/indexiine/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/th_TH/docs/user-guide/mocha/indexiine/browser-modding.md b/translations/th_TH/docs/user-guide/mocha/indexiine/browser-modding.md index 2aa249f4c..2bdfe4a37 100644 --- a/translations/th_TH/docs/user-guide/mocha/indexiine/browser-modding.md +++ b/translations/th_TH/docs/user-guide/mocha/indexiine/browser-modding.md @@ -12,7 +12,7 @@ Now that you have your NAND backup in case anything goes wrong later, you can in 1. Turn on your Wii U. 1. Launch the internet browser and open the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. 1. Navigate through the Homebrew Launcher and launch the `Indexiine Installer` app. 1. Press the A button to install Indexiine. 1. When the process completed, close the Homebrew Launcher to get back to your Wii U menu. diff --git a/translations/th_TH/docs/user-guide/mocha/indexiine/nand-backup.md b/translations/th_TH/docs/user-guide/mocha/indexiine/nand-backup.md index b0809c71c..88814cff8 100644 --- a/translations/th_TH/docs/user-guide/mocha/indexiine/nand-backup.md +++ b/translations/th_TH/docs/user-guide/mocha/indexiine/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/th_TH/docs/user-guide/mocha/online-exploit/browser-exploit.md b/translations/th_TH/docs/user-guide/mocha/online-exploit/browser-exploit.md index 8cbf2c754..30b7c94c5 100644 --- a/translations/th_TH/docs/user-guide/mocha/online-exploit/browser-exploit.md +++ b/translations/th_TH/docs/user-guide/mocha/online-exploit/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/th_TH/docs/user-guide/mocha/online-exploit/nand-backup.md b/translations/th_TH/docs/user-guide/mocha/online-exploit/nand-backup.md index 6513b4f51..adcbfaf3a 100644 --- a/translations/th_TH/docs/user-guide/mocha/online-exploit/nand-backup.md +++ b/translations/th_TH/docs/user-guide/mocha/online-exploit/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/th_TH/docs/vwii/vwii-modding.md b/translations/th_TH/docs/vwii/vwii-modding.md index c301b7b7f..64bdca1af 100644 --- a/translations/th_TH/docs/vwii/vwii-modding.md +++ b/translations/th_TH/docs/vwii/vwii-modding.md @@ -35,11 +35,11 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch the `Wii U NAND Dumper` application. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **optional** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **optional** + - Dump SLC: **optional** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **optional** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slccmpt.bin`, `otp.bin` and if you chose to go with a full backup, `seeprom.bin`, `slc.bin`, and `every mlc.bin.part` file to your computer. @@ -51,10 +51,10 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `A` to backup the Mii Channel and inject the Hackmii Installer then wait until it says Successfully injected wuphax!. - - You will be taken back to the Wii U Menu after a few seconds. + - You will be taken back to the Wii U Menu after a few seconds. 1. Launch vWii (the Wii Menu icon). 1. Launch the vWii Mii Channel. - - If Wuphax has successfully been injected, you will now see the scam warning screen. + - If Wuphax has successfully been injected, you will now see the scam warning screen. 1. Wait until you see `Press 1 to continue` and then press the `1` button. 1. Select `continue`, Install The Homebrew Channel and `Yes, continue`. 1. If The Homebrew Channel has successfully been installed, select `continue` and then `exit`. @@ -62,8 +62,8 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `B` to restore the Mii Channel then wait until it says Mii Channel restored!. - - You will be taken back to the Wii U Menu after a few seconds. - - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). + - You will be taken back to the Wii U Menu after a few seconds. + - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). ### Installing cIOSes @@ -75,19 +75,19 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch The Homebrew Channel. 1. Launch d2x cIOS Installer. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `56` - - Select cIOS slot: `249` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `56` + - Select cIOS slot: `249` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `57` - - Select cIOS slot: `250` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `57` + - Select cIOS slot: `250` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `58` - - Select cIOS slot: `251` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `58` + - Select cIOS slot: `251` 1. Press the `A` button to install. 1. Press the `B` button to exit. diff --git a/translations/tr_TR/docs/extras/block-updates.md b/translations/tr_TR/docs/extras/block-updates.md index 138f56793..6d1a63a79 100644 --- a/translations/tr_TR/docs/extras/block-updates.md +++ b/translations/tr_TR/docs/extras/block-updates.md @@ -30,8 +30,8 @@ Currently, two ways exist to block updates on the Wii U system: 1. Plug the SD Card into your Wii U console and power it on. 1. Enter the Wii U's system settings and navigate to `Internet > Connect to the Internet > Connection List >` `Your WiFi connection > Change Settings > DNS` and set the option to `Do not auto-obtain`. 1. You will be asked to input a primary and secondary DNS. Enter the following IP addresses: - - Primary DNS: 168.235.092.108 - - Secondary DNS: 081.004.127.020 DNS Block + - Primary DNS: 168.235.092.108 + - Secondary DNS: 081.004.127.020 DNS Block 1. Click on confirm. 1. You are now blocking updates. In order to access the eShop, run the NNUPatcher app from the Homebrew Launcher before launching the eShop. diff --git a/translations/tr_TR/docs/extras/configurable-payload.md b/translations/tr_TR/docs/extras/configurable-payload.md index 68e33baea..3068e9e1c 100644 --- a/translations/tr_TR/docs/extras/configurable-payload.md +++ b/translations/tr_TR/docs/extras/configurable-payload.md @@ -19,4 +19,4 @@ This payload is configurable, similar to Haxchi's configuration. This could be v 1. Extract the `Configurable_Payload.zip` file to the root of your SD Card. If it prompts you to overwrite the files on your SD Card, do so. 1. Place the SD Card into your Wii U and launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. If everything has been done correctly, you should be taken back to the Wii U Menu. Mocha has now been enabled and you can use the Homebrew Launcher Channel you installed earlier. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. diff --git a/translations/tr_TR/docs/extras/dump-games.md b/translations/tr_TR/docs/extras/dump-games.md index 63c7044ae..d7b48a17a 100644 --- a/translations/tr_TR/docs/extras/dump-games.md +++ b/translations/tr_TR/docs/extras/dump-games.md @@ -103,11 +103,11 @@ Dumping your Discs allows you to install a copy of your game to the system NAND/ 1. Plug in your USB device. The Wii U will ask you format it. Cancel with No! 1. Launch the Homebrew Launcher and start the MochaFAT32 app. 1. In the configuration menu, set the following settings: - - Config view mode: default - - Skip this menu on launch: on - - Don't relaunch OS: off - - Launch System Menu: on - - RedNAND: off + - Config view mode: default + - Skip this menu on launch: on + - Don't relaunch OS: off + - Launch System Menu: on + - RedNAND: off 1. Your console will load the Wii U menu with your USB device now replacing the SD Card. 1. Launch the Homebrew Launcher and open the disc2app app. 1. Eject any inserted game disc and press the A button to begin the dumping process. diff --git a/translations/tr_TR/docs/extras/dump-wii-games.md b/translations/tr_TR/docs/extras/dump-wii-games.md index db3692a09..1d98d4209 100644 --- a/translations/tr_TR/docs/extras/dump-wii-games.md +++ b/translations/tr_TR/docs/extras/dump-wii-games.md @@ -24,15 +24,15 @@ Dumping your Discs allows you to: play them on a Wii emulator (namely Dolphin), 1. Read the Disclaimer then press A. 1. Select Yes to enable Checksum Calculations. 1. Select either USB or Front SD depending on which device you want to use for the dumping process. - - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. + - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. 1. Press A to continue. 1. Select No on the screen that asks you to download redump.org DAT files. 1. Insert your disc then press A. 1. Go [on this page](https://wiki.dolphin-emu.org/index.php?title=Category:Dual_Layer_Disc_games) to see if your disc is dual-layered. 1. Set everything to match the following: - - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) - - Chunk Size: `Max` - - New device per chunk: `No` + - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) + - Chunk Size: `Max` + - New device per chunk: `No` 1. If you want to dump multiple discs, select Yes to remember your settings. If not, select No. ?> Be prepared to wait a while. The dumping process can take 30 minutes to 1 hour depending on your SD Card's speeds. diff --git a/translations/tr_TR/docs/troubleshooting/fix-errcode-112-1037.md b/translations/tr_TR/docs/troubleshooting/fix-errcode-112-1037.md index 98b8f454c..bce0e7fae 100644 --- a/translations/tr_TR/docs/troubleshooting/fix-errcode-112-1037.md +++ b/translations/tr_TR/docs/troubleshooting/fix-errcode-112-1037.md @@ -25,14 +25,14 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a command prompt window. 1. Use the following command: `cd `. - - Example: cd C:\Users\username\Downloads. + - Example: cd C:\Users\username\Downloads. 1. Use the following command: `py -3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. @@ -45,15 +45,15 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a Terminal window. 1. Use the following command: `cd `. - - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. - - On Linux, the most common place to find your downloaded files is /home/username/Downloads. + - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. + - On Linux, the most common place to find your downloaded files is /home/username/Downloads. 1. Use the following command: `python3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. diff --git a/translations/tr_TR/docs/user-guide/cbhc/browser-exploit.md b/translations/tr_TR/docs/user-guide/cbhc/browser-exploit.md index 6e1553c47..aa6e836d9 100644 --- a/translations/tr_TR/docs/user-guide/cbhc/browser-exploit.md +++ b/translations/tr_TR/docs/user-guide/cbhc/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/tr_TR/docs/user-guide/cbhc/nand-backup.md b/translations/tr_TR/docs/user-guide/cbhc/nand-backup.md index e24bdaf1b..e324b7a81 100644 --- a/translations/tr_TR/docs/user-guide/cbhc/nand-backup.md +++ b/translations/tr_TR/docs/user-guide/cbhc/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/tr_TR/docs/user-guide/haxchi/browser-exploit.md b/translations/tr_TR/docs/user-guide/haxchi/browser-exploit.md index 826e038f3..8853ba483 100644 --- a/translations/tr_TR/docs/user-guide/haxchi/browser-exploit.md +++ b/translations/tr_TR/docs/user-guide/haxchi/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/tr_TR/docs/user-guide/haxchi/nand-backup.md b/translations/tr_TR/docs/user-guide/haxchi/nand-backup.md index 75200207a..9d6d642ad 100644 --- a/translations/tr_TR/docs/user-guide/haxchi/nand-backup.md +++ b/translations/tr_TR/docs/user-guide/haxchi/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/tr_TR/docs/user-guide/mocha/indexiine/browser-exploit.md b/translations/tr_TR/docs/user-guide/mocha/indexiine/browser-exploit.md index 83505773d..c14364eb9 100644 --- a/translations/tr_TR/docs/user-guide/mocha/indexiine/browser-exploit.md +++ b/translations/tr_TR/docs/user-guide/mocha/indexiine/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/tr_TR/docs/user-guide/mocha/indexiine/browser-modding.md b/translations/tr_TR/docs/user-guide/mocha/indexiine/browser-modding.md index 2aa249f4c..2bdfe4a37 100644 --- a/translations/tr_TR/docs/user-guide/mocha/indexiine/browser-modding.md +++ b/translations/tr_TR/docs/user-guide/mocha/indexiine/browser-modding.md @@ -12,7 +12,7 @@ Now that you have your NAND backup in case anything goes wrong later, you can in 1. Turn on your Wii U. 1. Launch the internet browser and open the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. 1. Navigate through the Homebrew Launcher and launch the `Indexiine Installer` app. 1. Press the A button to install Indexiine. 1. When the process completed, close the Homebrew Launcher to get back to your Wii U menu. diff --git a/translations/tr_TR/docs/user-guide/mocha/indexiine/nand-backup.md b/translations/tr_TR/docs/user-guide/mocha/indexiine/nand-backup.md index b0809c71c..88814cff8 100644 --- a/translations/tr_TR/docs/user-guide/mocha/indexiine/nand-backup.md +++ b/translations/tr_TR/docs/user-guide/mocha/indexiine/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/tr_TR/docs/user-guide/mocha/online-exploit/browser-exploit.md b/translations/tr_TR/docs/user-guide/mocha/online-exploit/browser-exploit.md index 8cbf2c754..30b7c94c5 100644 --- a/translations/tr_TR/docs/user-guide/mocha/online-exploit/browser-exploit.md +++ b/translations/tr_TR/docs/user-guide/mocha/online-exploit/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/tr_TR/docs/user-guide/mocha/online-exploit/nand-backup.md b/translations/tr_TR/docs/user-guide/mocha/online-exploit/nand-backup.md index 6513b4f51..adcbfaf3a 100644 --- a/translations/tr_TR/docs/user-guide/mocha/online-exploit/nand-backup.md +++ b/translations/tr_TR/docs/user-guide/mocha/online-exploit/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/tr_TR/docs/vwii/vwii-modding.md b/translations/tr_TR/docs/vwii/vwii-modding.md index c301b7b7f..64bdca1af 100644 --- a/translations/tr_TR/docs/vwii/vwii-modding.md +++ b/translations/tr_TR/docs/vwii/vwii-modding.md @@ -35,11 +35,11 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch the `Wii U NAND Dumper` application. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **optional** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **optional** + - Dump SLC: **optional** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **optional** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slccmpt.bin`, `otp.bin` and if you chose to go with a full backup, `seeprom.bin`, `slc.bin`, and `every mlc.bin.part` file to your computer. @@ -51,10 +51,10 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `A` to backup the Mii Channel and inject the Hackmii Installer then wait until it says Successfully injected wuphax!. - - You will be taken back to the Wii U Menu after a few seconds. + - You will be taken back to the Wii U Menu after a few seconds. 1. Launch vWii (the Wii Menu icon). 1. Launch the vWii Mii Channel. - - If Wuphax has successfully been injected, you will now see the scam warning screen. + - If Wuphax has successfully been injected, you will now see the scam warning screen. 1. Wait until you see `Press 1 to continue` and then press the `1` button. 1. Select `continue`, Install The Homebrew Channel and `Yes, continue`. 1. If The Homebrew Channel has successfully been installed, select `continue` and then `exit`. @@ -62,8 +62,8 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `B` to restore the Mii Channel then wait until it says Mii Channel restored!. - - You will be taken back to the Wii U Menu after a few seconds. - - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). + - You will be taken back to the Wii U Menu after a few seconds. + - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). ### Installing cIOSes @@ -75,19 +75,19 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch The Homebrew Channel. 1. Launch d2x cIOS Installer. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `56` - - Select cIOS slot: `249` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `56` + - Select cIOS slot: `249` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `57` - - Select cIOS slot: `250` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `57` + - Select cIOS slot: `250` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `58` - - Select cIOS slot: `251` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `58` + - Select cIOS slot: `251` 1. Press the `A` button to install. 1. Press the `B` button to exit. diff --git a/translations/uk_UA/docs/extras/block-updates.md b/translations/uk_UA/docs/extras/block-updates.md index 138f56793..6d1a63a79 100644 --- a/translations/uk_UA/docs/extras/block-updates.md +++ b/translations/uk_UA/docs/extras/block-updates.md @@ -30,8 +30,8 @@ Currently, two ways exist to block updates on the Wii U system: 1. Plug the SD Card into your Wii U console and power it on. 1. Enter the Wii U's system settings and navigate to `Internet > Connect to the Internet > Connection List >` `Your WiFi connection > Change Settings > DNS` and set the option to `Do not auto-obtain`. 1. You will be asked to input a primary and secondary DNS. Enter the following IP addresses: - - Primary DNS: 168.235.092.108 - - Secondary DNS: 081.004.127.020 DNS Block + - Primary DNS: 168.235.092.108 + - Secondary DNS: 081.004.127.020 DNS Block 1. Click on confirm. 1. You are now blocking updates. In order to access the eShop, run the NNUPatcher app from the Homebrew Launcher before launching the eShop. diff --git a/translations/uk_UA/docs/extras/configurable-payload.md b/translations/uk_UA/docs/extras/configurable-payload.md index 68e33baea..3068e9e1c 100644 --- a/translations/uk_UA/docs/extras/configurable-payload.md +++ b/translations/uk_UA/docs/extras/configurable-payload.md @@ -19,4 +19,4 @@ This payload is configurable, similar to Haxchi's configuration. This could be v 1. Extract the `Configurable_Payload.zip` file to the root of your SD Card. If it prompts you to overwrite the files on your SD Card, do so. 1. Place the SD Card into your Wii U and launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. If everything has been done correctly, you should be taken back to the Wii U Menu. Mocha has now been enabled and you can use the Homebrew Launcher Channel you installed earlier. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. diff --git a/translations/uk_UA/docs/extras/dump-games.md b/translations/uk_UA/docs/extras/dump-games.md index 63c7044ae..d7b48a17a 100644 --- a/translations/uk_UA/docs/extras/dump-games.md +++ b/translations/uk_UA/docs/extras/dump-games.md @@ -103,11 +103,11 @@ Dumping your Discs allows you to install a copy of your game to the system NAND/ 1. Plug in your USB device. The Wii U will ask you format it. Cancel with No! 1. Launch the Homebrew Launcher and start the MochaFAT32 app. 1. In the configuration menu, set the following settings: - - Config view mode: default - - Skip this menu on launch: on - - Don't relaunch OS: off - - Launch System Menu: on - - RedNAND: off + - Config view mode: default + - Skip this menu on launch: on + - Don't relaunch OS: off + - Launch System Menu: on + - RedNAND: off 1. Your console will load the Wii U menu with your USB device now replacing the SD Card. 1. Launch the Homebrew Launcher and open the disc2app app. 1. Eject any inserted game disc and press the A button to begin the dumping process. diff --git a/translations/uk_UA/docs/extras/dump-wii-games.md b/translations/uk_UA/docs/extras/dump-wii-games.md index db3692a09..1d98d4209 100644 --- a/translations/uk_UA/docs/extras/dump-wii-games.md +++ b/translations/uk_UA/docs/extras/dump-wii-games.md @@ -24,15 +24,15 @@ Dumping your Discs allows you to: play them on a Wii emulator (namely Dolphin), 1. Read the Disclaimer then press A. 1. Select Yes to enable Checksum Calculations. 1. Select either USB or Front SD depending on which device you want to use for the dumping process. - - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. + - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. 1. Press A to continue. 1. Select No on the screen that asks you to download redump.org DAT files. 1. Insert your disc then press A. 1. Go [on this page](https://wiki.dolphin-emu.org/index.php?title=Category:Dual_Layer_Disc_games) to see if your disc is dual-layered. 1. Set everything to match the following: - - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) - - Chunk Size: `Max` - - New device per chunk: `No` + - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) + - Chunk Size: `Max` + - New device per chunk: `No` 1. If you want to dump multiple discs, select Yes to remember your settings. If not, select No. ?> Be prepared to wait a while. The dumping process can take 30 minutes to 1 hour depending on your SD Card's speeds. diff --git a/translations/uk_UA/docs/troubleshooting/fix-errcode-112-1037.md b/translations/uk_UA/docs/troubleshooting/fix-errcode-112-1037.md index 98b8f454c..bce0e7fae 100644 --- a/translations/uk_UA/docs/troubleshooting/fix-errcode-112-1037.md +++ b/translations/uk_UA/docs/troubleshooting/fix-errcode-112-1037.md @@ -25,14 +25,14 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a command prompt window. 1. Use the following command: `cd `. - - Example: cd C:\Users\username\Downloads. + - Example: cd C:\Users\username\Downloads. 1. Use the following command: `py -3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. @@ -45,15 +45,15 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a Terminal window. 1. Use the following command: `cd `. - - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. - - On Linux, the most common place to find your downloaded files is /home/username/Downloads. + - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. + - On Linux, the most common place to find your downloaded files is /home/username/Downloads. 1. Use the following command: `python3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. diff --git a/translations/uk_UA/docs/user-guide/cbhc/browser-exploit.md b/translations/uk_UA/docs/user-guide/cbhc/browser-exploit.md index 6e1553c47..aa6e836d9 100644 --- a/translations/uk_UA/docs/user-guide/cbhc/browser-exploit.md +++ b/translations/uk_UA/docs/user-guide/cbhc/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/uk_UA/docs/user-guide/cbhc/nand-backup.md b/translations/uk_UA/docs/user-guide/cbhc/nand-backup.md index e24bdaf1b..e324b7a81 100644 --- a/translations/uk_UA/docs/user-guide/cbhc/nand-backup.md +++ b/translations/uk_UA/docs/user-guide/cbhc/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/uk_UA/docs/user-guide/haxchi/browser-exploit.md b/translations/uk_UA/docs/user-guide/haxchi/browser-exploit.md index 826e038f3..8853ba483 100644 --- a/translations/uk_UA/docs/user-guide/haxchi/browser-exploit.md +++ b/translations/uk_UA/docs/user-guide/haxchi/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/uk_UA/docs/user-guide/haxchi/nand-backup.md b/translations/uk_UA/docs/user-guide/haxchi/nand-backup.md index 75200207a..9d6d642ad 100644 --- a/translations/uk_UA/docs/user-guide/haxchi/nand-backup.md +++ b/translations/uk_UA/docs/user-guide/haxchi/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/uk_UA/docs/user-guide/mocha/indexiine/browser-exploit.md b/translations/uk_UA/docs/user-guide/mocha/indexiine/browser-exploit.md index 83505773d..c14364eb9 100644 --- a/translations/uk_UA/docs/user-guide/mocha/indexiine/browser-exploit.md +++ b/translations/uk_UA/docs/user-guide/mocha/indexiine/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/uk_UA/docs/user-guide/mocha/indexiine/browser-modding.md b/translations/uk_UA/docs/user-guide/mocha/indexiine/browser-modding.md index 2aa249f4c..2bdfe4a37 100644 --- a/translations/uk_UA/docs/user-guide/mocha/indexiine/browser-modding.md +++ b/translations/uk_UA/docs/user-guide/mocha/indexiine/browser-modding.md @@ -12,7 +12,7 @@ Now that you have your NAND backup in case anything goes wrong later, you can in 1. Turn on your Wii U. 1. Launch the internet browser and open the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. 1. Navigate through the Homebrew Launcher and launch the `Indexiine Installer` app. 1. Press the A button to install Indexiine. 1. When the process completed, close the Homebrew Launcher to get back to your Wii U menu. diff --git a/translations/uk_UA/docs/user-guide/mocha/indexiine/nand-backup.md b/translations/uk_UA/docs/user-guide/mocha/indexiine/nand-backup.md index b0809c71c..88814cff8 100644 --- a/translations/uk_UA/docs/user-guide/mocha/indexiine/nand-backup.md +++ b/translations/uk_UA/docs/user-guide/mocha/indexiine/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/uk_UA/docs/user-guide/mocha/online-exploit/browser-exploit.md b/translations/uk_UA/docs/user-guide/mocha/online-exploit/browser-exploit.md index 8cbf2c754..30b7c94c5 100644 --- a/translations/uk_UA/docs/user-guide/mocha/online-exploit/browser-exploit.md +++ b/translations/uk_UA/docs/user-guide/mocha/online-exploit/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/uk_UA/docs/user-guide/mocha/online-exploit/nand-backup.md b/translations/uk_UA/docs/user-guide/mocha/online-exploit/nand-backup.md index 6513b4f51..adcbfaf3a 100644 --- a/translations/uk_UA/docs/user-guide/mocha/online-exploit/nand-backup.md +++ b/translations/uk_UA/docs/user-guide/mocha/online-exploit/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/uk_UA/docs/vwii/vwii-modding.md b/translations/uk_UA/docs/vwii/vwii-modding.md index c301b7b7f..64bdca1af 100644 --- a/translations/uk_UA/docs/vwii/vwii-modding.md +++ b/translations/uk_UA/docs/vwii/vwii-modding.md @@ -35,11 +35,11 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch the `Wii U NAND Dumper` application. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **optional** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **optional** + - Dump SLC: **optional** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **optional** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slccmpt.bin`, `otp.bin` and if you chose to go with a full backup, `seeprom.bin`, `slc.bin`, and `every mlc.bin.part` file to your computer. @@ -51,10 +51,10 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `A` to backup the Mii Channel and inject the Hackmii Installer then wait until it says Successfully injected wuphax!. - - You will be taken back to the Wii U Menu after a few seconds. + - You will be taken back to the Wii U Menu after a few seconds. 1. Launch vWii (the Wii Menu icon). 1. Launch the vWii Mii Channel. - - If Wuphax has successfully been injected, you will now see the scam warning screen. + - If Wuphax has successfully been injected, you will now see the scam warning screen. 1. Wait until you see `Press 1 to continue` and then press the `1` button. 1. Select `continue`, Install The Homebrew Channel and `Yes, continue`. 1. If The Homebrew Channel has successfully been installed, select `continue` and then `exit`. @@ -62,8 +62,8 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `B` to restore the Mii Channel then wait until it says Mii Channel restored!. - - You will be taken back to the Wii U Menu after a few seconds. - - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). + - You will be taken back to the Wii U Menu after a few seconds. + - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). ### Installing cIOSes @@ -75,19 +75,19 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch The Homebrew Channel. 1. Launch d2x cIOS Installer. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `56` - - Select cIOS slot: `249` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `56` + - Select cIOS slot: `249` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `57` - - Select cIOS slot: `250` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `57` + - Select cIOS slot: `250` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `58` - - Select cIOS slot: `251` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `58` + - Select cIOS slot: `251` 1. Press the `A` button to install. 1. Press the `B` button to exit. diff --git a/translations/vi_VN/docs/extras/block-updates.md b/translations/vi_VN/docs/extras/block-updates.md index 138f56793..6d1a63a79 100644 --- a/translations/vi_VN/docs/extras/block-updates.md +++ b/translations/vi_VN/docs/extras/block-updates.md @@ -30,8 +30,8 @@ Currently, two ways exist to block updates on the Wii U system: 1. Plug the SD Card into your Wii U console and power it on. 1. Enter the Wii U's system settings and navigate to `Internet > Connect to the Internet > Connection List >` `Your WiFi connection > Change Settings > DNS` and set the option to `Do not auto-obtain`. 1. You will be asked to input a primary and secondary DNS. Enter the following IP addresses: - - Primary DNS: 168.235.092.108 - - Secondary DNS: 081.004.127.020 DNS Block + - Primary DNS: 168.235.092.108 + - Secondary DNS: 081.004.127.020 DNS Block 1. Click on confirm. 1. You are now blocking updates. In order to access the eShop, run the NNUPatcher app from the Homebrew Launcher before launching the eShop. diff --git a/translations/vi_VN/docs/extras/configurable-payload.md b/translations/vi_VN/docs/extras/configurable-payload.md index 68e33baea..3068e9e1c 100644 --- a/translations/vi_VN/docs/extras/configurable-payload.md +++ b/translations/vi_VN/docs/extras/configurable-payload.md @@ -19,4 +19,4 @@ This payload is configurable, similar to Haxchi's configuration. This could be v 1. Extract the `Configurable_Payload.zip` file to the root of your SD Card. If it prompts you to overwrite the files on your SD Card, do so. 1. Place the SD Card into your Wii U and launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. If everything has been done correctly, you should be taken back to the Wii U Menu. Mocha has now been enabled and you can use the Homebrew Launcher Channel you installed earlier. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. diff --git a/translations/vi_VN/docs/extras/dump-games.md b/translations/vi_VN/docs/extras/dump-games.md index 63c7044ae..d7b48a17a 100644 --- a/translations/vi_VN/docs/extras/dump-games.md +++ b/translations/vi_VN/docs/extras/dump-games.md @@ -103,11 +103,11 @@ Dumping your Discs allows you to install a copy of your game to the system NAND/ 1. Plug in your USB device. The Wii U will ask you format it. Cancel with No! 1. Launch the Homebrew Launcher and start the MochaFAT32 app. 1. In the configuration menu, set the following settings: - - Config view mode: default - - Skip this menu on launch: on - - Don't relaunch OS: off - - Launch System Menu: on - - RedNAND: off + - Config view mode: default + - Skip this menu on launch: on + - Don't relaunch OS: off + - Launch System Menu: on + - RedNAND: off 1. Your console will load the Wii U menu with your USB device now replacing the SD Card. 1. Launch the Homebrew Launcher and open the disc2app app. 1. Eject any inserted game disc and press the A button to begin the dumping process. diff --git a/translations/vi_VN/docs/extras/dump-wii-games.md b/translations/vi_VN/docs/extras/dump-wii-games.md index db3692a09..1d98d4209 100644 --- a/translations/vi_VN/docs/extras/dump-wii-games.md +++ b/translations/vi_VN/docs/extras/dump-wii-games.md @@ -24,15 +24,15 @@ Dumping your Discs allows you to: play them on a Wii emulator (namely Dolphin), 1. Read the Disclaimer then press A. 1. Select Yes to enable Checksum Calculations. 1. Select either USB or Front SD depending on which device you want to use for the dumping process. - - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. + - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. 1. Press A to continue. 1. Select No on the screen that asks you to download redump.org DAT files. 1. Insert your disc then press A. 1. Go [on this page](https://wiki.dolphin-emu.org/index.php?title=Category:Dual_Layer_Disc_games) to see if your disc is dual-layered. 1. Set everything to match the following: - - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) - - Chunk Size: `Max` - - New device per chunk: `No` + - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) + - Chunk Size: `Max` + - New device per chunk: `No` 1. If you want to dump multiple discs, select Yes to remember your settings. If not, select No. ?> Be prepared to wait a while. The dumping process can take 30 minutes to 1 hour depending on your SD Card's speeds. diff --git a/translations/vi_VN/docs/troubleshooting/fix-errcode-112-1037.md b/translations/vi_VN/docs/troubleshooting/fix-errcode-112-1037.md index 98b8f454c..bce0e7fae 100644 --- a/translations/vi_VN/docs/troubleshooting/fix-errcode-112-1037.md +++ b/translations/vi_VN/docs/troubleshooting/fix-errcode-112-1037.md @@ -25,14 +25,14 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a command prompt window. 1. Use the following command: `cd `. - - Example: cd C:\Users\username\Downloads. + - Example: cd C:\Users\username\Downloads. 1. Use the following command: `py -3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. @@ -45,15 +45,15 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a Terminal window. 1. Use the following command: `cd `. - - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. - - On Linux, the most common place to find your downloaded files is /home/username/Downloads. + - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. + - On Linux, the most common place to find your downloaded files is /home/username/Downloads. 1. Use the following command: `python3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. diff --git a/translations/vi_VN/docs/user-guide/cbhc/browser-exploit.md b/translations/vi_VN/docs/user-guide/cbhc/browser-exploit.md index 6e1553c47..aa6e836d9 100644 --- a/translations/vi_VN/docs/user-guide/cbhc/browser-exploit.md +++ b/translations/vi_VN/docs/user-guide/cbhc/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/vi_VN/docs/user-guide/cbhc/nand-backup.md b/translations/vi_VN/docs/user-guide/cbhc/nand-backup.md index e24bdaf1b..e324b7a81 100644 --- a/translations/vi_VN/docs/user-guide/cbhc/nand-backup.md +++ b/translations/vi_VN/docs/user-guide/cbhc/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/vi_VN/docs/user-guide/haxchi/browser-exploit.md b/translations/vi_VN/docs/user-guide/haxchi/browser-exploit.md index 826e038f3..8853ba483 100644 --- a/translations/vi_VN/docs/user-guide/haxchi/browser-exploit.md +++ b/translations/vi_VN/docs/user-guide/haxchi/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/vi_VN/docs/user-guide/haxchi/nand-backup.md b/translations/vi_VN/docs/user-guide/haxchi/nand-backup.md index 75200207a..9d6d642ad 100644 --- a/translations/vi_VN/docs/user-guide/haxchi/nand-backup.md +++ b/translations/vi_VN/docs/user-guide/haxchi/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/vi_VN/docs/user-guide/mocha/indexiine/browser-exploit.md b/translations/vi_VN/docs/user-guide/mocha/indexiine/browser-exploit.md index 83505773d..c14364eb9 100644 --- a/translations/vi_VN/docs/user-guide/mocha/indexiine/browser-exploit.md +++ b/translations/vi_VN/docs/user-guide/mocha/indexiine/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/vi_VN/docs/user-guide/mocha/indexiine/browser-modding.md b/translations/vi_VN/docs/user-guide/mocha/indexiine/browser-modding.md index 2aa249f4c..2bdfe4a37 100644 --- a/translations/vi_VN/docs/user-guide/mocha/indexiine/browser-modding.md +++ b/translations/vi_VN/docs/user-guide/mocha/indexiine/browser-modding.md @@ -12,7 +12,7 @@ Now that you have your NAND backup in case anything goes wrong later, you can in 1. Turn on your Wii U. 1. Launch the internet browser and open the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. 1. Navigate through the Homebrew Launcher and launch the `Indexiine Installer` app. 1. Press the A button to install Indexiine. 1. When the process completed, close the Homebrew Launcher to get back to your Wii U menu. diff --git a/translations/vi_VN/docs/user-guide/mocha/indexiine/nand-backup.md b/translations/vi_VN/docs/user-guide/mocha/indexiine/nand-backup.md index b0809c71c..88814cff8 100644 --- a/translations/vi_VN/docs/user-guide/mocha/indexiine/nand-backup.md +++ b/translations/vi_VN/docs/user-guide/mocha/indexiine/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/vi_VN/docs/user-guide/mocha/online-exploit/browser-exploit.md b/translations/vi_VN/docs/user-guide/mocha/online-exploit/browser-exploit.md index 8cbf2c754..30b7c94c5 100644 --- a/translations/vi_VN/docs/user-guide/mocha/online-exploit/browser-exploit.md +++ b/translations/vi_VN/docs/user-guide/mocha/online-exploit/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/vi_VN/docs/user-guide/mocha/online-exploit/nand-backup.md b/translations/vi_VN/docs/user-guide/mocha/online-exploit/nand-backup.md index 6513b4f51..adcbfaf3a 100644 --- a/translations/vi_VN/docs/user-guide/mocha/online-exploit/nand-backup.md +++ b/translations/vi_VN/docs/user-guide/mocha/online-exploit/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/vi_VN/docs/vwii/vwii-modding.md b/translations/vi_VN/docs/vwii/vwii-modding.md index c301b7b7f..64bdca1af 100644 --- a/translations/vi_VN/docs/vwii/vwii-modding.md +++ b/translations/vi_VN/docs/vwii/vwii-modding.md @@ -35,11 +35,11 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch the `Wii U NAND Dumper` application. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **optional** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **optional** + - Dump SLC: **optional** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **optional** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slccmpt.bin`, `otp.bin` and if you chose to go with a full backup, `seeprom.bin`, `slc.bin`, and `every mlc.bin.part` file to your computer. @@ -51,10 +51,10 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `A` to backup the Mii Channel and inject the Hackmii Installer then wait until it says Successfully injected wuphax!. - - You will be taken back to the Wii U Menu after a few seconds. + - You will be taken back to the Wii U Menu after a few seconds. 1. Launch vWii (the Wii Menu icon). 1. Launch the vWii Mii Channel. - - If Wuphax has successfully been injected, you will now see the scam warning screen. + - If Wuphax has successfully been injected, you will now see the scam warning screen. 1. Wait until you see `Press 1 to continue` and then press the `1` button. 1. Select `continue`, Install The Homebrew Channel and `Yes, continue`. 1. If The Homebrew Channel has successfully been installed, select `continue` and then `exit`. @@ -62,8 +62,8 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `B` to restore the Mii Channel then wait until it says Mii Channel restored!. - - You will be taken back to the Wii U Menu after a few seconds. - - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). + - You will be taken back to the Wii U Menu after a few seconds. + - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). ### Installing cIOSes @@ -75,19 +75,19 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch The Homebrew Channel. 1. Launch d2x cIOS Installer. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `56` - - Select cIOS slot: `249` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `56` + - Select cIOS slot: `249` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `57` - - Select cIOS slot: `250` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `57` + - Select cIOS slot: `250` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `58` - - Select cIOS slot: `251` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `58` + - Select cIOS slot: `251` 1. Press the `A` button to install. 1. Press the `B` button to exit. diff --git a/translations/zh_CN/docs/extras/block-updates.md b/translations/zh_CN/docs/extras/block-updates.md index 43756e9fd..df41db4c8 100644 --- a/translations/zh_CN/docs/extras/block-updates.md +++ b/translations/zh_CN/docs/extras/block-updates.md @@ -30,8 +30,8 @@ 1. Plug the SD Card into your Wii U console and power it on. 1. 进入的 Wii U 的系统设置，并移动至`互联网（Internet） > 连接至互联网（Connect to the Internet） > 接入点列表（Connection List） >` `你的 WiFi 接入点（Your WiFi connection） > 更改设置（Change Settings） > DNS` 然后设置选项为 `不自动获取（Do not auto-obtain）`。 1. 你会被分别要求输入一个首先 DNS 和备用 DNS。 输入以下 IP 地址： - - 首选 DNS：168.235.092.108 - - 备用DNS：081.004.127.020 DNS 屏蔽 + - 首选 DNS：168.235.092.108 + - 备用DNS：081.004.127.020 DNS 屏蔽 1. 点击确认。 1. You are now blocking updates. 如果你想要启动 eShop，则你需要在 Homebrew Launcher 里运行 NNUPatcher 程序后再启动 eShop。 diff --git a/translations/zh_CN/docs/extras/configurable-payload.md b/translations/zh_CN/docs/extras/configurable-payload.md index efc86f069..712bcfd82 100644 --- a/translations/zh_CN/docs/extras/configurable-payload.md +++ b/translations/zh_CN/docs/extras/configurable-payload.md @@ -19,4 +19,4 @@ 1. 解压 `Configurable_Payload.zip` 到你的 SD 卡中的根目录中。 如果弹出了需要覆盖文件的提示，请选择覆盖。 1. 将 SD 卡插入 Wii U，然后启动 Wii U 并打开 Wii U 的浏览器，然后访问 `wiiuexploit.xyz` 网站。 1. 点击 `Run Homebrew Launcher!`。 如果一切正常，系统将会自动回到 Wii U 主菜单。 Mocha 现在已被启用，且你可以使用你早前安装的 Homebrew Launcher Channel。 - - 如果你的 Wii U 卡住不动或白屏了，请等一会。 如果什么都没有发生，那就重启主机后[重置浏览器保存的数据](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history)，然后再来一次。 + - 如果你的 Wii U 卡住不动或白屏了，请等一会。 如果什么都没有发生，那就重启主机后[重置浏览器保存的数据](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history)，然后再来一次。 diff --git a/translations/zh_CN/docs/extras/dump-games.md b/translations/zh_CN/docs/extras/dump-games.md index d832a0177..7ca4a8da7 100644 --- a/translations/zh_CN/docs/extras/dump-games.md +++ b/translations/zh_CN/docs/extras/dump-games.md @@ -103,11 +103,11 @@ 1. 插入你的 USB 设备。 你的 Wii U 会提示你格式化它。 点击 No! 取消它。 1. 打开 Homebrew Launcher 并启动 MochaFAT32 程序。 1. 在配置菜单中，设置以下选项： - - Config view mode: default - - Skip this menu on launch: on - - Don't relaunch OS: off - - Launch System Menu: on - - RedNAND: off + - Config view mode: default + - Skip this menu on launch: on + - Don't relaunch OS: off + - Launch System Menu: on + - RedNAND: off 1. 你的设备将与 USB 设备一并加载 Wii U 菜单，并以 USB 设备代替 SD 卡。 1. 启动 Homebrew Launcher 并启动 disc2app 应用。 1. 弹出任何已插入的游戏光盘，然后按下 A 键开始导出进程。 diff --git a/translations/zh_CN/docs/extras/dump-wii-games.md b/translations/zh_CN/docs/extras/dump-wii-games.md index 7d7c69cc7..d0d10573a 100644 --- a/translations/zh_CN/docs/extras/dump-wii-games.md +++ b/translations/zh_CN/docs/extras/dump-wii-games.md @@ -24,15 +24,15 @@ 1. 阅读免责声明，然后按下 A 键。 1. 选择 Yes 来启用校验计算。 1. 选择导出过程中你想使用的 USB 设备或 SD 卡。 - - 请注意，你选择的设备需要格式化为 FAT32 或 NTFS。 + - 请注意，你选择的设备需要格式化为 FAT32 或 NTFS。 1. 按 A 继续。 1. 如果屏幕上提示是否从 redump.org 上下载 DAT 文件，选择 No。 1. 插入你的光盘，然后按下 A 键。 1. 在[这个页面](https://wiki.dolphin-emu.org/index.php?title=Category:Dual_Layer_Disc_games)中可以检查你的光盘是否是双层的。 1. 设定以下选项： - - Dual Layer: `Yes/No`（如果你的光盘是双层的，请选择 `Yes`） - - Chunk Size: `Max` - - New device per chunk: `No` + - Dual Layer: `Yes/No`（如果你的光盘是双层的，请选择 `Yes`） + - Chunk Size: `Max` + - New device per chunk: `No` 1. 如果你想要导出多个光盘，请选择 Yes 来保存你的设置。 反之，请选择 No。 ?> 请等待一段时间。 导出过程可能要 30 分钟至 1 小时，这取决于你的 SD 卡速度。 diff --git a/translations/zh_CN/docs/troubleshooting/fix-errcode-112-1037.md b/translations/zh_CN/docs/troubleshooting/fix-errcode-112-1037.md index 4191b22ca..2715e5a15 100644 --- a/translations/zh_CN/docs/troubleshooting/fix-errcode-112-1037.md +++ b/translations/zh_CN/docs/troubleshooting/fix-errcode-112-1037.md @@ -25,14 +25,14 @@ 1. 返回 Wii U 主菜单。 1. 打开一个命令提示符窗口。 1. 使用以下命令移动到 wupclient.py 的目录下： `cd `。 - - 例子：cd C:\Users\<用户名>\Downloads。 + - 例子：cd C:\Users\<用户名>\Downloads。 1. 使用以下命令：`py -3 -i wupclient.py`。 1. 输入你的 Wii U 的 IP 地址。 - - 你不知道？ 请读[这个](find-wiiu-ip-address)。 + - 你不知道？ 请读[这个](find-wiiu-ip-address)。 1. 请使用对应你主机区域的命令： - - 日版：w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644)。 - - 美版：w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644)。 - - 欧版：w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644)。 + - 日版：w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644)。 + - 美版：w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644)。 + - 欧版：w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644)。 1. 如果输入正确，你应该会看到命令行输出以下内容： `chmod returned 0x0`。 1. 这个错误代码现在应该没了。 @@ -45,15 +45,15 @@ 1. 返回 Wii U 主菜单。 1. 打开终端窗口。 1. 使用以下命令移动到 wupclient.py 的目录下： `cd `。 - - 在 macOS 上，下载的文件一般都在 /Users/<用户名>/Downloads目录下。 - - 在 Linux 上，下载的文件一般都在 /home/<用户名>/Downloads目录下。 + - 在 macOS 上，下载的文件一般都在 /Users/<用户名>/Downloads目录下。 + - 在 Linux 上，下载的文件一般都在 /home/<用户名>/Downloads目录下。 1. 使用以下命令：`python3 -i wupclient.py`。 1. 输入你的 Wii U 的 IP 地址。 - - 你不知道？ 请读[这个](find-wiiu-ip-address)。 + - 你不知道？ 请读[这个](find-wiiu-ip-address)。 1. 请使用对应你主机区域的命令： - - 日版：w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644)。 - - 美版：w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644)。 - - 欧版：w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644)。 + - 日版：w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644)。 + - 美版：w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644)。 + - 欧版：w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644)。 1. 如果输入正确，你应该会看到命令行输出以下内容： `chmod returned 0x0`。 1. 这个错误代码现在应该没了。 diff --git a/translations/zh_CN/docs/user-guide/cbhc/browser-exploit.md b/translations/zh_CN/docs/user-guide/cbhc/browser-exploit.md index aa84db8e5..c5b9ef879 100644 --- a/translations/zh_CN/docs/user-guide/cbhc/browser-exploit.md +++ b/translations/zh_CN/docs/user-guide/cbhc/browser-exploit.md @@ -9,4 +9,4 @@ 1. 把 SD 卡从电脑中弹出并插入 Wii U 主机。 1. 启动 Wii U 的浏览器，然后访问 `wiiuexploit.xyz` 网站。 1. 点击 `Run Homebrew Launcher!`。 然后你的主机应该就启动到 Homebrew Launcher 了。 - - 如果你的 Wii U 卡住不动或白屏了，请等一会。 如果什么都没有发生，那就重启主机后[重置浏览器保存的数据](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history)，然后再来一次。 \ No newline at end of file + - 如果你的 Wii U 卡住不动或白屏了，请等一会。 如果什么都没有发生，那就重启主机后[重置浏览器保存的数据](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history)，然后再来一次。 \ No newline at end of file diff --git a/translations/zh_CN/docs/user-guide/cbhc/nand-backup.md b/translations/zh_CN/docs/user-guide/cbhc/nand-backup.md index b6b628399..791731478 100644 --- a/translations/zh_CN/docs/user-guide/cbhc/nand-backup.md +++ b/translations/zh_CN/docs/user-guide/cbhc/nand-backup.md @@ -12,11 +12,11 @@ 1. 移动 Homebrew Launcher 至 `Wii U NAND Dumper` 程序并启动。 1. 使用 Wii U 游戏手柄上的十字键来配置以下内容： - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **可选** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **可选** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. 按下 A 键启动导出的进程。 1. 当完成后，将 Wii U 关机，然后把 SD 卡从 Wii U 上拔出并插入电脑。 1. 确认你的内存卡中有以下文件：`slc.bin`、`slccmpt.bin`、`seeprom.bin`、`otp.bin` 然后将其复制到电脑上。 若你选择了全部备份，则你还需要复制 `所有的 mlc.bin.part` 文件到电脑上。 diff --git a/translations/zh_CN/docs/user-guide/haxchi/browser-exploit.md b/translations/zh_CN/docs/user-guide/haxchi/browser-exploit.md index 1bb13e91a..b20d88373 100644 --- a/translations/zh_CN/docs/user-guide/haxchi/browser-exploit.md +++ b/translations/zh_CN/docs/user-guide/haxchi/browser-exploit.md @@ -9,4 +9,4 @@ 1. 把 SD 卡从电脑中弹出，并插入 Wii U 主机。 1. 启动 Wii U 的浏览器，打开 `wiiuexploit.xyz` 。 1. 点击 `Run Homebrew Launcher!`。 主机将会启动 Homebrew Launcher。 - - 如果你的 Wii U 卡住不动或白屏了，请等一会。 如果什么都没有发生，那就重启主机后[重置浏览器保存的数据](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history)，然后再来一次。 \ No newline at end of file + - 如果你的 Wii U 卡住不动或白屏了，请等一会。 如果什么都没有发生，那就重启主机后[重置浏览器保存的数据](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history)，然后再来一次。 \ No newline at end of file diff --git a/translations/zh_CN/docs/user-guide/haxchi/nand-backup.md b/translations/zh_CN/docs/user-guide/haxchi/nand-backup.md index cf95e996c..350a3ef24 100644 --- a/translations/zh_CN/docs/user-guide/haxchi/nand-backup.md +++ b/translations/zh_CN/docs/user-guide/haxchi/nand-backup.md @@ -12,11 +12,11 @@ 1. 移动 Homebrew Launcher 至 `Wii U NAND Dumper` 程序并启动。 1. 使用 Wii U 游戏手柄上的十字键来配置以下内容： - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **可选** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **可选** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. 按下 A 键启动导出的进程。 1. 当完成后，将 Wii U 关机，然后把 SD 卡从 Wii U 上拔出并插入电脑。 1. 确认你的内存卡中有以下文件：`slc.bin`、`slccmpt.bin`、`seeprom.bin`、`otp.bin` 然后将其复制到电脑上。 若你选择了全部备份，则你还需要复制 `所有的 mlc.bin.part` 文件到电脑上。 diff --git a/translations/zh_CN/docs/user-guide/mocha/indexiine/browser-exploit.md b/translations/zh_CN/docs/user-guide/mocha/indexiine/browser-exploit.md index 80e65e4ff..2dfda2394 100644 --- a/translations/zh_CN/docs/user-guide/mocha/indexiine/browser-exploit.md +++ b/translations/zh_CN/docs/user-guide/mocha/indexiine/browser-exploit.md @@ -9,4 +9,4 @@ 1. 把 SD 卡从电脑中弹出并插入 Wii U 主机。 1. 启动 Wii U 的浏览器，然后访问 `wiiuexploit.xyz` 网站。 1. 点击 `Run Homebrew Launcher!`。 然后你的主机应该就启动到 Homebrew Launcher 了。 - - 如果你的 Wii U 卡住不动或白屏了，请等一会。 如果什么都没有发生，那就重启主机后[重置浏览器保存的数据](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history)，然后再来一次。 \ No newline at end of file + - 如果你的 Wii U 卡住不动或白屏了，请等一会。 如果什么都没有发生，那就重启主机后[重置浏览器保存的数据](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history)，然后再来一次。 \ No newline at end of file diff --git a/translations/zh_CN/docs/user-guide/mocha/indexiine/browser-modding.md b/translations/zh_CN/docs/user-guide/mocha/indexiine/browser-modding.md index 63ffec5e8..0be908e68 100644 --- a/translations/zh_CN/docs/user-guide/mocha/indexiine/browser-modding.md +++ b/translations/zh_CN/docs/user-guide/mocha/indexiine/browser-modding.md @@ -12,7 +12,7 @@ 1. 打开你的 Wii U。 1. 启动 Wii U 的浏览器，打开 `wiiuexploit.xyz` 。 1. 点击 `Run Homebrew Launcher!`。 然后你的主机应该就启动到 Homebrew Launcher 了。 - - 如果你的 Wii U 卡住不动或白屏了，请等一会。 如果什么都没有发生，那就重启主机后[重置浏览器保存的数据](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history)，然后再来一次。 + - 如果你的 Wii U 卡住不动或白屏了，请等一会。 如果什么都没有发生，那就重启主机后[重置浏览器保存的数据](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history)，然后再来一次。 1. 移动 Homebrew Launcher 至 `Indexiine Installer` 程序并启动。 1. 按下 A 键安装 Indexiine。 1. 当进程完成后，请关闭 Homebrew Launcher 来返回你的 Wii U 主菜单。 diff --git a/translations/zh_CN/docs/user-guide/mocha/indexiine/nand-backup.md b/translations/zh_CN/docs/user-guide/mocha/indexiine/nand-backup.md index 3cf7914fa..ffbaafcc8 100644 --- a/translations/zh_CN/docs/user-guide/mocha/indexiine/nand-backup.md +++ b/translations/zh_CN/docs/user-guide/mocha/indexiine/nand-backup.md @@ -12,11 +12,11 @@ 1. 移动 Homebrew Launcher 至 `Wii U NAND Dumper` 程序并启动。 1. 使用 Wii U 游戏手柄上的十字键来配置以下内容： - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **可选** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **可选** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. 按下 A 键启动导出的进程。 1. 当完成后，将 Wii U 关机，然后把 SD 卡从 Wii U 上拔出并插入电脑。 1. 确认你的内存卡中有以下文件：`slc.bin`、`slccmpt.bin`、`seeprom.bin`、`otp.bin` 然后将其复制到电脑上。 若你选择了全部备份，则你还需要复制 `所有的 mlc.bin.part` 文件到电脑上。 diff --git a/translations/zh_CN/docs/user-guide/mocha/online-exploit/browser-exploit.md b/translations/zh_CN/docs/user-guide/mocha/online-exploit/browser-exploit.md index b393ab210..43a4027f0 100644 --- a/translations/zh_CN/docs/user-guide/mocha/online-exploit/browser-exploit.md +++ b/translations/zh_CN/docs/user-guide/mocha/online-exploit/browser-exploit.md @@ -9,4 +9,4 @@ 1. 把 SD 卡从电脑中弹出并插入 Wii U 主机。 1. 启动 Wii U 的浏览器，然后访问 `wiiuexploit.xyz` 网站。 1. 点击 `Run Homebrew Launcher!`。 然后你的主机应该就启动到 Homebrew Launcher 了。 - - 如果你的 Wii U 卡住不动或白屏了，请等一会。 如果什么都没有发生，那就重启主机后[重置浏览器保存的数据](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history)，然后再来一次。 \ No newline at end of file + - 如果你的 Wii U 卡住不动或白屏了，请等一会。 如果什么都没有发生，那就重启主机后[重置浏览器保存的数据](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history)，然后再来一次。 \ No newline at end of file diff --git a/translations/zh_CN/docs/user-guide/mocha/online-exploit/nand-backup.md b/translations/zh_CN/docs/user-guide/mocha/online-exploit/nand-backup.md index 58d0c9c0f..c973d7b1d 100644 --- a/translations/zh_CN/docs/user-guide/mocha/online-exploit/nand-backup.md +++ b/translations/zh_CN/docs/user-guide/mocha/online-exploit/nand-backup.md @@ -12,11 +12,11 @@ 1. 移动 Homebrew Launcher 至 `Wii U NAND Dumper` 程序并启动。 1. 使用 Wii U 游戏手柄上的十字键来配置以下内容： - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **可选** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **可选** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. 按下 A 键启动导出的进程。 1. 当完成后，将 Wii U 关机，然后把 SD 卡从 Wii U 上拔出并插入电脑。 1. 确认你的内存卡中有以下文件：`slc.bin`、`slccmpt.bin`、`seeprom.bin`、`otp.bin` 然后将其复制到电脑上。 若你选择了全部备份，则你还需要复制 `所有的 mlc.bin.part` 文件到电脑上。 diff --git a/translations/zh_CN/docs/vwii/vwii-modding.md b/translations/zh_CN/docs/vwii/vwii-modding.md index ea7cd5985..4986f1ada 100644 --- a/translations/zh_CN/docs/vwii/vwii-modding.md +++ b/translations/zh_CN/docs/vwii/vwii-modding.md @@ -35,11 +35,11 @@ 1. 启动 [Homebrew Launcher](vwii/browser-exploit)。 1. 启动 `Wii U NAND Dumper`。 1. 使用 Wii U 游戏手柄上的十字键来配置以下内容： - - Dump SLC: **可选** - - Dump SLCCMPT: **yes** - - Dump MLC: **可选** - - Dump OTP: **yes** - - Dump SEEPROM: **可选** + - Dump SLC: **可选** + - Dump SLCCMPT: **yes** + - Dump MLC: **可选** + - Dump OTP: **yes** + - Dump SEEPROM: **可选** 1. 按下 A 键启动导出的进程。 1. 当完成后，将 Wii U 关机，然后把 SD 卡从 Wii U 上拔出并插入电脑。 1. 为了确保你不会丢掉某些文件，请复制 `slccmpt.bin` 和 `otp.bin` 到你的电脑上，如果你选择全部备份则还要复制 `seeprom.bin`、`slc.bin` 和`所有的 mlc.bin.part` 文件到电脑上。 @@ -51,10 +51,10 @@ 1. 启动 [Homebrew Launcher](vwii/browser-exploit)。 1. 启动 Wuphax。 1. 按下 `A` 键然后等一会来备份 Mii Channel 并注入 Hackmii Installer，直到屏幕上提示 Successfully injected wuphax!。 - - 你将会在几秒后回到 Wii U 主菜单。 + - 你将会在几秒后回到 Wii U 主菜单。 1. 启动 vWii（Wii 菜单图标）。 1. 启动 vWii Mii Channel。 - - 如果 Wuphax 被成功注入，此时你将会看到警告提示。 + - 如果 Wuphax 被成功注入，此时你将会看到警告提示。 1. 等一会，直到你看到 `Press 1 to continue` 后，按下 `1` 键。 1. 选择 `continue`，然后选择 Install The Homebrew Channel 再然后选择 `Yes, continue`。 1. 如果 Homebrew Channel 被顺利安装，请选择 `continue`，然后选择 `exit`。 @@ -62,8 +62,8 @@ 1. 启动 [Homebrew Launcher](vwii/browser-exploit)。 1. 启动 Wuphax。 1. 按下 `B` 键后等一会来还原 Mii Channel，直到它提示 Mii Channel restored!。 - - 你将会在几秒后回到 Wii U 主菜单。 - - 如果由于一些原因你无法恢复备份，则你需要[重新安装你的 Mii Channel](recover-vwii-ioses-channels)。 + - 你将会在几秒后回到 Wii U 主菜单。 + - 如果由于一些原因你无法恢复备份，则你需要[重新安装你的 Mii Channel](recover-vwii-ioses-channels)。 ### 安装 cIOS @@ -75,19 +75,19 @@ 1. 启动 Homebrew Channel。 1. 启动 d2x cIOS Installer。 1. 设定以下选项： - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `56` - - Select cIOS slot: `249` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `56` + - Select cIOS slot: `249` 1. 按下 `A` 键来安装。 1. 设定以下选项： - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `57` - - Select cIOS slot: `250` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `57` + - Select cIOS slot: `250` 1. 按下 `A` 键来安装。 1. 设定以下选项： - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `58` - - Select cIOS slot: `251` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `58` + - Select cIOS slot: `251` 1. 按下 `A` 键来安装。 1. 按下 `B` 键来退出。 diff --git a/translations/zh_TW/docs/extras/block-updates.md b/translations/zh_TW/docs/extras/block-updates.md index 138f56793..6d1a63a79 100644 --- a/translations/zh_TW/docs/extras/block-updates.md +++ b/translations/zh_TW/docs/extras/block-updates.md @@ -30,8 +30,8 @@ Currently, two ways exist to block updates on the Wii U system: 1. Plug the SD Card into your Wii U console and power it on. 1. Enter the Wii U's system settings and navigate to `Internet > Connect to the Internet > Connection List >` `Your WiFi connection > Change Settings > DNS` and set the option to `Do not auto-obtain`. 1. You will be asked to input a primary and secondary DNS. Enter the following IP addresses: - - Primary DNS: 168.235.092.108 - - Secondary DNS: 081.004.127.020 DNS Block + - Primary DNS: 168.235.092.108 + - Secondary DNS: 081.004.127.020 DNS Block 1. Click on confirm. 1. You are now blocking updates. In order to access the eShop, run the NNUPatcher app from the Homebrew Launcher before launching the eShop. diff --git a/translations/zh_TW/docs/extras/configurable-payload.md b/translations/zh_TW/docs/extras/configurable-payload.md index 68e33baea..3068e9e1c 100644 --- a/translations/zh_TW/docs/extras/configurable-payload.md +++ b/translations/zh_TW/docs/extras/configurable-payload.md @@ -19,4 +19,4 @@ This payload is configurable, similar to Haxchi's configuration. This could be v 1. Extract the `Configurable_Payload.zip` file to the root of your SD Card. If it prompts you to overwrite the files on your SD Card, do so. 1. Place the SD Card into your Wii U and launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. If everything has been done correctly, you should be taken back to the Wii U Menu. Mocha has now been enabled and you can use the Homebrew Launcher Channel you installed earlier. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. diff --git a/translations/zh_TW/docs/extras/dump-games.md b/translations/zh_TW/docs/extras/dump-games.md index 63c7044ae..d7b48a17a 100644 --- a/translations/zh_TW/docs/extras/dump-games.md +++ b/translations/zh_TW/docs/extras/dump-games.md @@ -103,11 +103,11 @@ Dumping your Discs allows you to install a copy of your game to the system NAND/ 1. Plug in your USB device. The Wii U will ask you format it. Cancel with No! 1. Launch the Homebrew Launcher and start the MochaFAT32 app. 1. In the configuration menu, set the following settings: - - Config view mode: default - - Skip this menu on launch: on - - Don't relaunch OS: off - - Launch System Menu: on - - RedNAND: off + - Config view mode: default + - Skip this menu on launch: on + - Don't relaunch OS: off + - Launch System Menu: on + - RedNAND: off 1. Your console will load the Wii U menu with your USB device now replacing the SD Card. 1. Launch the Homebrew Launcher and open the disc2app app. 1. Eject any inserted game disc and press the A button to begin the dumping process. diff --git a/translations/zh_TW/docs/extras/dump-wii-games.md b/translations/zh_TW/docs/extras/dump-wii-games.md index db3692a09..1d98d4209 100644 --- a/translations/zh_TW/docs/extras/dump-wii-games.md +++ b/translations/zh_TW/docs/extras/dump-wii-games.md @@ -24,15 +24,15 @@ Dumping your Discs allows you to: play them on a Wii emulator (namely Dolphin), 1. Read the Disclaimer then press A. 1. Select Yes to enable Checksum Calculations. 1. Select either USB or Front SD depending on which device you want to use for the dumping process. - - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. + - Please note that the device you will choose needs to be formatted either in FAT32 or NTFS. 1. Press A to continue. 1. Select No on the screen that asks you to download redump.org DAT files. 1. Insert your disc then press A. 1. Go [on this page](https://wiki.dolphin-emu.org/index.php?title=Category:Dual_Layer_Disc_games) to see if your disc is dual-layered. 1. Set everything to match the following: - - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) - - Chunk Size: `Max` - - New device per chunk: `No` + - Dual Layer: `Yes/No` (Select `Yes` if your game's disc is dual-layered) + - Chunk Size: `Max` + - New device per chunk: `No` 1. If you want to dump multiple discs, select Yes to remember your settings. If not, select No. ?> Be prepared to wait a while. The dumping process can take 30 minutes to 1 hour depending on your SD Card's speeds. diff --git a/translations/zh_TW/docs/troubleshooting/fix-errcode-112-1037.md b/translations/zh_TW/docs/troubleshooting/fix-errcode-112-1037.md index 98b8f454c..bce0e7fae 100644 --- a/translations/zh_TW/docs/troubleshooting/fix-errcode-112-1037.md +++ b/translations/zh_TW/docs/troubleshooting/fix-errcode-112-1037.md @@ -25,14 +25,14 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a command prompt window. 1. Use the following command: `cd `. - - Example: cd C:\Users\username\Downloads. + - Example: cd C:\Users\username\Downloads. 1. Use the following command: `py -3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. @@ -45,15 +45,15 @@ This page will guide you through the process of fixing the error code 112-1037. 1. Go back to the Wii U Menu. 1. Open up a Terminal window. 1. Use the following command: `cd `. - - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. - - On Linux, the most common place to find your downloaded files is /home/username/Downloads. + - On macOS, the most common place to find your downloaded files is /Users/username/Downloads. + - On Linux, the most common place to find your downloaded files is /home/username/Downloads. 1. Use the following command: `python3 -i wupclient.py`. 1. Enter the IP address of your Wii U. - - Don't know how to find it? Read [this](find-wiiu-ip-address). + - Don't know how to find it? Read [this](find-wiiu-ip-address). 1. Use the appropriate command depending on the region of your console: - - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). - - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). - - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). + - JPN: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001200a/content/pages/index.html", 0x644). + - USA: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001210a/content/pages/index.html", 0x644). + - EUR: w.chmod("/vol/storage_mlc01/sys/title/00050030/1001220a/content/pages/index.html", 0x644). 1. If the command worked, you will get the following response: `chmod returned 0x0`. 1. The error code should now be gone. diff --git a/translations/zh_TW/docs/user-guide/cbhc/browser-exploit.md b/translations/zh_TW/docs/user-guide/cbhc/browser-exploit.md index 6e1553c47..aa6e836d9 100644 --- a/translations/zh_TW/docs/user-guide/cbhc/browser-exploit.md +++ b/translations/zh_TW/docs/user-guide/cbhc/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/zh_TW/docs/user-guide/cbhc/nand-backup.md b/translations/zh_TW/docs/user-guide/cbhc/nand-backup.md index e24bdaf1b..e324b7a81 100644 --- a/translations/zh_TW/docs/user-guide/cbhc/nand-backup.md +++ b/translations/zh_TW/docs/user-guide/cbhc/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/zh_TW/docs/user-guide/haxchi/browser-exploit.md b/translations/zh_TW/docs/user-guide/haxchi/browser-exploit.md index 826e038f3..8853ba483 100644 --- a/translations/zh_TW/docs/user-guide/haxchi/browser-exploit.md +++ b/translations/zh_TW/docs/user-guide/haxchi/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/zh_TW/docs/user-guide/haxchi/nand-backup.md b/translations/zh_TW/docs/user-guide/haxchi/nand-backup.md index 75200207a..9d6d642ad 100644 --- a/translations/zh_TW/docs/user-guide/haxchi/nand-backup.md +++ b/translations/zh_TW/docs/user-guide/haxchi/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/zh_TW/docs/user-guide/mocha/indexiine/browser-exploit.md b/translations/zh_TW/docs/user-guide/mocha/indexiine/browser-exploit.md index 83505773d..c14364eb9 100644 --- a/translations/zh_TW/docs/user-guide/mocha/indexiine/browser-exploit.md +++ b/translations/zh_TW/docs/user-guide/mocha/indexiine/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/zh_TW/docs/user-guide/mocha/indexiine/browser-modding.md b/translations/zh_TW/docs/user-guide/mocha/indexiine/browser-modding.md index 2aa249f4c..2bdfe4a37 100644 --- a/translations/zh_TW/docs/user-guide/mocha/indexiine/browser-modding.md +++ b/translations/zh_TW/docs/user-guide/mocha/indexiine/browser-modding.md @@ -12,7 +12,7 @@ Now that you have your NAND backup in case anything goes wrong later, you can in 1. Turn on your Wii U. 1. Launch the internet browser and open the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. 1. Navigate through the Homebrew Launcher and launch the `Indexiine Installer` app. 1. Press the A button to install Indexiine. 1. When the process completed, close the Homebrew Launcher to get back to your Wii U menu. diff --git a/translations/zh_TW/docs/user-guide/mocha/indexiine/nand-backup.md b/translations/zh_TW/docs/user-guide/mocha/indexiine/nand-backup.md index b0809c71c..88814cff8 100644 --- a/translations/zh_TW/docs/user-guide/mocha/indexiine/nand-backup.md +++ b/translations/zh_TW/docs/user-guide/mocha/indexiine/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/zh_TW/docs/user-guide/mocha/online-exploit/browser-exploit.md b/translations/zh_TW/docs/user-guide/mocha/online-exploit/browser-exploit.md index 8cbf2c754..30b7c94c5 100644 --- a/translations/zh_TW/docs/user-guide/mocha/online-exploit/browser-exploit.md +++ b/translations/zh_TW/docs/user-guide/mocha/online-exploit/browser-exploit.md @@ -9,4 +9,4 @@ To install CFW, we first need to launch the Homebrew Launcher through the browse 1. Take the SD Card out of your computer and plug it into your Wii U console. 1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`. 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. - - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file + - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. \ No newline at end of file diff --git a/translations/zh_TW/docs/user-guide/mocha/online-exploit/nand-backup.md b/translations/zh_TW/docs/user-guide/mocha/online-exploit/nand-backup.md index 6513b4f51..adcbfaf3a 100644 --- a/translations/zh_TW/docs/user-guide/mocha/online-exploit/nand-backup.md +++ b/translations/zh_TW/docs/user-guide/mocha/online-exploit/nand-backup.md @@ -12,11 +12,11 @@ In case anything should go wrong in the later process and your Wii U ends up bri 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** + - Dump SLC: **yes** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **yes** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. diff --git a/translations/zh_TW/docs/vwii/vwii-modding.md b/translations/zh_TW/docs/vwii/vwii-modding.md index c301b7b7f..64bdca1af 100644 --- a/translations/zh_TW/docs/vwii/vwii-modding.md +++ b/translations/zh_TW/docs/vwii/vwii-modding.md @@ -35,11 +35,11 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch the `Wii U NAND Dumper` application. 1. Use the Wii U GamePad's D-Pad to enter the following configuration: - - Dump SLC: **optional** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **optional** + - Dump SLC: **optional** + - Dump SLCCMPT: **yes** + - Dump MLC: **optional** + - Dump OTP: **yes** + - Dump SEEPROM: **optional** 1. Press the A button to start the dumping process. 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. 1. To make sure you don't lose the files, copy the `slccmpt.bin`, `otp.bin` and if you chose to go with a full backup, `seeprom.bin`, `slc.bin`, and `every mlc.bin.part` file to your computer. @@ -51,10 +51,10 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `A` to backup the Mii Channel and inject the Hackmii Installer then wait until it says Successfully injected wuphax!. - - You will be taken back to the Wii U Menu after a few seconds. + - You will be taken back to the Wii U Menu after a few seconds. 1. Launch vWii (the Wii Menu icon). 1. Launch the vWii Mii Channel. - - If Wuphax has successfully been injected, you will now see the scam warning screen. + - If Wuphax has successfully been injected, you will now see the scam warning screen. 1. Wait until you see `Press 1 to continue` and then press the `1` button. 1. Select `continue`, Install The Homebrew Channel and `Yes, continue`. 1. If The Homebrew Channel has successfully been installed, select `continue` and then `exit`. @@ -62,8 +62,8 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch the [Homebrew Launcher](vwii/browser-exploit). 1. Launch Wuphax. 1. Press `B` to restore the Mii Channel then wait until it says Mii Channel restored!. - - You will be taken back to the Wii U Menu after a few seconds. - - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). + - You will be taken back to the Wii U Menu after a few seconds. + - If for some reason, you cannot restore your backup, you will need to [reinstall your Mii Channel](recover-vwii-ioses-channels). ### Installing cIOSes @@ -75,19 +75,19 @@ In case anything goes wrong in the later process and your vWii ends up bricked, 1. Launch The Homebrew Channel. 1. Launch d2x cIOS Installer. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `56` - - Select cIOS slot: `249` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `56` + - Select cIOS slot: `249` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `57` - - Select cIOS slot: `250` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `57` + - Select cIOS slot: `250` 1. Press the `A` button to install. 1. Set everything to match the following: - - Select cIOS: `v10 d2x-v10-beta52-vWii` - - Select cIOS base: `58` - - Select cIOS slot: `251` + - Select cIOS: `v10 d2x-v10-beta52-vWii` + - Select cIOS base: `58` + - Select cIOS slot: `251` 1. Press the `A` button to install. 1. Press the `B` button to exit.